[U-Boot] [PATCH v3 4/7] DMC: Exynos5: Enable update mode for DREX controller
Akshay Saraswat
akshay.s at samsung.com
Fri Oct 31 09:55:51 CET 2014
From: Alim Akhtar <alim.akhtar at samsung.com>
As per Exynos5800 UM ver 0.00 section 17.13.2.1
CONCONTROL register bit 3 [update_mode], Exynos5800 does not
support the PHY initiated update. And it is recommanded to
set this field to 1'b1 during initialization. This patch sets this bit.
Applying MC-initiated mode makes DDL tracking ON, that helps in
compensate MIF voltage variation.
Signed-off-by: Alim Akhtar <alim.akhtar at samsung.com>
Signed-off-by: Doug Anderson <dianders at chromium.org>
Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
---
Changes since v2:
- Rebased this patch
Changes since v1:
- Rebased this patch
arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c | 19 +++++++++++++++++++
arch/arm/include/asm/arch-exynos/dmc.h | 1 +
2 files changed, 20 insertions(+)
diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
index b86dd2d..4d73b45 100644
--- a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
+++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
@@ -832,6 +832,25 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
setbits_le32(&drex0->cgcontrol, DMC_INTERNAL_CG);
setbits_le32(&drex1->cgcontrol, DMC_INTERNAL_CG);
+ /*
+ * As per Exynos5800 UM ver 0.00 section 17.13.2.1
+ * CONCONTROL register bit 3 [update_mode], Exynos5800 does not
+ * support the PHY initiated update. And it is recommended to set
+ * this field to 1'b1 during initialization
+ *
+ * When we apply PHY-initiated mode, DLL lock value is determined
+ * once at DMC init time and not updated later when we change the MIF
+ * voltage based on ASV group in kernel. Applying MC-initiated mode
+ * makes sure that DLL tracing is ON so that silicon is able to
+ * compensate the voltage variation.
+ */
+ val = readl(&drex0->concontrol);
+ val |= CONCONTROL_UPDATE_MODE;
+ writel(val , &drex0->concontrol);
+ val = readl(&drex1->concontrol);
+ val |= CONCONTROL_UPDATE_MODE;
+ writel(val , &drex1->concontrol);
+
return 0;
}
#endif
diff --git a/arch/arm/include/asm/arch-exynos/dmc.h b/arch/arm/include/asm/arch-exynos/dmc.h
index ec3f9b6..4990a1a 100644
--- a/arch/arm/include/asm/arch-exynos/dmc.h
+++ b/arch/arm/include/asm/arch-exynos/dmc.h
@@ -450,6 +450,7 @@ enum mem_manuf {
#define CONCONTROL_RD_FETCH_SHIFT 12
#define CONCONTROL_RD_FETCH_MASK (0x7 << CONCONTROL_RD_FETCH_SHIFT)
#define CONCONTROL_AREF_EN_SHIFT 5
+#define CONCONTROL_UPDATE_MODE (1 << 3)
/* PRECHCONFIG register field */
#define PRECHCONFIG_TP_CNT_SHIFT 24
--
1.9.1
More information about the U-Boot
mailing list