[U-Boot] [PATCH 14/19] trats2: board: add support to dm pmic api
Przemyslaw Marczak
p.marczak at samsung.com
Wed Oct 8 22:48:50 CEST 2014
Changes required to support dm pmic and dm regulator api:
- move call to board_init_i2c() into exynos_init() - earlier init the i2c
- remove redundant ldo setup - default hardware configuration is proper
- adjust pmic/regulator calls to new pmic api
Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
---
board/samsung/trats2/trats2.c | 208 +++++++++++-------------------------------
1 file changed, 52 insertions(+), 156 deletions(-)
diff --git a/board/samsung/trats2/trats2.c b/board/samsung/trats2/trats2.c
index a737749..b107ba5 100644
--- a/board/samsung/trats2/trats2.c
+++ b/board/samsung/trats2/trats2.c
@@ -23,6 +23,7 @@
#include <usb.h>
#include <usb/s3c_udc.h>
#include <usb_mass_storage.h>
+#include <dm.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -151,7 +152,9 @@ int exynos_early_init_f(void)
return 0;
}
+#ifdef CONFIG_DM_PMIC
static int pmic_init_max77686(void);
+#endif
int exynos_init(void)
{
@@ -171,71 +174,16 @@ int exynos_init(void)
writel(0, &pwr->inform4);
writel(0, &pwr->inform5);
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+ board_init_i2c();
+#endif
+
return 0;
}
int exynos_power_init(void)
{
- int chrg;
- struct power_battery *pb;
- struct pmic *p_chrg, *p_muic, *p_fg, *p_bat;
-
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
- board_init_i2c();
-#endif
- pmic_init(I2C_7); /* I2C adapter 7 - bus name s3c24x0_7 */
pmic_init_max77686();
- pmic_init_max77693(I2C_10); /* I2C adapter 10 - bus name soft1 */
- power_muic_init(I2C_10); /* I2C adapter 10 - bus name soft1 */
- power_fg_init(I2C_9); /* I2C adapter 9 - bus name soft0 */
- power_bat_init(0);
-
- p_chrg = pmic_get("MAX77693_PMIC");
- if (!p_chrg) {
- puts("MAX77693_PMIC: Not found\n");
- return -ENODEV;
- }
-
- p_muic = pmic_get("MAX77693_MUIC");
- if (!p_muic) {
- puts("MAX77693_MUIC: Not found\n");
- return -ENODEV;
- }
-
- p_fg = pmic_get("MAX77693_FG");
- if (!p_fg) {
- puts("MAX17042_FG: Not found\n");
- return -ENODEV;
- }
-
- if (p_chrg->chrg->chrg_bat_present(p_chrg) == 0)
- puts("No battery detected\n");
-
- p_bat = pmic_get("BAT_TRATS2");
- if (!p_bat) {
- puts("BAT_TRATS2: Not found\n");
- return -ENODEV;
- }
-
- p_fg->parent = p_bat;
- p_chrg->parent = p_bat;
- p_muic->parent = p_bat;
-
- p_bat->pbat->battery_init(p_bat, p_fg, p_chrg, p_muic);
-
- pb = p_bat->pbat;
- chrg = p_muic->chrg->chrg_type(p_muic);
- debug("CHARGER TYPE: %d\n", chrg);
-
- if (!p_chrg->chrg->chrg_bat_present(p_chrg)) {
- puts("No battery detected\n");
- return 0;
- }
-
- p_fg->fg->fg_battery_check(p_fg, p_bat);
-
- if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
- puts("CHARGE Battery !\n");
return 0;
}
@@ -244,62 +192,22 @@ int exynos_power_init(void)
static int s5pc210_phy_control(int on)
{
int ret = 0;
- unsigned int val;
- struct pmic *p, *p_pmic, *p_muic;
+ struct udevice *pmic;
- p_pmic = pmic_get("MAX77686_PMIC");
- if (!p_pmic)
+ pmic = pmic_get_by_name(UCLASS_PMIC_REGULATOR, "max77686");
+ if (!pmic)
return -ENODEV;
- if (pmic_probe(p_pmic))
- return -1;
-
- p_muic = pmic_get("MAX77693_MUIC");
- if (!p_muic)
- return -ENODEV;
-
- if (pmic_probe(p_muic))
- return -1;
-
if (on) {
- ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_ON);
- if (ret)
- return -1;
-
- p = pmic_get("MAX77693_PMIC");
- if (!p)
- return -ENODEV;
-
- if (pmic_probe(p))
- return -1;
-
- /* SAFEOUT */
- ret = pmic_reg_read(p, MAX77693_SAFEOUT, &val);
- if (ret)
- return -1;
-
- val |= MAX77693_ENSAFEOUT1;
- ret = pmic_reg_write(p, MAX77693_SAFEOUT, val);
+ ret = pmic_set_ldo_mode(pmic, 12, OPMODE_ON);
if (ret)
- return -1;
-
- /* PATH: USB */
- ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
- MAX77693_MUIC_CTRL1_DN1DP2);
-
+ return -EIO;
} else {
- ret = max77686_set_ldo_mode(p_pmic, 12, OPMODE_LPM);
+ ret = pmic_set_ldo_mode(pmic, 12, OPMODE_LPM);
if (ret)
- return -1;
-
- /* PATH: UART */
- ret = pmic_reg_write(p_muic, MAX77693_MUIC_CONTROL1,
- MAX77693_MUIC_CTRL1_UT1UR2);
+ return -EIO;
}
- if (ret)
- return -1;
-
return 0;
}
@@ -319,66 +227,47 @@ int board_usb_init(int index, enum usb_init_type init)
int g_dnl_board_usb_cable_connected(void)
{
+#ifdef CONFIG_POWER
struct pmic *muic = pmic_get("MAX77693_MUIC");
if (!muic)
return 0;
return !!muic->chrg->chrg_type(muic);
+#else
+ return 1;
+#endif
}
#endif
-
+#ifdef CONFIG_DM_PMIC
static int pmic_init_max77686(void)
{
- struct pmic *p = pmic_get("MAX77686_PMIC");
+ struct udevice *p;
- if (pmic_probe(p))
- return -1;
+ p = pmic_get_by_name(UCLASS_PMIC_REGULATOR, "max77686");
+ if (!p) {
+ error("Regulator driver not found");
+ return -ENODEV;
+ }
/* BUCK/LDO Output Voltage */
- max77686_set_ldo_voltage(p, 21, 2800000); /* LDO21 VTF_2.8V */
- max77686_set_ldo_voltage(p, 23, 3300000); /* LDO23 TSP_AVDD_3.3V*/
- max77686_set_ldo_voltage(p, 24, 1800000); /* LDO24 TSP_VDD_1.8V */
+ pmic_set_ldo_val(p, 21, 2800000); /* LDO21 VTF_2.8V */
+ pmic_set_ldo_val(p, 23, 3300000); /* LDO23 TSP_AVDD_3.3V*/
+ pmic_set_ldo_val(p, 24, 1800000); /* LDO24 TSP_VDD_1.8V */
/* BUCK/LDO Output Mode */
- max77686_set_buck_mode(p, 1, OPMODE_STANDBY); /* BUCK1 VMIF_1.1V_AP */
- max77686_set_buck_mode(p, 2, OPMODE_ON); /* BUCK2 VARM_1.0V_AP */
- max77686_set_buck_mode(p, 3, OPMODE_ON); /* BUCK3 VINT_1.0V_AP */
- max77686_set_buck_mode(p, 4, OPMODE_ON); /* BUCK4 VG3D_1.0V_AP */
- max77686_set_buck_mode(p, 5, OPMODE_ON); /* BUCK5 VMEM_1.2V_AP */
- max77686_set_buck_mode(p, 6, OPMODE_ON); /* BUCK6 VCC_SUB_1.35V*/
- max77686_set_buck_mode(p, 7, OPMODE_ON); /* BUCK7 VCC_SUB_2.0V */
- max77686_set_buck_mode(p, 8, OPMODE_OFF); /* VMEM_VDDF_2.85V */
- max77686_set_buck_mode(p, 9, OPMODE_OFF); /* CAM_ISP_CORE_1.2V*/
-
- max77686_set_ldo_mode(p, 1, OPMODE_LPM); /* LDO1 VALIVE_1.0V_AP*/
- max77686_set_ldo_mode(p, 2, OPMODE_STANDBY); /* LDO2 VM1M2_1.2V_AP */
- max77686_set_ldo_mode(p, 3, OPMODE_LPM); /* LDO3 VCC_1.8V_AP */
- max77686_set_ldo_mode(p, 4, OPMODE_LPM); /* LDO4 VCC_2.8V_AP */
- max77686_set_ldo_mode(p, 5, OPMODE_OFF); /* LDO5_VCC_1.8V_IO */
- max77686_set_ldo_mode(p, 6, OPMODE_STANDBY); /* LDO6 VMPLL_1.0V_AP */
- max77686_set_ldo_mode(p, 7, OPMODE_STANDBY); /* LDO7 VPLL_1.0V_AP */
- max77686_set_ldo_mode(p, 8, OPMODE_LPM); /* LDO8 VMIPI_1.0V_AP */
- max77686_set_ldo_mode(p, 9, OPMODE_OFF); /* CAM_ISP_MIPI_1.2*/
- max77686_set_ldo_mode(p, 10, OPMODE_LPM); /* LDO10 VMIPI_1.8V_AP*/
- max77686_set_ldo_mode(p, 11, OPMODE_STANDBY); /* LDO11 VABB1_1.8V_AP*/
- max77686_set_ldo_mode(p, 12, OPMODE_LPM); /* LDO12 VUOTG_3.0V_AP*/
- max77686_set_ldo_mode(p, 13, OPMODE_OFF); /* LDO13 VC2C_1.8V_AP */
- max77686_set_ldo_mode(p, 14, OPMODE_STANDBY); /* VABB02_1.8V_AP */
- max77686_set_ldo_mode(p, 15, OPMODE_STANDBY); /* LDO15 VHSIC_1.0V_AP*/
- max77686_set_ldo_mode(p, 16, OPMODE_STANDBY); /* LDO16 VHSIC_1.8V_AP*/
- max77686_set_ldo_mode(p, 17, OPMODE_OFF); /* CAM_SENSOR_CORE_1.2*/
- max77686_set_ldo_mode(p, 18, OPMODE_OFF); /* CAM_ISP_SEN_IO_1.8V*/
- max77686_set_ldo_mode(p, 19, OPMODE_OFF); /* LDO19 VT_CAM_1.8V */
- max77686_set_ldo_mode(p, 20, OPMODE_ON); /* LDO20 VDDQ_PRE_1.8V*/
- max77686_set_ldo_mode(p, 21, OPMODE_OFF); /* LDO21 VTF_2.8V */
- max77686_set_ldo_mode(p, 22, OPMODE_OFF); /* LDO22 VMEM_VDD_2.8V*/
- max77686_set_ldo_mode(p, 23, OPMODE_OFF); /* LDO23 TSP_AVDD_3.3V*/
- max77686_set_ldo_mode(p, 24, OPMODE_OFF); /* LDO24 TSP_VDD_1.8V */
- max77686_set_ldo_mode(p, 25, OPMODE_OFF); /* LDO25 VCC_3.3V_LCD */
- max77686_set_ldo_mode(p, 26, OPMODE_OFF); /*LDO26 VCC_3.0V_MOTOR*/
+ pmic_set_buck_mode(p, 1, OPMODE_STANDBY); /* BUCK1 VMIF_1.1V_AP */
+ pmic_set_buck_mode(p, 2, OPMODE_ON); /* BUCK2 VARM_1.0V_AP */
+ pmic_set_buck_mode(p, 3, OPMODE_ON); /* BUCK3 VINT_1.0V_AP */
+ pmic_set_buck_mode(p, 4, OPMODE_ON); /* BUCK4 VG3D_1.0V_AP */
+ pmic_set_buck_mode(p, 5, OPMODE_ON); /* BUCK5 VMEM_1.2V_AP */
+ pmic_set_buck_mode(p, 6, OPMODE_ON); /* BUCK6 VCC_SUB_1.35V*/
+ pmic_set_buck_mode(p, 7, OPMODE_ON); /* BUCK7 VCC_SUB_2.0V */
+ pmic_set_buck_mode(p, 8, OPMODE_OFF); /* VMEM_VDDF_2.85V */
+ pmic_set_buck_mode(p, 9, OPMODE_OFF); /* CAM_ISP_CORE_1.2V*/
return 0;
}
+#endif
/*
* LCD
@@ -387,19 +276,27 @@ static int pmic_init_max77686(void)
#ifdef CONFIG_LCD
int mipi_power(void)
{
- struct pmic *p = pmic_get("MAX77686_PMIC");
+ struct udevice *p = pmic_get_by_name(UCLASS_PMIC_REGULATOR, "max77686");
+ if (!p) {
+ error("Regulator driver not found");
+ return -ENODEV;
+ }
/* LDO8 VMIPI_1.0V_AP */
- max77686_set_ldo_mode(p, 8, OPMODE_ON);
+ pmic_set_ldo_mode(p, 8, OPMODE_ON);
/* LDO10 VMIPI_1.8V_AP */
- max77686_set_ldo_mode(p, 10, OPMODE_ON);
+ pmic_set_ldo_mode(p, 10, OPMODE_ON);
return 0;
}
void exynos_lcd_power_on(void)
{
- struct pmic *p = pmic_get("MAX77686_PMIC");
+ struct udevice *p = pmic_get_by_name(UCLASS_PMIC_REGULATOR, "max77686");
+ if (!p) {
+ error("Regulator driver not found\n");
+ return;
+ }
/* LCD_2.2V_EN: GPC0[1] */
gpio_request(EXYNOS4X12_GPIO_C01, "lcd_2v2_en");
@@ -407,9 +304,8 @@ void exynos_lcd_power_on(void)
gpio_direction_output(EXYNOS4X12_GPIO_C01, 1);
/* LDO25 VCC_3.1V_LCD */
- pmic_probe(p);
- max77686_set_ldo_voltage(p, 25, 3100000);
- max77686_set_ldo_mode(p, 25, OPMODE_LPM);
+ pmic_set_ldo_val(p, 25, 3100000);
+ pmic_set_ldo_mode(p, 25, OPMODE_ON);
}
void exynos_reset_lcd(void)
--
1.9.1
More information about the U-Boot
mailing list