[U-Boot] [PATCH v3 6/7] Exynos5: ddr3: Choose between single or double channel config

[Akshay Saraswat]

Add a 4G configuration and choose it based on the number of banks
declared in config file. A board with 4 SDRAM banks declared (as
per CONFIG_NR_DRAM_BANKS) will end up with the 2G confiuration.

Signed-off-by: Doug Anderson <dianders at chromium.org>
Signed-off-by: Akshay Saraswat <akshay.s at samsung.com>
---
Changes since v2:
	- Rebased this patch

Changes since v1:
	- Rebased this patch

 arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
index 4d73b45..7c0b12a 100644
--- a/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
+++ b/arch/arm/cpu/armv7/exynos/dmc_init_ddr3.c
@@ -464,6 +464,16 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset)
 							+ DMC_OFFSET);
 	pmu = (struct exynos5_power *)EXYNOS5420_POWER_BASE;
 
+	if (CONFIG_NR_DRAM_BANKS > 4) {
+		/* Need both controllers. */
+		mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_2;
+		mem->chips_per_channel = 2;
+		mem->chips_to_configure = 2;
+	} else {
+		/* 2GB requires a single controller */
+		mem->memcontrol |= DMC_MEMCONTROL_NUM_CHIP_1;
+	}
+
 	/* Enable PAUSE for DREX */
 	setbits_le32(&clk->pause, ENABLE_BIT);
 
-- 
1.9.1