[U-Boot] git bisect failed

[Fabio Estevam]

Hi Christian,

On Tue, Oct 21, 2014 at 9:43 AM, Christian Gmeiner
<christian.gmeiner at gmail.com> wrote:
> Hi all.
>
> Finally I got basic board support for OT1200 into upstream, but the
> last released
> version fails to detect SPI flash (read only ff's).

I can confirm that 2014.10 has a SPI probe issue on a mx6qsabresd as well:

U-Boot 2014.10 (Oct 21 2014 - 14:45:04)

CPU:   Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: MX6-SabreSD
I2C:   ready
DRAM:  1 GiB
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Display: HDMI (1024x768)
In:    serial
Out:   serial
Err:   serial
PMIC:  PFUZE100 ID=0x10
Net:   FEC [PRIME]
Hit any key to stop autoboot:  0
=> sf probe
SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000
Failed to initialize SPI flash at 0:0
=>