[U-Boot] [PATCH v2 3/4] ls102xa: HYP/non-sec: support for ls102xa boards

[Xiubo Li]

Enable hypervisors utilizing the ARMv7 virtualization extension
on the LS1021A-QDS/TWR boards with the A7 core tile, we add the
required configuration variable.
Also we define the board specific smp_set_cpu_boot_addr() function
to set the start address for secondary cores in the LS1021A specific
manner.

Signed-off-by: Xiubo Li <Li.Xiubo at freescale.com>
---
 arch/arm/cpu/armv7/ls102xa/cpu.c                  | 15 +++++++++++++++
 arch/arm/include/asm/arch-ls102xa/config.h        |  2 ++
 arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h |  3 +++
 include/configs/ls1021aqds.h                      |  7 +++++++
 include/configs/ls1021atwr.h                      |  7 +++++++
 5 files changed, 34 insertions(+)

diff --git a/arch/arm/cpu/armv7/ls102xa/cpu.c b/arch/arm/cpu/armv7/ls102xa/cpu.c
index b7dde45..69d1801 100644
--- a/arch/arm/cpu/armv7/ls102xa/cpu.c
+++ b/arch/arm/cpu/armv7/ls102xa/cpu.c
@@ -101,3 +101,18 @@ int cpu_eth_init(bd_t *bis)
 
 	return 0;
 }
+
+#if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT)
+/* Setting the address at which secondary cores start from.*/
+void smp_set_core_boot_addr(unsigned long addr, int corenr)
+{
+	struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
+
+	/*
+	 * After setting the secondary cores start address,
+	 * just release them to boot.
+	 */
+	out_be32(&gur->scratchrw[0], addr);
+	out_be32(&gur->brrl, 0x2);
+}
+#endif
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index ed78c33..4856388 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -11,6 +11,8 @@
 
 #define OCRAM_BASE_ADDR				0x10000000
 #define OCRAM_SIZE				0x00020000
+#define OCRAM_BASE_S_ADDR			0x10010000
+#define OCRAM_S_SIZE				0x00010000
 
 #define CONFIG_SYS_IMMR				0x01000000
 
diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
index 7995fe2..0bac353 100644
--- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
+++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h
@@ -17,6 +17,9 @@
 #define SOC_VER_LS1021		0x11
 #define SOC_VER_LS1022		0x12
 
+#define CCSR_BRR_OFFSET		0xe4
+#define CCSR_SCRATCHRW1_OFFSET	0x200
+
 #define RCWSR0_SYS_PLL_RAT_SHIFT	25
 #define RCWSR0_SYS_PLL_RAT_MASK		0x1f
 #define RCWSR0_MEM_PLL_RAT_SHIFT	16
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 657e3b6..6976cfa 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -324,6 +324,13 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_CMD_IMLS
 
+#define CONFIG_ARMV7_NONSEC
+#define CONFIG_ARMV7_VIRT
+#define CONFIG_PEN_ADDR_BIG_ENDIAN
+#define CONFIG_SMP_PEN_ADDR		0x01ee0200
+#define CONFIG_TIMER_CLK_FREQ		12500000
+#define CONFIG_ARMV7_SECURE_BASE	OCRAM_BASE_S_ADDR
+
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 45b2272..655b39a 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -227,6 +227,13 @@
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_CMD_IMLS
 
+#define CONFIG_ARMV7_NONSEC
+#define CONFIG_ARMV7_VIRT
+#define CONFIG_PEN_ADDR_BIG_ENDIAN
+#define CONFIG_SMP_PEN_ADDR		0x01ee0200
+#define CONFIG_TIMER_CLK_FREQ		12500000
+#define CONFIG_ARMV7_SECURE_BASE	OCRAM_BASE_S_ADDR
+
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE		128
 
-- 
2.1.0.27.g96db324