[U-Boot] [U-boot] [Patch v2 0/4] keystone2: ecc: add ddr3 error detection and correction support

[Ivan Khoronzhuk]

This series adds the DDR3 ECC support to enable ECC in the DDR3
EMIF controller for Keystone II devices.

Based on
"[U-boot] [Patch 0/5] keystone2: add network support for K2E SoC and EVM"
https://www.mail-archive.com/u-boot@lists.denx.de/msg148985.html

v2..v1:
	- nothing changed just rebased

Hao Zhang (1):
  ARM: keystone: cmd_ddr3: add ddr3 commands to test ddr

Ivan Khoronzhuk (1):
  dma: ti-edma3: introduce edma3 driver

Vitaly Andrianov (2):
  ARM: keystone: msmc: extend functionality of SES
  keystone2: ecc: add ddr3 error detection and correction support

 arch/arm/cpu/armv7/keystone/Makefile               |   2 +-
 arch/arm/cpu/armv7/keystone/cmd_ddr3.c             | 247 +++++++++++++
 arch/arm/cpu/armv7/keystone/ddr3.c                 | 244 +++++++++++++
 arch/arm/cpu/armv7/keystone/msmc.c                 |  26 ++
 arch/arm/include/asm/arch-keystone/ddr3.h          |   6 +
 arch/arm/include/asm/arch-keystone/hardware-k2hk.h |   4 +
 arch/arm/include/asm/arch-keystone/hardware.h      |  52 +++
 arch/arm/include/asm/arch-keystone/msmc.h          |  28 ++
 arch/arm/include/asm/ti-common/ti-edma3.h          | 121 +++++++
 board/ti/ks2_evm/board.c                           |   3 +
 board/ti/ks2_evm/ddr3_k2hk.c                       |  16 +
 drivers/dma/Makefile                               |   1 +
 drivers/dma/ti-edma3.c                             | 384 +++++++++++++++++++++
 include/configs/ks2_evm.h                          |   4 -
 14 files changed, 1133 insertions(+), 5 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/keystone/cmd_ddr3.c
 create mode 100644 arch/arm/include/asm/ti-common/ti-edma3.h
 create mode 100644 drivers/dma/ti-edma3.c

-- 
1.8.3.2