[U-Boot] [PATCH v2 7/7] arm: ls102xa: Add SD boot support for LS1021ATWR board

[York Sun]

On 09/26/2014 03:33 AM, Alison Wang wrote:
> This patch adds SD boot support for LS1021ATWR board. SPL
> framework is used. PBL initialize the internal RAM and copy
> SPL to it, then SPL initialize DDR using SPD and copy u-boot
> from SD card to DDR, finally SPL transfer control to u-boot.
> 
> Signed-off-by: Chen Lu <chen.lu at freescale.com>
> Signed-off-by: Alison Wang <alison.wang at freescale.com>
> Signed-off-by: Jason Jin <jason.jin at freescale.com>
> ---
> Change log:
>  v2: Use generic u-boot-spl.lds.

Please update status and maintainers for this board.

York