[U-Boot] [PATCH 6/9] ARM: sunxi: Add support for R_PIO gpio banks

[Chen-Yu Tsai]

From: Hans de Goede <hdegoede at redhat.com>

The A31, A23 and later SoCs have an extra pin controller, called CPUs_PIO
or R_PIO, which handles pin banks L and beyond.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
[wens at csie.org: expanded commit message]
[wens at csie.org: add pin bank M and expand comments]
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 arch/arm/include/asm/arch-sunxi/gpio.h | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index b94ec4d..bbe815a 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -10,6 +10,7 @@
 #define _SUNXI_GPIO_H
 
 #include <linux/types.h>
+#include <asm/arch/cpu.h>
 
 /*
  * sunxi has 9 banks of gpio, they are:
@@ -29,6 +30,19 @@
 #define SUNXI_GPIO_I	8
 #define SUNXI_GPIO_BANKS 9
 
+/*
+ * sun6i/sun8i and later SoCs have an additional GPIO controller (R_PIO)
+ * at a different register offset.
+ *
+ * sun6i has 2 banks:
+ * PL0 - PL8  | PM0 - PM7
+ *
+ * sun8i has 1 bank:
+ * PL0 - PL11
+ */
+#define SUNXI_GPIO_L	9
+#define SUNXI_GPIO_M	10
+
 struct sunxi_gpio {
 	u32 cfg[4];
 	u32 dat;
@@ -50,8 +64,9 @@ struct sunxi_gpio_reg {
 	struct sunxi_gpio_int gpio_int;
 };
 
-#define BANK_TO_GPIO(bank) \
-	&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank]
+#define BANK_TO_GPIO(bank)	(((bank) < SUNXI_GPIO_BANKS) ? \
+	&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \
+	&((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) - SUNXI_GPIO_BANKS])
 
 #define GPIO_BANK(pin)		((pin) >> 5)
 #define GPIO_NUM(pin)		((pin) & 0x1f)
@@ -75,6 +90,8 @@ struct sunxi_gpio_reg {
 #define SUNXI_GPIO_G_NR		32
 #define SUNXI_GPIO_H_NR		32
 #define SUNXI_GPIO_I_NR		32
+#define SUNXI_GPIO_L_NR		32
+#define SUNXI_GPIO_M_NR		32
 
 #define SUNXI_GPIO_NEXT(__gpio) \
 	((__gpio##_START) + (__gpio##_NR) + 0)
@@ -89,6 +106,8 @@ enum sunxi_gpio_number {
 	SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F),
 	SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G),
 	SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
+	SUNXI_GPIO_L_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_I),
+	SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L),
 };
 
 /* SUNXI GPIO number definitions */
@@ -101,6 +120,8 @@ enum sunxi_gpio_number {
 #define SUNXI_GPG(_nr)	(SUNXI_GPIO_G_START + (_nr))
 #define SUNXI_GPH(_nr)	(SUNXI_GPIO_H_START + (_nr))
 #define SUNXI_GPI(_nr)	(SUNXI_GPIO_I_START + (_nr))
+#define SUNXI_GPL(_nr)	(SUNXI_GPIO_L_START + (_nr))
+#define SUNXI_GPM(_nr)	(SUNXI_GPIO_M_START + (_nr))
 
 /* GPIO pin function config */
 #define SUNXI_GPIO_INPUT	0
-- 
2.1.1