[U-Boot] [PATCH 1/5] imx: gpt: Add 24Mhz OSC clock source support for GPT

Ye.Li B37916 at freescale.com
Fri Oct 24 14:32:59 CEST 2014


Introduce a new configuration "CONFIG_MXC_GPT_HCLK". When it is set,
the GPT will use 24Mhz OSC as clock source. Otherwise, the GPT will
use 32Khz OSC as clock source.

Since only the GPT on iMX6 series provide the clock source option for
24Mhz OSC. For other series(MX5), if the configuration is set, the
perclk will be selected as clock source.

MX6Q/D Rev 1.0 and MX6SL can't use the 24Mhz OSC clock source option,
so select the perclk for them. For MX6SL, we will set the OSC 24Mhz to
perclk in CCM, so eventually the clock comes from OSC 24Mhz.

Signed-off-by: Ye.Li <B37916 at freescale.com>
---
 arch/arm/imx-common/timer.c |   76 +++++++++++++++++++++++++++++++++++++------
 1 files changed, 66 insertions(+), 10 deletions(-)

diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c
index c63f78f..f7e49bd 100644
--- a/arch/arm/imx-common/timer.c
+++ b/arch/arm/imx-common/timer.c
@@ -2,7 +2,7 @@
  * (C) Copyright 2007
  * Sascha Hauer, Pengutronix
  *
- * (C) Copyright 2009 Freescale Semiconductor, Inc.
+ * (C) Copyright 2009-2014 Freescale Semiconductor, Inc.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -12,6 +12,7 @@
 #include <div64.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
 
 /* General purpose timers registers */
 struct mxc_gpt {
@@ -26,23 +27,60 @@ static struct mxc_gpt *cur_gpt = (struct mxc_gpt *)GPT1_BASE_ADDR;
 
 /* General purpose timers bitfields */
 #define GPTCR_SWR		(1 << 15)	/* Software reset */
+#define GPTCR_24MEN	    (1 << 10)	/* Enable 24MHz clock input from crystal */
 #define GPTCR_FRR		(1 << 9)	/* Freerun / restart */
-#define GPTCR_CLKSOURCE_32	(4 << 6)	/* Clock source */
+#define GPTCR_CLKSOURCE_32	(4 << 6)	/* Clock source 32khz */
+#define GPTCR_CLKSOURCE_OSC	(5 << 6)	/* Clock source OSC */
+#define GPTCR_CLKSOURCE_PRE	(1 << 6)	/* Clock source PRECLK */
+#define GPTCR_CLKSOURCE_MASK (0x7 << 6)
 #define GPTCR_TEN		1		/* Timer enable */
 
+#define GPTPR_PRESCALER24M_SHIFT 12
+#define GPTPR_PRESCALER24M_MASK (0xF << GPTPR_PRESCALER24M_SHIFT)
+
 DECLARE_GLOBAL_DATA_PTR;
 
+static inline int gpt_has_clk_source_osc(void)
+{
+#if defined(CONFIG_MX6)
+	if (((is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+		&& (is_soc_rev(CHIP_REV_1_0) > 0))
+		|| is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO)
+		|| is_cpu_type(MXC_CPU_MX6SX))
+		return 1;
+
+	return 0;
+#else
+	return 0;
+#endif
+}
+
+static inline ulong gpt_get_clk(void)
+{
+#ifdef CONFIG_MXC_GPT_HCLK
+	if (gpt_has_clk_source_osc())
+		return MXC_HCLK >> 3;
+	else
+		return mxc_get_clock(MXC_IPG_PERCLK);
+#else
+	return MXC_CLK32;
+#endif
+}
 static inline unsigned long long tick_to_time(unsigned long long tick)
 {
+	ulong gpt_clk = gpt_get_clk();
+
 	tick *= CONFIG_SYS_HZ;
-	do_div(tick, MXC_CLK32);
+	do_div(tick, gpt_clk);
 
 	return tick;
 }
 
 static inline unsigned long long us_to_tick(unsigned long long usec)
 {
-	usec = usec * MXC_CLK32 + 999999;
+	ulong gpt_clk = gpt_get_clk();
+
+	usec = usec * gpt_clk + 999999;
 	do_div(usec, 1000000);
 
 	return usec;
@@ -59,11 +97,29 @@ int timer_init(void)
 	for (i = 0; i < 100; i++)
 		__raw_writel(0, &cur_gpt->control);
 
-	__raw_writel(0, &cur_gpt->prescaler); /* 32Khz */
-
-	/* Freerun Mode, PERCLK1 input */
 	i = __raw_readl(&cur_gpt->control);
-	__raw_writel(i | GPTCR_CLKSOURCE_32 | GPTCR_TEN, &cur_gpt->control);
+	i &= ~GPTCR_CLKSOURCE_MASK;
+
+#ifdef CONFIG_MXC_GPT_HCLK
+	if (gpt_has_clk_source_osc()) {
+		i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN;
+
+		/* For DL/S, SX, they has 24M OSC Enable bit and need to set prescaler */
+		if (is_cpu_type(MXC_CPU_MX6DL) || is_cpu_type(MXC_CPU_MX6SOLO)
+			|| is_cpu_type(MXC_CPU_MX6SX)) {
+			i |= GPTCR_24MEN;
+
+			/* Produce 3Mhz clock */
+			__raw_writel((7 << GPTPR_PRESCALER24M_SHIFT), &cur_gpt->prescaler);
+		}
+	} else {
+		i |= GPTCR_CLKSOURCE_PRE | GPTCR_TEN;
+	}
+#else
+	__raw_writel(0, &cur_gpt->prescaler); /* 32Khz */
+	i |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
+#endif
+	__raw_writel(i, &cur_gpt->control);
 
 	gd->arch.tbl = __raw_readl(&cur_gpt->counter);
 	gd->arch.tbu = 0;
@@ -86,7 +142,7 @@ ulong get_timer_masked(void)
 {
 	/*
 	 * get_ticks() returns a long long (64 bit), it wraps in
-	 * 2^64 / MXC_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
+	 * 2^64 / GPT_CLK = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
 	 * 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
 	 * 5 * 10^6 days - long enough.
 	 */
@@ -117,5 +173,5 @@ void __udelay(unsigned long usec)
  */
 ulong get_tbclk(void)
 {
-	return MXC_CLK32;
+	return gpt_get_clk();
 }
-- 
1.7.4.1



More information about the U-Boot mailing list