[U-Boot] [PATCH v2 0/4] ls102xa: HYP/non-sec: for ls102xa.

[Xiubo Li]

Change for V2:
- All the registers are defined as a struct, here use it.
- Use CONFIG_PEN_ADDR_BIG_ENDIAN instead of CONFIG_SOC_BIG_ENDIAN.


Xiubo Li (4):
  ARM: HYP/non-sec: add the pen address byte reverting support.
  ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.
  ls102xa: HYP/non-sec: support for ls102xa boards
  ARM: ls102xa: allow all the peripheral access permissions as R/W.

 arch/arm/cpu/armv7/ls102xa/cpu.c                  |  16 +++
 arch/arm/cpu/armv7/nonsec_virt.S                  |   7 +-
 arch/arm/include/asm/arch-ls102xa/config.h        |   3 +
 arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h |   3 +
 arch/arm/include/asm/arch-ls102xa/ns_access.h     | 118 ++++++++++++++++++++++
 board/freescale/common/Makefile                   |   2 +
 board/freescale/common/ns_access.c                |  32 ++++++
 board/freescale/ls1021aqds/ls1021aqds.c           |  92 +++++++++++++++++
 board/freescale/ls1021atwr/ls1021atwr.c           |  91 +++++++++++++++++
 include/configs/ls1021aqds.h                      |   8 ++
 include/configs/ls1021atwr.h                      |   8 ++
 include/configs/sun7i.h                           |   1 +
 12 files changed, 379 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-ls102xa/ns_access.h
 create mode 100644 board/freescale/common/ns_access.c

-- 
2.1.0.27.g96db324