[U-Boot] [PATCH 5/9] ARM: sunxi: Add basic A23 support

Ian Campbell ijc at hellion.org.uk
Sat Oct 11 17:58:12 CEST 2014


On Tue, 2014-10-07 at 15:11 +0800, Chen-Yu Tsai wrote:
> The basic blocks of the A23 are similar to the A31 (sun6i). Re-use
> sun6i code for initial clock, gpio, and uart setup.

Do I take it that sun8i is also in the same position wrt DRAM bring up
code not existing yet and there therefore being no SPL yet?

> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> ---
>  arch/arm/Kconfig                        |  3 +++
>  arch/arm/cpu/armv7/sunxi/Makefile       |  2 ++
>  arch/arm/cpu/armv7/sunxi/board.c        |  3 ++-
>  arch/arm/cpu/armv7/sunxi/cpu_info.c     |  2 ++
>  arch/arm/include/asm/arch-sunxi/clock.h |  2 +-
>  board/sunxi/Kconfig                     |  9 ++++++++-
>  include/configs/sun8i.h                 | 23 +++++++++++++++++++++++
>  7 files changed, 41 insertions(+), 3 deletions(-)
>  create mode 100644 include/configs/sun8i.h
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index e3e7e78..cb691b2 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -450,6 +450,9 @@ config TARGET_SUN6I
>  config TARGET_SUN7I
>  	bool "Support sun7i"
>  
> +config TARGET_SUN8I
> +	bool "Support sun8i"
> +
>  config TARGET_SNOWBALL
>  	bool "Support snowball"
>  
> diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
> index 2a42dca..24f1dae 100644
> --- a/arch/arm/cpu/armv7/sunxi/Makefile
> +++ b/arch/arm/cpu/armv7/sunxi/Makefile
> @@ -12,10 +12,12 @@ obj-y	+= board.o
>  obj-y	+= clock.o
>  obj-y	+= pinmux.o
>  obj-$(CONFIG_SUN6I)	+= prcm.o
> +obj-$(CONFIG_SUN8I)	+= prcm.o
>  obj-$(CONFIG_SUN4I)	+= clock_sun4i.o
>  obj-$(CONFIG_SUN5I)	+= clock_sun4i.o
>  obj-$(CONFIG_SUN6I)	+= clock_sun6i.o
>  obj-$(CONFIG_SUN7I)	+= clock_sun4i.o
> +obj-$(CONFIG_SUN8I)	+= clock_sun6i.o
>  
>  ifndef CONFIG_SPL_BUILD
>  obj-y	+= cpu_info.o
> diff --git a/arch/arm/cpu/armv7/sunxi/board.c b/arch/arm/cpu/armv7/sunxi/board.c
> index 29d45b6..61c1ba9 100644
> --- a/arch/arm/cpu/armv7/sunxi/board.c
> +++ b/arch/arm/cpu/armv7/sunxi/board.c
> @@ -100,7 +100,8 @@ void reset_cpu(ulong addr)
>  /* do some early init */
>  void s_init(void)
>  {
> -#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || defined CONFIG_SUN6I)
> +#if !defined CONFIG_SPL_BUILD && (defined CONFIG_SUN7I || \
> +		defined CONFIG_SUN6I || defined CONFIG_SUN8I)

At some point we should refactor this to use a common Kconfig thing
(SUNXI_SMP etc) which the relevant targets select.

>  	/* Enable SMP mode for CPU0, by setting bit 6 of Auxiliary Ctl reg */
>  	asm volatile(
>  		"mrc p15, 0, r0, c1, c0, 1\n"
> diff --git a/arch/arm/cpu/armv7/sunxi/cpu_info.c b/arch/arm/cpu/armv7/sunxi/cpu_info.c
> index 40c4e13..4f2a09c 100644
> --- a/arch/arm/cpu/armv7/sunxi/cpu_info.c
> +++ b/arch/arm/cpu/armv7/sunxi/cpu_info.c
> @@ -27,6 +27,8 @@ int print_cpuinfo(void)
>  	puts("CPU:   Allwinner A31 (SUN6I)\n");
>  #elif defined CONFIG_SUN7I
>  	puts("CPU:   Allwinner A20 (SUN7I)\n");
> +#elif defined CONFIG_SUN8I
> +	puts("CPU:   Allwinner A23 (SUN8I)\n");
>  #else
>  #warning Please update cpu_info.c with correct CPU information
>  	puts("CPU:   SUNXI Family\n");
> diff --git a/arch/arm/include/asm/arch-sunxi/clock.h b/arch/arm/include/asm/arch-sunxi/clock.h
> index 8f5d860..012c2af 100644
> --- a/arch/arm/include/asm/arch-sunxi/clock.h
> +++ b/arch/arm/include/asm/arch-sunxi/clock.h
> @@ -15,7 +15,7 @@
>  #define CLK_GATE_CLOSE			0x0
>  
>  /* clock control module regs definition */
> -#ifdef CONFIG_SUN6I
> +#if defined(CONFIG_SUN6I) || defined(CONFIG_SUN8I)
>  #include <asm/arch/clock_sun6i.h>
>  #else
>  #include <asm/arch/clock_sun4i.h>
> diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
> index 05defac..16f6db4 100644
> --- a/board/sunxi/Kconfig
> +++ b/board/sunxi/Kconfig
> @@ -27,7 +27,14 @@ config SYS_CONFIG_NAME
>  
>  endif
>  
> -if TARGET_SUN4I || TARGET_SUN5I || TARGET_SUN6I || TARGET_SUN7I
> +if TARGET_SUN8I
> +
> +config SYS_CONFIG_NAME
> +	default "sun8i"
> +
> +endif
> +
> +if TARGET_SUN4I || TARGET_SUN5I || TARGET_SUN6I || TARGET_SUN7I || TARGET_SUN8I
>  
>  config SYS_CPU
>  	default "armv7"
> diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h
> new file mode 100644
> index 0000000..1c1a7cd
> --- /dev/null
> +++ b/include/configs/sun8i.h
> @@ -0,0 +1,23 @@
> +/*
> + * (C) Copyright 2014 Chen-Yu Tsai <wens at csie.org>
> + *
> + * Configuration settings for the Allwinner A23 (sun8i) CPU
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +
> +#ifndef __CONFIG_H
> +#define __CONFIG_H
> +
> +/*
> + * A23 specific configuration
> + */
> +#define CONFIG_SUN8I		/* sun8i SoC generation */
> +#define CONFIG_SYS_PROMPT	"sun8i# "
> +
> +/*
> + * Include common sunxi configuration where most the settings are
> + */
> +#include <configs/sunxi-common.h>
> +
> +#endif /* __CONFIG_H */




More information about the U-Boot mailing list