[U-Boot] [PATCH 3/3] ARM: sunxi: Fix reset command on sun6i/sun8i
Chen-Yu Tsai
wens at csie.org
Sun Oct 12 04:40:52 CEST 2014
On Sat, Oct 11, 2014 at 11:33 PM, Ian Campbell <ijc at hellion.org.uk> wrote:
> On Sat, 2014-10-04 at 20:37 +0800, Chen-Yu Tsai wrote:
>> +#else /* CONFIG_SUN6I || CONFIG_SUN8I || .. */
>> + static const struct sunxi_wdog *wdog =
>> + ((struct sunxi_timer_reg *)SUNXI_TIMER_BASE)->wdog;
>> +
>> + /* Set the watchdog for its shortest interval (.5s) and wait */
>> + writel(WDT_CFG_RESET, &wdog->cfg);
>> + writel(WDT_MODE_EN, &wdog->mode);
>> + writel(WDT_CTRL_KEY | WDT_CTRL_RESTART, &wdog->ctl);
>
> That's annoyingly close to the 4/5/7i version, but not quite close
> enough to allow any meaningful sharing :-/
I suppose it is possible to share using clrsetbits...
>> + while (1) {
>> + /* sun5i sometimes gets stuck without this */
>
> Is this not therefore unnecessary on 6i/8i?
The kernel restart driver uses this.
But Allwinner's original code does not.
ChenYu
>> + writel(WDT_MODE_EN, &wdog->mode);
>> + }
>> +#endif
>> }
>>
>> /* do some early init */
>> diff --git a/arch/arm/include/asm/arch-sunxi/watchdog.h b/arch/arm/include/asm/arch-sunxi/watchdog.h
>> index 5b755e3..ccc8fa3 100644
>> --- a/arch/arm/include/asm/arch-sunxi/watchdog.h
>> +++ b/arch/arm/include/asm/arch-sunxi/watchdog.h
>> @@ -12,6 +12,9 @@
>>
>> #define WDT_CTRL_RESTART (0x1 << 0)
>> #define WDT_CTRL_KEY (0x0a57 << 1)
>> +
>> +#if defined(CONFIG_SUN4I) || defined(CONFIG_SUN5I) || defined(CONFIG_SUN7I)
>> +
>> #define WDT_MODE_EN (0x1 << 0)
>> #define WDT_MODE_RESET_EN (0x1 << 1)
>>
>> @@ -21,4 +24,21 @@ struct sunxi_wdog {
>> u32 res[2];
>> };
>>
>> +#else
>> +
>> +#define WDT_CFG_RESET (0x1)
>> +#define WDT_MODE_EN (0x1)
>> +
>> +struct sunxi_wdog {
>> + u32 irq_en; /* 0x00 */
>> + u32 irq_sta; /* 0x04 */
>> + u32 res1[2];
>> + u32 ctl; /* 0x10 */
>> + u32 cfg; /* 0x14 */
>> + u32 mode; /* 0x18 */
>> + u32 res2;
>> +};
>> +
>> +#endif
>> +
>> #endif /* _SUNXI_WATCHDOG_H_ */
>
>
More information about the U-Boot
mailing list