[U-Boot] [PATCH] km_kirkwood: remove KM_ENV_BUS and use CONFIG_I2C_ENV_EEPROM_BUS

[Prafulla Wadaskar]

> -----Original Message-----
> From: Valentin Longchamp
> [mailto:valentin.longchamp at keymile.com]
> Sent: 14 October 2014 14:49
> To: u-boot at lists.denx.de; Prafulla Wadaskar
> Cc: Holger Brunck; Valentin Longchamp
> Subject: [PATCH] km_kirkwood: remove KM_ENV_BUS and use
> CONFIG_I2C_ENV_EEPROM_BUS
> 
> KM_ENV_BUS was used for nothing else than an direct
> assignment to
> CONFIG_I2C_ENV_EEPROM_BUS. To avoid this, directly use
> CONFIG_I2C_ENV_EEPROM_BUS instead.
> 
> Signed-off-by: Valentin Longchamp
> <valentin.longchamp at keymile.com>
> 
> ---
> 
>  include/configs/km/km_arm.h   | 2 +-
>  include/configs/km_kirkwood.h | 4 ----
>  2 files changed, 1 insertion(+), 5 deletions(-)
> 
> diff --git a/include/configs/km/km_arm.h
> b/include/configs/km/km_arm.h
> index d31e674..04cddb1 100644
> --- a/include/configs/km/km_arm.h
> +++ b/include/configs/km/km_arm.h
> @@ -244,7 +244,7 @@ int get_scl(void);
>  #define CONFIG_SYS_EEPROM_WREN
>  #define CONFIG_ENV_OFFSET		0x0 /* no bracets! */
>  #define CONFIG_ENV_SIZE			(0x2000 -
> CONFIG_ENV_OFFSET)
> -#define CONFIG_I2C_ENV_EEPROM_BUS	KM_ENV_BUS
> +#define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port
> 5) */
>  #define CONFIG_ENV_OFFSET_REDUND	0x2000 /* no bracets!
> */
>  #define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
>  #endif
> diff --git a/include/configs/km_kirkwood.h
> b/include/configs/km_kirkwood.h
> index dc26155..a445aaf 100644
> --- a/include/configs/km_kirkwood.h
> +++ b/include/configs/km_kirkwood.h
> @@ -116,10 +116,6 @@
>  /* include common defines/options for all arm based
> Keymile boards */
>  #include "km/km_arm.h"
> 
> -#ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR
> -#define KM_ENV_BUS	5	/* I2C2 (Mux-Port 5)*/
> -#endif
> -
>  #if defined(CONFIG_KM_PIGGY4_88E6352)
>  /*
>   * Some keymile boards like mgcoge5un & nusa1 have
> their PIGGY4 connected via
> --

Applied to u-boot-marvell.git master branch

Regards...
Prafulla . . .