[U-Boot] [PATCH 02/32] nitrogen6x: simplify board_mmc_getcd

[Eric Nelson]

From: Troy Kisky <troy.kisky at boundarydevices.com>

The same logic applies to both SD card slots, only with different
GPIOs and the code should make that easier to see.

Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
---
 board/boundary/nitrogen6x/nitrogen6x.c | 14 ++++----------
 1 file changed, 4 insertions(+), 10 deletions(-)

diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 1a6edac..e8cc243 100644
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -279,17 +279,11 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = {
 int board_mmc_getcd(struct mmc *mmc)
 {
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-	int ret;
-
-	if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
-		gpio_direction_input(IMX_GPIO_NR(7, 0));
-		ret = !gpio_get_value(IMX_GPIO_NR(7, 0));
-	} else {
-		gpio_direction_input(IMX_GPIO_NR(2, 6));
-		ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
-	}
+	int gp_cd = (cfg->esdhc_base == USDHC3_BASE_ADDR) ? IMX_GPIO_NR(7, 0) :
+			IMX_GPIO_NR(2, 6);
 
-	return ret;
+	gpio_direction_input(gp_cd);
+	return !gpio_get_value(gp_cd);
 }
 
 int board_mmc_init(bd_t *bis)
-- 
1.9.1