[U-Boot] [PATCH v4 29/29] dm: exynos: cros_ec: Move cros_ec_spi to driver model
Simon Glass
sjg at chromium.org
Tue Oct 14 07:42:16 CEST 2014
Adjust this driver to use driver model and move smdk5420 boards over to
use it.
Series-changes 4
- Add review/ack tags for SPI maintainer (Jagan)
Acked-by: Jagannadha Sutradharudu Teki <jagannadh.teki at gmail.com>
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v4: None
Changes in v3: None
Changes in v2: None
drivers/misc/cros_ec_spi.c | 68 +++++++++++++++++++++++++++++++++++++++------
include/configs/peach-pit.h | 1 +
2 files changed, 60 insertions(+), 9 deletions(-)
diff --git a/drivers/misc/cros_ec_spi.c b/drivers/misc/cros_ec_spi.c
index 015333f..89616ce 100644
--- a/drivers/misc/cros_ec_spi.c
+++ b/drivers/misc/cros_ec_spi.c
@@ -15,23 +15,34 @@
#include <common.h>
#include <cros_ec.h>
+#include <dm.h>
+#include <errno.h>
#include <spi.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_DM_CROS_EC
+int cros_ec_spi_packet(struct udevice *udev, int out_bytes, int in_bytes)
+{
+ struct cros_ec_dev *dev = udev->uclass_priv;
+#else
int cros_ec_spi_packet(struct cros_ec_dev *dev, int out_bytes, int in_bytes)
{
+#endif
+ struct spi_slave *slave = dev_get_parentdata(dev->dev);
int rv;
/* Do the transfer */
- if (spi_claim_bus(dev->spi)) {
+ if (spi_claim_bus(slave)) {
debug("%s: Cannot claim SPI bus\n", __func__);
return -1;
}
- rv = spi_xfer(dev->spi, max(out_bytes, in_bytes) * 8,
+ rv = spi_xfer(slave, max(out_bytes, in_bytes) * 8,
dev->dout, dev->din,
SPI_XFER_BEGIN | SPI_XFER_END);
- spi_release_bus(dev->spi);
+ spi_release_bus(slave);
if (rv) {
debug("%s: Cannot complete SPI transfer\n", __func__);
@@ -56,10 +67,19 @@ int cros_ec_spi_packet(struct cros_ec_dev *dev, int out_bytes, int in_bytes)
* @param din_len Maximum size of response in bytes
* @return number of bytes in response, or -1 on error
*/
+#ifdef CONFIG_DM_CROS_EC
+int cros_ec_spi_command(struct udevice *udev, uint8_t cmd, int cmd_version,
+ const uint8_t *dout, int dout_len,
+ uint8_t **dinp, int din_len)
+{
+ struct cros_ec_dev *dev = udev->uclass_priv;
+#else
int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
const uint8_t *dout, int dout_len,
uint8_t **dinp, int din_len)
{
+#endif
+ struct spi_slave *slave = dev_get_parentdata(dev->dev);
int in_bytes = din_len + 4; /* status, length, checksum, trailer */
uint8_t *out;
uint8_t *p;
@@ -92,7 +112,7 @@ int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
*/
memset(dev->din, '\0', in_bytes);
- if (spi_claim_bus(dev->spi)) {
+ if (spi_claim_bus(slave)) {
debug("%s: Cannot claim SPI bus\n", __func__);
return -1;
}
@@ -113,10 +133,10 @@ int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
p = dev->din + sizeof(int64_t) - 2;
len = dout_len + 4;
cros_ec_dump_data("out", cmd, out, len);
- rv = spi_xfer(dev->spi, max(len, in_bytes) * 8, out, p,
+ rv = spi_xfer(slave, max(len, in_bytes) * 8, out, p,
SPI_XFER_BEGIN | SPI_XFER_END);
- spi_release_bus(dev->spi);
+ spi_release_bus(slave);
if (rv) {
debug("%s: Cannot complete SPI transfer\n", __func__);
@@ -146,6 +166,7 @@ int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
return len;
}
+#ifndef CONFIG_DM_CROS_EC
int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob)
{
/* Decode interface-specific FDT params */
@@ -165,11 +186,40 @@ int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob)
*/
int cros_ec_spi_init(struct cros_ec_dev *dev, const void *blob)
{
- dev->spi = spi_setup_slave_fdt(blob, dev->node, dev->parent_node);
- if (!dev->spi) {
+ int ret;
+
+ ret = spi_setup_slave_fdt(blob, dev->node, dev->parent_node,
+ &slave);
+ if (ret) {
debug("%s: Could not setup SPI slave\n", __func__);
- return -1;
+ return ret;
}
return 0;
}
+#endif
+
+#ifdef CONFIG_DM_CROS_EC
+int cros_ec_probe(struct udevice *dev)
+{
+ return cros_ec_register(dev);
+}
+
+struct dm_cros_ec_ops cros_ec_ops = {
+ .packet = cros_ec_spi_packet,
+ .command = cros_ec_spi_command,
+};
+
+static const struct udevice_id cros_ec_ids[] = {
+ { .compatible = "google,cros-ec" },
+ { }
+};
+
+U_BOOT_DRIVER(cros_ec_spi) = {
+ .name = "cros_ec",
+ .id = UCLASS_CROS_EC,
+ .of_match = cros_ec_ids,
+ .probe = cros_ec_probe,
+ .ops = &cros_ec_ops,
+};
+#endif
diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h
index ab8ac60..91bd37d 100644
--- a/include/configs/peach-pit.h
+++ b/include/configs/peach-pit.h
@@ -38,6 +38,7 @@
#define CONFIG_POWER_TPS65090_EC
#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */
+#define CONFIG_DM_CROS_EC
#define CONFIG_USB_XHCI
#define CONFIG_USB_XHCI_EXYNOS
--
2.1.0.rc2.206.gedb03e5
More information about the U-Boot
mailing list