[U-Boot] [PATCH 6/9] ARM: sunxi: Add support for R_PIO gpio banks

[Ian Campbell]

On Tue, 2014-10-07 at 15:11 +0800, Chen-Yu Tsai wrote:
> From: Hans de Goede <hdegoede at redhat.com>
> 
> The A31, A23 and later SoCs have an extra pin controller, called CPUs_PIO
> or R_PIO, which handles pin banks L and beyond.

Does it also have enough space for 9 banks? Since you overlay a struct
sunxi_gpio_reg on it which has a gpio_bank[SUNXI_GPIO_BANKS] over it.

SUNXI_GPIO_BANKS is now also confusingly named since it is really
"number of banks on the first/original GPIO controller". Eventually
someone will use it as the actual total and be very sad.

I think it might be best if we retcon some distinct name onto the
original GPIO controller so we can have SUNXIO_GPIO_BLA_BANKS and
SUNXI_GPIO_R_BANKS (or even just call them controller 0 and 1 and have
SUNXI_GPIO0_BANKS and SUNXI_GPIO1_BANKS, if that's not too confusing)

If we still need SUNXI_GPIO_BANKS after that then it would be the sum of
those two.

> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> [wens at csie.org: expanded commit message]
> [wens at csie.org: add pin bank M and expand comments]
> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> ---
>  arch/arm/include/asm/arch-sunxi/gpio.h | 25 +++++++++++++++++++++++--
>  1 file changed, 23 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
> index b94ec4d..bbe815a 100644
> --- a/arch/arm/include/asm/arch-sunxi/gpio.h
> +++ b/arch/arm/include/asm/arch-sunxi/gpio.h
> @@ -10,6 +10,7 @@
>  #define _SUNXI_GPIO_H
>  
>  #include <linux/types.h>
> +#include <asm/arch/cpu.h>
>  
>  /*
>   * sunxi has 9 banks of gpio, they are:
> @@ -29,6 +30,19 @@
>  #define SUNXI_GPIO_I	8
>  #define SUNXI_GPIO_BANKS 9
>  
> +/*
> + * sun6i/sun8i and later SoCs have an additional GPIO controller (R_PIO)
> + * at a different register offset.
> + *
> + * sun6i has 2 banks:
> + * PL0 - PL8  | PM0 - PM7
> + *
> + * sun8i has 1 bank:
> + * PL0 - PL11
> + */
> +#define SUNXI_GPIO_L	9
> +#define SUNXI_GPIO_M	10
> +
>  struct sunxi_gpio {
>  	u32 cfg[4];
>  	u32 dat;
> @@ -50,8 +64,9 @@ struct sunxi_gpio_reg {
>  	struct sunxi_gpio_int gpio_int;
>  };
>  
> -#define BANK_TO_GPIO(bank) \
> -	&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank]
> +#define BANK_TO_GPIO(bank)	(((bank) < SUNXI_GPIO_BANKS) ? \
> +	&((struct sunxi_gpio_reg *)SUNXI_PIO_BASE)->gpio_bank[bank] : \
> +	&((struct sunxi_gpio_reg *)SUNXI_R_PIO_BASE)->gpio_bank[(bank) - SUNXI_GPIO_BANKS])
>  
>  #define GPIO_BANK(pin)		((pin) >> 5)
>  #define GPIO_NUM(pin)		((pin) & 0x1f)
> @@ -75,6 +90,8 @@ struct sunxi_gpio_reg {
>  #define SUNXI_GPIO_G_NR		32
>  #define SUNXI_GPIO_H_NR		32
>  #define SUNXI_GPIO_I_NR		32
> +#define SUNXI_GPIO_L_NR		32
> +#define SUNXI_GPIO_M_NR		32
>  
>  #define SUNXI_GPIO_NEXT(__gpio) \
>  	((__gpio##_START) + (__gpio##_NR) + 0)
> @@ -89,6 +106,8 @@ enum sunxi_gpio_number {
>  	SUNXI_GPIO_G_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_F),
>  	SUNXI_GPIO_H_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_G),
>  	SUNXI_GPIO_I_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_H),
> +	SUNXI_GPIO_L_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_I),
> +	SUNXI_GPIO_M_START = SUNXI_GPIO_NEXT(SUNXI_GPIO_L),
>  };
>  
>  /* SUNXI GPIO number definitions */
> @@ -101,6 +120,8 @@ enum sunxi_gpio_number {
>  #define SUNXI_GPG(_nr)	(SUNXI_GPIO_G_START + (_nr))
>  #define SUNXI_GPH(_nr)	(SUNXI_GPIO_H_START + (_nr))
>  #define SUNXI_GPI(_nr)	(SUNXI_GPIO_I_START + (_nr))
> +#define SUNXI_GPL(_nr)	(SUNXI_GPIO_L_START + (_nr))
> +#define SUNXI_GPM(_nr)	(SUNXI_GPIO_M_START + (_nr))
>  
>  /* GPIO pin function config */
>  #define SUNXI_GPIO_INPUT	0