[U-Boot] [PATCH 4/9] ppc: Zap Hymod board
Marek Vasut
marex at denx.de
Wed Oct 22 21:34:48 CEST 2014
Remove this board as this is the only one last user of eeprom_probe(),
which is pretty non-standard stuff.
This patch also removes all the PHP, SQL and CSS stuff from U-Boot,
which probably makes U-Boot a bit less IoT ;-)
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Masahiro Yamada <yamada.m at jp.panasonic.com>
Cc: Tom Rini <trini at ti.com>
Cc: Wolfgang Denk <wd at denx.de>
Cc: Simon Glass <sjg at chromium.org>
Cc: Heiko Schocher <hs at denx.de>
---
arch/powerpc/cpu/mpc8260/Kconfig | 4 -
arch/powerpc/cpu/mpc8260/ether_fcc.c | 27 +-
arch/powerpc/cpu/mpc8260/interrupts.c | 10 +-
arch/powerpc/cpu/mpc8260/start.S | 14 -
arch/powerpc/cpu/mpc83xx/start.S | 11 -
arch/powerpc/include/asm/u-boot.h | 3 -
board/hymod/Kconfig | 9 -
board/hymod/MAINTAINERS | 6 -
board/hymod/Makefile | 8 -
board/hymod/bsp.c | 387 ------------------
board/hymod/config.mk | 14 -
board/hymod/eeprom.c | 678 -------------------------------
board/hymod/env.c | 221 -----------
board/hymod/fetch.c | 91 -----
board/hymod/flash.c | 490 -----------------------
board/hymod/flash.h | 140 -------
board/hymod/global_env | 145 -------
board/hymod/hymod.c | 521 ------------------------
board/hymod/hymod.h | 305 --------------
board/hymod/input.c | 91 -----
board/hymod/u-boot.lds | 132 ------
board/hymod/u-boot.lds.debug | 121 ------
configs/hymod_defconfig | 3 -
doc/README.scrapyard | 1 +
include/asm-generic/u-boot.h | 3 -
include/common.h | 3 -
include/configs/hymod.h | 728 ----------------------------------
tools/bddb/README | 116 ------
tools/bddb/badsubmit.php | 23 --
tools/bddb/bddb.css | 207 ----------
tools/bddb/brlog.php | 109 -----
tools/bddb/browse.php | 147 -------
tools/bddb/config.php | 16 -
tools/bddb/create_tables.sql | 90 -----
tools/bddb/defs.php | 710 ---------------------------------
tools/bddb/dodelete.php | 65 ---
tools/bddb/dodellog.php | 57 ---
tools/bddb/doedit.php | 186 ---------
tools/bddb/doedlog.php | 76 ----
tools/bddb/donew.php | 230 -----------
tools/bddb/donewlog.php | 86 ----
tools/bddb/edit.php | 131 ------
tools/bddb/edlog.php | 86 ----
tools/bddb/execute.php | 33 --
tools/bddb/index.php | 38 --
tools/bddb/new.php | 120 ------
tools/bddb/newlog.php | 54 ---
47 files changed, 3 insertions(+), 6743 deletions(-)
delete mode 100644 board/hymod/Kconfig
delete mode 100644 board/hymod/MAINTAINERS
delete mode 100644 board/hymod/Makefile
delete mode 100644 board/hymod/bsp.c
delete mode 100644 board/hymod/config.mk
delete mode 100644 board/hymod/eeprom.c
delete mode 100644 board/hymod/env.c
delete mode 100644 board/hymod/fetch.c
delete mode 100644 board/hymod/flash.c
delete mode 100644 board/hymod/flash.h
delete mode 100644 board/hymod/global_env
delete mode 100644 board/hymod/hymod.c
delete mode 100644 board/hymod/hymod.h
delete mode 100644 board/hymod/input.c
delete mode 100644 board/hymod/u-boot.lds
delete mode 100644 board/hymod/u-boot.lds.debug
delete mode 100644 configs/hymod_defconfig
delete mode 100644 include/configs/hymod.h
delete mode 100644 tools/bddb/README
delete mode 100644 tools/bddb/badsubmit.php
delete mode 100644 tools/bddb/bddb.css
delete mode 100644 tools/bddb/brlog.php
delete mode 100644 tools/bddb/browse.php
delete mode 100644 tools/bddb/config.php
delete mode 100644 tools/bddb/create_tables.sql
delete mode 100644 tools/bddb/defs.php
delete mode 100644 tools/bddb/dodelete.php
delete mode 100644 tools/bddb/dodellog.php
delete mode 100644 tools/bddb/doedit.php
delete mode 100644 tools/bddb/doedlog.php
delete mode 100644 tools/bddb/donew.php
delete mode 100644 tools/bddb/donewlog.php
delete mode 100644 tools/bddb/edit.php
delete mode 100644 tools/bddb/edlog.php
delete mode 100644 tools/bddb/execute.php
delete mode 100644 tools/bddb/index.php
delete mode 100644 tools/bddb/new.php
delete mode 100644 tools/bddb/newlog.php
diff --git a/arch/powerpc/cpu/mpc8260/Kconfig b/arch/powerpc/cpu/mpc8260/Kconfig
index 41e4e5f..7f246ff 100644
--- a/arch/powerpc/cpu/mpc8260/Kconfig
+++ b/arch/powerpc/cpu/mpc8260/Kconfig
@@ -28,9 +28,6 @@ config TARGET_EP82XXM
config TARGET_GW8260
bool "Support gw8260"
-config TARGET_HYMOD
- bool "Support hymod"
-
config TARGET_IPHASE4539
bool "Support IPHASE4539"
@@ -78,7 +75,6 @@ source "board/ep82xxm/Kconfig"
source "board/freescale/mpc8266ads/Kconfig"
source "board/funkwerk/vovpn-gw/Kconfig"
source "board/gw8260/Kconfig"
-source "board/hymod/Kconfig"
source "board/ids/ids8247/Kconfig"
source "board/iphase4539/Kconfig"
source "board/keymile/km82xx/Kconfig"
diff --git a/arch/powerpc/cpu/mpc8260/ether_fcc.c b/arch/powerpc/cpu/mpc8260/ether_fcc.c
index d93a991..f9f15b5 100644
--- a/arch/powerpc/cpu/mpc8260/ether_fcc.c
+++ b/arch/powerpc/cpu/mpc8260/ether_fcc.c
@@ -645,32 +645,7 @@ eth_loopback_test (void)
/* 28.9 - (1-2): ioports have been set up already */
-#if defined(CONFIG_HYMOD)
- /*
- * Attention: this is board-specific
- * 0, FCC1
- * 1, FCC2
- * 2, FCC3
- */
-# define FCC_START_LOOP 0
-# define FCC_END_LOOP 2
-
- /*
- * Attention: this is board-specific
- * - FCC1 Rx-CLK is CLK10
- * - FCC1 Tx-CLK is CLK11
- * - FCC2 Rx-CLK is CLK13
- * - FCC2 Tx-CLK is CLK14
- * - FCC3 Rx-CLK is CLK15
- * - FCC3 Tx-CLK is CLK16
- */
-
- /* 28.9 - (3): connect FCC's tx and rx clocks */
- immr->im_cpmux.cmx_uar = 0;
- immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\
- CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\
- CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16;
-#elif defined(CONFIG_SACSng)
+#if defined(CONFIG_SACSng)
/*
* Attention: this is board-specific
* 1, FCC2
diff --git a/arch/powerpc/cpu/mpc8260/interrupts.c b/arch/powerpc/cpu/mpc8260/interrupts.c
index 30125a7..41d2c04 100644
--- a/arch/powerpc/cpu/mpc8260/interrupts.c
+++ b/arch/powerpc/cpu/mpc8260/interrupts.c
@@ -142,15 +142,7 @@ int interrupt_init_cpu (unsigned *decrementer_count)
immr->im_intctl.ic_sipnrh = 0xffffffff;
immr->im_intctl.ic_sipnrl = 0xffffffff;
-#ifdef CONFIG_HYMOD
- /*
- * ensure all external interrupt sources default to trigger on
- * high-to-low transition (i.e. edge triggered active low)
- */
- immr->im_intctl.ic_siexr = -1;
-#endif
-
- return (0);
+ return 0;
}
/****************************************************************************/
diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S
index d7eaf13..5f1e174 100644
--- a/arch/powerpc/cpu/mpc8260/start.S
+++ b/arch/powerpc/cpu/mpc8260/start.S
@@ -48,9 +48,6 @@
GOT_ENTRY(__init_end)
GOT_ENTRY(__bss_end)
GOT_ENTRY(__bss_start)
-#if defined(CONFIG_HYMOD)
- GOT_ENTRY(environment)
-#endif
END_GOT
/*
@@ -878,18 +875,7 @@ clear_bss:
* Now clear BSS segment
*/
lwz r3,GOT(__bss_start)
-#if defined(CONFIG_HYMOD)
- /*
- * For HYMOD - the environment is the very last item in flash.
- * The real .bss stops just before environment starts, so only
- * clear up to that point.
- *
- * taken from mods for FADS board
- */
- lwz r4,GOT(environment)
-#else
lwz r4,GOT(__bss_end)
-#endif
cmplw 0, r3, r4
beq 6f
diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.S
index 36724e5..af75c63 100644
--- a/arch/powerpc/cpu/mpc83xx/start.S
+++ b/arch/powerpc/cpu/mpc83xx/start.S
@@ -958,18 +958,7 @@ clear_bss:
* Now clear BSS segment
*/
lwz r3,GOT(__bss_start)
-#if defined(CONFIG_HYMOD)
- /*
- * For HYMOD - the environment is the very last item in flash.
- * The real .bss stops just before environment starts, so only
- * clear up to that point.
- *
- * taken from mods for FADS board
- */
- lwz r4,GOT(environment)
-#else
lwz r4,GOT(__bss_end)
-#endif
cmplw 0, r3, r4
beq 6f
diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h
index e1b566f..a61e998 100644
--- a/arch/powerpc/include/asm/u-boot.h
+++ b/arch/powerpc/include/asm/u-boot.h
@@ -77,9 +77,6 @@ typedef struct bd_info {
unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
#endif
-#if defined(CONFIG_HYMOD)
- hymod_conf_t bi_hymod_conf; /* hymod configuration information */
-#endif
#ifdef CONFIG_HAS_ETH1
unsigned char bi_enet1addr[6]; /* OLD: see README.enetaddr */
diff --git a/board/hymod/Kconfig b/board/hymod/Kconfig
deleted file mode 100644
index fa162eb..0000000
--- a/board/hymod/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_HYMOD
-
-config SYS_BOARD
- default "hymod"
-
-config SYS_CONFIG_NAME
- default "hymod"
-
-endif
diff --git a/board/hymod/MAINTAINERS b/board/hymod/MAINTAINERS
deleted file mode 100644
index e27fe97..0000000
--- a/board/hymod/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-HYMOD BOARD
-M: Murray Jensen <Murray.Jensen at csiro.au>
-S: Maintained
-F: board/hymod/
-F: include/configs/hymod.h
-F: configs/hymod_defconfig
diff --git a/board/hymod/Makefile b/board/hymod/Makefile
deleted file mode 100644
index b9080b0..0000000
--- a/board/hymod/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = hymod.o flash.o bsp.o eeprom.o fetch.o input.o env.o
diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c
deleted file mode 100644
index e54640f..0000000
--- a/board/hymod/bsp.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * hacked for Hymod FPGA support by Murray.Jensen at csiro.au, 29-Jan-01
- */
-
-#include <common.h>
-#include <command.h>
-#include <net.h>
-#include <asm/iopin_8260.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*-----------------------------------------------------------------------
- * Board Special Commands: FPGA load/store, EEPROM erase
- */
-
-#if defined(CONFIG_CMD_BSP)
-
-#define LOAD_SUCCESS 0
-#define LOAD_FAIL_NOCONF 1
-#define LOAD_FAIL_NOINIT 2
-#define LOAD_FAIL_NODONE 3
-
-#define STORE_SUCCESS 0
-
-/*
- * Programming the Hymod FPGAs
- *
- * The 8260 io port config table is set up so that the INIT pin is
- * held Low (Open Drain output 0) - this will delay the automatic
- * Power-On config until INIT is released (by making it an input).
- *
- * If the FPGA has been programmed before, then the assertion of PROGRAM
- * will initiate configuration (i.e. it begins clearing the RAM).
- *
- * When the FPGA is ready to receive configuration data (either after
- * releasing INIT after Power-On, or after asserting PROGRAM), it will
- * pull INIT high.
- *
- * Notes from Paul Dunn:
- *
- * 1. program pin should be forced low for >= 300ns
- * (about 20 bus clock cycles minimum).
- *
- * 2. then wait for init to go high, which signals
- * that the FPGA has cleared its internal memory
- * and is ready to load
- *
- * 3. perform load writes of entire config file
- *
- * 4. wait for done to go high, which should be
- * within a few bus clock cycles. If done has not
- * gone high after reasonable period, then load
- * has not worked (wait several ms?)
- */
-
-int
-fpga_load(int mezz, const uchar *addr, ulong size)
-{
- hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
- xlx_info_t *fp;
- xlx_iopins_t *fpgaio;
- volatile uchar *fpgabase;
- volatile uint cnt;
- const uchar *eaddr = addr + size;
- int result;
-
- if (mezz)
- fp = &cp->mezz.xlx[0];
- else
- fp = &cp->main.xlx[0];
-
- if (!fp->mmap.prog.exists)
- return (LOAD_FAIL_NOCONF);
-
- fpgabase = (uchar *)fp->mmap.prog.base;
- fpgaio = &fp->iopins;
-
- /* set enable HIGH if required */
- if (fpgaio->enable_pin.flag)
- iopin_set_high (&fpgaio->enable_pin);
-
- /* ensure INIT is released (set it to be an input) */
- iopin_set_in (&fpgaio->init_pin);
-
- /* toggle PROG Low then High (will already be Low after Power-On) */
- iopin_set_low (&fpgaio->prog_pin);
- udelay (1); /* minimum 300ns - 1usec should do it */
- iopin_set_high (&fpgaio->prog_pin);
-
- /* wait for INIT High */
- cnt = 0;
- while (!iopin_is_high (&fpgaio->init_pin))
- if (++cnt == 10000000) {
- result = LOAD_FAIL_NOINIT;
- goto done;
- }
-
- /* write configuration data */
- while (addr < eaddr)
- *fpgabase = *addr++;
-
- /* wait for DONE High */
- cnt = 0;
- while (!iopin_is_high (&fpgaio->done_pin))
- if (++cnt == 100000000) {
- result = LOAD_FAIL_NODONE;
- goto done;
- }
-
- /* success */
- result = LOAD_SUCCESS;
-
- done:
-
- if (fpgaio->enable_pin.flag)
- iopin_set_low (&fpgaio->enable_pin);
-
- return (result);
-}
-
-/* ------------------------------------------------------------------------- */
-int
-do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
- uchar *addr, *save_addr;
- ulong size;
- int mezz, arg, result;
-
- switch (argc) {
-
- case 0:
- case 1:
- break;
-
- case 2:
- if (strcmp (argv[1], "info") == 0) {
- printf ("\nHymod FPGA Info...\n");
- printf ("\t\t\t\tAddress\t\tSize\n");
- printf ("\tMain Configuration:\t0x%08x\t%d\n",
- FPGA_MAIN_CFG_BASE, FPGA_MAIN_CFG_SIZE);
- printf ("\tMain Register:\t\t0x%08x\t%d\n",
- FPGA_MAIN_REG_BASE, FPGA_MAIN_REG_SIZE);
- printf ("\tMain Port:\t\t0x%08x\t%d\n",
- FPGA_MAIN_PORT_BASE, FPGA_MAIN_PORT_SIZE);
- printf ("\tMezz Configuration:\t0x%08x\t%d\n",
- FPGA_MEZZ_CFG_BASE, FPGA_MEZZ_CFG_SIZE);
- return 0;
- }
- break;
-
- case 3:
- if (strcmp (argv[1], "store") == 0) {
- addr = (uchar *) simple_strtoul (argv[2], NULL, 16);
-
- save_addr = addr;
-#if 0
- /* fpga readback unimplemented */
- while (more readback data)
- *addr++ = *fpga;
- result = error ? STORE_FAIL_XXX : STORE_SUCCESS;
-#else
- result = STORE_SUCCESS;
-#endif
-
- if (result == STORE_SUCCESS) {
- printf ("SUCCEEDED (%d bytes)\n",
- addr - save_addr);
- return 0;
- } else
- printf ("FAILED (%d bytes)\n",
- addr - save_addr);
- return 1;
- }
- break;
-
- case 4:
- if (strcmp (argv[1], "tftp") == 0) {
- copy_filename (BootFile, argv[2], sizeof (BootFile));
- load_addr = simple_strtoul (argv[3], NULL, 16);
- NetBootFileXferSize = 0;
-
- if (NetLoop(TFTPGET) <= 0) {
- printf ("tftp transfer failed - aborting "
- "fgpa load\n");
- return 1;
- }
-
- if (NetBootFileXferSize == 0) {
- printf ("can't determine file size - "
- "aborting fpga load\n");
- return 1;
- }
-
- printf ("File transfer succeeded - "
- "beginning fpga load...");
-
- result = fpga_load (0, (uchar *) load_addr,
- NetBootFileXferSize);
-
- if (result == LOAD_SUCCESS) {
- printf ("SUCCEEDED\n");
- return 0;
- } else if (result == LOAD_FAIL_NOCONF)
- printf ("FAILED (no CONF)\n");
- else if (result == LOAD_FAIL_NOINIT)
- printf ("FAILED (no INIT)\n");
- else
- printf ("FAILED (no DONE)\n");
- return 1;
-
- }
- /* fall through ... */
-
- case 5:
- if (strcmp (argv[1], "load") == 0) {
- if (argc == 5) {
- if (strcmp (argv[2], "main") == 0)
- mezz = 0;
- else if (strcmp (argv[2], "mezz") == 0)
- mezz = 1;
- else {
- printf ("FPGA type must be either "
- "`main' or `mezz'\n");
- return 1;
- }
- arg = 3;
- } else {
- mezz = 0;
- arg = 2;
- }
-
- addr = (uchar *) simple_strtoul (argv[arg++], NULL, 16);
- size = (ulong) simple_strtoul (argv[arg], NULL, 16);
-
- result = fpga_load (mezz, addr, size);
-
- if (result == LOAD_SUCCESS) {
- printf ("SUCCEEDED\n");
- return 0;
- } else if (result == LOAD_FAIL_NOCONF)
- printf ("FAILED (no CONF)\n");
- else if (result == LOAD_FAIL_NOINIT)
- printf ("FAILED (no INIT)\n");
- else
- printf ("FAILED (no DONE)\n");
- return 1;
- }
- break;
-
- default:
- break;
- }
-
- return cmd_usage(cmdtp);
-}
-U_BOOT_CMD(
- fpga, 6, 1, do_fpga,
- "FPGA sub-system",
- "load [type] addr size\n"
- " - write the configuration data at memory address `addr',\n"
- " size `size' bytes, into the FPGA of type `type' (either\n"
- " `main' or `mezz', default `main'). e.g.\n"
- " `fpga load 100000 7d8f'\n"
- " loads the main FPGA with config data at address 100000\n"
- " HEX, size 7d8f HEX (32143 DEC) bytes\n"
- "fpga tftp file addr\n"
- " - transfers `file' from the tftp server into memory at\n"
- " address `addr', then writes the entire file contents\n"
- " into the main FPGA\n"
- "fpga store addr\n"
- " - read configuration data from the main FPGA (the mezz\n"
- " FPGA is write-only), into address `addr'. There must be\n"
- " enough memory available at `addr' to hold all the config\n"
- " data - the size of which is determined by VC:???\n"
- "fpga info\n"
- " - print information about the Hymod FPGA, namely the\n"
- " memory addresses at which the four FPGA local bus\n"
- " address spaces appear in the physical address space"
-);
-/* ------------------------------------------------------------------------- */
-int
-do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
-{
- uchar data[HYMOD_EEPROM_SIZE];
- uint addr = CONFIG_SYS_I2C_EEPROM_ADDR;
-
- switch (argc) {
-
- case 1:
- addr |= HYMOD_EEOFF_MAIN;
- break;
-
- case 2:
- if (strcmp (argv[1], "main") == 0) {
- addr |= HYMOD_EEOFF_MAIN;
- break;
- }
- if (strcmp (argv[1], "mezz") == 0) {
- addr |= HYMOD_EEOFF_MEZZ;
- break;
- }
- /* fall through ... */
-
- default:
- return cmd_usage(cmdtp);
- }
-
- memset (data, 0, HYMOD_EEPROM_SIZE);
-
- eeprom_write (addr, 0, data, HYMOD_EEPROM_SIZE);
-
- return 0;
-}
-U_BOOT_CMD(
- eeclear, 1, 0, do_eecl,
- "Clear the eeprom on a Hymod board",
- "[type]\n"
- " - write zeroes into the EEPROM on the board of type `type'\n"
- " (`type' is either `main' or `mezz' - default `main')\n"
- " Note: the EEPROM write enable jumper must be installed"
-);
-
-/* ------------------------------------------------------------------------- */
-
-int
-do_htest (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-#if 0
- int rc;
-#endif
-#ifdef CONFIG_ETHER_LOOPBACK_TEST
- extern void eth_loopback_test (void);
-#endif /* CONFIG_ETHER_LOOPBACK_TEST */
-
- printf ("HYMOD tests - ensure loopbacks etc. are connected\n\n");
-
-#if 0
- /* Load FPGA with test program */
-
- printf ("Loading test FPGA program ...");
-
- rc = fpga_load (0, test_bitfile, sizeof (test_bitfile));
-
- switch (rc) {
-
- case LOAD_SUCCESS:
- printf (" SUCCEEDED\n");
- break;
-
- case LOAD_FAIL_NOCONF:
- printf (" FAILED (no configuration space defined)\n");
- return 1;
-
- case LOAD_FAIL_NOINIT:
- printf (" FAILED (timeout - no INIT signal seen)\n");
- return 1;
-
- case LOAD_FAIL_NODONE:
- printf (" FAILED (timeout - no DONE signal seen)\n");
- return 1;
-
- default:
- printf (" FAILED (unknown return code from fpga_load\n");
- return 1;
- }
-
- /* run Local Bus <=> Xilinx tests */
-
- /* tell Xilinx to run ZBT Ram, High Speed serial and Mezzanine tests */
-
- /* run SDRAM test */
-#endif
-
-#ifdef CONFIG_ETHER_LOOPBACK_TEST
- /* run Ethernet test */
- eth_loopback_test ();
-#endif /* CONFIG_ETHER_LOOPBACK_TEST */
-
- return 0;
-}
-
-#endif
diff --git a/board/hymod/config.mk b/board/hymod/config.mk
deleted file mode 100644
index 2eeea50..0000000
--- a/board/hymod/config.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-#
-# HYMOD boards
-#
-
-PLATFORM_CPPFLAGS += -I$(srctree)
-
-OBJCOPYFLAGS = --remove-section=.ppcenv
diff --git a/board/hymod/eeprom.c b/board/hymod/eeprom.c
deleted file mode 100644
index ffb0df1..0000000
--- a/board/hymod/eeprom.c
+++ /dev/null
@@ -1,678 +0,0 @@
-/*
- * (C) Copyright 2001
- * Murray Jensen, CSIRO-MIT, <Murray.Jensen at csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc8260.h>
-
-/* imports from fetch.c */
-extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *));
-
-/* imports from input.c */
-extern int hymod_get_serno (const char *);
-
-/* this is relative to the root of the server's tftp directory */
-static char *def_bddb_cfgdir = "/hymod/bddb";
-
-static int
-hymod_eeprom_load (int which, hymod_eeprom_t *ep)
-{
- unsigned dev_addr = CONFIG_SYS_I2C_EEPROM_ADDR | \
- (which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN);
- unsigned offset = 0;
- uchar data[HYMOD_EEPROM_MAXLEN], *dp, *edp;
- hymod_eehdr_t hdr;
- ulong len, crc;
-
- memset (ep, 0, sizeof *ep);
-
- eeprom_read (dev_addr, offset, (uchar *)&hdr, sizeof (hdr));
- offset += sizeof (hdr);
-
- if (hdr.id != HYMOD_EEPROM_ID || hdr.ver > HYMOD_EEPROM_VER ||
- (len = hdr.len) > HYMOD_EEPROM_MAXLEN)
- return (0);
-
- eeprom_read (dev_addr, offset, data, len);
- offset += len;
-
- eeprom_read (dev_addr, offset, (uchar *)&crc, sizeof (ulong));
- offset += sizeof (ulong);
-
- if (crc32 (crc32 (0, (uchar *)&hdr, sizeof hdr), data, len) != crc)
- return (0);
-
- ep->ver = hdr.ver;
- dp = data; edp = dp + len;
-
- for (;;) {
- ulong rtyp;
- uchar rlen, *rdat;
-
- rtyp = *dp++;
- if ((rtyp & 0x80) == 0)
- rlen = *dp++;
- else {
- uchar islarge = rtyp & 0x40;
-
- rtyp = ((rtyp & 0x3f) << 8) | *dp++;
- if (islarge) {
- rtyp = (rtyp << 8) | *dp++;
- rtyp = (rtyp << 8) | *dp++;
- }
-
- rlen = *dp++;
- rlen = (rlen << 8) | *dp++;
- if (islarge) {
- rlen = (rlen << 8) | *dp++;
- rlen = (rlen << 8) | *dp++;
- }
- }
-
- if (rtyp == 0)
- break;
-
- rdat = dp;
- dp += rlen;
-
- if (dp > edp) /* error? */
- break;
-
- switch (rtyp) {
-
- case HYMOD_EEREC_SERNO: /* serial number */
- if (rlen == sizeof (ulong))
- ep->serno = \
- ((ulong)rdat[0] << 24) | \
- ((ulong)rdat[1] << 16) | \
- ((ulong)rdat[2] << 8) | \
- (ulong)rdat[3];
- break;
-
- case HYMOD_EEREC_DATE: /* date */
- if (rlen == sizeof (hymod_date_t)) {
- ep->date.year = ((ushort)rdat[0] << 8) | \
- (ushort)rdat[1];
- ep->date.month = rdat[2];
- ep->date.day = rdat[3];
- }
- break;
-
- case HYMOD_EEREC_BATCH: /* batch */
- if (rlen <= HYMOD_MAX_BATCH)
- memcpy (ep->batch, rdat, ep->batchlen = rlen);
- break;
-
- case HYMOD_EEREC_TYPE: /* board type */
- if (rlen == 1)
- ep->bdtype = *rdat;
- break;
-
- case HYMOD_EEREC_REV: /* board revision */
- if (rlen == 1)
- ep->bdrev = *rdat;
- break;
-
- case HYMOD_EEREC_SDRAM: /* sdram size(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_SDRAM) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->sdramsz[i] = rdat[i];
- ep->nsdram = rlen;
- }
- break;
-
- case HYMOD_EEREC_FLASH: /* flash size(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_FLASH) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->flashsz[i] = rdat[i];
- ep->nflash = rlen;
- }
- break;
-
- case HYMOD_EEREC_ZBT: /* zbt ram size(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_ZBT) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->zbtsz[i] = rdat[i];
- ep->nzbt = rlen;
- }
- break;
-
- case HYMOD_EEREC_XLXTYP: /* xilinx fpga type(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->xlx[i].type = rdat[i];
- ep->nxlx = rlen;
- }
- break;
-
- case HYMOD_EEREC_XLXSPD: /* xilinx fpga speed(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->xlx[i].speed = rdat[i];
- }
- break;
-
- case HYMOD_EEREC_XLXTMP: /* xilinx fpga temperature(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->xlx[i].temp = rdat[i];
- }
- break;
-
- case HYMOD_EEREC_XLXGRD: /* xilinx fpga grade(s) */
- if (rlen > 0 && rlen <= HYMOD_MAX_XLX) {
- int i;
-
- for (i = 0; i < rlen; i++)
- ep->xlx[i].grade = rdat[i];
- }
- break;
-
- case HYMOD_EEREC_CPUTYP: /* CPU type */
- if (rlen == 1)
- ep->mpc.type = *rdat;
- break;
-
- case HYMOD_EEREC_CPUSPD: /* CPU speed */
- if (rlen == 1)
- ep->mpc.cpuspd = *rdat;
- break;
-
- case HYMOD_EEREC_CPMSPD: /* CPM speed */
- if (rlen == 1)
- ep->mpc.cpmspd = *rdat;
- break;
-
- case HYMOD_EEREC_BUSSPD: /* bus speed */
- if (rlen == 1)
- ep->mpc.busspd = *rdat;
- break;
-
- case HYMOD_EEREC_HSTYPE: /* hs-serial chip type */
- if (rlen == 1)
- ep->hss.type = *rdat;
- break;
-
- case HYMOD_EEREC_HSCHIN: /* num hs-serial input chans */
- if (rlen == 1)
- ep->hss.nchin = *rdat;
- break;
-
- case HYMOD_EEREC_HSCHOUT: /* num hs-serial output chans */
- if (rlen == 1)
- ep->hss.nchout = *rdat;
- break;
-
- default: /* ignore */
- break;
- }
- }
-
- return (1);
-}
-
-/* maps an ascii "name=value" into a binary eeprom data record */
-typedef
- struct _eerec_map {
- char *name;
- uint type;
- uchar *(*handler) \
- (struct _eerec_map *, uchar *, uchar *, uchar *);
- uint length;
- uint maxlen;
- }
-eerec_map_t;
-
-static uchar *
-uint_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
-{
- char *eval;
- ulong lval;
-
- lval = simple_strtol ((char *)val, &eval, 10);
-
- if ((uchar *)eval == val || *eval != '\0') {
- printf ("%s rec (%s) is not a valid uint\n", rp->name, val);
- return (NULL);
- }
-
- if (dp + 2 + rp->length > edp) {
- printf ("can't fit %s rec into eeprom\n", rp->name);
- return (NULL);
- }
-
- *dp++ = rp->type;
- *dp++ = rp->length;
-
- switch (rp->length) {
-
- case 1:
- if (lval >= 256) {
- printf ("%s rec value (%lu) out of range (0-255)\n",
- rp->name, lval);
- return (NULL);
- }
- *dp++ = lval;
- break;
-
- case 2:
- if (lval >= 65536) {
- printf ("%s rec value (%lu) out of range (0-65535)\n",
- rp->name, lval);
- return (NULL);
- }
- *dp++ = lval >> 8;
- *dp++ = lval;
- break;
-
- case 4:
- *dp++ = lval >> 24;
- *dp++ = lval >> 16;
- *dp++ = lval >> 8;
- *dp++ = lval;
- break;
-
- default:
- printf ("huh? rp->length not 1, 2 or 4! (%d)\n", rp->length);
- return (NULL);
- }
-
- return (dp);
-}
-
-static uchar *
-date_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
-{
- hymod_date_t date;
- char *p = (char *)val;
- char *ep;
- ulong lval;
-
- lval = simple_strtol (p, &ep, 10);
- if (ep == p || *ep++ != '-') {
-bad_date:
- printf ("%s rec (%s) is not a valid date\n", rp->name, val);
- return (NULL);
- }
- if (lval >= 65536)
- goto bad_date;
- date.year = lval;
-
- lval = simple_strtol (p = ep, &ep, 10);
- if (ep == p || *ep++ != '-' || lval == 0 || lval > 12)
- goto bad_date;
- date.month = lval;
-
- lval = simple_strtol (p = ep, &ep, 10);
- if (ep == p || *ep != '\0' || lval == 0 || lval > 31)
- goto bad_date;
- date.day = lval;
-
- if (dp + 2 + rp->length > edp) {
- printf ("can't fit %s rec into eeprom\n", rp->name);
- return (NULL);
- }
-
- *dp++ = rp->type;
- *dp++ = rp->length;
- *dp++ = date.year >> 8;
- *dp++ = date.year;
- *dp++ = date.month;
- *dp++ = date.day;
-
- return (dp);
-}
-
-static uchar *
-string_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
-{
- uint len;
-
- if ((len = strlen ((char *)val)) > rp->maxlen) {
- printf ("%s rec (%s) string is too long (%d>%d)\n",
- rp->name, val, len, rp->maxlen);
- return (NULL);
- }
-
- if (dp + 2 + len > edp) {
- printf ("can't fit %s rec into eeprom\n", rp->name);
- return (NULL);
- }
-
- *dp++ = rp->type;
- *dp++ = len;
- memcpy (dp, val, len);
- dp += len;
-
- return (dp);
-}
-
-static uchar *
-bytes_handler (eerec_map_t *rp, uchar *val, uchar *dp, uchar *edp)
-{
- uchar bytes[HYMOD_MAX_BYTES], nbytes, *p;
- char *ep;
-
- for (nbytes = 0, p = val; *p != '\0'; p = (uchar *)ep) {
- ulong lval;
-
- lval = simple_strtol ((char *)p, &ep, 10);
- if ((uchar *)ep == p || (*ep != '\0' && *ep != ',') || \
- lval >= 256) {
- printf ("%s rec (%s) byte array has invalid uint\n",
- rp->name, val);
- return (NULL);
- }
- if (nbytes >= HYMOD_MAX_BYTES) {
- printf ("%s rec (%s) byte array too long\n",
- rp->name, val);
- return (NULL);
- }
- bytes[nbytes++] = lval;
-
- if (*ep != '\0')
- ep++;
- }
-
- if (dp + 2 + nbytes > edp) {
- printf ("can't fit %s rec into eeprom\n", rp->name);
- return (NULL);
- }
-
- *dp++ = rp->type;
- *dp++ = nbytes;
- memcpy (dp, bytes, nbytes);
- dp += nbytes;
-
- return (dp);
-}
-
-static eerec_map_t eerec_map[] = {
- /* name type handler len max */
- { "serno", HYMOD_EEREC_SERNO, uint_handler, 4, 0 },
- { "date", HYMOD_EEREC_DATE, date_handler, 4, 0 },
- { "batch", HYMOD_EEREC_BATCH, string_handler, 0, HYMOD_MAX_BATCH },
- { "type", HYMOD_EEREC_TYPE, uint_handler, 1, 0 },
- { "rev", HYMOD_EEREC_REV, uint_handler, 1, 0 },
- { "sdram", HYMOD_EEREC_SDRAM, bytes_handler, 0, HYMOD_MAX_SDRAM },
- { "flash", HYMOD_EEREC_FLASH, bytes_handler, 0, HYMOD_MAX_FLASH },
- { "zbt", HYMOD_EEREC_ZBT, bytes_handler, 0, HYMOD_MAX_ZBT },
- { "xlxtyp", HYMOD_EEREC_XLXTYP, bytes_handler, 0, HYMOD_MAX_XLX },
- { "xlxspd", HYMOD_EEREC_XLXSPD, bytes_handler, 0, HYMOD_MAX_XLX },
- { "xlxtmp", HYMOD_EEREC_XLXTMP, bytes_handler, 0, HYMOD_MAX_XLX },
- { "xlxgrd", HYMOD_EEREC_XLXGRD, bytes_handler, 0, HYMOD_MAX_XLX },
- { "cputyp", HYMOD_EEREC_CPUTYP, uint_handler, 1, 0 },
- { "cpuspd", HYMOD_EEREC_CPUSPD, uint_handler, 1, 0 },
- { "cpmspd", HYMOD_EEREC_CPMSPD, uint_handler, 1, 0 },
- { "busspd", HYMOD_EEREC_BUSSPD, uint_handler, 1, 0 },
- { "hstype", HYMOD_EEREC_HSTYPE, uint_handler, 1, 0 },
- { "hschin", HYMOD_EEREC_HSCHIN, uint_handler, 1, 0 },
- { "hschout", HYMOD_EEREC_HSCHOUT, uint_handler, 1, 0 },
-};
-
-static int neerecs = sizeof eerec_map / sizeof eerec_map[0];
-
-static uchar data[HYMOD_EEPROM_SIZE], *sdp, *dp, *edp;
-
-static int
-eerec_callback (uchar *name, uchar *val)
-{
- eerec_map_t *rp;
-
- for (rp = eerec_map; rp < &eerec_map[neerecs]; rp++)
- if (strcmp ((char *)name, rp->name) == 0)
- break;
-
- if (rp >= &eerec_map[neerecs])
- return (0);
-
- if ((dp = (*rp->handler) (rp, val, dp, edp)) == NULL)
- return (0);
-
- return (1);
-}
-
-static int
-hymod_eeprom_fetch(int which, char *filename, ulong addr)
-{
- unsigned dev_addr = CONFIG_SYS_I2C_EEPROM_ADDR | \
- (which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN);
- hymod_eehdr_t *hp = (hymod_eehdr_t *)&data[0];
- ulong crc;
-
- memset (hp, 0, sizeof *hp);
- hp->id = HYMOD_EEPROM_ID;
- hp->ver = HYMOD_EEPROM_VER;
-
- dp = sdp = (uchar *)(hp + 1);
- edp = dp + HYMOD_EEPROM_MAXLEN;
-
- if (fetch_and_parse (filename, addr, eerec_callback) == 0)
- return (0);
-
- hp->len = dp - sdp;
-
- crc = crc32 (0, data, dp - data);
- memcpy (dp, &crc, sizeof (ulong));
- dp += sizeof (ulong);
-
- eeprom_write (dev_addr, 0, data, dp - data);
-
- return (1);
-}
-
-static char *type_vals[] = {
- "NONE", "IO", "CLP", "DSP", "INPUT", "ALT-INPUT", "DISPLAY"
-};
-
-static char *xlxtyp_vals[] = {
- "NONE", "XCV300E", "XCV400E", "XCV600E"
-};
-
-static char *xlxspd_vals[] = {
- "NONE", "6", "7", "8"
-};
-
-static char *xlxtmp_vals[] = {
- "NONE", "COM", "IND"
-};
-
-static char *xlxgrd_vals[] = {
- "NONE", "NORMAL", "ENGSAMP"
-};
-
-static char *cputyp_vals[] = {
- "NONE", "MPC8260"
-};
-
-static char *clk_vals[] = {
- "NONE", "33", "66", "100", "133", "166", "200"
-};
-
-static char *hstype_vals[] = {
- "NONE", "AMCC-S2064A"
-};
-
-static void
-print_mem (char *l, char *s, uchar n, uchar a[])
-{
- if (n > 0) {
- if (n == 1)
- printf ("%s%dMB %s", s, 1 << (a[0] - 20), l);
- else {
- ulong t = 0;
- int i;
-
- for (i = 0; i < n; i++)
- t += 1 << (a[i] - 20);
-
- printf ("%s%luMB %s (%d banks:", s, t, l, n);
-
- for (i = 0; i < n; i++)
- printf ("%dMB%s",
- 1 << (a[i] - 20),
- (i == n - 1) ? ")" : ",");
- }
- }
- else
- printf ("%sNO %s", s, l);
-}
-
-void
-hymod_eeprom_print (hymod_eeprom_t *ep)
-{
- int i;
-
- printf (" Hymod %s board, rev %03d\n",
- type_vals[ep->bdtype], ep->bdrev);
-
- printf (" serial #: %010lu, date %04d-%02d-%02d",
- ep->serno, ep->date.year, ep->date.month, ep->date.day);
- if (ep->batchlen > 0)
- printf (", batch \"%.*s\"", ep->batchlen, ep->batch);
- puts ("\n");
-
- switch (ep->bdtype) {
-
- case HYMOD_BDTYPE_IO:
- case HYMOD_BDTYPE_CLP:
- case HYMOD_BDTYPE_DSP:
- printf (" Motorola %s CPU, speeds: %s/%s/%s",
- cputyp_vals[ep->mpc.type], clk_vals[ep->mpc.cpuspd],
- clk_vals[ep->mpc.cpmspd], clk_vals[ep->mpc.busspd]);
-
- print_mem ("SDRAM", ", ", ep->nsdram, ep->sdramsz);
-
- print_mem ("FLASH", ", ", ep->nflash, ep->flashsz);
-
- puts ("\n");
-
- print_mem ("ZBT", " ", ep->nzbt, ep->zbtsz);
-
- if (ep->nxlx > 0) {
- hymod_xlx_t *xp;
-
- if (ep->nxlx == 1) {
- xp = &ep->xlx[0];
- printf (", Xilinx %s FPGA (%s/%s/%s)",
- xlxtyp_vals[xp->type],
- xlxspd_vals[xp->speed],
- xlxtmp_vals[xp->temp],
- xlxgrd_vals[xp->grade]);
- }
- else {
- printf (", %d Xilinx FPGAs (", ep->nxlx);
- for (i = 0; i < ep->nxlx; i++) {
- xp = &ep->xlx[i];
- printf ("%s[%s/%s/%s]%s",
- xlxtyp_vals[xp->type],
- xlxspd_vals[xp->speed],
- xlxtmp_vals[xp->temp],
- xlxgrd_vals[xp->grade],
- (i == ep->nxlx - 1) ? ")" : ", ");
- }
- }
- }
- else
- puts(", NO FPGAs");
-
- puts ("\n");
-
- if (ep->hss.type > 0)
- printf (" High Speed Serial: "
- "%s, %d input%s, %d output%s\n",
- hstype_vals[ep->hss.type],
- ep->hss.nchin,
- (ep->hss.nchin == 1 ? "" : "s"),
- ep->hss.nchout,
- (ep->hss.nchout == 1 ? "" : "s"));
- break;
-
- case HYMOD_BDTYPE_INPUT:
- case HYMOD_BDTYPE_ALTINPUT:
- case HYMOD_BDTYPE_DISPLAY:
- break;
-
- default:
- /* crap! */
- printf (" UNKNOWN BOARD TYPE: %d\n", ep->bdtype);
- break;
- }
-}
-
-int
-hymod_eeprom_read (int which, hymod_eeprom_t *ep)
-{
- char *label = which ? "mezzanine" : "main";
- unsigned dev_addr = CONFIG_SYS_I2C_EEPROM_ADDR | \
- (which ? HYMOD_EEOFF_MEZZ : HYMOD_EEOFF_MAIN);
- char filename[50], prompt[50], *dir;
- int serno, count = 0, rc;
-
- rc = eeprom_probe (dev_addr, 0);
-
- if (rc > 0) {
- printf ("*** probe for eeprom failed with code %d\n", rc);
- return (0);
- }
-
- if (rc < 0)
- return (rc);
-
- sprintf (prompt, "Enter %s board serial number: ", label);
-
- if ((dir = getenv ("bddb_cfgdir")) == NULL)
- dir = def_bddb_cfgdir;
-
- for (;;) {
- int rc;
-
- if (hymod_eeprom_load (which, ep))
- return (1);
-
- printf ("*** %s board EEPROM contents are %sinvalid\n",
- label, count == 0 ? "" : "STILL ");
-
- puts ("*** will fetch from server (Ctrl-C to abort)\n");
-
- serno = hymod_get_serno (prompt);
-
- if (serno < 0) {
- if (serno == -1)
- puts ("\n*** interrupted!");
- else
- puts ("\n*** timeout!");
- puts (" - ignoring eeprom contents\n");
- return (0);
- }
-
- sprintf (filename, "%s/%010d.cfg", dir, serno);
-
- printf ("*** fetching %s board EEPROM contents from server\n",
- label);
-
- rc = hymod_eeprom_fetch (which, filename, CONFIG_SYS_LOAD_ADDR);
-
- if (rc == 0) {
- puts ("*** fetch failed - ignoring eeprom contents\n");
- return (0);
- }
-
- count++;
- }
-}
diff --git a/board/hymod/env.c b/board/hymod/env.c
deleted file mode 100644
index 66c5115..0000000
--- a/board/hymod/env.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * (C) Copyright 2003
- * Murray Jensen, CSIRO-MIT, <Murray.Jensen at csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/ctype.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* imports from fetch.c */
-extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *));
-
-/* this is relative to the root of the server's tftp directory */
-static char *def_global_env_path = "/hymod/global_env";
-
-static int
-env_callback (uchar *name, uchar *value)
-{
- hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
- char ov[CONFIG_SYS_CBSIZE], nv[CONFIG_SYS_CBSIZE], *p, *q, *nn, c, *curver, *newver;
- int override = 1, append = 0, remove = 0, nnl, ovl, nvl;
-
- nn = (char *)name;
-
- if (*nn == '-') {
- override = 0;
- nn++;
- }
-
- while (isblank(*nn))
- nn++;
-
- if ((nnl = strlen (nn)) == 0) {
- printf ("Empty name in global env file\n");
- return (0);
- }
-
- if ((c = nn[nnl - 1]) == '+' || c == '-') {
- if (c == '+')
- append = 1;
- else
- remove = 1;
- nn[--nnl] = '\0';
- }
-
- while (nnl > 0 && isblank(nn[nnl - 1]))
- nn[--nnl] = '\0';
- if (nnl == 0) {
- printf ("Empty name in global env file\n");
- return (0);
- }
-
- p = (char *)value;
- q = nv;
-
- while (isblank(*p))
- p++;
-
- nvl = strlen (p);
- while (nvl > 0 && isblank(p[nvl - 1]))
- p[--nvl] = '\0';
-
- while ((*q = *p++) != '\0') {
- if (*q == '%') {
- switch (*p++) {
-
- case '\0': /* whoops - back up */
- p--;
- break;
-
- case '%': /* a single percent character */
- q++;
- break;
-
- case 's': /* main board serial number as string */
- q += sprintf (q, "%010lu",
- cp->main.eeprom.serno);
- break;
-
- case 'S': /* main board serial number as number */
- q += sprintf (q, "%lu", cp->main.eeprom.serno);
- break;
-
- default: /* ignore any others */
- break;
- }
- }
- else
- q++;
- }
-
- if ((nvl = q - nv) == 0) {
- setenv (nn, NULL);
- return (1);
- }
-
- if ((curver = getenv ("global_env_version")) == NULL)
- curver = "unknown";
-
- if ((newver = getenv ("new_genv_version")) == NULL || \
- strcmp (curver, newver) == 0) {
- if (strcmp (nn, "version") == 0)
- setenv ("new_genv_version", nv);
- return (1);
- }
-
- if ((p = getenv (nn)) != NULL) {
-
- strcpy (ov, p);
- ovl = strlen (ov);
-
- if (append) {
-
- if (strstr (ov, nv) == NULL) {
-
- printf ("Appending '%s' to env var '%s'\n",
- nv, nn);
-
- while (nvl >= 0) {
- nv[ovl + 1 + nvl] = nv[nvl];
- nvl--;
- }
-
- nv[ovl] = ' ';
-
- while (--ovl >= 0)
- nv[ovl] = ov[ovl];
-
- setenv (nn, nv);
- }
-
- return (1);
- }
-
- if (remove) {
-
- if (strstr (ov, nv) != NULL) {
-
- printf ("Removing '%s' from env var '%s'\n",
- nv, nn);
-
- while ((p = strstr (ov, nv)) != NULL) {
- q = p + nvl;
- if (*q == ' ')
- q++;
- strcpy(p, q);
- }
-
- setenv (nn, ov);
- }
-
- return (1);
- }
-
- if (!override || strcmp (ov, nv) == 0)
- return (1);
-
- printf ("Re-setting env cmd '%s' from '%s' to '%s'\n",
- nn, ov, nv);
- }
- else
- printf ("Setting env cmd '%s' to '%s'\n", nn, nv);
-
- setenv (nn, nv);
- return (1);
-}
-
-void
-hymod_check_env (void)
-{
- char *p, *path, *curver, *newver;
- int firsttime = 0, needsave = 0;
-
- if (getenv ("global_env_loaded") == NULL) {
- puts ("*** global environment has never been loaded\n");
- puts ("*** fetching from server");
- firsttime = 1;
- }
- else if ((p = getenv ("always_check_env")) != NULL &&
- strcmp (p, "yes") == 0)
- puts ("*** checking for updated global environment");
- else
- return;
-
- puts (" (Control-C to Abort)\n");
-
- if ((path = getenv ("global_env_path")) == NULL || *path == '\0')
- path = def_global_env_path;
-
- if (fetch_and_parse (path, CONFIG_SYS_LOAD_ADDR, env_callback) == 0) {
- puts ("*** Fetch of global environment failed!\n");
- return;
- }
-
- if ((newver = getenv ("new_genv_version")) == NULL) {
- puts ("*** Version number not set - contents ignored!\n");
- return;
- }
-
- if ((curver = getenv ("global_env_version")) == NULL || \
- strcmp (curver, newver) != 0) {
- setenv ("global_env_version", newver);
- needsave = 1;
- }
- else
- printf ("*** Global environment up-to-date (ver %s)\n", curver);
-
- setenv ("new_genv_version", NULL);
-
- if (firsttime) {
- setenv ("global_env_loaded", "yes");
- needsave = 1;
- }
-
- if (needsave)
- puts ("\n*** Remember to run the 'saveenv' "
- "command to save the changes\n\n");
-}
diff --git a/board/hymod/fetch.c b/board/hymod/fetch.c
deleted file mode 100644
index da9373f..0000000
--- a/board/hymod/fetch.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * (C) Copyright 2001
- * Murray Jensen, CSIRO-MIT, <Murray.Jensen at csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <net.h>
-
-/* imports from input.c */
-extern int hymod_get_ethaddr (void);
-
-int
-fetch_and_parse (char *fn, ulong addr, int (*cback)(uchar *, uchar *))
-{
- char *ethaddr;
- uchar *fp, *efp;
- int rc, count = 0;
-
- while ((ethaddr = getenv ("ethaddr")) == NULL || *ethaddr == '\0') {
-
- printf ("*** Ethernet address is%s not set\n",
- count == 0 ? "" : " STILL");
-
- if ((rc = hymod_get_ethaddr ()) < 0) {
- if (rc == -1)
- puts ("\n*** interrupted!");
- else
- puts ("\n*** timeout!");
- printf (" - fetch of '%s' aborted\n", fn);
- return (0);
- }
-
- count++;
- }
-
- copy_filename (BootFile, fn, sizeof (BootFile));
- load_addr = addr;
- NetBootFileXferSize = 0;
-
- if (NetLoop(TFTPGET) == 0) {
- printf ("tftp transfer of file '%s' failed\n", fn);
- return (0);
- }
-
- if (NetBootFileXferSize == 0) {
- printf ("can't determine size of file '%s'\n", fn);
- return (0);
- }
-
- fp = (uchar *)load_addr;
- efp = fp + NetBootFileXferSize;
-
- do {
- uchar *name, *value;
-
- if (*fp == '#' || *fp == '\n') {
- /* skip this line */
- while (fp < efp && *fp++ != '\n')
- ;
- continue;
- }
-
- name = fp;
-
- while (fp < efp && *fp != '=' && *fp != '\n')
- fp++;
- if (fp >= efp)
- break;
- if (*fp == '\n') {
- fp++;
- continue;
- }
- *fp++ = '\0';
-
- value = fp;
-
- while (fp < efp && *fp != '\n')
- fp++;
- if (fp[-1] == '\r')
- fp[-1] = '\0';
- *fp++ = '\0'; /* ok if we go off the end here */
-
- if ((*cback)(name, value) == 0)
- return (0);
-
- } while (fp < efp);
-
- return (1);
-}
diff --git a/board/hymod/flash.c b/board/hymod/flash.c
deleted file mode 100644
index 02e519c..0000000
--- a/board/hymod/flash.c
+++ /dev/null
@@ -1,490 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Hacked for the Hymod board by Murray.Jensen at csiro.au, 20-Oct-00
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <board/hymod/flash.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Protection Flags:
- */
-#define FLAG_PROTECT_SET 0x01
-#define FLAG_PROTECT_CLEAR 0x02
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * probe for flash bank at address "base" and store info about it
- * in the flash_info entry "fip". Fatal error if nothing there.
- */
-static void
-bank_probe (flash_info_t *fip, volatile bank_addr_t base)
-{
- volatile bank_addr_t addr;
- bank_word_t word;
- int i;
-
- /* reset the flash */
- *base = BANK_CMD_RST;
-
- /* put flash into read id mode */
- *base = BANK_CMD_RD_ID;
-
- /* check the manufacturer id - must be intel */
- word = *BANK_REG_MAN_CODE (base);
- if (word != BANK_FILL_WORD (INTEL_MANUFACT&0xff))
- panic ("\nbad manufacturer's code (0x%08lx) at addr 0x%08lx",
- (unsigned long)word, (unsigned long)base);
-
- /* check the device id */
- word = *BANK_REG_DEV_CODE (base);
- switch (word) {
-
- case BANK_FILL_WORD (INTEL_ID_28F320J5&0xff):
- fip->flash_id = FLASH_MAN_INTEL | FLASH_28F320J5;
- fip->sector_count = 32;
- break;
-
- case BANK_FILL_WORD (INTEL_ID_28F640J5&0xff):
- fip->flash_id = FLASH_MAN_INTEL | FLASH_28F640J5;
- fip->sector_count = 64;
- break;
-
- case BANK_FILL_WORD (INTEL_ID_28F320J3A&0xff):
- fip->flash_id = FLASH_MAN_INTEL | FLASH_28F320J3A;
- fip->sector_count = 32;
- break;
-
- case BANK_FILL_WORD (INTEL_ID_28F640J3A&0xff):
- fip->flash_id = FLASH_MAN_INTEL | FLASH_28F640J3A;
- fip->sector_count = 64;
- break;
-
- case BANK_FILL_WORD (INTEL_ID_28F128J3A&0xff):
- fip->flash_id = FLASH_MAN_INTEL | FLASH_28F128J3A;
- fip->sector_count = 128;
- break;
-
- default:
- panic ("\nbad device code (0x%08lx) at addr 0x%08lx",
- (unsigned long)word, (unsigned long)base);
- }
-
- if (fip->sector_count >= CONFIG_SYS_MAX_FLASH_SECT)
- panic ("\ntoo many sectors (%d) in flash at address 0x%08lx",
- fip->sector_count, (unsigned long)base);
-
- addr = base;
- for (i = 0; i < fip->sector_count; i++) {
- fip->start[i] = (unsigned long)addr;
- fip->protect[i] = 0;
- addr = BANK_ADDR_NEXT_BLK (addr);
- }
-
- fip->size = (bank_size_t)addr - (bank_size_t)base;
-
- /* reset the flash */
- *base = BANK_CMD_RST;
-}
-
-static void
-bank_reset (flash_info_t *info, int sect)
-{
- volatile bank_addr_t addr = (bank_addr_t)info->start[sect];
-
-#ifdef FLASH_DEBUG
- printf ("writing reset cmd to addr 0x%08lx\n", (unsigned long)addr);
-#endif
-
- *addr = BANK_CMD_RST;
-}
-
-static void
-bank_erase_init (flash_info_t *info, int sect)
-{
- volatile bank_addr_t addr = (bank_addr_t)info->start[sect];
- int flag;
-
-#ifdef FLASH_DEBUG
- printf ("erasing sector %d, addr = 0x%08lx\n",
- sect, (unsigned long)addr);
-#endif
-
- /* Disable intrs which might cause a timeout here */
- flag = disable_interrupts ();
-
-#ifdef FLASH_DEBUG
- printf ("writing erase cmd to addr 0x%08lx\n", (unsigned long)addr);
-#endif
- *addr = BANK_CMD_ERASE1;
- *addr = BANK_CMD_ERASE2;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-}
-
-static int
-bank_erase_poll (flash_info_t *info, int sect)
-{
- volatile bank_addr_t addr = (bank_addr_t)info->start[sect];
- bank_word_t stat = *addr;
-
-#ifdef FLASH_DEBUG
- printf ("checking status at addr 0x%08lx [0x%08lx]\n",
- (unsigned long)addr, (unsigned long)stat);
-#endif
-
- if ((stat & BANK_STAT_RDY) == BANK_STAT_RDY) {
- if ((stat & BANK_STAT_ERR) != 0) {
- printf ("failed on sector %d [0x%08lx] at "
- "address 0x%08lx\n", sect,
- (unsigned long)stat, (unsigned long)addr);
- *addr = BANK_CMD_CLR_STAT;
- return (-1);
- }
- else
- return (1);
- }
- else
- return (0);
-}
-
-static int
-bank_write_word (volatile bank_addr_t addr, bank_word_t value)
-{
- bank_word_t stat;
- ulong start;
- int flag, retval;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- *addr = BANK_CMD_PROG;
-
- *addr = value;
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- retval = 0;
-
- /* data polling for D7 */
- start = get_timer (0);
- do {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- retval = 1;
- goto done;
- }
- stat = *addr;
- } while ((stat & BANK_STAT_RDY) != BANK_STAT_RDY);
-
- if ((stat & BANK_STAT_ERR) != 0) {
- printf ("flash program failed [0x%08lx] at address 0x%08lx\n",
- (unsigned long)stat, (unsigned long)addr);
- *addr = BANK_CMD_CLR_STAT;
- retval = 3;
- }
-
-done:
- /* reset to read mode */
- *addr = BANK_CMD_RST;
-
- return (retval);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long
-flash_init (void)
-{
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- bank_probe (&flash_info[0], (bank_addr_t)CONFIG_SYS_FLASH_BASE);
-
- /*
- * protect monitor and environment sectors
- */
-
-#if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
- (void)flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- &flash_info[0]);
-#endif
-
-#if defined(CONFIG_SYS_FLASH_ENV_ADDR)
- (void)flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_ENV_ADDR,
-#if defined(CONFIG_SYS_FLASH_ENV_BUF)
- CONFIG_SYS_FLASH_ENV_ADDR + CONFIG_SYS_FLASH_ENV_BUF - 1,
-#else
- CONFIG_SYS_FLASH_ENV_ADDR + CONFIG_SYS_FLASH_ENV_SIZE - 1,
-#endif
- &flash_info[0]);
-#endif
-
- return flash_info[0].size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void
-flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F320J5: printf ("28F320J5 (32 Mbit, 2 x 16bit)\n");
- break;
- case FLASH_28F640J5: printf ("28F640J5 (64 Mbit, 2 x 16bit)\n");
- break;
- case FLASH_28F320J3A: printf ("28F320J3A (32 Mbit, 2 x 16bit)\n");
- break;
- case FLASH_28F640J3A: printf ("28F640J3A (64 Mbit, 2 x 16bit)\n");
- break;
- case FLASH_28F128J3A: printf ("28F320J3A (128 Mbit, 2 x 16bit)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
- );
- }
- printf ("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-/*-----------------------------------------------------------------------
- */
-
-int
-flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- int prot, sect, haderr;
- ulong start, now, last;
- int rcode = 0;
-
-#ifdef FLASH_DEBUG
- printf ("\nflash_erase: erase %d sectors (%d to %d incl.) from\n"
- " Bank # %d: ", s_last - s_first + 1, s_first, s_last,
- (info - flash_info) + 1);
- flash_print_info (info);
-#endif
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sector%s will not be erased\n",
- prot, (prot > 1 ? "s" : ""));
- }
-
- start = get_timer (0);
- last = 0;
- haderr = 0;
-
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- ulong estart;
- int sectdone;
-
- bank_erase_init (info, sect);
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- estart = get_timer (start);
-
- do {
- now = get_timer (start);
-
- if (now - estart > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout (sect %d)\n", sect);
- haderr = 1;
- rcode = 1;
- break;
- }
-
-#ifndef FLASH_DEBUG
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
-#endif
-
- sectdone = bank_erase_poll (info, sect);
-
- if (sectdone < 0) {
- haderr = 1;
- rcode = 1;
- break;
- }
-
- } while (!sectdone);
-
- if (haderr)
- break;
- }
- }
-
- if (haderr > 0)
- printf (" failed\n");
- else
- printf (" done\n");
-
- /* reset to read mode */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- bank_reset (info, sect);
- }
- }
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 3 - Program failed
- */
-static int
-write_word (flash_info_t *info, ulong dest, ulong data)
-{
- /* Check if Flash is (sufficiently) erased */
- if ((*(ulong *)dest & data) != data)
- return (2);
-
- return (bank_write_word ((bank_addr_t)dest, (bank_word_t)data));
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 3 - Program failed
- */
-
-int
-write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/hymod/flash.h b/board/hymod/flash.h
deleted file mode 100644
index 6ea2823..0000000
--- a/board/hymod/flash.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * (C) Copyright 2000
- * Murray Jensen, CSIRO-MIT, <Murray.Jensen at csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*************** DEFINES for Intel StrataFlash FLASH chip ********************/
-
-/* Commands */
-#define ISF_CMD_RST 0xFF /* reset flash */
-#define ISF_CMD_RD_ID 0x90 /* read the id and lock bits */
-#define ISF_CMD_RD_QUERY 0x98 /* read device capabilities */
-#define ISF_CMD_RD_STAT 0x70 /* read the status register */
-#define ISF_CMD_CLR_STAT 0x50 /* clear the staus register */
-#define ISF_CMD_WR_BUF 0xE8 /* clear the staus register */
-#define ISF_CMD_PROG 0x40 /* program word command */
-#define ISF_CMD_ERASE1 0x20 /* 1st word for block erase */
-#define ISF_CMD_ERASE2 0xD0 /* 2nd word for block erase */
-#define ISF_CMD_ERASE_SUSP 0xB0 /* suspend block erase */
-#define ISF_CMD_LOCK 0x60 /* 1st word for all lock cmds */
-#define ISF_CMD_SET_LOCK_BLK 0x01 /* 2nd wrd set block lock bit */
-#define ISF_CMD_SET_LOCK_MSTR 0xF1 /* 2nd wrd set master lck bit */
-#define ISF_CMD_CLR_LOCK_BLK 0xD0 /* 2nd wrd clear blk lck bit */
-
-/* status register bits */
-#define ISF_STAT_DPS 0x02 /* Device Protect Status */
-#define ISF_STAT_VPPS 0x08 /* VPP Status */
-#define ISF_STAT_PSLBS 0x10 /* Program+Set Lock Bit Stat */
-#define ISF_STAT_ECLBS 0x20 /* Erase+Clr Lock Bit Stat */
-#define ISF_STAT_ESS 0x40 /* Erase Suspend Status */
-#define ISF_STAT_RDY 0x80 /* WSM Mach Status, 1=rdy */
-
-#define ISF_STAT_ERR (ISF_STAT_VPPS | ISF_STAT_DPS | \
- ISF_STAT_ECLBS | ISF_STAT_PSLBS)
-
-/* register addresses, valid only following an ISF_CMD_RD_ID command */
-#define ISF_REG_MAN_CODE 0x00 /* manufacturer code */
-#define ISF_REG_DEV_CODE 0x01 /* device code */
-#define ISF_REG_BLK_LCK 0x02 /* block lock configuration */
-#define ISF_REG_MST_LCK 0x03 /* master lock configuration */
-
-/********************** DEFINES for Hymod Flash ******************************/
-
-/*
- * this code requires that the flash on any Hymod board appear as a bank
- * of two (identical) 16bit Intel StrataFlash chips with 64Kword erase
- * sectors (or blocks), running in x16 bit mode and connected side-by-side
- * to make a 32-bit wide bus.
- */
-
-typedef unsigned long bank_word_t;
-typedef bank_word_t bank_blk_t[64 * 1024];
-
-#define BANK_FILL_WORD(b) (((bank_word_t)(b) << 16) | (bank_word_t)(b))
-
-#ifdef EXAMPLE
-
-/* theoretically the following examples should also work */
-
-/* one flash chip in x8 mode with 128Kword sectors and 8bit bus */
-typedef unsigned char bank_word_t;
-typedef bank_word_t bank_blk_t[128 * 1024];
-#define BANK_FILL_WORD(b) ((bank_word_t)(b))
-
-/* four flash chips in x16 mode with 32Kword sectors and 64bit bus */
-typedef unsigned long long bank_word_t;
-typedef bank_word_t bank_blk_t[32 * 1024];
-#define BANK_FILL_WORD(b) ( \
- ((bank_word_t)(b) << 48) \
- ((bank_word_t)(b) << 32) \
- ((bank_word_t)(b) << 16) \
- ((bank_word_t)(b) << 0) \
- )
-
-#endif /* EXAMPLE */
-
-/* the sizes of these two types should probably be the same */
-typedef bank_word_t *bank_addr_t;
-typedef unsigned long bank_size_t;
-
-/* align bank addresses and sizes to bank word boundaries */
-#define BANK_ADDR_WORD_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
- & ~(sizeof (bank_word_t) - 1)))
-#define BANK_SIZE_WORD_ALIGN(s) (((bank_size_t)(s) + sizeof (bank_word_t) - 1) \
- & ~(sizeof (bank_word_t) - 1))
-
-/* align bank addresses and sizes to bank block boundaries */
-#define BANK_ADDR_BLK_ALIGN(a) ((bank_addr_t)((bank_size_t)(a) \
- & ~(sizeof (bank_blk_t) - 1)))
-#define BANK_SIZE_BLK_ALIGN(s) (((bank_size_t)(s) + sizeof (bank_blk_t) - 1) \
- & ~(sizeof (bank_blk_t) - 1))
-
-/* add an offset to a bank address */
-#define BANK_ADDR_OFFSET(a, o) ((bank_addr_t)((bank_size_t)(a) + \
- (bank_size_t)(o)))
-
-/* adjust a bank address to start of next word, block or bank */
-#define BANK_ADDR_NEXT_WORD(a) BANK_ADDR_OFFSET(BANK_ADDR_WORD_ALIGN(a), \
- sizeof (bank_word_t))
-#define BANK_ADDR_NEXT_BLK(a) BANK_ADDR_OFFSET(BANK_ADDR_BLK_ALIGN(a), \
- sizeof (bank_blk_t))
-
-/* get bank address of register r given a bank base address a and block num b */
-#define BANK_ADDR_REG(a, b, r) BANK_ADDR_OFFSET(BANK_ADDR_OFFSET((a), \
- (bank_size_t)(b) * sizeof (bank_blk_t)), \
- (bank_size_t)(r) * sizeof (bank_word_t))
-
-/* make a bank word value for each StrataFlash value */
-
-/* Commands */
-#define BANK_CMD_RST BANK_FILL_WORD(ISF_CMD_RST)
-#define BANK_CMD_RD_ID BANK_FILL_WORD(ISF_CMD_RD_ID)
-#define BANK_CMD_RD_STAT BANK_FILL_WORD(ISF_CMD_RD_STAT)
-#define BANK_CMD_CLR_STAT BANK_FILL_WORD(ISF_CMD_CLR_STAT)
-#define BANK_CMD_ERASE1 BANK_FILL_WORD(ISF_CMD_ERASE1)
-#define BANK_CMD_ERASE2 BANK_FILL_WORD(ISF_CMD_ERASE2)
-#define BANK_CMD_PROG BANK_FILL_WORD(ISF_CMD_PROG)
-#define BANK_CMD_LOCK BANK_FILL_WORD(ISF_CMD_LOCK)
-#define BANK_CMD_SET_LOCK_BLK BANK_FILL_WORD(ISF_CMD_SET_LOCK_BLK)
-#define BANK_CMD_SET_LOCK_MSTR BANK_FILL_WORD(ISF_CMD_SET_LOCK_MSTR)
-#define BANK_CMD_CLR_LOCK_BLK BANK_FILL_WORD(ISF_CMD_CLR_LOCK_BLK)
-
-/* status register bits */
-#define BANK_STAT_DPS BANK_FILL_WORD(ISF_STAT_DPS)
-#define BANK_STAT_PSS BANK_FILL_WORD(ISF_STAT_PSS)
-#define BANK_STAT_VPPS BANK_FILL_WORD(ISF_STAT_VPPS)
-#define BANK_STAT_PSLBS BANK_FILL_WORD(ISF_STAT_PSLBS)
-#define BANK_STAT_ECLBS BANK_FILL_WORD(ISF_STAT_ECLBS)
-#define BANK_STAT_ESS BANK_FILL_WORD(ISF_STAT_ESS)
-#define BANK_STAT_RDY BANK_FILL_WORD(ISF_STAT_RDY)
-
-#define BANK_STAT_ERR BANK_FILL_WORD(ISF_STAT_ERR)
-
-/* make a bank register address for each StrataFlash register address */
-
-#define BANK_REG_MAN_CODE(a) BANK_ADDR_REG((a), 0, ISF_REG_MAN_CODE)
-#define BANK_REG_DEV_CODE(a) BANK_ADDR_REG((a), 0, ISF_REG_DEV_CODE)
-#define BANK_REG_BLK_LCK(a, b) BANK_ADDR_REG((a), (b), ISF_REG_BLK_LCK)
-#define BANK_REG_MST_LCK(a) BANK_ADDR_REG((a), 0, ISF_REG_MST_LCK)
diff --git a/board/hymod/global_env b/board/hymod/global_env
deleted file mode 100644
index ac12fd7..0000000
--- a/board/hymod/global_env
+++ /dev/null
@@ -1,145 +0,0 @@
-# DONT FORGET TO CHANGE THE "version" VAR BELOW IF YOU MAKE CHANGES TO THIS FILE
-
-# (C) Copyright 2001
-# Murray Jensen, CSIRO-MIT, <Murray.Jensen at csiro.au>
-#
-# SPDX-License-Identifier: GPL-2.0+
-
-#
-# global_env
-#
-# file used by Hymod boards to initialise the u-boot non-volatile
-# environment when u-boot is first run (it determines this by the
-# absence of the environment variable "global_env_loaded")
-#
-# format of this file is:
-#
-# 1. blank lines and lines beginning with '#' are ignored
-# 2. all other lines must have the form <name>=<value>
-# 3. if a percent appears anywhere, it is replaced like so:
-#
-# %s serial number of the main board (10 digit zero filled)
-# %S serial number of the main board (plain number)
-# %% a percentage character
-# ... otherwise the %x is discarded
-#
-# if first character in <name> is a dash ('-'), then an existing env var
-# will not be overwritten (the dash is removed). i.e. it is only set if
-# it does not exist
-#
-# if last character in <name> is a plus ('+'), then <value> will be appended
-# to any existing env var (the plus is ignored). Duplicates of <value> are
-# removed.
-#
-# similarly, if the last character in <name> is a minus ('-'), then any
-# occurences of <value> in the current value of <name> will removed (the
-# minus is ignored).
-#
-# leading and trailing whitespace is removed in both <name> and <value>
-# (after processing any initial or final plus/minus in <name>).
-#
-
-# MISCELLANEOUS PARAMETERS
-
-# version must always come first
-version=4
-
-# set the ip address based on the main board serial number
-ipaddr=192.168.1.%S
-serverip=192.168.1.254
-
-# stop auto execute after tftp (not a very good name really)
-autostart=no
-
-# setting this to "yes" forces the global_env file to be loaded and processed
-# if the current version is different to the version in the file
-always_check_env=no
-
-# BOOTING COMMANDS AND PARAMETERS
-
-# command to run when "auto-booting"
-bootcmd=bootm 40080000
-
-# how long the "countdown" to automatically running "bootcmd" is
-bootdelay=2
-
-# how long before it "times out" console input and attempts to run "bootcmd"
-bootretry=5
-
-# arguments passed to the boot program (i.e. linux kernel) via register 6
-# the linux kernel (v2.4) uses the following registers:
-# r3 - address of board information structure
-# r4 - address of initial ramdisk image (0 means no initrd)
-# r5 - size of initial ramdisk image
-# r6 - address of command line string
--bootargs=root=/dev/mtdblock5 rootfstype=squashfs ro
-
-# these four are for hymod linux integrated into our Sun network
-bootargs+=serialno=%S
-bootargs+=nisclient nisdomain=mlb.dmt.csiro.au nissrvadr=138.194.112.4
-bootargs+=nfsclient
-bootargs+=automount
-
-# start a web server by default
-bootargs+=webserver
-
-# give negotiation time to finish
-bootargs+=netsleep=5
-
-# then our ciscos don't pass packets for 25-30 secs after that, so
-# pinging the server until it responds prevents network connections
-# from failing...
-bootargs+=netping
-
-# these are old bootargs - we don't need them anymore
-bootargs-=preload=unix,i2c-cpm,i2c-dev
-bootargs-=ramdisk_size=32768
-bootargs-=ramdisk_size=24576
-
-# FLASH MANIPULATION COMMANDS
-
-#
-# 16M flash, 64 x 256K sectors, mapped at address 0x40000000
-#
-# Sector(s) Address Size Description
-#
-# 0 - 0 0x40000000 256K boot code
-# 1 - 1 0x40040000 256K non volatile environment
-# 2 - 4 0x40080000 768K linux kernel image
-# 5 - 7 0x40140000 768K alternate linux kernel image
-# 8 - 47 0x40200000 10M linux initial ramdisk image
-# 48 - 63 0x40c00000 4M ramdisk image for applications
-#
-
-fetchboot=tftp 100000 /hymod/u-boot.bin
-eraseboot=protect off 1:0 ; erase 1:0 ; protect on 1:0
-copyboot=protect off 1:0 ; cp.b 100000 40000000 40000 ; protect on 1:0
-cmpboot=cmp.b 100000 40000000 40000
-newboot=run fetchboot eraseboot copyboot cmpboot
-
-fetchlinux=tftp 100000 /hymod/linux.bin
-eraselinux=erase 1:2-4
-copylinux=cp.b 100000 40080000 ${filesize}
-cmplinux=cmp.b 100000 40080000 ${filesize}
-newlinux=run fetchlinux eraselinux copylinux cmplinux
-
-fetchaltlinux=tftp 100000 /hymod/altlinux.bin
-erasealtlinux=erase 1:5-7
-copyaltlinux=cp.b 100000 40140000 ${filesize}
-cmpaltlinux=cmp.b 100000 40140000 ${filesize}
-newaltlinux=run fetchaltlinux erasealtlinux copyaltlinux cmpaltlinux
-
-fetchroot=tftp 100000 /hymod/root.bin
-eraseroot=erase 1:8-47
-copyroot=cp.b 100000 40200000 ${filesize}
-cmproot=cmp.b 100000 40200000 ${filesize}
-newroot=run fetchroot eraseroot copyroot cmproot
-
-fetchard=tftp 100000 /hymod/apprd.bin
-eraseard=erase 1:48-63
-copyard=cp.b 100000 40c00000 ${filesize}
-cmpard=cmp.b 100000 40c00000 ${filesize}
-newapprd=run fetchard eraseard copyard cmpard
-
-# pass above map to linux mtd driver
-bootargs+=mtdparts=phys:256k(u-boot),256k(u-boot-env),768k(linux),768k(altlinux),10m(root),4m(hymod)
diff --git a/board/hymod/hymod.c b/board/hymod/hymod.c
deleted file mode 100644
index 0183f78..0000000
--- a/board/hymod/hymod.c
+++ /dev/null
@@ -1,521 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Hacked for the Hymod board by Murray.Jensen at csiro.au, 20-Oct-00
- */
-
-#include <common.h>
-#include <bootretry.h>
-#include <cli.h>
-#include <mpc8260.h>
-#include <mpc8260_irq.h>
-#include <ioports.h>
-#include <i2c.h>
-#include <asm/iopin_8260.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/* imports from eeprom.c */
-extern int hymod_eeprom_read (int, hymod_eeprom_t *);
-extern void hymod_eeprom_print (hymod_eeprom_t *);
-
-/* imports from env.c */
-extern void hymod_check_env (void);
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
- /* Port A configuration */
- {
- /* cnf par sor dir odr dat */
- { 1, 1, 1, 0, 0, 0 }, /* PA31: FCC1 MII COL */
- { 1, 1, 1, 0, 0, 0 }, /* PA30: FCC1 MII CRS */
- { 1, 1, 1, 1, 0, 0 }, /* PA29: FCC1 MII TX_ER */
- { 1, 1, 1, 1, 0, 0 }, /* PA28: FCC1 MII TX_EN */
- { 1, 1, 1, 0, 0, 0 }, /* PA27: FCC1 MII RX_DV */
- { 1, 1, 1, 0, 0, 0 }, /* PA26: FCC1 MII RX_ER */
- { 1, 0, 0, 1, 0, 0 }, /* PA25: FCC2 MII MDIO */
- { 1, 0, 0, 1, 0, 0 }, /* PA24: FCC2 MII MDC */
- { 1, 0, 0, 1, 0, 0 }, /* PA23: FCC3 MII MDIO */
- { 1, 0, 0, 1, 0, 0 }, /* PA22: FCC3 MII MDC */
- { 1, 1, 0, 1, 0, 0 }, /* PA21: FCC1 MII TxD[3] */
- { 1, 1, 0, 1, 0, 0 }, /* PA20: FCC1 MII TxD[2] */
- { 1, 1, 0, 1, 0, 0 }, /* PA19: FCC1 MII TxD[1] */
- { 1, 1, 0, 1, 0, 0 }, /* PA18: FCC1 MII TxD[0] */
- { 1, 1, 0, 0, 0, 0 }, /* PA17: FCC1 MII RxD[3] */
- { 1, 1, 0, 0, 0, 0 }, /* PA16: FCC1 MII RxD[2] */
- { 1, 1, 0, 0, 0, 0 }, /* PA15: FCC1 MII RxD[1] */
- { 1, 1, 0, 0, 0, 0 }, /* PA14: FCC1 MII RxD[0] */
- { 1, 0, 0, 1, 0, 0 }, /* PA13: FCC1 MII MDIO */
- { 1, 0, 0, 1, 0, 0 }, /* PA12: FCC1 MII MDC */
- { 1, 0, 0, 1, 0, 0 }, /* PA11: SEL_CD */
- { 1, 0, 0, 0, 0, 0 }, /* PA10: FLASH STS1 */
- { 1, 0, 0, 0, 0, 0 }, /* PA09: FLASH STS0 */
- { 1, 0, 0, 0, 0, 0 }, /* PA08: FLASH ~PE */
- { 1, 0, 0, 0, 0, 0 }, /* PA07: WATCH ~HRESET */
- { 1, 0, 0, 0, 1, 0 }, /* PA06: VC DONE */
- { 1, 0, 0, 1, 1, 0 }, /* PA05: VC INIT */
- { 1, 0, 0, 1, 0, 0 }, /* PA04: VC ~PROG */
- { 1, 0, 0, 1, 0, 0 }, /* PA03: VM ENABLE */
- { 1, 0, 0, 0, 1, 0 }, /* PA02: VM DONE */
- { 1, 0, 0, 1, 1, 0 }, /* PA01: VM INIT */
- { 1, 0, 0, 1, 0, 0 } /* PA00: VM ~PROG */
- },
-
- /* Port B configuration */
- {
- /* cnf par sor dir odr dat */
- { 1, 1, 0, 1, 0, 0 }, /* PB31: FCC2 MII TX_ER */
- { 1, 1, 0, 0, 0, 0 }, /* PB30: FCC2 MII RX_DV */
- { 1, 1, 1, 1, 0, 0 }, /* PB29: FCC2 MII TX_EN */
- { 1, 1, 0, 0, 0, 0 }, /* PB28: FCC2 MII RX_ER */
- { 1, 1, 0, 0, 0, 0 }, /* PB27: FCC2 MII COL */
- { 1, 1, 0, 0, 0, 0 }, /* PB26: FCC2 MII CRS */
- { 1, 1, 0, 1, 0, 0 }, /* PB25: FCC2 MII TxD[3] */
- { 1, 1, 0, 1, 0, 0 }, /* PB24: FCC2 MII TxD[2] */
- { 1, 1, 0, 1, 0, 0 }, /* PB23: FCC2 MII TxD[1] */
- { 1, 1, 0, 1, 0, 0 }, /* PB22: FCC2 MII TxD[0] */
- { 1, 1, 0, 0, 0, 0 }, /* PB21: FCC2 MII RxD[0] */
- { 1, 1, 0, 0, 0, 0 }, /* PB20: FCC2 MII RxD[1] */
- { 1, 1, 0, 0, 0, 0 }, /* PB19: FCC2 MII RxD[2] */
- { 1, 1, 0, 0, 0, 0 }, /* PB18: FCC2 MII RxD[3] */
- { 1, 1, 0, 0, 0, 0 }, /* PB17: FCC3 MII RX_DV */
- { 1, 1, 0, 0, 0, 0 }, /* PB16: FCC3 MII RX_ER */
- { 1, 1, 0, 1, 0, 0 }, /* PB15: FCC3 MII TX_ER */
- { 1, 1, 0, 1, 0, 0 }, /* PB14: FCC3 MII TX_EN */
- { 1, 1, 0, 0, 0, 0 }, /* PB13: FCC3 MII COL */
- { 1, 1, 0, 0, 0, 0 }, /* PB12: FCC3 MII CRS */
- { 1, 1, 0, 0, 0, 0 }, /* PB11: FCC3 MII RxD[3] */
- { 1, 1, 0, 0, 0, 0 }, /* PB10: FCC3 MII RxD[2] */
- { 1, 1, 0, 0, 0, 0 }, /* PB09: FCC3 MII RxD[1] */
- { 1, 1, 0, 0, 0, 0 }, /* PB08: FCC3 MII RxD[0] */
- { 1, 1, 0, 1, 0, 0 }, /* PB07: FCC3 MII TxD[3] */
- { 1, 1, 0, 1, 0, 0 }, /* PB06: FCC3 MII TxD[2] */
- { 1, 1, 0, 1, 0, 0 }, /* PB05: FCC3 MII TxD[1] */
- { 1, 1, 0, 1, 0, 0 }, /* PB04: FCC3 MII TxD[0] */
- { 0, 0, 0, 0, 0, 0 }, /* PB03: pin doesn't exist */
- { 0, 0, 0, 0, 0, 0 }, /* PB02: pin doesn't exist */
- { 0, 0, 0, 0, 0, 0 }, /* PB01: pin doesn't exist */
- { 0, 0, 0, 0, 0, 0 } /* PB00: pin doesn't exist */
- },
-
- /* Port C configuration */
- {
- /* cnf par sor dir odr dat */
- { 1, 0, 0, 0, 0, 0 }, /* PC31: MEZ ~IACK */
- { 0, 0, 0, 0, 0, 0 }, /* PC30: ? */
- { 1, 1, 0, 0, 0, 0 }, /* PC29: CLK SCCx */
- { 1, 1, 0, 0, 0, 0 }, /* PC28: CLK4 */
- { 1, 1, 0, 0, 0, 0 }, /* PC27: CLK SCCF */
- { 1, 1, 0, 0, 0, 0 }, /* PC26: CLK 32K */
- { 1, 1, 0, 0, 0, 0 }, /* PC25: BRG4/CLK7 */
- { 0, 0, 0, 0, 0, 0 }, /* PC24: ? */
- { 1, 1, 0, 0, 0, 0 }, /* PC23: CLK SCCx */
- { 1, 1, 0, 0, 0, 0 }, /* PC22: FCC1 MII RX_CLK */
- { 1, 1, 0, 0, 0, 0 }, /* PC21: FCC1 MII TX_CLK */
- { 1, 1, 0, 0, 0, 0 }, /* PC20: CLK SCCF */
- { 1, 1, 0, 0, 0, 0 }, /* PC19: FCC2 MII RX_CLK */
- { 1, 1, 0, 0, 0, 0 }, /* PC18: FCC2 MII TX_CLK */
- { 1, 1, 0, 0, 0, 0 }, /* PC17: FCC3 MII RX_CLK */
- { 1, 1, 0, 0, 0, 0 }, /* PC16: FCC3 MII TX_CLK */
- { 1, 0, 0, 0, 0, 0 }, /* PC15: SCC1 UART ~CTS */
- { 1, 0, 0, 0, 0, 0 }, /* PC14: SCC1 UART ~CD */
- { 1, 0, 0, 0, 0, 0 }, /* PC13: SCC2 UART ~CTS */
- { 1, 0, 0, 0, 0, 0 }, /* PC12: SCC2 UART ~CD */
- { 1, 0, 0, 1, 0, 0 }, /* PC11: SCC1 UART ~DTR */
- { 1, 0, 0, 1, 0, 0 }, /* PC10: SCC1 UART ~DSR */
- { 1, 0, 0, 1, 0, 0 }, /* PC09: SCC2 UART ~DTR */
- { 1, 0, 0, 1, 0, 0 }, /* PC08: SCC2 UART ~DSR */
- { 1, 0, 0, 0, 0, 0 }, /* PC07: TEMP ~ALERT */
- { 1, 0, 0, 0, 0, 0 }, /* PC06: FCC3 INT */
- { 1, 0, 0, 0, 0, 0 }, /* PC05: FCC2 INT */
- { 1, 0, 0, 0, 0, 0 }, /* PC04: FCC1 INT */
- { 0, 1, 1, 1, 0, 0 }, /* PC03: SDMA IDMA2 ~DACK */
- { 0, 1, 1, 0, 0, 0 }, /* PC02: SDMA IDMA2 ~DONE */
- { 0, 1, 0, 0, 0, 0 }, /* PC01: SDMA IDMA2 ~DREQ */
- { 1, 1, 0, 1, 0, 0 } /* PC00: BRG7 */
- },
-
- /* Port D configuration */
- {
- /* cnf par sor dir odr dat */
- { 1, 1, 0, 0, 0, 0 }, /* PD31: SCC1 UART RxD */
- { 1, 1, 1, 1, 0, 0 }, /* PD30: SCC1 UART TxD */
- { 1, 0, 0, 1, 0, 0 }, /* PD29: SCC1 UART ~RTS */
- { 1, 1, 0, 0, 0, 0 }, /* PD28: SCC2 UART RxD */
- { 1, 1, 0, 1, 0, 0 }, /* PD27: SCC2 UART TxD */
- { 1, 0, 0, 1, 0, 0 }, /* PD26: SCC2 UART ~RTS */
- { 1, 0, 0, 0, 0, 0 }, /* PD25: SCC1 UART ~RI */
- { 1, 0, 0, 0, 0, 0 }, /* PD24: SCC2 UART ~RI */
- { 1, 0, 0, 1, 0, 0 }, /* PD23: CLKGEN PD */
- { 1, 0, 0, 0, 0, 0 }, /* PD22: USER3 */
- { 1, 0, 0, 0, 0, 0 }, /* PD21: USER2 */
- { 1, 0, 0, 0, 0, 0 }, /* PD20: USER1 */
- { 1, 1, 1, 0, 0, 0 }, /* PD19: SPI ~SEL */
- { 1, 1, 1, 0, 0, 0 }, /* PD18: SPI CLK */
- { 1, 1, 1, 0, 0, 0 }, /* PD17: SPI MOSI */
- { 1, 1, 1, 0, 0, 0 }, /* PD16: SPI MISO */
- { 1, 1, 1, 0, 1, 0 }, /* PD15: I2C SDA */
- { 1, 1, 1, 0, 1, 0 }, /* PD14: I2C SCL */
- { 1, 0, 0, 1, 0, 1 }, /* PD13: TEMP ~STDBY */
- { 1, 0, 0, 1, 0, 1 }, /* PD12: FCC3 ~RESET */
- { 1, 0, 0, 1, 0, 1 }, /* PD11: FCC2 ~RESET */
- { 1, 0, 0, 1, 0, 1 }, /* PD10: FCC1 ~RESET */
- { 1, 0, 0, 0, 0, 0 }, /* PD09: PD9 */
- { 1, 0, 0, 0, 0, 0 }, /* PD08: PD8 */
- { 1, 0, 0, 1, 0, 1 }, /* PD07: PD7 */
- { 1, 0, 0, 1, 0, 1 }, /* PD06: PD6 */
- { 1, 0, 0, 1, 0, 1 }, /* PD05: PD5 */
- { 1, 0, 0, 1, 0, 1 }, /* PD04: PD4 */
- { 0, 0, 0, 0, 0, 0 }, /* PD03: pin doesn't exist */
- { 0, 0, 0, 0, 0, 0 }, /* PD02: pin doesn't exist */
- { 0, 0, 0, 0, 0, 0 }, /* PD01: pin doesn't exist */
- { 0, 0, 0, 0, 0, 0 } /* PD00: pin doesn't exist */
- }
-};
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * AMI FS6377 Clock Generator configuration table
- *
- * the "fs6377_regs[]" table entries correspond to FS6377 registers
- * 0 - 15 (total of 16 bytes).
- *
- * the data is written to the FS6377 via the i2c bus using address in
- * "fs6377_addr" (address is 7 bits - R/W bit not included).
- *
- * The fs6377 has four clock outputs: A, B, C and D.
- *
- * Outputs C and D can each provide two different clock outputs C1/D1 or
- * C2/D2 depending on the state of the SEL_CD input which is connected to
- * the MPC8260 I/O port pin PA11. PA11 output (SEL_CD input) low (or 0)
- * selects C1/D1 and PA11 output (SEL_CD input) high (or 1) selects C2/D2.
- *
- * PA11 defaults to output low (or 0) in the i/o port config table above.
- *
- * Output A provides a 100MHz for the High Speed Serial chips. Output B
- * provides a 3.6864MHz clock for more accurate asynchronous serial bit
- * rates. Output C is routed to the mezzanine connector but is currently
- * unused - both C1 and C2 are set to 16MHz. Output D is used by both the
- * alt-input and display mezzanine boards for their video chips. The
- * alt-input board requires a clock of 24.576MHz and this is available on
- * D1 (PA11=SEL_CD=0). The display board requires a clock of 27MHz and this
- * is available on D2 (PA11=SEL_CD=1).
- *
- * So the default is a clock suitable for the alt-input board. PA11 is toggled
- * later in misc_init_r(), if a display board is detected.
- */
-
-uchar fs6377_addr = 0x5c;
-
-uchar fs6377_regs[16] = {
- 12, 75, 64, 25, 144, 128, 25, 192,
- 0, 16, 135, 192, 224, 64, 64, 192
-};
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * special board initialisation, after clocks and timebase have been
- * set up but before environment and serial are initialised.
- *
- * added so that very early initialisations can be done using the i2c
- * driver (which requires the clocks, to calculate the dividers, and
- * the timebase, for udelay())
- */
-
-int
-board_postclk_init (void)
-{
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- /*
- * Initialise the FS6377 clock chip
- *
- * the secondary address is the register number from where to
- * start the write - I want to write all the registers
- *
- * don't bother checking return status - we have no console yet
- * to print it on, nor any RAM to store it in - it will be obvious
- * if this doesn't work
- */
- (void) i2c_write (fs6377_addr, 0, 1, fs6377_regs,
- sizeof (fs6377_regs));
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity: Hardwired to HYMOD
- */
-
-int
-checkboard (void)
-{
- puts ("Board: HYMOD\n");
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * miscellaneous (early - while running in flash) initialisations.
- */
-
-#define _NOT_USED_ 0xFFFFFFFF
-
-uint upmb_table[] = {
- /* Read Single Beat (RSS) - offset 0x00 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Read Burst (RBS) - offset 0x08 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Write Single Beat (WSS) - offset 0x18 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Write Burst (WSS) - offset 0x20 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Refresh Timer (PTS) - offset 0x30 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Exception Condition (EXS) - offset 0x3c */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
-};
-
-uint upmc_table[] = {
- /* Read Single Beat (RSS) - offset 0x00 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Read Burst (RBS) - offset 0x08 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Write Single Beat (WSS) - offset 0x18 */
- 0xF0E00000, 0xF0A00000, 0x00A00000, 0x30A00000,
- 0xF0F40007, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Write Burst (WSS) - offset 0x20 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Refresh Timer (PTS) - offset 0x30 */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
- /* Exception Condition (EXS) - offset 0x3c */
- _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
-};
-
-int
-misc_init_f (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
-
- printf ("UPMs: ");
-
- upmconfig (UPMB, upmb_table, sizeof upmb_table / sizeof upmb_table[0]);
- memctl->memc_mbmr = CONFIG_SYS_MBMR;
-
- upmconfig (UPMC, upmc_table, sizeof upmc_table / sizeof upmc_table[0]);
- memctl->memc_mcmr = CONFIG_SYS_MCMR;
-
- printf ("configured\n");
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t
-initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
- volatile uchar c = 0, *ramaddr = (uchar *) (CONFIG_SYS_SDRAM_BASE + 0x8);
- ulong psdmr = CONFIG_SYS_PSDMR;
- int i;
-
- /*
- * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
- *
- * "At system reset, initialization software must set up the
- * programmable parameters in the memory controller banks registers
- * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
- * system software should execute the following initialization sequence
- * for each SDRAM device.
- *
- * 1. Issue a PRECHARGE-ALL-BANKS command
- * 2. Issue eight CBR REFRESH commands
- * 3. Issue a MODE-SET command to initialize the mode register
- *
- * The initial commands are executed by setting P/LSDMR[OP] and
- * accessing the SDRAM with a single-byte transaction."
- *
- * The appropriate BRx/ORx registers have already been set when we
- * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
- */
-
- memctl->memc_psrt = CONFIG_SYS_PSRT;
- memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
- for (i = 0; i < 8; i++)
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
- *ramaddr = c;
-
- memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
- *ramaddr = c;
-
- return (CONFIG_SYS_SDRAM_SIZE << 20);
-}
-
-/* ------------------------------------------------------------------------- */
-/* miscellaneous initialisations after relocation into ram (misc_init_r) */
-/* */
-/* loads the data in the main board and mezzanine board eeproms into */
-/* the hymod configuration struct stored in the board information area. */
-/* */
-/* if the contents of either eeprom is invalid, prompts for a serial */
-/* number (and an ethernet address if required) then fetches a file */
-/* containing information to be stored in the eeprom from the tftp server */
-/* (the file name is based on the serial number and a built-in path) */
-
-int
-last_stage_init (void)
-{
- hymod_conf_t *cp = &gd->bd->bi_hymod_conf;
- int rc;
-
- /*
- * we use the cli_readline() function, but we also want
- * command timeout enabled
- */
- bootretry_init_cmd_timeout();
-
- memset ((void *) cp, 0, sizeof (*cp));
-
- /* set up main board config info */
-
- rc = hymod_eeprom_read (0, &cp->main.eeprom);
-
- puts ("EEPROM:main...");
- if (rc < 0)
- puts ("NOT PRESENT\n");
- else if (rc == 0)
- puts ("INVALID\n");
- else {
- cp->main.eeprom.valid = 1;
-
- printf ("OK (ver %u)\n", cp->main.eeprom.ver);
- hymod_eeprom_print (&cp->main.eeprom);
-
- /*
- * hard-wired assumption here: all hymod main boards will have
- * one xilinx fpga, with the interrupt line connected to IRQ2
- *
- * One day, this might be based on the board type
- */
-
- cp->main.xlx[0].mmap.prog.exists = 1;
- cp->main.xlx[0].mmap.prog.size = FPGA_MAIN_CFG_SIZE;
- cp->main.xlx[0].mmap.prog.base = FPGA_MAIN_CFG_BASE;
-
- cp->main.xlx[0].mmap.reg.exists = 1;
- cp->main.xlx[0].mmap.reg.size = FPGA_MAIN_REG_SIZE;
- cp->main.xlx[0].mmap.reg.base = FPGA_MAIN_REG_BASE;
-
- cp->main.xlx[0].mmap.port.exists = 1;
- cp->main.xlx[0].mmap.port.size = FPGA_MAIN_PORT_SIZE;
- cp->main.xlx[0].mmap.port.base = FPGA_MAIN_PORT_BASE;
-
- cp->main.xlx[0].iopins.prog_pin.port = FPGA_MAIN_PROG_PORT;
- cp->main.xlx[0].iopins.prog_pin.pin = FPGA_MAIN_PROG_PIN;
- cp->main.xlx[0].iopins.prog_pin.flag = 1;
- cp->main.xlx[0].iopins.init_pin.port = FPGA_MAIN_INIT_PORT;
- cp->main.xlx[0].iopins.init_pin.pin = FPGA_MAIN_INIT_PIN;
- cp->main.xlx[0].iopins.init_pin.flag = 1;
- cp->main.xlx[0].iopins.done_pin.port = FPGA_MAIN_DONE_PORT;
- cp->main.xlx[0].iopins.done_pin.pin = FPGA_MAIN_DONE_PIN;
- cp->main.xlx[0].iopins.done_pin.flag = 1;
-#ifdef FPGA_MAIN_ENABLE_PORT
- cp->main.xlx[0].iopins.enable_pin.port = FPGA_MAIN_ENABLE_PORT;
- cp->main.xlx[0].iopins.enable_pin.pin = FPGA_MAIN_ENABLE_PIN;
- cp->main.xlx[0].iopins.enable_pin.flag = 1;
-#endif
-
- cp->main.xlx[0].irq = FPGA_MAIN_IRQ;
- }
-
- /* set up mezzanine board config info */
-
- rc = hymod_eeprom_read (1, &cp->mezz.eeprom);
-
- puts ("EEPROM:mezz...");
- if (rc < 0)
- puts ("NOT PRESENT\n");
- else if (rc == 0)
- puts ("INVALID\n");
- else {
- cp->main.eeprom.valid = 1;
-
- printf ("OK (ver %u)\n", cp->mezz.eeprom.ver);
- hymod_eeprom_print (&cp->mezz.eeprom);
- }
-
- cp->crc = crc32 (0, (unsigned char *)cp, offsetof (hymod_conf_t, crc));
-
- hymod_check_env ();
-
- return (0);
-}
-
-#ifdef CONFIG_SHOW_ACTIVITY
-void board_show_activity (ulong timebase)
-{
-#ifdef CONFIG_SYS_HYMOD_DBLEDS
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile iop8260_t *iop = &immr->im_ioport;
- static int shift = 0;
-
- if ((timestamp % CONFIG_SYS_HZ) == 0) {
- if (++shift > 3)
- shift = 0;
- iop->iop_pdatd =
- (iop->iop_pdatd & ~0x0f000000) | (1 << (24 + shift));
- }
-#endif /* CONFIG_SYS_HYMOD_DBLEDS */
-}
-
-void show_activity(int arg)
-{
-}
-#endif /* CONFIG_SHOW_ACTIVITY */
diff --git a/board/hymod/hymod.h b/board/hymod/hymod.h
deleted file mode 100644
index 7024d8a..0000000
--- a/board/hymod/hymod.h
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * (C) Copyright 2001
- * Murray Jensen, CSIRO-MIT, <Murray.Jensen at csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef _HYMOD_H_
-#define _HYMOD_H_
-
-#ifdef CONFIG_MPC8260
-#include <asm/iopin_8260.h>
-#endif
-
-/*
- * hymod configuration data - passed by boot code via the board information
- * structure (only U-Boot has support for this at the moment)
- *
- * there are three types of data passed up from the boot monitor. the first
- * (type hymod_eeprom_t) is the eeprom data that was read off both the main
- * (or mother) board and the mezzanine board (if any). this data defines how
- * many Xilinx fpgas are on each board, and their types (among other things).
- * the second type of data (type xlx_mmap_t, one per Xilinx fpga) defines where
- * in the physical address space the various Xilinx fpga access regions have
- * been mapped by the boot rom. the third type of data (type xlx_iopins_t,
- * one per Xilinx fpga) defines which io port pins are connected to the various
- * signals required to program a Xilinx fpga.
- *
- * A ram/flash "bank" refers to memory controlled by the same chip select.
- *
- * the eeprom contents are defined as in technical note #2 - basically,
- * a header, zero or more records in no particular order, and a 32 bit crc
- * a record is 1 or more type bytes, a length byte and "length" bytes.
- */
-
-#define HYMOD_EEPROM_ID 0xAA /* eeprom id byte */
-#define HYMOD_EEPROM_VER 1 /* eeprom contents version (0-127) */
-#define HYMOD_EEPROM_SIZE 256 /* number of bytes in the eeprom */
-
-/* eeprom header */
-typedef
- struct {
- unsigned char id; /* eeprom id byte */
- unsigned char :1;
- unsigned char ver:7; /* eeprom contents version number */
- unsigned long len; /* total # of bytes btw hdr and crc */
- }
-hymod_eehdr_t;
-
-/* maximum number of bytes available for eeprom data records */
-#define HYMOD_EEPROM_MAXLEN (HYMOD_EEPROM_SIZE \
- - sizeof (hymod_eehdr_t) \
- - sizeof (unsigned long))
-
-/* eeprom data record */
-typedef
- union {
- struct {
- unsigned char topbit:1;
- unsigned char type:7;
- unsigned char len;
- unsigned char data[1]; /* variable length */
- } small;
- struct {
- unsigned short topbit:1;
- unsigned short nxtbit:1;
- unsigned short type:14;
- unsigned short len;
- unsigned char data[1]; /* variable length */
- } medium;
- struct {
- unsigned long topbit:1;
- unsigned long nxtbit:1;
- unsigned long type:30;
- unsigned long len;
- unsigned char data[1]; /* variable length */
- } large;
- }
-hymod_eerec_t;
-
-#define HYMOD_EEOFF_MAIN 0x00 /* i2c addr offset for main eeprom */
-#define HYMOD_EEOFF_MEZZ 0x04 /* i2c addr offset for mezz eepomr */
-
-/* eeprom record types */
-#define HYMOD_EEREC_SERNO 1 /* serial number */
-#define HYMOD_EEREC_DATE 2 /* date */
-#define HYMOD_EEREC_BATCH 3 /* batch id */
-#define HYMOD_EEREC_TYPE 4 /* board type */
-#define HYMOD_EEREC_REV 5 /* revision number */
-#define HYMOD_EEREC_SDRAM 6 /* sdram sizes */
-#define HYMOD_EEREC_FLASH 7 /* flash sizes */
-#define HYMOD_EEREC_ZBT 8 /* zbt ram sizes */
-#define HYMOD_EEREC_XLXTYP 9 /* Xilinx fpga types */
-#define HYMOD_EEREC_XLXSPD 10 /* Xilinx fpga speeds */
-#define HYMOD_EEREC_XLXTMP 11 /* Xilinx fpga temperatures */
-#define HYMOD_EEREC_XLXGRD 12 /* Xilinx fpga grades */
-#define HYMOD_EEREC_CPUTYP 13 /* Motorola CPU type */
-#define HYMOD_EEREC_CPUSPD 14 /* CPU speed */
-#define HYMOD_EEREC_BUSSPD 15 /* bus speed */
-#define HYMOD_EEREC_CPMSPD 16 /* CPM speed */
-#define HYMOD_EEREC_HSTYPE 17 /* high-speed serial chip type */
-#define HYMOD_EEREC_HSCHIN 18 /* high-speed serial input channels */
-#define HYMOD_EEREC_HSCHOUT 19 /* high-speed serial output channels */
-
-/* some dimensions */
-#define HYMOD_MAX_BATCH 32 /* max no. of bytes in batch id */
-#define HYMOD_MAX_SDRAM 4 /* max sdram "banks" on any board */
-#define HYMOD_MAX_FLASH 4 /* max flash "banks" on any board */
-#define HYMOD_MAX_ZBT 16 /* max ZBT rams on any board */
-#define HYMOD_MAX_XLX 4 /* max Xilinx fpgas on any board */
-
-#define HYMOD_MAX_BYTES 16 /* enough to store any bytes array */
-
-/* board types */
-#define HYMOD_BDTYPE_NONE 0 /* information not present */
-#define HYMOD_BDTYPE_IO 1 /* I/O main board */
-#define HYMOD_BDTYPE_CLP 2 /* CLP main board */
-#define HYMOD_BDTYPE_DSP 3 /* DSP main board */
-#define HYMOD_BDTYPE_INPUT 4 /* video input mezzanine board */
-#define HYMOD_BDTYPE_ALTINPUT 5 /* video input mezzanine board */
-#define HYMOD_BDTYPE_DISPLAY 6 /* video display mezzanine board */
-#define HYMOD_BDTYPE_MAX 7 /* first invalid value */
-
-/* Xilinx fpga types */
-#define HYMOD_XTYP_NONE 0 /* information not present */
-#define HYMOD_XTYP_XCV300E 1 /* Xilinx Virtex 300 */
-#define HYMOD_XTYP_XCV400E 2 /* Xilinx Virtex 400 */
-#define HYMOD_XTYP_XCV600E 3 /* Xilinx Virtex 600 */
-#define HYMOD_XTYP_MAX 4 /* first invalid value */
-
-/* Xilinx fpga speeds */
-#define HYMOD_XSPD_NONE 0 /* information not present */
-#define HYMOD_XSPD_SIX 1
-#define HYMOD_XSPD_SEVEN 2
-#define HYMOD_XSPD_EIGHT 3
-#define HYMOD_XSPD_MAX 4 /* first invalid value */
-
-/* Xilinx fpga temperatures */
-#define HYMOD_XTMP_NONE 0 /* information not present */
-#define HYMOD_XTMP_COM 1
-#define HYMOD_XTMP_IND 2
-#define HYMOD_XTMP_MAX 3 /* first invalid value */
-
-/* Xilinx fpga grades */
-#define HYMOD_XTMP_NONE 0 /* information not present */
-#define HYMOD_XTMP_NORMAL 1
-#define HYMOD_XTMP_ENGSAMP 2
-#define HYMOD_XTMP_MAX 3 /* first invalid value */
-
-/* CPU types */
-#define HYMOD_CPUTYPE_NONE 0 /* information not present */
-#define HYMOD_CPUTYPE_MPC8260 1 /* Motorola MPC8260 embedded powerpc */
-#define HYMOD_CPUTYPE_MAX 2 /* first invalid value */
-
-/* CPU/BUS/CPM clock speeds */
-#define HYMOD_CLKSPD_NONE 0 /* information not present */
-#define HYMOD_CLKSPD_33MHZ 1
-#define HYMOD_CLKSPD_66MHZ 2
-#define HYMOD_CLKSPD_100MHZ 3
-#define HYMOD_CLKSPD_133MHZ 4
-#define HYMOD_CLKSPD_166MHZ 5
-#define HYMOD_CLKSPD_200MHZ 6
-#define HYMOD_CLKSPD_MAX 7 /* first invalid value */
-
-/* high speed serial chip types */
-#define HYMOD_HSSTYPE_NONE 0 /* information not present */
-#define HYMOD_HSSTYPE_AMCC52064 1
-#define HYMOD_HSSTYPE_MAX 2 /* first invalid value */
-
-/* a date (yyyy-mm-dd) */
-typedef
- struct {
- unsigned short year;
- unsigned char month;
- unsigned char day;
- }
-hymod_date_t;
-
-/* describes a Xilinx fpga */
-typedef
- struct {
- unsigned char type; /* chip type */
- unsigned char speed; /* chip speed rating */
- unsigned char temp; /* chip temperature rating */
- unsigned char grade; /* chip grade */
- }
-hymod_xlx_t;
-
-/* describes a Motorola embedded processor */
-typedef
- struct {
- unsigned char type; /* CPU type */
- unsigned char cpuspd; /* speed of the PowerPC core */
- unsigned char busspd; /* speed of the system and 60x bus */
- unsigned char cpmspd; /* speed of the CPM co-processor */
- }
-hymod_mpc_t;
-
-/* info about high-speed (1Gbit) serial interface */
-typedef
- struct {
- unsigned char type; /* high-speed serial chip type */
- unsigned char nchin; /* number of input channels mounted */
- unsigned char nchout; /* number of output channels mounted */
- }
-hymod_hss_t;
-
-/*
- * this defines the contents of the serial eeprom that exists on every
- * hymod board, including mezzanine boards (the serial eeprom will be
- * faked for early development boards that don't have one)
- */
-
-typedef
- struct {
- unsigned char valid:1; /* contents of this struct is valid */
- unsigned char ver:7; /* eeprom contents version */
- unsigned char bdtype; /* board type */
- unsigned char bdrev; /* board revision */
- unsigned char batchlen; /* length of batch string below */
- unsigned long serno; /* serial number */
- hymod_date_t date; /* manufacture date */
- unsigned char batch[32]; /* manufacturer specific batch id */
- unsigned char nsdram; /* # of ram "banks" */
- unsigned char nflash; /* # of flash "banks" */
- unsigned char nzbt; /* # of ZBT rams */
- unsigned char nxlx; /* # of Xilinx fpgas */
- unsigned char sdramsz[HYMOD_MAX_SDRAM]; /* log2 of sdram size */
- unsigned char flashsz[HYMOD_MAX_FLASH]; /* log2 of flash size */
- unsigned char zbtsz[HYMOD_MAX_ZBT]; /* log2 of ZBT ram size */
- hymod_xlx_t xlx[HYMOD_MAX_XLX]; /* Xilinx fpga info */
- hymod_mpc_t mpc; /* Motorola MPC CPU info */
- hymod_hss_t hss; /* high-speed serial info */
- }
-hymod_eeprom_t;
-
-/*
- * this defines a region in the processor's physical address space
- */
-typedef
- struct {
- unsigned long exists:1; /* 1 if the region exists, 0 if not */
- unsigned long size:31; /* size in bytes */
- unsigned long base; /* base address */
- }
-xlx_prgn_t;
-
-/*
- * this defines where the various Xilinx fpga access regions are mapped
- * into the physical address space of the processor
- */
-typedef
- struct {
- xlx_prgn_t prog; /* program access region */
- xlx_prgn_t reg; /* register access region */
- xlx_prgn_t port; /* port access region */
- }
-xlx_mmap_t;
-
-/*
- * this defines which 8260 i/o port pins are connected to the various
- * signals required for programming a Xilinx fpga
- */
-typedef
- struct {
- iopin_t prog_pin; /* assert for >= 300ns to program */
- iopin_t init_pin; /* goes high when fpga is cleared */
- iopin_t done_pin; /* goes high when program is done */
- iopin_t enable_pin; /* some fpgas need enabling */
- }
-xlx_iopins_t;
-
-/* all info about one Xilinx chip */
-typedef
- struct {
- xlx_mmap_t mmap;
- xlx_iopins_t iopins;
- unsigned long irq:8; /* h/w intr req number for this fpga */
- }
-xlx_info_t;
-
-/* all info about one hymod board */
-typedef
- struct {
- hymod_eeprom_t eeprom;
- xlx_info_t xlx[HYMOD_MAX_XLX];
- }
-hymod_board_t;
-
-/*
- * this defines the configuration information of a hymod board-set
- * (main board + possible mezzanine board). In future, there may be
- * more than one mezzanine board (stackable?) - if so, add a "mezz2"
- * field, and so on... or make mezz an array?
- */
-typedef
- struct {
- unsigned long ver:8; /* version control */
- hymod_board_t main; /* main board info */
- hymod_board_t mezz; /* mezzanine board info */
- unsigned long crc; /* ensures kernel and boot prom agree */
- }
-hymod_conf_t;
-
-#endif /* _HYMOD_H_ */
diff --git a/board/hymod/input.c b/board/hymod/input.c
deleted file mode 100644
index a9035d3..0000000
--- a/board/hymod/input.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * (C) Copyright 2003
- * Murray Jensen, CSIRO-MIT, <Murray.Jensen at csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <bootretry.h>
-#include <cli.h>
-
-int
-hymod_get_serno (const char *prompt)
-{
- for (;;) {
- int n, serno;
- char *p;
-
- bootretry_reset_cmd_timeout();
-
- n = cli_readline(prompt);
-
- if (n < 0)
- return (n);
-
- if (n == 0)
- continue;
-
- serno = (int) simple_strtol (console_buffer, &p, 10);
-
- if (p > console_buffer && *p == '\0' && serno > 0)
- return (serno);
-
- printf ("Invalid number (%s) - please re-enter\n",
- console_buffer);
- }
-}
-
-int
-hymod_get_ethaddr (void)
-{
- for (;;) {
- int n;
-
- bootretry_reset_cmd_timeout();
-
- n = cli_readline("Enter board ethernet address: ");
-
- if (n < 0)
- return (n);
-
- if (n == 0)
- continue;
-
- if (n == 17) {
- int i;
- char *p, *q;
-
- /* see if it looks like an ethernet address */
-
- p = console_buffer;
-
- for (i = 0; i < 6; i++) {
- char term = (i == 5 ? '\0' : ':');
-
- (void)simple_strtol (p, &q, 16);
-
- if ((q - p) != 2 || *q++ != term)
- break;
-
- p = q;
- }
-
- if (i == 6) {
- /* it looks ok - set it */
- printf ("Setting ethernet addr to %s\n",
- console_buffer);
-
- setenv ("ethaddr", console_buffer);
-
- puts ("Remember to do a 'saveenv' to "
- "make it permanent\n");
-
- return (0);
- }
- }
-
- printf ("Invalid ethernet addr (%s) - please re-enter\n",
- console_buffer);
- }
-}
diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds
deleted file mode 100644
index 1dfd2b2..0000000
--- a/board/hymod/u-boot.lds
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8260/start.o (.text)
-/*
- common/dlmalloc.o (.text)
- arch/powerpc/lib/ppcstring.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
- lib/zlib.o (.text)
-
- . = env_offset;
-*/
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- _GOT2_TABLE_ = .;
- KEEP(*(.got2))
- KEEP(*(.got))
- PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- . = ALIGN(256 * 1024);
- .ppcenv :
- {
- common/env_embedded.o (.ppcenv)
- }
- . = ALIGN(4);
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/hymod/u-boot.lds.debug b/board/hymod/u-boot.lds.debug
deleted file mode 100644
index b9c84c7..0000000
--- a/board/hymod/u-boot.lds.debug
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/powerpc/cpu/mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib/vsprintf.o (.text)
- lib/crc32.o (.text)
-
- . = env_offset;
- common/env_embedded.o(.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- *(.eh_frame)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
-
- . = ALIGN(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- __bss_end = . ;
- PROVIDE (end = .);
-}
diff --git a/configs/hymod_defconfig b/configs/hymod_defconfig
deleted file mode 100644
index a6dc1d8..0000000
--- a/configs/hymod_defconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC8260=y
-CONFIG_TARGET_HYMOD=y
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 4e99676..57eac91 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
+hymod powerpc mpc8260 - - Murray Jensen <Murray.Jensen at csiro.au>
MHPC powerpc mpc8xx - - Frank Gottschling <fgottschling at eltec.de>
ICU862 powerpc mpc8xx - - Wolfgang Denk <wd at denx.de>
MVBC_P powerpc mpc5xxx af55e35d 2014-09-29 Andre Schwarz <andre.schwarz at matrix-vision.de>
diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h
index 62cb1ea..aef39d7 100644
--- a/include/asm-generic/u-boot.h
+++ b/include/asm-generic/u-boot.h
@@ -79,9 +79,6 @@ typedef struct bd_info {
unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */
unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */
#endif
-#if defined(CONFIG_HYMOD)
- hymod_conf_t bi_hymod_conf; /* hymod configuration information */
-#endif
#ifdef CONFIG_HAS_ETH1
unsigned char bi_enet1addr[6]; /* OLD: see README.enetaddr */
diff --git a/include/common.h b/include/common.h
index d5020c8..c96b58e 100644
--- a/include/common.h
+++ b/include/common.h
@@ -69,9 +69,6 @@ typedef volatile unsigned char vu_char;
#ifdef CONFIG_4xx
#include <asm/ppc4xx.h>
#endif
-#ifdef CONFIG_HYMOD
-#include <board/hymod/hymod.h>
-#endif
#ifdef CONFIG_ARM
#define asmlinkage /* nothing */
#endif
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
deleted file mode 100644
index c973365..0000000
--- a/include/configs/hymod.h
+++ /dev/null
@@ -1,728 +0,0 @@
-/*
- * (C) Copyright 2000
- * Murray Jensen <Murray.Jensen at cmst.csiro.au>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * Config header file for Hymod board
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_HYMOD 1 /* ...on a Hymod board */
-#define CONFIG_CPM2 1 /* Has a CPM2 */
-
-#define CONFIG_SYS_TEXT_BASE 0x40000000
-
-#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
-
-#define CONFIG_BOARD_POSTCLK_INIT /* have board_postclk_init() function */
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere (for example, on the cogent platform, there are serial
- * ports on the motherboard which are used for the serial console - see
- * cogent/cma101/serial.[ch]).
- */
-#undef CONFIG_CONS_ON_SMC /* define if console on SMC */
-#define CONFIG_CONS_ON_SCC /* define if console on SCC */
-#undef CONFIG_CONS_NONE /* define if console on something else*/
-#define CONFIG_CONS_INDEX 1 /* which serial channel for console */
-#define CONFIG_CONS_USE_EXTC /* SMC/SCC use ext clock not brg_clk */
-#define CONFIG_CONS_EXTC_RATE 3686400 /* SMC/SCC ext clk rate in Hz */
-#define CONFIG_CONS_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- */
-#undef CONFIG_ETHER_ON_SCC /* define if ether on SCC */
-#define CONFIG_ETHER_ON_FCC /* define if ether on FCC */
-#undef CONFIG_ETHER_NONE /* define if ether on something else */
-#define CONFIG_ETHER_INDEX 1 /* which channel for ether */
-#define CONFIG_ETHER_LOOPBACK_TEST /* add ether external loopback test */
-
-#ifdef CONFIG_ETHER_ON_FCC
-
-#if (CONFIG_ETHER_INDEX == 1)
-
-/*
- * - Rx-CLK is CLK10
- * - Tx-CLK is CLK11
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK1 (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE1 (CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-# define MDIO_PORT 0 /* Port A */
-# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-# define MDC_DECLARE MDIO_DECLARE
-
-# define MDIO_DATA_PINMASK 0x00040000 /* Pin 13 */
-# define MDIO_CLCK_PINMASK 0x00080000 /* Pin 12 */
-
-#elif (CONFIG_ETHER_INDEX == 2)
-
-/*
- * - Rx-CLK is CLK13
- * - Tx-CLK is CLK14
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-# define MDIO_PORT 0 /* Port A */
-# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-# define MDC_DECLARE MDIO_DECLARE
-
-# define MDIO_DATA_PINMASK 0x00000040 /* Pin 25 */
-# define MDIO_CLCK_PINMASK 0x00000080 /* Pin 24 */
-
-#elif (CONFIG_ETHER_INDEX == 3)
-
-/*
- * - Rx-CLK is CLK15
- * - Tx-CLK is CLK16
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK3 (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE3 (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
-# define CONFIG_SYS_CPMFCR_RAMTYPE 0
-# define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-# define MDIO_PORT 0 /* Port A */
-# define MDIO_DECLARE volatile ioport_t *iop = ioport_addr ( \
- (immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-# define MDC_DECLARE MDIO_DECLARE
-
-# define MDIO_DATA_PINMASK 0x00000100 /* Pin 23 */
-# define MDIO_CLCK_PINMASK 0x00000200 /* Pin 22 */
-
-#endif /* CONFIG_ETHER_INDEX */
-
-#define CONFIG_MII /* MII PHY management */
-#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
-
-#define MDIO_ACTIVE (iop->pdir |= MDIO_DATA_PINMASK)
-#define MDIO_TRISTATE (iop->pdir &= ~MDIO_DATA_PINMASK)
-#define MDIO_READ ((iop->pdat & MDIO_DATA_PINMASK) != 0)
-
-#define MDIO(bit) if(bit) iop->pdat |= MDIO_DATA_PINMASK; \
- else iop->pdat &= ~MDIO_DATA_PINMASK
-
-#define MDC(bit) if(bit) iop->pdat |= MDIO_CLCK_PINMASK; \
- else iop->pdat &= ~MDIO_CLCK_PINMASK
-
-#define MIIDELAY udelay(1)
-
-#endif /* CONFIG_ETHER_ON_FCC */
-
-
-/* other options */
-#define CONFIG_HARD_I2C 1 /* To enable I2C hardware support */
-#define CONFIG_DTT_ADM1021 1 /* ADM1021 temp sensor support */
-
-/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
-#ifdef DEBUG
-#define CONFIG_8260_CLKIN 33333333 /* in Hz */
-#else
-#define CONFIG_8260_CLKIN 66666666 /* in Hz */
-#endif
-
-#if defined(CONFIG_CONS_USE_EXTC)
-#define CONFIG_BAUDRATE 115200
-#else
-#define CONFIG_BAUDRATE 9600
-#endif
-
-/* default ip addresses - these will be overridden */
-#define CONFIG_IPADDR 192.168.1.1 /* hymod "boot" address */
-#define CONFIG_SERVERIP 192.168.1.254 /* hymod "server" address */
-
-#define CONFIG_LAST_STAGE_INIT
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DTT
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_KGDB
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_XIMG
-
-#ifdef DEBUG
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOT_RETRY_TIME 30 /* retry autoboot after 30 secs */
-#define CONFIG_BOOT_RETRY_MIN 1 /* can go down to 1 second timeout */
-/* Be selective on what keys can delay or stop the autoboot process
- * To stop use: " "
- */
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, " \
- "press <SPACE> to stop\n", bootdelay
-#define CONFIG_AUTOBOOT_STOP_STR " "
-#undef CONFIG_AUTOBOOT_DELAY_STR
-#define DEBUG_BOOTKEYS 0
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
-#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
-#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX 2 /* which serial channel for kgdb */
-#define CONFIG_KGDB_USE_EXTC /* SMC/SCC use ext clock not brg_clk */
-#define CONFIG_KGDB_EXTC_RATE 3686400 /* serial ext clk rate in Hz */
-#define CONFIG_KGDB_EXTC_PINSEL 0 /* pin select 0=CLK3/CLK9,1=CLK5/CLK15*/
-# if defined(CONFIG_KGDB_USE_EXTC)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port at */
-# else
-#define CONFIG_KGDB_BAUDRATE 9600 /* speed to run kgdb serial port at */
-# endif
-#endif
-
-#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
-
-#define CONFIG_RTC_PCF8563 /* use Philips PCF8563 RTC */
-
-/*
- * Hymod specific configurable options
- */
-#undef CONFIG_SYS_HYMOD_DBLEDS /* walk mezz board LEDs */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x03c00000 /* 4 ... 60 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0x7e
-
-/* these are for the ST M24C02 2kbit serial i2c eeprom */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* base address */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* bytes of address */
-/* mask of address bits that overflow into the "EEPROM chip address" */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
-
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16 byte write page size */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-#define CONFIG_SYS_I2C_MULTI_EEPROMS 1 /* hymod has two eeproms */
-
-#define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* philips PCF8563 RTC address */
-
-/*
- * standard dtt sensor configuration - bottom bit will determine local or
- * remote sensor of the ADM1021, the rest determines index into
- * CONFIG_SYS_DTT_ADM1021 array below.
- *
- * On HYMOD board, the remote sensor should be connected to the MPC8260
- * temperature diode thingy, but an errata said this didn't work and
- * should be disabled - so it isn't connected.
- */
-#if 0
-#define CONFIG_DTT_SENSORS { 0, 1 }
-#else
-#define CONFIG_DTT_SENSORS { 0 }
-#endif
-
-/*
- * ADM1021 temp sensor configuration (see dtt/adm1021.c for details).
- * there will be one entry in this array for each two (dummy) sensors in
- * CONFIG_DTT_SENSORS.
- *
- * For HYMOD board:
- * - only one ADM1021
- * - i2c addr 0x2a (both ADD0 and ADD1 are N/C)
- * - conversion rate 0x02 = 0.25 conversions/second
- * - ALERT ouput disabled
- * - local temp sensor enabled, min set to 0 deg, max set to 85 deg
- * - remote temp sensor disabled (see comment for CONFIG_DTT_SENSORS above)
- */
-#define CONFIG_SYS_DTT_ADM1021 { { 0x2a, 0x02, 0, 1, 0, 85, 0, } }
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
- *
- * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
- * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
- */
-#ifdef DEBUG
-#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\
- HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\
- HRCW_MODCK_H0010)
-#else
-#define CONFIG_SYS_HRCW_MASTER (HRCW_BPS11|HRCW_CIP|HRCW_L2CPC01|HRCW_DPPC10|\
- HRCW_ISB100|HRCW_BMS|HRCW_MMR11|HRCW_APPC10|\
- HRCW_MODCK_H0101)
-#endif
-/* no slaves so just duplicate the master hrcw */
-#define CONFIG_SYS_HRCW_SLAVE1 CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE2 CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE3 CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE4 CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE5 CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE6 CONFIG_SYS_HRCW_MASTER
-#define CONFIG_SYS_HRCW_SLAVE7 CONFIG_SYS_HRCW_MASTER
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR 0xF0000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in DPRAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_FPGA_BASE 0x80000000
-/*
- * unfortunately, CONFIG_SYS_MONITOR_LEN must include the
- * (very large i.e. 256kB) environment flash sector
- */
-#define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor*/
-#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Mem map for Linux*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase Timeout (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* see README - env sect real size */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE)
-#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value*/
-#endif
-
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers 2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control - initially enable both caches and
- * invalidate contents, then the final state leaves only the instruction
- * cache enabled. Note that Power-On and Hard reset invalidate the caches,
- * but Soft reset does not.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CONFIG_SYS_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
- HID0_IFEM|HID0_ABE)
-#ifdef DEBUG
-#define CONFIG_SYS_HID0_FINAL 0
-#else
-#define CONFIG_SYS_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE)
-#endif
-#define CONFIG_SYS_HID2 0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register 5-5
- *-----------------------------------------------------------------------
- * turn on Checkstop Reset Enable
- */
-#ifdef DEBUG
-#define CONFIG_SYS_RMR 0
-#else
-#define CONFIG_SYS_RMR RMR_CSRE
-#endif
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration 4-25
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_BCR (BCR_ETM)
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration 4-31
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_SIUMCR (SIUMCR_DPPC10|SIUMCR_L2CPC01|\
- SIUMCR_APPC10|SIUMCR_MMR11)
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control 4-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x & Local Bus Monitor enable
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
-#else
-#define CONFIG_SYS_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
- SYPCR_SWRI|SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control 4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CONFIG_SYS_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control 9-8
- *-----------------------------------------------------------------------
- * Ensure DFBRG is Divide by 16
- */
-#define CONFIG_SYS_SCCR (SCCR_DFBRG01)
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration 13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR 0
-
-/*
- * Init Memory Controller:
- *
- * Bank Bus Machine PortSz Device
- * ---- --- ------- ------ ------
- * 0 60x GPCM 32 bit FLASH
- * 1 60x GPCM 32 bit FLASH (same as 0 - unused for now)
- * 2 60x SDRAM 64 bit SDRAM
- * 3 Local UPMC 8 bit Main Xilinx configuration
- * 4 Local GPCM 32 bit Main Xilinx register mode
- * 5 Local UPMB 32 bit Main Xilinx port mode
- * 6 Local UPMC 8 bit Mezz Xilinx configuration
- */
-
-/*
- * Bank 0 - FLASH
- *
- * Quotes from the HYMOD IO Board Reference manual:
- *
- * "The flash memory is two Intel StrataFlash chips, each configured for
- * 16 bit operation and connected to give a 32 bit wide port."
- *
- * "The chip select logic is configured to respond to both *CS0 and *CS1.
- * Therefore the FLASH memory will be mapped to both bank 0 and bank 1.
- * It is suggested that bank 0 be read-only and bank 1 be read/write. The
- * FLASH will then appear as ROM during boot."
- *
- * Initially, we are only going to use bank 0 in read/write mode.
- */
-
-/* 32 bit, read-write, GPCM on 60x bus */
-#define CONFIG_SYS_BR0_PRELIM ((CONFIG_SYS_FLASH_BASE&BRx_BA_MSK)|\
- BRx_PS_32|BRx_MS_GPCM_P|BRx_V)
-/* up to 32 Mb */
-#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(32)|ORxG_CSNT|ORxG_ACS_DIV2|ORxG_SCY_10_CLK)
-
-/*
- * Bank 2 - SDRAM
- *
- * Quotes from the HYMOD IO Board Reference manual:
- *
- * "The main memory is implemented using TC59SM716FTL-10 SDRAM and has a
- * fixed size of 64 Mbytes. The Toshiba TC59SM716FTL-10 is a CMOS synchronous
- * dynamic random access memory organised as 4 banks by 4096 rows by 512
- * columns by 16 bits. Four chips provide a 64-bit port on the 60x bus."
- *
- * "The locations in SDRAM are accessed using multiplexed address pins to
- * specify row and column. The pins also act to specify commands. The state
- * of the inputs *RAS, *CAS and *WE defines the required action. The a10/AP
- * pin may function as a row address or as the AUTO PRECHARGE control line,
- * depending on the cycle type. The 60x bus SDRAM machine allows the MPC8260
- * address lines to be configured to the required multiplexing scheme."
- */
-
-#define CONFIG_SYS_SDRAM_SIZE 64
-
-/* 64 bit, read-write, SDRAM on 60x bus */
-#define CONFIG_SYS_BR2_PRELIM ((CONFIG_SYS_SDRAM_BASE&BRx_BA_MSK)|\
- BRx_PS_64|BRx_MS_SDRAM_P|BRx_V)
-/* 64 Mb, 4 int banks per dev, row start addr bit = A6, 12 row addr lines */
-#define CONFIG_SYS_OR2_PRELIM (MEG_TO_AM(CONFIG_SYS_SDRAM_SIZE)|\
- ORxS_BPD_4|ORxS_ROWST_PBI1_A6|ORxS_NUMR_12)
-
-/*
- * The 60x Bus SDRAM Mode Register (PDSMR) is set as follows:
- *
- * Page Based Interleaving, Refresh Enable, Address Multiplexing where A5
- * is output on A16 pin (A6 on A17, and so on), use address pins A14-A16
- * as bank select, A7 is output on SDA10 during an ACTIVATE command,
- * earliest timing for ACTIVATE command after REFRESH command is 6 clocks,
- * earliest timing for ACTIVATE or REFRESH command after PRECHARGE command
- * is 2 clocks, earliest timing for READ/WRITE command after ACTIVATE
- * command is 2 clocks, earliest timing for PRECHARGE after last data
- * was read is 1 clock, earliest timing for PRECHARGE after last data
- * was written is 1 clock, CAS Latency is 2.
- */
-
-#define CONFIG_SYS_PSDMR (PSDMR_PBI|PSDMR_SDAM_A16_IS_A5|\
- PSDMR_BSMA_A14_A16|PSDMR_SDA10_PBI1_A7|\
- PSDMR_RFRC_6_CLK|PSDMR_PRETOACT_2W|\
- PSDMR_ACTTORW_2W|PSDMR_LDOTOPRE_1C|\
- PSDMR_WRC_1C|PSDMR_CL_2)
-
-/*
- * The 60x bus-assigned SDRAM Refresh Timer (PSRT) (10-31) and the Refresh
- * Timers Prescale (PTP) value in the Memory Refresh Timer Prescaler Register
- * (MPTPR) (10-32) must also be set up (it used to be called the Periodic Timer
- * Prescaler, hence the P instead of the R). The refresh timer period is given
- * by (note that there was a change in the 8260 UM Errata):
- *
- * TimerPeriod = (PSRT + 1) / Fmptc
- *
- * where Fmptc is the BusClock divided by PTP. i.e.
- *
- * TimerPeriod = (PSRT + 1) / (BusClock / PTP)
- *
- * or
- *
- * TImerPeriod = (PTP * (PSRT + 1)) / BusClock
- *
- * The requirement for the Toshiba TC59SM716FTL-10 is that there must be
- * 4K refresh cycles every 64 ms. i.e. one refresh cycle every 64000/4096
- * = 15.625 usecs.
- *
- * So PTP * (PSRT + 1) <= 15.625 * BusClock. At 66.666MHz, PSRT=31 and PTP=32
- * appear to be reasonable.
- */
-
-#ifdef DEBUG
-#define CONFIG_SYS_PSRT 39
-#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV8
-#else
-#define CONFIG_SYS_PSRT 31
-#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV32
-#endif
-
-/*
- * Banks 3,4,5 and 6 - FPGA access
- *
- * Quotes from the HYMOD IO Board Reference manual:
- *
- * "The IO Board is fitted with a Xilinx XCV300E main FPGA. Provision is made
- * for configuring an optional FPGA on the mezzanine interface.
- *
- * Access to the FPGAs may be divided into several catagories:
- *
- * 1. Configuration
- * 2. Register mode access
- * 3. Port mode access
- *
- * The main FPGA is supported for modes 1, 2 and 3. The mezzanine FPGA can be
- * configured only (mode 1). Consequently there are four access types.
- *
- * To improve interface performance and simplify software design, the four
- * possible access types are separately mapped to different memory banks.
- *
- * All are accessed using the local bus."
- *
- * Device Mode Memory Bank Machine Port Size Access
- *
- * Main Configuration 3 UPMC 8bit R/W
- * Main Register 4 GPCM 32bit R/W
- * Main Port 5 UPMB 32bit R/W
- * Mezzanine Configuration 6 UPMC 8bit W/O
- *
- * "Note that mezzanine mode 1 access is write-only."
- */
-
-/* all the bank sizes must be a power of two, greater or equal to 32768 */
-#define FPGA_MAIN_CFG_BASE (CONFIG_SYS_FPGA_BASE)
-#define FPGA_MAIN_CFG_SIZE 32768
-#define FPGA_MAIN_REG_BASE (FPGA_MAIN_CFG_BASE + FPGA_MAIN_CFG_SIZE)
-#define FPGA_MAIN_REG_SIZE 32768
-#define FPGA_MAIN_PORT_BASE (FPGA_MAIN_REG_BASE + FPGA_MAIN_REG_SIZE)
-#define FPGA_MAIN_PORT_SIZE 32768
-#define FPGA_MEZZ_CFG_BASE (FPGA_MAIN_PORT_BASE + FPGA_MAIN_PORT_SIZE)
-#define FPGA_MEZZ_CFG_SIZE 32768
-
-/* 8 bit, read-write, UPMC */
-#define CONFIG_SYS_BR3_PRELIM (FPGA_MAIN_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V)
-/* up to 32Kbyte, burst inhibit */
-#define CONFIG_SYS_OR3_PRELIM (P2SZ_TO_AM(FPGA_MAIN_CFG_SIZE)|ORxU_BI)
-
-/* 32 bit, read-write, GPCM */
-#define CONFIG_SYS_BR4_PRELIM (FPGA_MAIN_REG_BASE|BRx_PS_32|BRx_MS_GPCM_L|BRx_V)
-/* up to 32Kbyte */
-#define CONFIG_SYS_OR4_PRELIM (P2SZ_TO_AM(FPGA_MAIN_REG_SIZE))
-
-/* 32 bit, read-write, UPMB */
-#define CONFIG_SYS_BR5_PRELIM (FPGA_MAIN_PORT_BASE|BRx_PS_32|BRx_MS_UPMB|BRx_V)
-/* up to 32Kbyte */
-#define CONFIG_SYS_OR5_PRELIM (P2SZ_TO_AM(FPGA_MAIN_PORT_SIZE)|ORxU_BI)
-
-/* 8 bit, write-only, UPMC */
-#define CONFIG_SYS_BR6_PRELIM (FPGA_MEZZ_CFG_BASE|BRx_PS_8|BRx_MS_UPMC|BRx_V)
-/* up to 32Kbyte, burst inhibit */
-#define CONFIG_SYS_OR6_PRELIM (P2SZ_TO_AM(FPGA_MEZZ_CFG_SIZE)|ORxU_BI)
-
-/*-----------------------------------------------------------------------
- * MBMR - Machine B Mode 10-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_MBMR (MxMR_BSEL|MxMR_OP_NORM) /* XXX - needs more */
-
-/*-----------------------------------------------------------------------
- * MCMR - Machine C Mode 10-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_MCMR (MxMR_BSEL|MxMR_DSx_2_CYCL) /* XXX - needs more */
-
-/*
- * FPGA I/O Port/Bit information
- */
-
-#define FPGA_MAIN_PROG_PORT IOPIN_PORTA
-#define FPGA_MAIN_PROG_PIN 4 /* PA4 */
-#define FPGA_MAIN_INIT_PORT IOPIN_PORTA
-#define FPGA_MAIN_INIT_PIN 5 /* PA5 */
-#define FPGA_MAIN_DONE_PORT IOPIN_PORTA
-#define FPGA_MAIN_DONE_PIN 6 /* PA6 */
-
-#define FPGA_MEZZ_PROG_PORT IOPIN_PORTA
-#define FPGA_MEZZ_PROG_PIN 0 /* PA0 */
-#define FPGA_MEZZ_INIT_PORT IOPIN_PORTA
-#define FPGA_MEZZ_INIT_PIN 1 /* PA1 */
-#define FPGA_MEZZ_DONE_PORT IOPIN_PORTA
-#define FPGA_MEZZ_DONE_PIN 2 /* PA2 */
-#define FPGA_MEZZ_ENABLE_PORT IOPIN_PORTA
-#define FPGA_MEZZ_ENABLE_PIN 3 /* PA3 */
-
-/*
- * FPGA Interrupt configuration
- */
-#define FPGA_MAIN_IRQ SIU_INT_IRQ2
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT ""
-#define MTDPARTS_DEFAULT ""
-*/
-
-#endif /* __CONFIG_H */
diff --git a/tools/bddb/README b/tools/bddb/README
deleted file mode 100644
index 9bee59a..0000000
--- a/tools/bddb/README
+++ /dev/null
@@ -1,116 +0,0 @@
-Hymod Board Database
-
-(C) Copyright 2001
-Murray Jensen <Murray.Jensen at csiro.au>
-CSIRO Manufacturing Science and Technology, Preston Lab
-
-25-Jun-01
-
-This stuff is a set of PHP/MySQL scripts to implement a custom board
-database. It will need *extensive* hacking to modify it to keep the
-information about your custom boards that you want, however it is a good
-starting point.
-
-How it is used:
-
- 1. a board has gone through all the hardware testing etc and is
- ready to have the flash programmed for the first time - first you
- go to a web page and fill in information about the board in a form
- to register it in a database
-
- 2. the web stuff allocates a (unique) serial number and (optionally)
- a (locally administered) ethernet address and stores the information
- in a database using the serial number as the key (can do whole
- batches of boards in one go and/or use a previously registered board
- as defaults for the new board(s))
-
- 3. it then creates a file in the tftp area of a server somewhere
- containing the board information in a simple text format (one
- per serial number)
-
- 4. all hymod boards have an i2c eeprom, and when U-Boot sees that
- the eeprom is unitialised, it prompts for a serial number and
- ethernet address (if not set), then transfers the file created
- in step 3 from the server and initialises the eeprom from its
- contents
-
-What this means is you can't boot the board until you have allocated a serial
-number, but you don't have to type it all twice - you do it once on the web
-and the board then finds the info it needs to initialise its eeprom. The
-other side of the coin is the reading of the eeprom and how it gets passed
-to Linux (or another O/S).
-
-To see how this is all done for the hymod boards look at the code in the
-"board/hymod" directory and in the file "include/asm/hymod.h". Hymod boards
-can have a mezzanine card which also have an eeprom that needs allocating,
-the same process is used for these as well - just a different i2c address.
-
-Other forms provide the following functions:
-
- - browsing the board database
- - editing board information (one at a time)
- - maintaining/browsing a (simple) per board event log
-
-You will need: MySQL (I use version 3.23.7-alpha), PHP4 (with MySQL
-support enabled) and a web server (I use Apache 1.3.x).
-
-I originally started by using phpMyBuilder (http://kyber.dk/phpMyBuilder)
-but it soon got far more complicated than that could handle (but I left
-the copyright messages in there anyway). Most of the code resides in the
-common defs.php file, which shouldn't need much alteration - all the work
-will be in shaping the front-end php files to your liking.
-
-Here's a quick summary of what needs doing to use it for your boards:
-
-1. get phpMyAdmin (http://phpwizard.net/projects/phpMyAdmin/) - it's an
- invaluable tool for this sort of stuff (this step is optional of course)
-
-2. edit "bddb.css" to your taste, if you could be bothered - I have no
- idea what is in there or what it does - I copied it from somewhere else
- ("user.css" from the phpMyEdit (http://phpmyedit.sourcerforge.net) package,
- I think) - I figure one day I'll see what sort of things I can change
- in there.
-
-3. create a mysql database - call it whatever you like
-
-4. edit "create_tables.sql" and modify the "boards" table schema to
- reflect the information you want to keep about your boards. It may or
- may not be easier to do this and the next step in phpMyAdmin. Check out
- the MySQL documentation at http://www.mysql.com/doc/ in particular the
- column types at http://www.mysql.com/doc/C/o/Column_types.html - Note
- there is only support for a few data types:
-
- int - presented as an html text input
- char/text - presented as an html text input
- date - presented as an html text input
- enum - presented as an html radio input
-
- I also have what I call "enum_multi" which is a set of enums with the
- same name, but suffixed with a number e.g. fred0, fred1, fred2. These
- are presented as a number of html select's with a single label "fred"
- this is useful for board characteristics that have multiple items of
- the same type e.g. multiple banks of sdram.
-
-5. use the "create_tables.sql" file to create the "boards" table in the
- database e.g. mysql dbname < create_tables.sql
-
-6. create a user and password for the web server to log into the MySQL
- database with; give this user select, insert and update privileges
- to the database created in 3 (and delete, if you want the "delete"
- functions in the edit forms to work- I have this turned off). phpMyAdmin
- helps in this step.
-
-7. edit "config.php" and set the variables: $mysql_user, $mysql_pw, $mysql_db,
- $bddb_cfgdir and $bddb_label - keep the contents of this file secret - it
- contains the web servers username and password (the three $mysql_* vars
- are set from the previous step)
-
-8. edit "defs.php" and a. adjust the various enum value arrays and b. edit
- the function "pg_foot()" to remove my email address :-)
-
-9. do major hacking on the following files: browse.php, doedit.php, donew.php,
- edit.php and new.php to reflect your database schema - fortunately the
- hacking is fairly straight-forward, but it is boring and time-consuming.
-
-These notes were written rather hastily - if you find any obvious problems
-please let me know.
diff --git a/tools/bddb/badsubmit.php b/tools/bddb/badsubmit.php
deleted file mode 100644
index 5092a31..0000000
--- a/tools/bddb/badsubmit.php
+++ /dev/null
@@ -1,23 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- require("defs.php");
- pg_head("$bddb_label - Unknown Submit Type");
-?>
-<center>
- <font size="+4">
- <b>
- The <?php echo "$bddb_label"; ?> form was submitted with an
- unknown SUBMIT type <?php echo "(value was '$submit')" ?>.
- <br></br>
- Perhaps you typed the URL in directly? Click here to go to the
- home page of the <a href="index.php"><?php echo "$bddb_label"; ?></a>.
- </b>
- </font>
-</center>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/bddb.css b/tools/bddb/bddb.css
deleted file mode 100644
index dee2b2e..0000000
--- a/tools/bddb/bddb.css
+++ /dev/null
@@ -1,207 +0,0 @@
-BODY {
- background: #e0ffff;
- color: #000000;
- font-family: Arial, Verdana, Helvetica;
-}
-H1 {
- font-family: "Copperplate Gothic Bold";
- background: transparent;
- color: #993300;
- text-align: center;
-}
-H2, H3, H4, H5 {
- background: transparent;
- color: #993300;
- margin-top: 4%;
- text-align: center;
-}
-Body.Plain Div.Abstract, Body.Plain P.Abstract {
- background: #cccc99;
- color: #333300;
- border: white;
- padding: 3%;
- font-family: Times, Verdana;
-}
-TH.Nav {
- background: #0000cc;
- color: #ff9900;
-}
-TH.Menu {
- background: #3366cc;
- color: #ff9900;
-}
-A:hover {
- color: #ff6600;
-}
-A.Menu:hover {
- color: #ff6600;
-}
-A.HoMe:hover {
- color: #ff6600;
-}
-A.Menu {
- background: transparent;
- color: #ffcc33;
- font-family: Verdana, Helvetica, Arial;
- font-size: smaller;
- text-decoration: none;
-}
-A.Menu:visited {
- background: transparent;
- color: #ffcc99;
-}
-A.HoMe {
- background: transparent;
- color: #ffcc33;
- font-family: Verdana, Helvetica, Arial;
- text-decoration:none;
-}
-A.HoMe:visited {
- background: transparent;
- color: #ffcc99;
-}
-TH.Xmp {
- background: #eeeeee;
- color: #330066;
- font-family: courier;
- font-weight: normal;
-}
-TH.LuT {
- background: #cccccc;
- color: #000000;
-}
-TD.LuT {
- background: #ffffcc;
- color: #000000;
- font-size: 85%;
-}
-TH.Info, TD.Info {
- background: #ffffcc;
- color: #660000;
- font-family: "Comic Sans MS", Cursive, Verdana;
- font-size: smaller;
-}
-Div.Info, P.Info {
- background: #ffff99;
- color: #990033;
- text-align: left;
- padding: 2%;
- font-family: "Comic Sans MS", Cursive, Verdana;
- font-size: 85%;
- }
-Div.Info A {
- background: transparent;
- color: #ff6600;
-}
-.HL {
- background: #ffff99;
- color: #000000;
-}
-TD.HL {
- background: #ccffff;
- color: #000000;
-}
-Div.Margins {
- width: 512px;
- text-align: center;
-}
-TD.Plain {
- background: #ffffcc;
- color: #000033;
-}
-.Type {
- background: #cccccc;
- color: #660000;
-}
-.Name {
- background: #eeeeee;
- color: #660000;
- vertical-align: top;
- text-align: right;
-}
-.Value {
- background: #ffffee;
- color: #000066;
-}
-.Drop {
- background: #333366;
- color: #ffcc33;
- font-family: "Copperplate Gothic Light", Helvetica, Verdana, Arial;
-}
-A.Button:hover {
- color: #ff6600;
-}
-A.Button {
- text-decoration:none;
- color: #003366;
- background: #ffcc66;
-}
-.Button {
- font-size: 9pt;
- text-align: center;
- text-decoration:none;
- color: #003366;
- background: #ffcc66;
- margin-bottom: 2pt;
- border-top: 2px solid #ffff99;
- border-left: 2px solid #ffff99;
- border-right: 2px solid #cc9933;
- border-bottom: 2px solid #cc9933;
- font-family: Verdana, Arial, "Comic Sans MS";
-}
-.Banner {
- width: 468;
- font-size: 12pt;
- text-align: center;
- text-decoration:none;
- color: #003366;
- background: #ffcc66;
- border-top: 4px solid #ffff99;
- border-left: 4px solid #ffff99;
- border-right: 4px solid #cc9933;
- border-bottom: 4px solid #cc9933;
- font-family: Verdana, Arial, "Comic Sans MS";
-}
-TD.Nova, Body.Nova {
- background: #000000;
- font-family: "Times New Roman";
- font-weight: light;
- color: #ffcc00;
-}
-Body.Nova A.Button {
- background: gold;
- color: #003366;
-}
-Body.Nova A.Banner {
- background: transparent;
- color: #003366;
-}
-Body.Nova A {
- background: transparent;
- text-decoration:none;
- color: #ffd766;
-}
-Body.Nova H1, Body.Nova H2, Body.Nova H3, Body.Nova H4 {
- background: transparent;
- color: white;
- margin-top: 4%;
- text-align: center;
- filter: Blur(Add=1, Direction=0, Strength=8);
-}
-Body.Nova Div.Abstract {
- background: #000000;
- color: #ffffff;
- font-family: Times, Verdana;
-}
-Body.Nova A.Abstract {
- background: transparent;
- color: #ffeedd;
-}
-Body.Nova TH.LuT {
- background: black;
- color: #ffff99;
-}
-Body.Nova TD.LuT {
- background: navy;
- color: #ffff99;
-}
diff --git a/tools/bddb/brlog.php b/tools/bddb/brlog.php
deleted file mode 100644
index fccfbd0..0000000
--- a/tools/bddb/brlog.php
+++ /dev/null
@@ -1,109 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // list page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Browse Board Log");
-
- $serno=intval($serno);
- if ($serno == 0)
- die("serial number not specified or invalid!");
-
- function print_cell($str) {
- if ($str == '')
- $str = ' ';
- echo "\t<td>$str</td>\n";
- }
-?>
-<table align=center border=1 cellpadding=10>
-<tr>
-<th>serno / edit</th>
-<th>ethaddr</th>
-<th>date</th>
-<th>batch</th>
-<th>type</th>
-<th>rev</th>
-<th>location</th>
-</tr>
-<?php
- $r=mysql_query("select * from boards where serno=$serno");
-
- while($row=mysql_fetch_array($r)){
- foreach ($columns as $key) {
- if (!key_in_array($key, $row))
- $row[$key] = '';
- }
-
- echo "<tr>\n";
- print_cell("<a href=\"edit.php?serno=$row[serno]\">$row[serno]</a>");
- print_cell($row['ethaddr']);
- print_cell($row['date']);
- print_cell($row['batch']);
- print_cell($row['type']);
- print_cell($row['rev']);
- print_cell($row['location']);
- echo "</tr>\n";
- }
-
- mysql_free_result($r);
-?>
-</table>
-<hr></hr>
-<p></p>
-<?php
- $limit=abs(isset($_REQUEST['limit'])?$_REQUEST['limit']:20);
- $offset=abs(isset($_REQUEST['offset'])?$_REQUEST['offset']:0);
- $lr=mysql_query("select count(*) as n from log where serno=$serno");
- $lrow=mysql_fetch_array($lr);
- if($lrow['n']>$limit){
- $preoffset=max(0,$offset-$limit);
- $postoffset=$offset+$limit;
- echo "<table width=\"100%\">\n<tr align=center>\n";
- printf("<td><%sa href=\"%s?submit=Log&serno=$serno&offset=%d\"><img border=0 alt=\"<\" src=\"/icons/left.gif\"></a></td>\n", $offset>0?"":"no", $PHP_SELF, $preoffset);
- printf("<td><%sa href=\"%s?submit=Log&serno=$serno&offset=%d\"><img border=0 alt=\">\" src=\"/icons/right.gif\"></a></td>\n", $postoffset<$lrow['n']?"":"no", $PHP_SELF, $postoffset);
- echo "</tr>\n</table>\n";
- }
- mysql_free_result($lr);
-?>
-<table width="100%" border=1 cellpadding=10>
-<tr valign=top>
-<th>logno / edit</th>
-<th>date</th>
-<th>who</th>
-<th width="70%">details</th>
-</tr>
-<?php
- $r=mysql_query("select * from log where serno=$serno order by logno limit $offset,$limit");
-
- while($row=mysql_fetch_array($r)){
- echo "<tr>\n";
- print_cell("<a href=\"edlog.php?serno=$row[serno]&logno=$row[logno]\">$row[logno]</a>");
- print_cell($row['date']);
- print_cell($row['who']);
- print_cell("<pre>" . urldecode($row['details']) . "</pre>");
- echo "</tr>\n";
- }
-
- mysql_free_result($r);
-?>
-</table>
-<hr></hr>
-<p></p>
-<table width="100%">
-<tr>
- <td align=center>
- <a href="newlog.php?serno=<?php echo "$serno"; ?>">Add to Log</a>
- </td>
- <td align=center>
- <a href="index.php">Back to Start</a>
- </td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/browse.php b/tools/bddb/browse.php
deleted file mode 100644
index 675dfab..0000000
--- a/tools/bddb/browse.php
+++ /dev/null
@@ -1,147 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // list page (hymod_bddb / boards)
-
- require("defs.php");
-
- $serno=isset($_REQUEST['serno'])?$_REQUEST['serno']:'';
-
- $verbose=isset($_REQUEST['verbose'])?intval($_REQUEST['verbose']):0;
-
- pg_head("$bddb_label - Browse database" . ($verbose?" (verbose)":""));
-?>
-<p></p>
-<?php
- $limit=isset($_REQUEST['limit'])?abs(intval($_REQUEST['limit'])):20;
- $offset=isset($_REQUEST['offset'])?abs(intval($_REQUEST['offset'])):0;
-
- if ($serno == '') {
-
- $lr=mysql_query("select count(*) as n from boards");
- $lrow=mysql_fetch_array($lr);
-
- if($lrow['n']>$limit){
- $preoffset=max(0,$offset-$limit);
- $postoffset=$offset+$limit;
- echo "<table width=\"100%\">\n<tr>\n";
- printf("<td align=left><%sa href=\"%s?submit=Browse&offset=%d&verbose=%d\"><img border=0 alt=\"<\" src=\"/icons/left.gif\"></a></td>\n", $offset>0?"":"no", $PHP_SELF, $preoffset, $verbose);
- printf("<td align=right><%sa href=\"%s?submit=Browse&offset=%d&verbose=%d\"><img border=0 alt=\">\" src=\"/icons/right.gif\"></a></td>\n", $postoffset<$lrow['n']?"":"no", $PHP_SELF, $postoffset, $offset);
- echo "</tr>\n</table>\n";
- }
-
- mysql_free_result($lr);
- }
-?>
-<table align=center border=1 cellpadding=10>
-<tr>
-<th></th>
-<th>serno / edit</th>
-<th>ethaddr</th>
-<th>date</th>
-<th>batch</th>
-<th>type</th>
-<th>rev</th>
-<th>location</th>
-<?php
- if ($verbose) {
- echo "<th>comments</th>\n";
- echo "<th>sdram</th>\n";
- echo "<th>flash</th>\n";
- echo "<th>zbt</th>\n";
- echo "<th>xlxtyp</th>\n";
- echo "<th>xlxspd</th>\n";
- echo "<th>xlxtmp</th>\n";
- echo "<th>xlxgrd</th>\n";
- echo "<th>cputyp</th>\n";
- echo "<th>cpuspd</th>\n";
- echo "<th>cpmspd</th>\n";
- echo "<th>busspd</th>\n";
- echo "<th>hstype</th>\n";
- echo "<th>hschin</th>\n";
- echo "<th>hschout</th>\n";
- }
-?>
-</tr>
-<?php
- $query = "select * from boards";
- if ($serno != '') {
- $pre = " where ";
- foreach (preg_split("/[\s,]+/", $serno) as $s) {
- if (preg_match('/^[0-9]+$/',$s))
- $query .= $pre . "serno=" . $s;
- else if (preg_match('/^([0-9]+)-([0-9]+)$/',$s,$m)) {
- $m1 = intval($m[1]); $m2 = intval($m[2]);
- if ($m2 <= $m1)
- die("bad serial number range ($s)");
- $query .= $pre . "(serno>=$m[1] and serno<=$m[2])";
- }
- else
- die("illegal serial number ($s)");
- $pre = " or ";
- }
- }
- $query .= " order by serno";
- if ($serno == '')
- $query .= " limit $offset,$limit";
-
- $r = mysql_query($query);
-
- function print_cell($str) {
- if ($str == '')
- $str = ' ';
- echo "\t<td>$str</td>\n";
- }
-
- while($row=mysql_fetch_array($r)){
- foreach ($columns as $key) {
- if (!key_in_array($key, $row))
- $row[$key] = '';
- }
-
- echo "<tr>\n";
- print_cell("<a href=\"brlog.php?serno=$row[serno]\">Log</a>");
- print_cell("<a href=\"edit.php?serno=$row[serno]\">$row[serno]</a>");
- print_cell($row['ethaddr']);
- print_cell($row['date']);
- print_cell($row['batch']);
- print_cell($row['type']);
- print_cell($row['rev']);
- print_cell($row['location']);
- if ($verbose) {
- print_cell("<pre>\n" . urldecode($row['comments']) .
- "\n\t</pre>");
- print_cell(gather_enum_multi_print("sdram", 4, $row));
- print_cell(gather_enum_multi_print("flash", 4, $row));
- print_cell(gather_enum_multi_print("zbt", 16, $row));
- print_cell(gather_enum_multi_print("xlxtyp", 4, $row));
- print_cell(gather_enum_multi_print("xlxspd", 4, $row));
- print_cell(gather_enum_multi_print("xlxtmp", 4, $row));
- print_cell(gather_enum_multi_print("xlxgrd", 4, $row));
- print_cell($row['cputyp']);
- print_cell($row['cpuspd']);
- print_cell($row['cpmspd']);
- print_cell($row['busspd']);
- print_cell($row['hstype']);
- print_cell($row['hschin']);
- print_cell($row['hschout']);
- }
- echo "</tr>\n";
- }
-?>
-</table>
-<p></p>
-<table width="100%">
-<tr>
- <td align=center><?php
- printf("<a href=\"%s?submit=Browse&offset=%d&verbose=%d%s\">%s Listing</a>\n", $PHP_SELF, $offset, $verbose?0:1, $serno!=''?"&serno=$serno":'', $verbose?"Terse":"Verbose");
- ?></td>
- <td align=center><a href="index.php">Back to Start</a></td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/config.php b/tools/bddb/config.php
deleted file mode 100644
index 6725757..0000000
--- a/tools/bddb/config.php
+++ /dev/null
@@ -1,16 +0,0 @@
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // mysql database access info
- $mysql_user="fred";
- $mysql_pw="apassword";
- $mysql_db="mydbname";
-
- // where to put the eeprom config files
- $bddb_cfgdir = '/tftpboot/bddb';
-
- // what this database is called
- $bddb_label = 'Hymod Board Database';
-?>
diff --git a/tools/bddb/create_tables.sql b/tools/bddb/create_tables.sql
deleted file mode 100644
index a2a5788..0000000
--- a/tools/bddb/create_tables.sql
+++ /dev/null
@@ -1,90 +0,0 @@
-# phpMyAdmin MySQL-Dump
-# http://phpwizard.net/phpMyAdmin/
-#
-# Host: localhost Database : hymod_bddb
-
-# (C) Copyright 2001
-# Murray Jensen <Murray.Jensen at csiro.au>
-# CSIRO Manufacturing and Infrastructure Technology, Preston Lab
-
-# --------------------------------------------------------
-#
-# Table structure for table 'boards'
-#
-
-DROP TABLE IF EXISTS boards;
-CREATE TABLE boards (
- serno int(10) unsigned zerofill NOT NULL auto_increment,
- ethaddr char(17),
- date date NOT NULL,
- batch char(32),
- type enum('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY') NOT NULL,
- rev tinyint(3) unsigned zerofill NOT NULL,
- location char(64),
- comments text,
- sdram0 enum('32M','64M','128M','256M','512M','1G','2G','4G'),
- sdram1 enum('32M','64M','128M','256M','512M','1G','2G','4G'),
- sdram2 enum('32M','64M','128M','256M','512M','1G','2G','4G'),
- sdram3 enum('32M','64M','128M','256M','512M','1G','2G','4G'),
- flash0 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'),
- flash1 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'),
- flash2 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'),
- flash3 enum('4M','8M','16M','32M','64M','128M','256M','512M','1G'),
- zbt0 enum('512K','1M','2M','4M','8M','16M'),
- zbt1 enum('512K','1M','2M','4M','8M','16M'),
- zbt2 enum('512K','1M','2M','4M','8M','16M'),
- zbt3 enum('512K','1M','2M','4M','8M','16M'),
- zbt4 enum('512K','1M','2M','4M','8M','16M'),
- zbt5 enum('512K','1M','2M','4M','8M','16M'),
- zbt6 enum('512K','1M','2M','4M','8M','16M'),
- zbt7 enum('512K','1M','2M','4M','8M','16M'),
- zbt8 enum('512K','1M','2M','4M','8M','16M'),
- zbt9 enum('512K','1M','2M','4M','8M','16M'),
- zbta enum('512K','1M','2M','4M','8M','16M'),
- zbtb enum('512K','1M','2M','4M','8M','16M'),
- zbtc enum('512K','1M','2M','4M','8M','16M'),
- zbtd enum('512K','1M','2M','4M','8M','16M'),
- zbte enum('512K','1M','2M','4M','8M','16M'),
- zbtf enum('512K','1M','2M','4M','8M','16M'),
- xlxtyp0 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'),
- xlxtyp1 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'),
- xlxtyp2 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'),
- xlxtyp3 enum('XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140'),
- xlxspd0 enum('6','7','8','4','5','9','10','11','12'),
- xlxspd1 enum('6','7','8','4','5','9','10','11','12'),
- xlxspd2 enum('6','7','8','4','5','9','10','11','12'),
- xlxspd3 enum('6','7','8','4','5','9','10','11','12'),
- xlxtmp0 enum('COM','IND'),
- xlxtmp1 enum('COM','IND'),
- xlxtmp2 enum('COM','IND'),
- xlxtmp3 enum('COM','IND'),
- xlxgrd0 enum('NORMAL','ENGSAMP'),
- xlxgrd1 enum('NORMAL','ENGSAMP'),
- xlxgrd2 enum('NORMAL','ENGSAMP'),
- xlxgrd3 enum('NORMAL','ENGSAMP'),
- cputyp enum('MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)','MPC8560'),
- cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'),
- cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'),
- busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ'),
- hstype enum('AMCC-S2064A','Xilinx-Rockets'),
- hschin enum('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16'),
- hschout enum('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16'),
- PRIMARY KEY (serno),
- KEY serno (serno),
- UNIQUE serno_2 (serno)
-);
-
-#
-# Table structure for table 'log'
-#
-
-DROP TABLE IF EXISTS log;
-CREATE TABLE log (
- logno int(10) unsigned zerofill NOT NULL auto_increment,
- serno int(10) unsigned zerofill NOT NULL,
- date date NOT NULL,
- details text NOT NULL,
- PRIMARY KEY (logno),
- KEY logno (logno, serno, date),
- UNIQUE logno_2 (logno)
-);
diff --git a/tools/bddb/defs.php b/tools/bddb/defs.php
deleted file mode 100644
index 0b50602..0000000
--- a/tools/bddb/defs.php
+++ /dev/null
@@ -1,710 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // contains mysql user id and password - keep secret
- require("config.php");
-
- if (isset($_REQUEST['logout'])) {
- Header("status: 401 Unauthorized");
- Header("HTTP/1.0 401 Unauthorized");
- Header("WWW-authenticate: basic realm=\"$bddb_label\"");
-
- echo "<html><head><title>" .
- "Access to '$bddb_label' Denied" .
- "</title></head>\n";
- echo "<body bgcolor=#ffffff><br></br><br></br><center><h1>" .
- "You must be an Authorised User " .
- "to access the '$bddb_label'" .
- "</h1>\n</center></body></html>\n";
- exit;
- }
-
- // contents of the various enumerated types - if first item is
- // empty ('') then the enum is allowed to be null (ie "not null"
- // is not set on the column)
-
- // all column names in the database table
- $columns = array(
- 'serno','ethaddr','date','batch',
- 'type','rev','location','comments',
- 'sdram0','sdram1','sdram2','sdram3',
- 'flash0','flash1','flash2','flash3',
- 'zbt0','zbt1','zbt2','zbt3','zbt4','zbt5','zbt6','zbt7',
- 'zbt8','zbt9','zbta','zbtb','zbtc','zbtd','zbte','zbtf',
- 'xlxtyp0','xlxtyp1','xlxtyp2','xlxtyp3',
- 'xlxspd0','xlxspd1','xlxspd2','xlxspd3',
- 'xlxtmp0','xlxtmp1','xlxtmp2','xlxtmp3',
- 'xlxgrd0','xlxgrd1','xlxgrd2','xlxgrd3',
- 'cputyp','cpuspd','cpmspd','busspd',
- 'hstype','hschin','hschout'
- );
-
- // board type
- $type_vals = array('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY');
-
- // Xilinx fpga types
- $xlxtyp_vals = array('','XCV300E','XCV400E','XCV600E','XC2V2000','XC2V3000','XC2V4000','XC2V6000','XC2VP2','XC2VP4','XC2VP7','XC2VP20','XC2VP30','XC2VP50','XC4VFX20','XC4VFX40','XC4VFX60','XC4VFX100','XC4VFX140');
-
- // Xilinx fpga speeds
- $xlxspd_vals = array('','6','7','8','4','5','9','10','11','12');
-
- // Xilinx fpga temperatures (commercial or industrial)
- $xlxtmp_vals = array('','COM','IND');
-
- // Xilinx fpga grades (normal or engineering sample)
- $xlxgrd_vals = array('','NORMAL','ENGSAMP');
-
- // CPU types
- $cputyp_vals = array('','MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)','MPC8560');
-
- // CPU/BUS/CPM clock speeds
- $clk_vals = array('','33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ','300MHZ','333MHZ','366MHZ','400MHZ','433MHZ','466MHZ','500MHZ','533MHZ','566MHZ','600MHZ','633MHZ','666MHZ','700MHZ','733MHZ','766MHZ','800MHZ','833MHZ','866MHZ','900MHZ','933MHZ','966MHZ','1000MHZ','1033MHZ','1066MHZ','1100MHZ','1133MHZ','1166MHZ','1200MHZ','1233MHZ','1266MHZ','1300MHZ','1333MHZ');
-
- // sdram sizes (nbits array is for eeprom config file)
- $sdram_vals = array('','32M','64M','128M','256M','512M','1G','2G','4G');
- $sdram_nbits = array(0,25,26,27,28,29,30,31,32);
-
- // flash sizes (nbits array is for eeprom config file)
- $flash_vals = array('','4M','8M','16M','32M','64M','128M','256M','512M','1G');
- $flash_nbits = array(0,22,23,24,25,26,27,28,29,30);
-
- // zbt ram sizes (nbits array is for write into eeprom config file)
- $zbt_vals = array('','512K','1M','2M','4M','8M','16M');
- $zbt_nbits = array(0,19,20,21,22,23,24);
-
- // high-speed serial attributes
- $hstype_vals = array('','AMCC-S2064A','Xilinx-Rockets');
- $hschin_vals = array('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16');
- $hschout_vals = array('0','1','2','3','4','5','6','7','8','9','10','11','12','13','14','15','16');
-
- // value filters - used when outputting html
- function rev_filter($num) {
- if ($num == 0)
- return "001";
- else
- return sprintf("%03d", $num);
- }
-
- function text_filter($str) {
- return urldecode($str);
- }
-
- mt_srand(time() | getmypid());
-
- // set up MySQL connection
- mysql_connect("", $mysql_user, $mysql_pw) || die("cannot connect");
- mysql_select_db($mysql_db) || die("cannot select db");
-
- // page header
- function pg_head($title)
- {
- echo "<html>\n<head>\n";
- echo "<link rel=stylesheet href=\"bddb.css\" type=\"text/css\" title=\"style sheet\"></link>\n";
- echo "<title>$title</title>\n";
- echo "</head>\n";
- echo "<body>\n";
- echo "<center><h1>$title</h1></center>\n";
- echo "<hr></hr>\n";
- }
-
- // page footer
- function pg_foot()
- {
- echo "<hr></hr>\n";
- echo "<table width=\"100%\"><tr><td align=left>\n<address>" .
- "If you have any problems, email " .
- "<a href=\"mailto:Murray.Jensen at csiro.au\">" .
- "Murray Jensen" .
- "</a></address>\n" .
- "</td><td align=right>\n" .
- "<a href=\"index.php?logout=true\">logout</a>\n" .
- "</td></tr></table>\n";
- echo "<p><small><i>Made with " .
- "<a href=\"http://kyber.dk/phpMyBuilder/\">" .
- "Kyber phpMyBuilder</a></i></small></p>\n";
- echo "</body>\n";
- echo "</html>\n";
- }
-
- // some support functions
-
- if (!function_exists('array_search')) {
-
- function array_search($needle, $haystack, $strict = false) {
-
- if (is_array($haystack) && count($haystack)) {
-
- $ntype = gettype($needle);
-
- foreach ($haystack as $key => $value) {
-
- if ($value == $needle && (!$strict ||
- gettype($value) == $ntype))
- return $key;
- }
- }
-
- return false;
- }
- }
-
- if (!function_exists('in_array')) {
-
- function in_array($needle, $haystack, $strict = false) {
-
- if (is_array($haystack) && count($haystack)) {
-
- $ntype = gettype($needle);
-
- foreach ($haystack as $key => $value) {
-
- if ($value == $needle && (!$strict ||
- gettype($value) == $ntype))
- return true;
- }
- }
-
- return false;
- }
- }
-
- function key_in_array($key, $array) {
- return in_array($key, array_keys($array), true);
- }
-
- function enum_to_index($name, $vals) {
- $index = array_search($GLOBALS[$name], $vals);
- if ($vals[0] != '')
- $index++;
- return $index;
- }
-
- // fetch a value from an array - return empty string is not present
- function get_key_value($key, $array) {
- if (key_in_array($key, $array))
- return $array[$key];
- else
- return '';
- }
-
- function fprintf() {
- $n = func_num_args();
- if ($n < 2)
- return FALSE;
- $a = func_get_args();
- $fp = array_shift($a);
- $x = "\$s = sprintf";
- $sep = '(';
- foreach ($a as $z) {
- $x .= "$sep'$z'";
- $sep = ',';
- }
- $x .= ');';
- eval($x);
- $l = strlen($s);
- $r = fwrite($fp, $s, $l);
- if ($r != $l)
- return FALSE;
- else
- return TRUE;
- }
-
- // functions to display (print) a database table and its columns
-
- function begin_table($ncols) {
- global $table_ncols;
- $table_ncols = $ncols;
- echo "<table align=center width=\"100%\""
- . " border=1 cellpadding=4 cols=$table_ncols>\n";
- }
-
- function begin_field($name, $span = 0) {
- global $table_ncols;
- echo "<tr valign=top>\n";
- echo "\t<th align=center>$name</th>\n";
- if ($span <= 0)
- $span = $table_ncols - 1;
- if ($span > 1)
- echo "\t<td colspan=$span>\n";
- else
- echo "\t<td>\n";
- }
-
- function cont_field($span = 1) {
- echo "\t</td>\n";
- if ($span > 1)
- echo "\t<td colspan=$span>\n";
- else
- echo "\t<td>\n";
- }
-
- function end_field() {
- echo "\t</td>\n";
- echo "</tr>\n";
- }
-
- function end_table() {
- echo "</table>\n";
- }
-
- function print_field($name, $array, $size = 0, $filt='') {
-
- begin_field($name);
-
- if (key_in_array($name, $array))
- $value = $array[$name];
- else
- $value = '';
-
- if ($filt != '')
- $value = $filt($value);
-
- echo "\t\t<input name=$name value=\"$value\"";
- if ($size > 0)
- echo " size=$size maxlength=$size";
- echo "></input>\n";
-
- end_field();
- }
-
- function print_field_multiline($name, $array, $cols, $rows, $filt='') {
-
- begin_field($name);
-
- if (key_in_array($name, $array))
- $value = $array[$name];
- else
- $value = '';
-
- if ($filt != '')
- $value = $filt($value);
-
- echo "\t\t<textarea name=$name " .
- "cols=$cols rows=$rows wrap=off>\n";
- echo "$value";
- echo "</textarea>\n";
-
- end_field();
- }
-
- // print a mysql ENUM as an html RADIO INPUT
- function print_enum($name, $array, $vals, $def = -1) {
-
- begin_field($name);
-
- if (key_in_array($name, $array))
- $chk = array_search($array[$name], $vals, FALSE);
- else
- $chk = $def;
-
- $nval = count($vals);
-
- for ($i = 0; $i < $nval; $i++) {
-
- $val = $vals[$i];
- if ($val == '')
- $pval = "none";
- else
- $pval = "$val";
-
- printf("\t\t<input type=radio name=$name"
- . " value=\"$val\"%s>$pval</input>\n",
- $i == $chk ? " checked" : "");
- }
-
- end_field();
- }
-
- // print a mysql ENUM as an html SELECT INPUT
- function print_enum_select($name, $array, $vals, $def = -1) {
-
- begin_field($name);
-
- echo "\t\t<select name=$name>\n";
-
- if (key_in_array($name, $array))
- $chk = array_search($array[$name], $vals, FALSE);
- else
- $chk = $def;
-
- $nval = count($vals);
-
- for ($i = 0; $i < $nval; $i++) {
-
- $val = $vals[$i];
- if ($val == '')
- $pval = "none";
- else
- $pval = "$val";
-
- printf("\t\t\t<option " .
- "value=\"%s\"%s>%s</option>\n",
- $val, $i == $chk ? " selected" : "", $pval);
- }
-
- echo "\t\t</select>\n";
-
- end_field();
- }
-
- // print a group of mysql ENUMs (e.g. name0,name1,...) as an html SELECT
- function print_enum_multi($base, $array, $vals, $cnt, $defs, $grp = 0) {
-
- global $table_ncols;
-
- if ($grp <= 0)
- $grp = $cnt;
- $ncell = $cnt / $grp;
- $span = ($table_ncols - 1) / $ncell;
-
- begin_field($base, $span);
-
- $nval = count($vals);
-
- for ($i = 0; $i < $cnt; $i++) {
-
- if ($i > 0 && ($i % $grp) == 0)
- cont_field($span);
-
- $name = sprintf("%s%x", $base, $i);
-
- echo "\t\t<select name=$name>\n";
-
- if (key_in_array($name, $array))
- $ai = array_search($array[$name], $vals, FALSE);
- else {
- if (key_in_array($i, $defs))
- $ai = $defs[$i];
- else
- $ai = 0;
- }
-
- for ($j = 0; $j < $nval; $j++) {
-
- $val = $vals[$j];
- if ($val == '')
- $pval = " ";
- else
- $pval = "$val";
-
- printf("\t\t\t<option " .
- "value=\"%s\"%s>%s</option>\n",
- $val,
- $j == $ai ? " selected" : "",
- $pval);
- }
-
- echo "\t\t</select>\n";
- }
-
- end_field();
- }
-
- // functions to handle the form input
-
- // fetch all the parts of an "enum_multi" into a string suitable
- // for a MySQL query
- function gather_enum_multi_query($base, $cnt) {
-
- $retval = '';
-
- for ($i = 0; $i < $cnt; $i++) {
-
- $name = sprintf("%s%x", $base, $i);
-
- if (isset($_REQUEST[$name])) {
- $retval .= sprintf(", %s='%s'",
- $name, $_REQUEST[$name]);
- }
- }
-
- return $retval;
- }
-
- // fetch all the parts of an "enum_multi" into a string suitable
- // for a display e.g. in an html table cell
- function gather_enum_multi_print($base, $cnt, $array) {
-
- $retval = '';
-
- for ($i = 0; $i < $cnt; $i++) {
-
- $name = sprintf("%s%x", $base, $i);
-
- if ($array[$name] != '') {
- if ($retval != '')
- $retval .= ',';
- $retval .= $array[$name];
- }
- }
-
- return $retval;
- }
-
- // fetch all the parts of an "enum_multi" into a string suitable
- // for writing to the eeprom data file
- function gather_enum_multi_write($base, $cnt, $vals, $xfrm = array()) {
-
- $retval = '';
-
- for ($i = 0; $i < $cnt; $i++) {
-
- $name = sprintf("%s%x", $base, $i);
-
- if ($GLOBALS[$name] != '') {
- if ($retval != '')
- $retval .= ',';
- $index = enum_to_index($name, $vals);
- if ($xfrm != array())
- $retval .= $xfrm[$index];
- else
- $retval .= $index;
- }
- }
-
- return $retval;
- }
-
- // count how many parts of an "enum_multi" are actually set
- function count_enum_multi($base, $cnt) {
-
- $retval = 0;
-
- for ($i = 0; $i < $cnt; $i++) {
-
- $name = sprintf("%s%x", $base, $i);
-
- if (isset($_REQUEST[$name]))
- $retval++;
- }
-
- return $retval;
- }
-
- // ethernet address functions
-
- // generate a (possibly not unique) random vendor ethernet address
- // (setting bit 6 in the ethernet address - motorola wise i.e. bit 0
- // is the most significant bit - means it is not an assigned ethernet
- // address - it is a "locally administered" address). Also, make sure
- // it is NOT a multicast ethernet address (by setting bit 7 to 0).
- // e.g. the first byte of all ethernet addresses generated here will
- // have 2 in the bottom two bits (incidentally, these are the first
- // two bits transmitted on the wire, since the octets in ethernet
- // addresses are transmitted LSB first).
-
- function gen_eth_addr($serno) {
-
- $ethaddr_hgh = (mt_rand(0, 65535) & 0xfeff) | 0x0200;
- $ethaddr_mid = mt_rand(0, 65535);
- $ethaddr_low = mt_rand(0, 65535);
-
- return sprintf("%02lx:%02lx:%02lx:%02lx:%02lx:%02lx",
- $ethaddr_hgh >> 8, $ethaddr_hgh & 0xff,
- $ethaddr_mid >> 8, $ethaddr_mid & 0xff,
- $ethaddr_low >> 8, $ethaddr_low & 0xff);
- }
-
- // check that an ethernet address is valid
- function eth_addr_is_valid($ethaddr) {
-
- $ethbytes = split(':', $ethaddr);
-
- if (count($ethbytes) != 6)
- return FALSE;
-
- for ($i = 0; $i < 6; $i++) {
- $ethbyte = $ethbytes[$i];
- if (!ereg('^[0-9a-f][0-9a-f]$', $ethbyte))
- return FALSE;
- }
-
- return TRUE;
- }
-
- // write a simple eeprom configuration file
- function write_eeprom_cfg_file() {
-
- global $sernos, $nsernos, $bddb_cfgdir, $numerrs, $cfgerrs;
- global $date, $batch, $type_vals, $rev;
- global $sdram_vals, $sdram_nbits;
- global $flash_vals, $flash_nbits;
- global $zbt_vals, $zbt_nbits;
- global $xlxtyp_vals, $xlxspd_vals, $xlxtmp_vals, $xlxgrd_vals;
- global $cputyp, $cputyp_vals, $clk_vals;
- global $hstype, $hstype_vals, $hschin, $hschout;
-
- $numerrs = 0;
- $cfgerrs = array();
-
- for ($i = 0; $i < $nsernos; $i++) {
-
- $serno = sprintf("%010d", $sernos[$i]);
-
- $wfp = @fopen($bddb_cfgdir . "/$serno.cfg", "w");
- if (!$wfp) {
- $cfgerrs[$i] = 'file create fail';
- $numerrs++;
- continue;
- }
- set_file_buffer($wfp, 0);
-
- if (!fprintf($wfp, "serno=%d\n", $sernos[$i])) {
- $cfgerrs[$i] = 'cfg wr fail (serno)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
-
- if (!fprintf($wfp, "date=%s\n", $date)) {
- $cfgerrs[$i] = 'cfg wr fail (date)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
-
- if ($batch != '') {
- if (!fprintf($wfp, "batch=%s\n", $batch)) {
- $cfgerrs[$i] = 'cfg wr fail (batch)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $typei = enum_to_index("type", $type_vals);
- if (!fprintf($wfp, "type=%d\n", $typei)) {
- $cfgerrs[$i] = 'cfg wr fail (type)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
-
- if (!fprintf($wfp, "rev=%d\n", $rev)) {
- $cfgerrs[$i] = 'cfg wr fail (rev)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
-
- $s = gather_enum_multi_write("sdram", 4,
- $sdram_vals, $sdram_nbits);
- if ($s != '') {
- $b = fprintf($wfp, "sdram=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (sdram)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $s = gather_enum_multi_write("flash", 4,
- $flash_vals, $flash_nbits);
- if ($s != '') {
- $b = fprintf($wfp, "flash=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (flash)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $s = gather_enum_multi_write("zbt", 16,
- $zbt_vals, $zbt_nbits);
- if ($s != '') {
- $b = fprintf($wfp, "zbt=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (zbt)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $s = gather_enum_multi_write("xlxtyp", 4, $xlxtyp_vals);
- if ($s != '') {
- $b = fprintf($wfp, "xlxtyp=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (xlxtyp)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $s = gather_enum_multi_write("xlxspd", 4, $xlxspd_vals);
- if ($s != '') {
- $b = fprintf($wfp, "xlxspd=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (xlxspd)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $s = gather_enum_multi_write("xlxtmp", 4, $xlxtmp_vals);
- if ($s != '') {
- $b = fprintf($wfp, "xlxtmp=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (xlxtmp)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- $s = gather_enum_multi_write("xlxgrd", 4, $xlxgrd_vals);
- if ($s != '') {
- $b = fprintf($wfp, "xlxgrd=%s\n", $s);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (xlxgrd)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- if ($cputyp != '') {
- $cputypi = enum_to_index("cputyp",$cputyp_vals);
- $cpuspdi = enum_to_index("cpuspd", $clk_vals);
- $busspdi = enum_to_index("busspd", $clk_vals);
- $cpmspdi = enum_to_index("cpmspd", $clk_vals);
- $b = fprintf($wfp, "cputyp=%d\ncpuspd=%d\n" .
- "busspd=%d\ncpmspd=%d\n",
- $cputypi, $cpuspdi, $busspdi, $cpmspdi);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (cputyp)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- if ($hstype != '') {
- $hstypei = enum_to_index("hstype",$hstype_vals);
- $b = fprintf($wfp, "hstype=%d\n" .
- "hschin=%s\nhschout=%s\n",
- $hstypei, $hschin, $hschout);
- if (!$b) {
- $cfgerrs[$i] = 'cfg wr fail (hstype)';
- fclose($wfp);
- $numerrs++;
- continue;
- }
- }
-
- if (!fclose($wfp)) {
- $cfgerrs[$i] = 'file cls fail';
- $numerrs++;
- }
- }
-
- return $numerrs;
- }
-?>
diff --git a/tools/bddb/dodelete.php b/tools/bddb/dodelete.php
deleted file mode 100644
index 4839e36..0000000
--- a/tools/bddb/dodelete.php
+++ /dev/null
@@ -1,65 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // dodelete page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Delete Board Results");
-
- if (!isset($_REQUEST['serno']))
- die("the board serial number was not specified");
- $serno=intval($_REQUEST['serno']);
-
- mysql_query("delete from boards where serno=$serno");
-
- if(mysql_errno()) {
- $errstr = mysql_error();
- echo "\t<font size=+4>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe following error was encountered:\n";
- echo "\t\t</p>\n";
- echo "\t\t<center>\n";
- printf("\t\t\t<b>%s</b>\n", $errstr);
- echo "\t\t</center>\n";
- echo "\t</font>\n";
- }
- else {
- echo "\t<font size=+2>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe board with serial number <b>$serno</b> was"
- . " successfully deleted\n";
- mysql_query("delete from log where serno=$serno");
- if (mysql_errno()) {
- $errstr = mysql_error();
- echo "\t\t\t<font size=+4>\n";
- echo "\t\t\t\t<p>\n";
- echo "\t\t\t\t\tBut the following error occurred " .
- "when deleting the log entries:\n";
- echo "\t\t\t\t</p>\n";
- echo "\t\t\t\t<center>\n";
- printf("\t\t\t\t\t<b>%s</b>\n", $errstr);
- echo "\t\t\t\t</center>\n";
- echo "\t\t\t</font>\n";
- }
- echo "\t\t</p>\n";
- echo "\t</font>\n";
- }
-?>
-<p>
-<table width="100%">
-<tr>
- <td align=center>
- <a href="browse.php">Back to Browse</a>
- </td>
- <td align=center>
- <a href="index.php">Back to Start</a>
- </td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/dodellog.php b/tools/bddb/dodellog.php
deleted file mode 100644
index 9dd78c1..0000000
--- a/tools/bddb/dodellog.php
+++ /dev/null
@@ -1,57 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // dodelete page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Delete Log Entry Results");
-
- if (!isset($_REQUEST['serno']))
- die("the board serial number was not specified");
- $serno=intval($_REQUEST['serno']);
-
- if (!isset($_REQUEST['logno']) || $_REQUEST['logno'] == 0)
- die("the log entry number not specified!");
- $logno=$_REQUEST['logno'];
-
- mysql_query("delete from log where serno=$serno and logno=$logno");
-
- if(mysql_errno()) {
- $errstr = mysql_error();
- echo "\t<font size=+4>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe following error was encountered:\n";
- echo "\t\t</p>\n";
- echo "\t\t<center>\n";
- printf("\t\t\t<b>%s</b>\n", $errstr);
- echo "\t\t</center>\n";
- echo "\t</font>\n";
- }
- else {
- echo "\t<font size=+2>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe log entry with log number <b>$logno</b>\n";
- echo "\t\t\tand serial number <b>$serno</b> ";
- echo "was successfully deleted\n";
- echo "\t\t</p>\n";
- echo "\t</font>\n";
- }
-?>
-<p>
-<table width="100%">
-<tr>
- <td align=center>
- <a href="brlog.php?serno=<?php echo "$serno"; ?>">Back to Log</a>
- </td>
- <td align=center>
- <a href="index.php">Back to Start</a>
- </td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/doedit.php b/tools/bddb/doedit.php
deleted file mode 100644
index 13fbb69..0000000
--- a/tools/bddb/doedit.php
+++ /dev/null
@@ -1,186 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // doedit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Edit Board Results");
-
- if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
- die("the board serial number was not specified");
- $serno=intval($_REQUEST['serno']);
-
- $query="update boards set";
-
- if (isset($_REQUEST['ethaddr'])) {
- $ethaddr=$_REQUEST['ethaddr'];
- if (!eth_addr_is_valid($ethaddr))
- die("ethaddr is invalid ('$ethaddr')");
- $query.=" ethaddr='$ethaddr',";
- }
-
- if (isset($_REQUEST['date'])) {
- $date=$_REQUEST['date'];
- list($y, $m, $d) = split("-", $date);
- if (!checkdate($m, $d, $y) || $y < 1999)
- die("date is invalid (input '$date', " .
- "yyyy-mm-dd '$y-$m-$d')");
- $query.=" date='$date'";
- }
-
- if (isset($_REQUEST['batch'])) {
- $batch=$_REQUEST['batch'];
- if (strlen($batch) > 32)
- die("batch field too long (>32)");
- $query.=", batch='$batch'";
- }
-
- if (isset($_REQUEST['type'])) {
- $type=$_REQUEST['type'];
- if (!in_array($type, $type_vals))
- die("Invalid type ($type) specified");
- $query.=", type='$type'";
- }
-
- if (isset($_REQUEST['rev'])) {
- $rev=$_REQUEST['rev'];
- if (($rev = intval($rev)) <= 0 || $rev > 255)
- die("Revision number is invalid ($rev)");
- $query.=sprintf(", rev=%d", $rev);
- }
-
- if (isset($_REQUEST['location'])) {
- $location=$_REQUEST['location'];
- if (strlen($location) > 64)
- die("location field too long (>64)");
- $query.=", location='$location'";
- }
-
- if (isset($_REQUEST['comments']))
- $comments=$_REQUEST['comments'];
- $query.=", comments='" . rawurlencode($comments) . "'";
-
- $query.=gather_enum_multi_query("sdram", 4);
-
- $query.=gather_enum_multi_query("flash", 4);
-
- $query.=gather_enum_multi_query("zbt", 16);
-
- $query.=gather_enum_multi_query("xlxtyp", 4);
- $nxlx = count_enum_multi("xlxtyp", 4);
-
- $query.=gather_enum_multi_query("xlxspd", 4);
- if (count_enum_multi("xlxspd", 4) != $nxlx)
- die("number of xilinx speeds not same as number of types");
-
- $query.=gather_enum_multi_query("xlxtmp", 4);
- if (count_enum_multi("xlxtmp", 4) != $nxlx)
- die("number of xilinx temps. not same as number of types");
-
- $query.=gather_enum_multi_query("xlxgrd", 4);
- if (count_enum_multi("xlxgrd", 4) != $nxlx)
- die("number of xilinx grades not same as number of types");
-
- if (isset($_REQUEST['cputyp'])) {
- $cputyp=$_REQUEST['cputyp'];
- $query.=", cputyp='$cputyp'";
- if (!isset($_REQUEST['cpuspd']) || $_REQUEST['cpuspd'] == '')
- die("must specify cpu speed if cpu type is defined");
- $cpuspd=$_REQUEST['cpuspd'];
- $query.=", cpuspd='$cpuspd'";
- if (!isset($_REQUEST['cpmspd']) || $_REQUEST['cpmspd'] == '')
- die("must specify cpm speed if cpu type is defined");
- $cpmspd=$_REQUEST['cpmspd'];
- $query.=", cpmspd='$cpmspd'";
- if (!isset($_REQUEST['busspd']) || $_REQUEST['busspd'] == '')
- die("must specify bus speed if cpu type is defined");
- $busspd=$_REQUEST['busspd'];
- $query.=", busspd='$busspd'";
- }
- else {
- if (isset($_REQUEST['cpuspd']))
- die("can't specify cpu speed if there is no cpu");
- if (isset($_REQUEST['cpmspd']))
- die("can't specify cpm speed if there is no cpu");
- if (isset($_REQUEST['busspd']))
- die("can't specify bus speed if there is no cpu");
- }
-
- if (isset($_REQUEST['hschin'])) {
- $hschin=$_REQUEST['hschin'];
- if (($hschin = intval($hschin)) < 0 || $hschin > 4)
- die("Invalid number of hs input chans ($hschin)");
- }
- else
- $hschin = 0;
- if (isset($_REQUEST['hschout'])) {
- $hschout=$_REQUEST['hschout'];
- if (($hschout = intval($hschout)) < 0 || $hschout > 4)
- die("Invalid number of hs output chans ($hschout)");
- }
- else
- $hschout = 0;
- if (isset($_REQUEST['hstype'])) {
- $hstype=$_REQUEST['hstype'];
- $query.=", hstype='$hstype'";
- }
- else {
- if ($_REQUEST['hschin'] != 0)
- die("number of high-speed input channels must be zero"
- . " if high-speed chip is not present");
- if ($_REQUEST['hschout'] != 0)
- die("number of high-speed output channels must be zero"
- . " if high-speed chip is not present");
- }
- $query.=", hschin='$hschin'";
- $query.=", hschout='$hschout'";
-
- $query.=" where serno=$serno";
-
- mysql_query($query);
- if(mysql_errno()) {
- $errstr = mysql_error();
- echo "\t<font size=+4>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe following error was encountered:\n";
- echo "\t\t</p>\n";
- echo "\t\t<center>\n";
- printf("\t\t\t<b>%s</b>\n", $errstr);
- echo "\t\t</center>\n";
- echo "\t</font>\n";
- }
- else {
- $sernos = array($serno);
- $nsernos = 1;
-
- write_eeprom_cfg_file();
-
- echo "\t<font size=+2>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe board with serial number <b>$serno</b> was"
- . " successfully updated";
- if ($numerrs > 0) {
- $errstr = $cfgerrs[0];
- echo "<br>\n\t\t\t";
- echo "(but the cfg file update failed: $errstr)";
- }
- echo "\n";
- echo "\t\t</p>\n";
- echo "\t</font>\n";
- }
-
-?>
-<p>
-<table align=center width="100%">
-<tr>
- <td align=center><a href="browse.php">Back to Browse</a></td>
- <td align=center><a href="index.php">Back to Start</a></td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/doedlog.php b/tools/bddb/doedlog.php
deleted file mode 100644
index 7009aa7..0000000
--- a/tools/bddb/doedlog.php
+++ /dev/null
@@ -1,76 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // doedit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Edit Log Entry Results");
-
- if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
- die("the board serial number was not specified");
- $serno=intval($_REQUEST['serno']);
-
- if (!isset($_REQUEST['logno']) || $_REQUEST['logno'] == '')
- die("log number not specified!");
- $logno=intval($_REQUEST['logno']);
-
- $query="update log set";
-
- if (isset($_REQUEST['date'])) {
- $date=$_REQUEST['date'];
- list($y, $m, $d) = split("-", $date);
- if (!checkdate($m, $d, $y) || $y < 1999)
- die("date is invalid (input '$date', " .
- "yyyy-mm-dd '$y-$m-$d')");
- $query.=" date='$date'";
- }
-
- if (isset($_REQUEST['who'])) {
- $who=$_REQUEST['who'];
- $query.=", who='" . $who . "'";
- }
-
- if (isset($_REQUEST['details'])) {
- $details=$_REQUEST['details'];
- $query.=", details='" . rawurlencode($details) . "'";
- }
-
- $query.=" where serno=$serno and logno=$logno";
-
- mysql_query($query);
- if(mysql_errno()) {
- $errstr = mysql_error();
- echo "\t<font size=+4>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe following error was encountered:\n";
- echo "\t\t</p>\n";
- echo "\t\t<center>\n";
- printf("\t\t\t<b>%s</b>\n", $errstr);
- echo "\t\t</center>\n";
- echo "\t</font>\n";
- }
- else {
- echo "\t<font size=+2>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe log entry with log number <b>$logno</b> and\n";
- echo "\t\t\tserial number <b>$serno</b> ";
- echo "was successfully updated\n";
- echo "\t\t</p>\n";
- echo "\t</font>\n";
- }
-
-?>
-<p>
-<table align=center width="100%">
-<tr>
- <td align=center><a href="brlog.php?serno=<?php echo "$serno"; ?>">Back to Log</a></td>
- <td align=center><a href="index.php">Back to Start</a></td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/donew.php b/tools/bddb/donew.php
deleted file mode 100644
index 39b2c78..0000000
--- a/tools/bddb/donew.php
+++ /dev/null
@@ -1,230 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // doedit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Board Registration Results");
-
- if (isset($_REQUEST['serno'])) {
- $serno=$_REQUEST['serno'];
- die("serial number must not be set ($serno) when Creating!");
- }
-
- $query="update boards set";
-
- list($y, $m, $d) = split("-", $date);
- if (!checkdate($m, $d, $y) || $y < 1999)
- die("date is invalid (input '$date', yyyy-mm-dd '$y-$m-$d')");
- $query.=" date='$date'";
-
- if ($batch != '') {
- if (strlen($batch) > 32)
- die("batch field too long (>32)");
- $query.=", batch='$batch'";
- }
-
- if (!in_array($type, $type_vals))
- die("Invalid type ($type) specified");
- $query.=", type='$type'";
-
- if (($rev = intval($rev)) <= 0 || $rev > 255)
- die("Revision number is invalid ($rev)");
- $query.=sprintf(", rev=%d", $rev);
-
- $query.=gather_enum_multi_query("sdram", 4);
-
- $query.=gather_enum_multi_query("flash", 4);
-
- $query.=gather_enum_multi_query("zbt", 16);
-
- $query.=gather_enum_multi_query("xlxtyp", 4);
- $nxlx = count_enum_multi("xlxtyp", 4);
-
- $query.=gather_enum_multi_query("xlxspd", 4);
- if (count_enum_multi("xlxspd", 4) != $nxlx)
- die("number of xilinx speeds not same as number of types");
-
- $query.=gather_enum_multi_query("xlxtmp", 4);
- if (count_enum_multi("xlxtmp", 4) != $nxlx)
- die("number of xilinx temps. not same as number of types");
-
- $query.=gather_enum_multi_query("xlxgrd", 4);
- if (count_enum_multi("xlxgrd", 4) != $nxlx)
- die("number of xilinx grades not same as number of types");
-
- if ($cputyp == '') {
- if ($cpuspd != '')
- die("can't specify cpu speed if there is no cpu");
- if ($cpmspd != '')
- die("can't specify cpm speed if there is no cpu");
- if ($busspd != '')
- die("can't specify bus speed if there is no cpu");
- }
- else {
- $query.=", cputyp='$cputyp'";
- if ($cpuspd == '')
- die("must specify cpu speed if cpu type is defined");
- $query.=", cpuspd='$cpuspd'";
- if ($cpmspd == '')
- die("must specify cpm speed if cpu type is defined");
- $query.=", cpmspd='$cpmspd'";
- if ($busspd == '')
- die("must specify bus speed if cpu type is defined");
- $query.=", busspd='$busspd'";
- }
-
- if (($hschin = intval($hschin)) < 0 || $hschin > 4)
- die("Invalid number of hs input chans ($hschin)");
- if (($hschout = intval($hschout)) < 0 || $hschout > 4)
- die("Invalid number of hs output chans ($hschout)");
- if ($hstype == '') {
- if ($hschin != 0)
- die("number of high-speed input channels must be zero"
- . " if high-speed chip is not present");
- if ($hschout != 0)
- die("number of high-speed output channels must be zero"
- . " if high-speed chip is not present");
- }
- else
- $query.=", hstype='$hstype'";
- $query.=", hschin='$hschin'";
- $query.=", hschout='$hschout'";
-
- // echo "final query = '$query'<br>\n";
-
- $quant = intval($quant);
- if ($quant <= 0) $quant = 1;
-
- $sernos = array();
- if ($geneths)
- $ethaddrs = array();
-
- $sqlerr = '';
-
- while ($quant-- > 0) {
-
- mysql_query("insert into boards (serno) values (null)");
- if (mysql_errno()) {
- $sqlerr = mysql_error();
- break;
- }
-
- $serno = mysql_insert_id();
- if (!$serno) {
- $sqlerr = "couldn't allocate new serial number";
- break;
- }
-
- mysql_query($query . " where serno=$serno");
- if (mysql_errno()) {
- $sqlerr = mysql_error();
- break;
- }
-
- array_push($sernos, $serno);
-
- if ($geneths) {
-
- $ethaddr = gen_eth_addr($serno);
-
- mysql_query("update boards set ethaddr='$ethaddr'" .
- " where serno=$serno");
- if (mysql_errno()) {
- $sqlerr = mysql_error();
-
- array_push($ethaddrs,
- "<font color=#ff0000><b>" .
- "db save fail" .
- "</b></font>");
- break;
- }
-
- array_push($ethaddrs, $ethaddr);
- }
- }
-
- $nsernos = count($sernos);
-
- if ($nsernos > 0) {
-
- write_eeprom_cfg_file();
-
- echo "<font size=+2>\n";
- echo "\t<p>\n";
- echo "\t\tThe following board serial numbers were"
- . " successfully allocated";
- if ($numerrs > 0)
- echo " (but with $numerrs cfg file error" .
- ($numerrs > 1 ? "s" : "") . ")";
- echo ":\n";
- echo "\t</p>\n";
-
- echo "</font>\n";
-
- echo "<table align=center width=\"100%\">\n";
- echo "<tr>\n";
- echo "\t<th>Serial Number</th>\n";
- if ($numerrs > 0)
- echo "\t<th>Cfg File Errs</th>\n";
- if ($geneths)
- echo "\t<th>Ethernet Address</th>\n";
- echo "</tr>\n";
-
- for ($i = 0; $i < $nsernos; $i++) {
-
- $serno = sprintf("%010d", $sernos[$i]);
-
- echo "<tr>\n";
-
- echo "\t<td align=center><font size=+2>" .
- "<b>$serno</b></font></td>\n";
-
- if ($numerrs > 0) {
- if (($errstr = $cfgerrs[$i]) == '')
- $errstr = ' ';
- echo "\t<td align=center>" .
- "<font size=+2 color=#ff0000><b>" .
- $errstr .
- "</b></font></td>\n";
- }
-
- if ($geneths) {
- echo "\t<td align=center>" .
- "<font size=+2 color=#00ff00><b>" .
- $ethaddrs[$i] .
- "</b></font></td>\n";
- }
-
- echo "</tr>\n";
- }
-
- echo "</table>\n";
- }
-
- if ($sqlerr != '') {
- echo "\t<font size=+4>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe following SQL error was encountered:\n";
- echo "\t\t</p>\n";
- echo "\t\t<center>\n";
- printf("\t\t\t<b>%s</b>\n", $sqlerr);
- echo "\t\t</center>\n";
- echo "\t</font>\n";
- }
-
-?>
-<p>
-<table align=center width="100%">
-<tr>
- <td align=center><a href="browse.php">Go to Browse</a></td>
- <td align=center><a href="index.php">Back to Start</a></td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/donewlog.php b/tools/bddb/donewlog.php
deleted file mode 100644
index 7635d29..0000000
--- a/tools/bddb/donewlog.php
+++ /dev/null
@@ -1,86 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // doedit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Add Log Entry Results");
-
- if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
- die("serial number not specified!");
- $serno=intval($_REQUEST['serno']);
-
- if (isset($_REQUEST['logno'])) {
- $logno=$_REQUEST['logno'];
- die("log number must not be set ($logno) when Creating!");
- }
-
- $query="update log set serno=$serno";
-
- list($y, $m, $d) = split("-", $date);
- if (!checkdate($m, $d, $y) || $y < 1999)
- die("date is invalid (input '$date', yyyy-mm-dd '$y-$m-$d')");
- $query.=", date='$date'";
-
- if (isset($_REQUEST['who'])) {
- $who=$_REQUEST['who'];
- $query.=", who='" . $who . "'";
- }
-
- if (isset($_REQUEST['details'])) {
- $details=$_REQUEST['details'];
- $query.=", details='" . rawurlencode($details) . "'";
- }
-
- // echo "final query = '$query'<br>\n";
-
- $sqlerr = '';
-
- mysql_query("insert into log (logno) values (null)");
- if (mysql_errno())
- $sqlerr = mysql_error();
- else {
- $logno = mysql_insert_id();
- if (!$logno)
- $sqlerr = "couldn't allocate new serial number";
- else {
- mysql_query($query . " where logno=$logno");
- if (mysql_errno())
- $sqlerr = mysql_error();
- }
- }
-
- if ($sqlerr == '') {
- echo "<font size=+2>\n";
- echo "\t<p>\n";
- echo "\t\tA log entry with log number '$logno' was " .
- "added to the board with serial number '$serno'\n";
- echo "\t</p>\n";
- echo "</font>\n";
- }
- else {
- echo "\t<font size=+4>\n";
- echo "\t\t<p>\n";
- echo "\t\t\tThe following SQL error was encountered:\n";
- echo "\t\t</p>\n";
- echo "\t\t<center>\n";
- printf("\t\t\t<b>%s</b>\n", $sqlerr);
- echo "\t\t</center>\n";
- echo "\t</font>\n";
- }
-
-?>
-<p></p>
-<table width="100%">
-<tr>
- <td align=center><a href="brlog.php?serno=<?php echo "$serno"; ?>">Go to Browse</a></td>
- <td align=center><a href="index.php">Back to Start</a></td>
-</tr>
-</table>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/edit.php b/tools/bddb/edit.php
deleted file mode 100644
index dd8c26c..0000000
--- a/tools/bddb/edit.php
+++ /dev/null
@@ -1,131 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // edit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Edit Board Registration");
-
- if ($serno == 0)
- die("serial number not specified or invalid!");
-
- $pserno = sprintf("%010d", $serno);
-
- echo "<center><b><font size=+2>";
- echo "Board Serial Number: $pserno";
- echo "</font></b></center>\n";
-
-?>
-<p>
-<form action=doedit.php method=POST>
-<?php
- echo "<input type=hidden name=serno value=$serno>\n";
-
- $r=mysql_query("select * from boards where serno=$serno");
- $row=mysql_fetch_array($r);
- if(!$row) die("no record of serial number '$serno' in database");
-
- begin_table(5);
-
- // ethaddr char(17)
- print_field("ethaddr", $row, 17);
-
- // date date
- print_field("date", $row);
-
- // batch char(32)
- print_field("batch", $row, 32);
-
- // type enum('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY')
- print_enum("type", $row, $type_vals);
-
- // rev tinyint(3) unsigned zerofill
- print_field("rev", $row, 3, 'rev_filter');
-
- // location char(64)
- print_field("location", $row, 64);
-
- // comments text
- print_field_multiline("comments", $row, 60, 10, 'text_filter');
-
- // sdram[0-3] enum('32M','64M','128M','256M')
- print_enum_multi("sdram", $row, $sdram_vals, 4, array());
-
- // flash[0-3] enum('4M','8M','16M','32M','64M')
- print_enum_multi("flash", $row, $flash_vals, 4, array());
-
- // zbt[0-f] enum('512K','1M','2M','4M')
- print_enum_multi("zbt", $row, $zbt_vals, 16, array());
-
- // xlxtyp[0-3] enum('XCV300E','XCV400E','XCV600E')
- print_enum_multi("xlxtyp", $row, $xlxtyp_vals, 4, array(), 1);
-
- // xlxspd[0-3] enum('6','7','8')
- print_enum_multi("xlxspd", $row, $xlxspd_vals, 4, array(), 1);
-
- // xlxtmp[0-3] enum('COM','IND')
- print_enum_multi("xlxtmp", $row, $xlxtmp_vals, 4, array(), 1);
-
- // xlxgrd[0-3] enum('NORMAL','ENGSAMP')
- print_enum_multi("xlxgrd", $row, $xlxgrd_vals, 4, array(), 1);
-
- // cputyp enum('MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)')
- print_enum("cputyp", $row, $cputyp_vals);
-
- // cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
- print_enum_select("cpuspd", $row, $clk_vals);
-
- // cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
- print_enum_select("cpmspd", $row, $clk_vals);
-
- // busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
- print_enum_select("busspd", $row, $clk_vals);
-
- // hstype enum('AMCC-S2064A')
- print_enum("hstype", $row, $hstype_vals);
-
- // hschin enum('0','1','2','3','4')
- print_enum("hschin", $row, $hschin_vals);
-
- // hschout enum('0','1','2','3','4')
- print_enum("hschout", $row, $hschout_vals);
-
- end_table();
-
- echo "<p>\n";
- echo "<center><b>";
- echo "<font color=#ff0000>WARNING: NO UNDO ON DELETE!</font>";
- echo "<br></br>\n";
- echo "<tt>[ <a href=\"dodelete.php?serno=$serno\">delete</a> ]</tt>";
- echo "</b></center>\n";
- echo "</p>\n";
-?>
-<p>
-<table align=center width="100%">
-<tr>
- <td align=center>
- <input type=submit value=Edit>
- </td>
- <td>
-
- </td>
- <td align=center>
- <input type=reset value=Reset>
- </td>
- <td>
-
- </td>
- <td align=center>
- <a href="index.php">Back to Start</a>
- </td>
-</tr>
-</table>
-</p>
-</form>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/edlog.php b/tools/bddb/edlog.php
deleted file mode 100644
index 8befd35..0000000
--- a/tools/bddb/edlog.php
+++ /dev/null
@@ -1,86 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // edit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - Edit Board Log Entry");
-
- if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
- die("serial number not specified!");
- $serno=intval($_REQUEST['serno']);
-
- if (!isset($_REQUEST['logno']) || $_REQUEST['logno'] == '')
- die("log number not specified!");
- $logno=intval($_REQUEST['logno']);
-
- $pserno = sprintf("%010d", $serno);
- $plogno = sprintf("%010d", $logno);
-
- echo "<center><b><font size=+2>";
- echo "Board Serial Number: $pserno, Log Number: $plogno";
- echo "</font></b></center>\n";
-
-?>
-<p>
-<form action=doedlog.php method=POST>
-<?php
- echo "<input type=hidden name=serno value=$serno>\n";
- echo "<input type=hidden name=logno value=$logno>\n";
-
- $r=mysql_query("select * from log where serno=$serno and logno=$logno");
- $row=mysql_fetch_array($r);
- if(!$row)
- die("no record of log entry with serial number '$serno' " .
- "and log number '$logno' in database");
-
- begin_table(3);
-
- // date date
- print_field("date", $row);
-
- // who char(20)
- print_field("who", $row);
-
- // details text
- print_field_multiline("details", $row, 60, 10, 'text_filter');
-
- end_table();
-
- echo "<p>\n";
- echo "<center><b>";
- echo "<font color=#ff0000>WARNING: NO UNDO ON DELETE!</font>";
- echo "<br></br>\n";
- echo "<tt>[ <a href=\"dodellog.php?serno=$serno&logno=$logno\">delete</a> ]</tt>";
- echo "</b></center>\n";
- echo "</p>\n";
-?>
-<p>
-<table align=center width="100%">
-<tr>
- <td align=center>
- <input type=submit value=Edit>
- </td>
- <td>
-
- </td>
- <td align=center>
- <input type=reset value=Reset>
- </td>
- <td>
-
- </td>
- <td align=center>
- <a href="index.php">Back to Start</a>
- </td>
-</tr>
-</table>
-</p>
-</form>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/execute.php b/tools/bddb/execute.php
deleted file mode 100644
index 0b62882..0000000
--- a/tools/bddb/execute.php
+++ /dev/null
@@ -1,33 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- $serno=isset($_REQUEST['serno'])?$_REQUEST['serno']:'';
-
- $submit=isset($_REQUEST['submit'])?$_REQUEST['submit']:"[NOT SET]";
-
- switch ($submit) {
-
- case "New":
- require("new.php");
- break;
-
- case "Edit":
- require("edit.php");
- break;
-
- case "Browse":
- require("browse.php");
- break;
-
- case "Log":
- require("brlog.php");
- break;
-
- default:
- require("badsubmit.php");
- break;
- }
-?>
diff --git a/tools/bddb/index.php b/tools/bddb/index.php
deleted file mode 100644
index 842aed5..0000000
--- a/tools/bddb/index.php
+++ /dev/null
@@ -1,38 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- require("defs.php");
- pg_head("$bddb_label");
-?>
-<font size="+4">
- <form action=execute.php method=POST>
- <table width="100%" cellspacing=10 cellpadding=10>
- <tr>
- <td align=center>
- <input type=submit name=submit value="New"></input>
- </td>
- <td align=center>
- <input type=submit name=submit value="Edit"></input>
- </td>
- <td align=center>
- <input type=submit name=submit value="Browse"></input>
- </td>
- <td align=center>
- <input type=submit name=submit value="Log"></input>
- </td>
- </tr>
- <tr>
- <td align=center colspan=4>
- <b>Serial Number:</b>
- <input type=text name=serno size=10 maxsize=10 value=""></input>
- </td>
- </tr>
- </table>
- </form>
-</font>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/new.php b/tools/bddb/new.php
deleted file mode 100644
index 30323ff..0000000
--- a/tools/bddb/new.php
+++ /dev/null
@@ -1,120 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // edit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - New Board Registration");
-?>
-<form action=donew.php method=POST>
-<p></p>
-<?php
- $serno=intval($serno);
- // if a serial number was supplied, fetch the record
- // and use its contents as defaults
- if ($serno != 0) {
- $r=mysql_query("select * from boards where serno=$serno");
- $row=mysql_fetch_array($r);
- if(!$row)die("no record of serial number '$serno' in database");
- }
- else
- $row = array();
-
- begin_table(5);
-
- // date date
- print_field("date", array('date' => date("Y-m-d")));
-
- // batch char(32)
- print_field("batch", $row, 32);
-
- // type enum('IO','CLP','DSP','INPUT','ALT-INPUT','DISPLAY')
- print_enum("type", $row, $type_vals, 0);
-
- // rev tinyint(3) unsigned zerofill
- print_field("rev", $row, 3, 'rev_filter');
-
- // sdram[0-3] enum('32M','64M','128M','256M')
- print_enum_multi("sdram", $row, $sdram_vals, 4, array(2));
-
- // flash[0-3] enum('4M','8M','16M','32M','64M')
- print_enum_multi("flash", $row, $flash_vals, 4, array(2));
-
- // zbt[0-f] enum('512K','1M','2M','4M')
- print_enum_multi("zbt", $row, $zbt_vals, 16, array(2, 2));
-
- // xlxtyp[0-3] enum('XCV300E','XCV400E','XCV600E')
- print_enum_multi("xlxtyp", $row, $xlxtyp_vals, 4, array(1), 1);
-
- // xlxspd[0-3] enum('6','7','8')
- print_enum_multi("xlxspd", $row, $xlxspd_vals, 4, array(1), 1);
-
- // xlxtmp[0-3] enum('COM','IND')
- print_enum_multi("xlxtmp", $row, $xlxtmp_vals, 4, array(1), 1);
-
- // xlxgrd[0-3] enum('NORMAL','ENGSAMP')
- print_enum_multi("xlxgrd", $row, $xlxgrd_vals, 4, array(1), 1);
-
- // cputyp enum('MPC8260(HIP3)','MPC8260A(HIP4)','MPC8280(HIP7)')
- print_enum("cputyp", $row, $cputyp_vals, 1);
-
- // cpuspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
- print_enum_select("cpuspd", $row, $clk_vals, 4);
-
- // cpmspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
- print_enum_select("cpmspd", $row, $clk_vals, 4);
-
- // busspd enum('33MHZ','66MHZ','100MHZ','133MHZ','166MHZ','200MHZ','233MHZ','266MHZ')
- print_enum_select("busspd", $row, $clk_vals, 2);
-
- // hstype enum('AMCC-S2064A')
- print_enum("hstype", $row, $hstype_vals, 1);
-
- // hschin enum('0','1','2','3','4')
- print_enum("hschin", $row, $hschin_vals, 4);
-
- // hschout enum('0','1','2','3','4')
- print_enum("hschout", $row, $hschout_vals, 4);
-
- end_table();
-?>
-<p></p>
-<table width="100%">
-<tr>
- <td align=center colspan=3>
- Allocate
- <input type=text name=quant size=2 maxlength=2 value=" 1">
- board serial number(s)
- </td>
-</tr>
-<tr>
- <td align=center colspan=3>
- <input type=checkbox name=geneths checked>
- Generate Ethernet Address(es)
- </td>
-</tr>
-<tr>
- <td colspan=3>
-
- </td>
-</tr>
-<tr>
- <td align=center>
- <input type=submit value="Register Board">
- </td>
- <td>
-
- </td>
- <td align=center>
- <input type=reset value="Reset Form Contents">
- </td>
-</tr>
-</table>
-</form>
-<?php
- pg_foot();
-?>
diff --git a/tools/bddb/newlog.php b/tools/bddb/newlog.php
deleted file mode 100644
index 609bb85..0000000
--- a/tools/bddb/newlog.php
+++ /dev/null
@@ -1,54 +0,0 @@
-<?php // php pages made with phpMyBuilder <http://kyber.dk/phpMyBuilder> ?>
-<?php
- // (C) Copyright 2001
- // Murray Jensen <Murray.Jensen at csiro.au>
- // CSIRO Manufacturing Science and Technology, Preston Lab
-
- // edit page (hymod_bddb / boards)
-
- require("defs.php");
-
- pg_head("$bddb_label - New Log Entry");
-
- if (!isset($_REQUEST['serno']) || $_REQUEST['serno'] == '')
- die("serial number not specified or invalid!");
- $serno=intval($_REQUEST['serno']);
-
- if (isset($_REQUEST['logno'])) {
- $logno=$_REQUEST['logno'];
- die("log number must not be specified when adding! ($logno)");
- }
-?>
-<form action=donewlog.php method=POST>
-<p></p>
-<?php
- echo "<input type=hidden name=serno value=$serno>\n";
-
- begin_table(3);
-
- // date date
- print_field("date", array('date' => date("Y-m-d")));
-
- // who char(20)
- print_field("who", array());
-
- // details text
- print_field_multiline("details", array(), 60, 10, 'text_filter');
-
- end_table();
-?>
-<p></p>
-<table width="100%">
-<tr>
- <td align=center>
- <input type=submit value="Add Log Entry">
- </td>
- <td align=center>
- <input type=reset value="Reset Form Contents">
- </td>
-</tr>
-</table>
-</form>
-<?php
- pg_foot();
-?>
--
2.0.0
More information about the U-Boot
mailing list