[U-Boot] [PATCH 00/32] ARM: i.MX: nitrogen6x clean up

[Eric Nelson]

This collection of patches comprises a set of updates that have
been lingering in our Github repository.

We're pushing them to main-line in preparation for the addition
of a couple of boards that have also been lingering for a while.

Patches 1-9 are tweaks to the mx6qsabrelite/nitrogen6x initialization
code.

Patches 10-18 add support for additional displays supported by
the board(s) and tweak the HDMI detection.

Patches 19-32 enable and configure various features through
changes to include/configs/nitrogen6x.h.

Diego Rondini (1):
  nitrogen6x: config: allow boot to USB stick

Eric Nelson (24):
  nitrogen6x: implement board_cfb_skip() to disable text output
  nitrogen6x: configure SD2 pads for SDIO on USDHC2
  nitrogen6x: power-down miscellanous peripherals
  nitrogen6x: staticize board file
  nitrogen6x: Allow U-Boot to be silent on UART2
  nitrogen6x: prevent warnings about board_ehci* callbacks
  nitrogen6x: display: add qvga panel
  nitrogen6x: display: add support for LG-9.7 LVDS display
  nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800 displays
  nitrogen6x: display: add support for fusion 7 display
  nitrogen6x: display: add svga display (800x600)
  nitrogen6x: display: add Ampire 1024x600 panel
  nitrogen6x: display: add wvga-lvds panel
  nitrogen6x: display use I2C detect for HDMI
  nitrogen6x: config: add USB Mass Storage (ums) support
  nitrogen6x: config: add initrd_high
  nitrogen6x: config: expose SATA, then MMC over USB
  nitrogen6x: config: enable USB keyboard support
  nitrogen6x: config: add CONFIG_CMD_MEMTEST
  nitrogen6x: config: enable "i2c edid"
  nitrogen6x: config: disable logo
  nitrogen6x: config: configure usb_ether
  nitrogen6x: config: add gpio command
  nitrogen6x: config: enable Android fastboot

Kevin Mihelich (2):
  nitrogen6x: config: use FS_GENERIC load command
  nitrogen6x: config: enable EXT4 filesystem

Robert Winkler (1):
  nitrogen6x: display: add support lvds jeida screen

Troy Kisky (4):
  nitrogen6x: simplify board_mmc_getcd
  nitrogen6x: configure SGTL5000, CSI camera clock outputs
  nitrogen6x: phy: add 100 us delay after phy reset
  nitrogen6x: config: allow more bootargs parameters

 board/boundary/nitrogen6x/nitrogen6x.c | 298 +++++++++++++++++++++++++++++----
 include/configs/nitrogen6x.h           |  98 +++++++++--
 2 files changed, 347 insertions(+), 49 deletions(-)

-- 
1.9.1