[U-Boot] [PATCH] Freescale t104x: Do not exclude SGMII
Joakim Tjernlund
Joakim.Tjernlund at transmode.se
Fri Oct 24 16:49:02 CEST 2014
fman_port_enet_if() tests if FM1_DTSEC2 or FM1_DTSEC4 uses
RGMII or MII and if not returns PHY_INTERFACE_MODE_NONE.
This excludes testing for SGMII further down.
Remove the unconditional "else return PHY_INTERFACE_MODE_NONE"
so SGMII can be tested too.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund at transmode.se>
---
drivers/net/fm/t1040.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/net/fm/t1040.c b/drivers/net/fm/t1040.c
index 4cce46d..d2a097e 100644
--- a/drivers/net/fm/t1040.c
+++ b/drivers/net/fm/t1040.c
@@ -25,8 +25,6 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII)
return PHY_INTERFACE_MODE_MII;
- else
- return PHY_INTERFACE_MODE_NONE;
}
if ((port == FM1_DTSEC4) &&
@@ -38,8 +36,6 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
FSL_CORENET_RCWSR13_EC1_FM1_DTSEC4_MII)
return PHY_INTERFACE_MODE_MII;
- else
- return PHY_INTERFACE_MODE_NONE;
}
if (port == FM1_DTSEC5) {
--
1.8.5.5
More information about the U-Boot
mailing list