[U-Boot] [PATCH v2 3/7] sunxi: Kconfig: Make SPL_FEL a toplevel Kconfig option
Ian Campbell
ijc at hellion.org.uk
Fri Oct 24 22:20:46 CEST 2014
It's unfortunate that this needs to be present in both .config and spl/.config
since it makes it slightly hard to enable FEL mode for a regular defconfig. It
can be done with:
echo CONFIG_SPL_FEL=y >> .config
echo CONFIG_SPL_FEL=y >> spl/.config
Ideally only one of those would be needed.
Signed-off-by: Ian Campbell <ijc at hellion.org.uk>
---
v2: Symbol should depend on SPL
---
board/sunxi/Kconfig | 5 +++++
configs/Cubieboard2_FEL_defconfig | 3 ++-
configs/Cubietruck_FEL_defconfig | 3 ++-
3 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index ea86630..496bad1 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -37,6 +37,11 @@ config SYS_BOARD
config SYS_SOC
default "sunxi"
+config SPL_FEL
+ bool "SPL/FEL mode support"
+ depends on SPL
+ default n
+
config FDTFILE
string "Default fdtfile env setting for this board"
diff --git a/configs/Cubieboard2_FEL_defconfig b/configs/Cubieboard2_FEL_defconfig
index 1e79720..1b73fb5 100644
--- a/configs/Cubieboard2_FEL_defconfig
+++ b/configs/Cubieboard2_FEL_defconfig
@@ -1,5 +1,6 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD2,SPL_FEL,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
++S:CONFIG_SPL_FEL=y
+CONFIG_SYS_EXTRA_OPTIONS="CUBIEBOARD2,AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-cubieboard2.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
diff --git a/configs/Cubietruck_FEL_defconfig b/configs/Cubietruck_FEL_defconfig
index 963ed5a..7e78aec 100644
--- a/configs/Cubietruck_FEL_defconfig
+++ b/configs/Cubietruck_FEL_defconfig
@@ -1,5 +1,6 @@
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CUBIETRUCK,SPL_FEL,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
++S:CONFIG_SPL_FEL=y
+CONFIG_SYS_EXTRA_OPTIONS="CUBIETRUCK,AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-cubietruck.dtb"
+S:CONFIG_ARM=y
+S:CONFIG_ARCH_SUNXI=y
--
2.1.0
More information about the U-Boot
mailing list