[U-Boot] [PATCH v2 7/7] arm: ls102xa: Add SD boot support for LS1021ATWR board

[Huan Wang]

Hi, York,

> On 09/26/2014 03:33 AM, Alison Wang wrote:
> > This patch adds SD boot support for LS1021ATWR board. SPL framework
> is
> > used. PBL initialize the internal RAM and copy SPL to it, then SPL
> > initialize DDR using SPD and copy u-boot from SD card to DDR, finally
> > SPL transfer control to u-boot.
> >
> > Signed-off-by: Chen Lu <chen.lu at freescale.com>
> > Signed-off-by: Alison Wang <alison.wang at freescale.com>
> > Signed-off-by: Jason Jin <jason.jin at freescale.com>
> > ---
> > Change log:
> >  v2: Use generic u-boot-spl.lds.
> 
> Please update status and maintainers for this board.
>
[Alison Wang] I will update in v3. Thanks.


Best Regards,
Alison Wang