[U-Boot] [PATCH] ARM: UniPhier: make pinmon command optional

[Masahiro Yamada]

Add CONFIG_CMD_PINMON to UniPhier-specific Kconfig and make the
"pinmon" command user-configurable.  This command can be disabled
via the configuration if users do not need it.

Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
---
 arch/arm/cpu/armv7/uniphier/Kconfig  | 9 +++++++++
 arch/arm/cpu/armv7/uniphier/Makefile | 2 +-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig
index 34f5496..8906f64 100644
--- a/arch/arm/cpu/armv7/uniphier/Kconfig
+++ b/arch/arm/cpu/armv7/uniphier/Kconfig
@@ -29,4 +29,13 @@ config MACH_PH1_SLD8
 
 endchoice
 
+config CMD_PINMON
+	bool "Enable boot mode pins monitor command"
+	depends on !SPL_BUILD
+	default y
+	help
+	  The command "pinmon" shows the state of the boot mode pins.
+	  The boot mode pins are latched when the system reset is deasserted
+	  and determine which device the system should load a boot image from.
+
 endmenu
diff --git a/arch/arm/cpu/armv7/uniphier/Makefile b/arch/arm/cpu/armv7/uniphier/Makefile
index 7ceddda..dd57469 100644
--- a/arch/arm/cpu/armv7/uniphier/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/Makefile
@@ -12,7 +12,7 @@ obj-y += dram_init.o
 obj-$(CONFIG_DISPLAY_CPUINFO) += cpu_info.o
 obj-$(CONFIG_BOARD_LATE_INIT) += board_late_init.o
 obj-$(CONFIG_UNIPHIER_SMP) += smp.o
-obj-$(if $(CONFIG_SPL_BUILD),,y) += cmd_pinmon.o
+obj-$(CONFIG_CMD_PINMON) += cmd_pinmon.o
 
 obj-y += board_common.o
 obj-$(CONFIG_PFC_MICRO_SUPPORT_CARD) += support_card.o
-- 
1.9.1