[U-Boot] [PATCH v2] arm: socfpga: Add I2C support to SoCFPGA

[Stefan Roese]

This patch adds I2C support for the SoCFPGA. Using the designware I2C
controller driver. It supports all 4 I2C busses on the SoCFPGA.

The designware I2C driver has now been converted to the
CONFIG_SYS_I2C framework. So lets enable it on SoCFPGA.

Tested on SoCrates.

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Marek Vasut <marex at denx.de>
Cc: Chin Liang See <clsee at altera.com>
Cc: Dinh Nguyen <dinguyen at altera.com>
Cc: Vince Bridgers <vbridger at altera.com>
Cc: Pavel Machek <pavel at denx.de>
Cc: Heiko Schocher <hs at denx.de>
---
v2:
- The designware I2C driver now has been converted to the 
  CONFIG_SYS_I2C framework. Use the correct defines to enable it.

 include/configs/socfpga_common.h | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 83a1bcd..f7b314d 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -141,6 +141,33 @@
 #define CONFIG_SYS_MMC_MAX_BLK_COUNT	256	/* FIXME -- SPL only? */
 #endif
 
+ /*
+ * I2C support
+ */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DW
+#define CONFIG_SYS_I2C_BUS_MAX		4
+#define CONFIG_SYS_I2C_BASE		SOCFPGA_I2C0_ADDRESS
+#define CONFIG_SYS_I2C_BASE1		SOCFPGA_I2C1_ADDRESS
+#define CONFIG_SYS_I2C_BASE2		SOCFPGA_I2C2_ADDRESS
+#define CONFIG_SYS_I2C_BASE3		SOCFPGA_I2C3_ADDRESS
+/* Using standard mode which the speed up to 100Kb/s */
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SPEED1		100000
+#define CONFIG_SYS_I2C_SPEED2		100000
+#define CONFIG_SYS_I2C_SPEED3		100000
+/* Address of device when used as slave */
+#define CONFIG_SYS_I2C_SLAVE		0x02
+#define CONFIG_SYS_I2C_SLAVE1		0x02
+#define CONFIG_SYS_I2C_SLAVE2		0x02
+#define CONFIG_SYS_I2C_SLAVE3		0x02
+#ifndef __ASSEMBLY__
+/* Clock supplied to I2C controller in unit of MHz */
+unsigned int cm_get_l4_sp_clk_hz(void);
+#define IC_CLK				(cm_get_l4_sp_clk_hz() / 1000000)
+#endif
+#define CONFIG_CMD_I2C
+
 /*
  * Serial Driver
  */
-- 
2.1.3