[U-Boot] [PATCH v2 1/5] sunxi: Add mmc card-detect functionality

[Hans de Goede]

Hi,

On 10/11/2014 05:39 PM, Ian Campbell wrote:
> On Mon, 2014-10-06 at 19:57 +0200, Hans de Goede wrote:
>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> 
> I presume that adding GPIO support to SPL isn't a problem size wise?

We do link time size checking and "./MAKEALL -s sunxi" still works fine,
so yes it is not a problem.

>> ---
>>  board/sunxi/Kconfig            | 26 ++++++++++++++++++++++++++
>>  drivers/mmc/sunxi_mmc.c        | 21 +++++++++++++++++++++
>>  include/configs/sunxi-common.h |  1 +
>>  3 files changed, 48 insertions(+)
>>
>> diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
>> index 622f7b4..497b093 100644
>> --- a/board/sunxi/Kconfig
>> +++ b/board/sunxi/Kconfig
>> @@ -32,4 +32,30 @@ config USB_KEYBOARD
>>  	Say Y here to add support for using a USB keyboard (typically used
>>  	in combination with a graphical console on HDMI).
>>  
>> +config MMC0_CD_PIN
>> +	string "Card detect pin for mmc0"
>> +	default ""
>> +	---help---
>> +	Set the card detect pin for mmc0, leave empty to not use cd.
> 
> sunxi_name_to_gpio() doesn't handle the empty string directly, but I
> think it will do the right thing (i.e. return -1) via a more or less
> convoluted path. Did you check this?

Yes I checked, it will return -1 on the empty string.

> Assuming you have then: Acked-by: Ian Campbell <ijc at hellion.org.uk>

Regards,

Hans