[U-Boot] u-boot, fsl_espi.c driver
York Sun
yorksun at freescale.com
Thu Oct 9 18:25:40 CEST 2014
Dear Joakim,
Thanks for raising a concern.
It's not fair to blame the last person who submitted a patch. We are all working
to make it better as an opensource comminuty. You have done a good job to hack
it to work. Would it be nicer if you can submit this or improved patch to u-boot
community for further review and testing, after putting informing commit
message? The mailing list address is CC'ed.
York
On 10/09/2014 09:14 AM, Joakim Tjernlund wrote:
> Guys, I noticed you have added to the fsl eSPI driver and you work for
> Freescale.
> This driver is broken beyond words, just look what I had to hack to load a
> FPGA over SPI(below).
> I hope you can take the time to fix the driver.
>
> From e73b8bd36b42e39ee9e22b48deca3a54fbffe4ac Mon Sep 17 00:00:00 2001
> From: Joakim Tjernlund <Joakim.Tjernlund at transmode.se>
> Date: Mon, 3 Mar 2014 16:30:35 +0100
> Subject: [PATCH] Fast fixes to make eSPI driver work.
>
> The whole driver stinks, needs to be rewritten.
> ---
> drivers/spi/fsl_espi.c | 19 +++++++++++--------
> 1 file changed, 11 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c
> index ae0fe58..f5a8fcc 100644
> --- a/drivers/spi/fsl_espi.c
> +++ b/drivers/spi/fsl_espi.c
> @@ -45,6 +45,8 @@ struct fsl_spi_slave {
>
> #define ESPI_COM_CS(x) ((x) << 30)
> #define ESPI_COM_TRANLEN(x) ((x) << 0)
> +#define ESPI_COM_TO (1 << (31 - 4))
> +
>
> #define ESPI_CSMODE_CI_INACTIVEHIGH (1 << 31)
> #define ESPI_CSMODE_CP_BEGIN_EDGCLK (1 << 30)
> @@ -165,8 +167,9 @@ int spi_claim_bus(struct spi_slave *slave)
> | ESPI_CSMODE_CI_INACTIVEHIGH);
> /* Character bit order: msb first */
> - out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
> - | ESPI_CSMODE_REV_MSB_FIRST);
> + if (!(mode & SPI_LSB_FIRST))
> + out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
> + | ESPI_CSMODE_REV_MSB_FIRST);
>
> /* Character length in bits, between 0x3~0xf, i.e. 4bits~16bits */
> out_be32(&espi->csmode[cs], in_be32(&espi->csmode[cs])
> @@ -302,14 +305,15 @@ int spi_xfer(struct spi_slave *slave, unsigned int
> bitlen, const void *data_out,
> *(uint *)data_out, data_out, *(uint *)data_in, data_in,
> len);
>
> num_chunks = DIV_ROUND_UP(data_len, max_tran_len);
> + dout = buffer;
> while (num_chunks--) {
> if (data_in)
> din = buffer + rx_offset;
> - dout = buffer;
> tran_len = min(data_len , max_tran_len);
> num_blks = DIV_ROUND_UP(tran_len + cmd_len, 4);
> num_bytes = (tran_len + cmd_len) % 4;
> fsl->data_len = tran_len + cmd_len;
> + data_len -= tran_len;
> spi_cs_activate(slave);
>
> /* Clear all eSPI events */
> @@ -320,12 +324,11 @@ int spi_xfer(struct spi_slave *slave, unsigned int
> bitlen, const void *data_out,
> if (event & ESPI_EV_TNF) {
> fsl_espi_tx(fsl, dout);
> /* Set up the next iteration */
> - if (len > 4) {
> - len -= 4;
> - dout += 4;
> - }
> + len -= 4;
> + dout += 4;
> }
>
> + num_blks--;
> event = in_be32(&espi->event);
> if (event & ESPI_EV_RNE) {
> rf_cnt = ((event & ESPI_EV_RFCNT_MASK)
> @@ -338,7 +341,6 @@ int spi_xfer(struct spi_slave *slave, unsigned int
> bitlen, const void *data_out,
> continue;
> if (fsl_espi_rx(fsl, din, rx_bytes)
> == rx_bytes) {
> - num_blks--;
> if (din)
> din = (unsigned char *)din
> + rx_bytes;
> @@ -374,6 +376,7 @@ void spi_cs_activate(struct spi_slave *slave)
>
> com &= ~(ESPI_COM_CS(0x3) | ESPI_COM_TRANLEN(0xFFFF));
> com |= ESPI_COM_CS(slave->cs);
> + com |= ESPI_COM_TO;
> com |= ESPI_COM_TRANLEN(data_len - 1);
> out_be32(&espi->com, com);
> }
>
More information about the U-Boot
mailing list