[U-Boot] [PATCH v3 7/7] Peach-Pi: Use the enhanced usb_copy() prototype

Akshay Saraswat akshay.s at samsung.com
Fri Oct 31 09:55:54 CET 2014


From: Vadim Bendebury <vbendeb at chromium.org>

Exynos5800 IROM has a different, from 5250 and 5420, prototype of the
usb_copy() function. Luckily the earlier version did not expect any
arguments, which means the same code could be used with old and new
SoCs, the old ones just ignoring the arguments.

Signed-off-by: Vadim Bendebury <vbendeb at chromium.org>
Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
---
Changes since v2:
	- Added in this patch-set.

 arch/arm/cpu/armv7/exynos/spl_boot.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/arch/arm/cpu/armv7/exynos/spl_boot.c b/arch/arm/cpu/armv7/exynos/spl_boot.c
index 658e4cb..dbd312c 100644
--- a/arch/arm/cpu/armv7/exynos/spl_boot.c
+++ b/arch/arm/cpu/armv7/exynos/spl_boot.c
@@ -195,10 +195,16 @@ void copy_uboot_to_ram(void)
 	void (*end_bootop_from_emmc)(void);
 #endif
 #ifdef CONFIG_USB_BOOTING
-	u32 (*usb_copy)(void);
 	int is_cr_z_set;
 	unsigned int sec_boot_check;
 
+	/*
+	 * Note that older hardware (before Exynos5800) does not expect any
+	 * arguments, but it does not hurt to pass them, so a common function
+	 * prototype is used.
+	 */
+	u32 (*usb_copy)(u32 num_of_block, u32 *dst);
+
 	/* Read iRAM location to check for secondary USB boot mode */
 	sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE);
 	if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT)
@@ -240,7 +246,7 @@ void copy_uboot_to_ram(void)
 		 */
 		is_cr_z_set = config_branch_prediction(0);
 		usb_copy = get_irom_func(USB_INDEX);
-		usb_copy();
+		usb_copy(0, (u32 *)CONFIG_SYS_TEXT_BASE);
 		config_branch_prediction(is_cr_z_set);
 		break;
 #endif
-- 
1.9.1



More information about the U-Boot mailing list