[U-Boot] [PATCH v2 6/8] dm: serial: use Driver Model for UniPhier serial driver

Masahiro Yamada yamada.m at jp.panasonic.com
Thu Oct 23 15:26:10 CEST 2014


This commit converts UniPhier on-chip serial driver to driver model.

Since UniPhier SoCs do not have Device Tree support, some board files
should be added under arch/arm/cpu/armv7/uniphier/ph1-*/ directories.
(Device Tree support for UniPhier platform is still under way.)

Now the base address and master clock frequency are passed from
platform data, so CONFIG_SYS_UNIPHIER_SERIAL_BASE* and
CONFIG_SYS_UNIPHIER_UART_CLK should be removed.

Tested on UniPhier PH1-LD4 ref board.

Signed-off-by: Masahiro Yamada <yamada.m at jp.panasonic.com>
Acked-by: Simon Glass <sjg at chromium.org>
---

Changes in v2: None

 arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile      |   1 +
 arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c  |  15 ++
 arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile     |   1 +
 arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c |  15 ++
 arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile     |   1 +
 arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c |  15 ++
 arch/arm/include/asm/arch-uniphier/platdevice.h   |  24 +++
 configs/ph1_ld4_defconfig                         |   2 +
 configs/ph1_pro4_defconfig                        |   2 +
 configs/ph1_sld8_defconfig                        |   2 +
 drivers/serial/serial_uniphier.c                  | 199 ++++++++--------------
 include/configs/ph1_ld4.h                         |   2 -
 include/configs/ph1_pro4.h                        |   2 -
 include/configs/ph1_sld8.h                        |   2 -
 include/configs/uniphier-common.h                 |   7 +-
 include/dm/platform_data/serial-uniphier.h        |  18 ++
 16 files changed, 172 insertions(+), 136 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c
 create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
 create mode 100644 arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c
 create mode 100644 arch/arm/include/asm/arch-uniphier/platdevice.h
 create mode 100644 include/dm/platform_data/serial-uniphier.h

diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
index b385e19..781b511 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
+obj-y += platdevice.o
 obj-y += boot-mode.o
 obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \
 		sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c
new file mode 100644
index 0000000..0047223
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/ph1-ld4/platdevice.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m at jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/platdevice.h>
+
+#define UART_MASTER_CLK		36864000
+
+SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
+SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
+SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
+SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
index 712afd1..e11f4f6 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
+obj-y += platdevice.o
 obj-y += boot-mode.o
 obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o sbc_init.o \
 				sg_init.o pll_init.o clkrst_init.o pinctrl.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
new file mode 100644
index 0000000..6da921e
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/ph1-pro4/platdevice.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m at jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/platdevice.h>
+
+#define UART_MASTER_CLK		73728000
+
+SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
+SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
+SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
+SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
index b385e19..781b511 100644
--- a/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/Makefile
@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
+obj-y += platdevice.o
 obj-y += boot-mode.o
 obj-$(CONFIG_BOARD_POSTCLK_INIT) += board_postclk_init.o bcu_init.o \
 		sbc_init.o sg_init.o pll_init.o clkrst_init.o pinctrl.o
diff --git a/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c
new file mode 100644
index 0000000..59d054a
--- /dev/null
+++ b/arch/arm/cpu/armv7/uniphier/ph1-sld8/platdevice.c
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m at jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/platdevice.h>
+
+#define UART_MASTER_CLK		80000000
+
+SERIAL_DEVICE(0, 0x54006800, UART_MASTER_CLK)
+SERIAL_DEVICE(1, 0x54006900, UART_MASTER_CLK)
+SERIAL_DEVICE(2, 0x54006a00, UART_MASTER_CLK)
+SERIAL_DEVICE(3, 0x54006b00, UART_MASTER_CLK)
diff --git a/arch/arm/include/asm/arch-uniphier/platdevice.h b/arch/arm/include/asm/arch-uniphier/platdevice.h
new file mode 100644
index 0000000..cdf7d13
--- /dev/null
+++ b/arch/arm/include/asm/arch-uniphier/platdevice.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m at jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef ARCH_PLATDEVICE_H
+#define ARCH_PLATDEVICE_H
+
+#include <dm/platdata.h>
+#include <dm/platform_data/serial-uniphier.h>
+
+#define SERIAL_DEVICE(n, ba, clk)					\
+static struct uniphier_serial_platform_data serial_device##n = {	\
+	.base = ba,							\
+	.uartclk = clk							\
+};									\
+U_BOOT_DEVICE(serial##n) = {						\
+	.name = DRIVER_NAME,						\
+	.platdata = &serial_device##n					\
+};
+
+#endif /* ARCH_PLATDEVICE_H */
diff --git a/configs/ph1_ld4_defconfig b/configs/ph1_ld4_defconfig
index 53f3126..c8404f8 100644
--- a/configs/ph1_ld4_defconfig
+++ b/configs/ph1_ld4_defconfig
@@ -2,7 +2,9 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_UNIPHIER=y
 +S:CONFIG_MACH_PH1_LD4=y
+CONFIG_DM=y
 CONFIG_NAND_DENALI=y
 CONFIG_SYS_NAND_DENALI_64BIT=y
 CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
+CONFIG_DM_SERIAL=y
 S:CONFIG_SPL_NAND_DENALI=y
diff --git a/configs/ph1_pro4_defconfig b/configs/ph1_pro4_defconfig
index 209466e..5c051e3 100644
--- a/configs/ph1_pro4_defconfig
+++ b/configs/ph1_pro4_defconfig
@@ -2,7 +2,9 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_UNIPHIER=y
 +S:CONFIG_MACH_PH1_PRO4=y
+CONFIG_DM=y
 CONFIG_NAND_DENALI=y
 CONFIG_SYS_NAND_DENALI_64BIT=y
 CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
+CONFIG_DM_SERIAL=y
 S:CONFIG_SPL_NAND_DENALI=y
diff --git a/configs/ph1_sld8_defconfig b/configs/ph1_sld8_defconfig
index 658977b..2c636e6 100644
--- a/configs/ph1_sld8_defconfig
+++ b/configs/ph1_sld8_defconfig
@@ -2,7 +2,9 @@ CONFIG_SPL=y
 +S:CONFIG_ARM=y
 +S:CONFIG_ARCH_UNIPHIER=y
 +S:CONFIG_MACH_PH1_SLD8=y
+CONFIG_DM=y
 CONFIG_NAND_DENALI=y
 CONFIG_SYS_NAND_DENALI_64BIT=y
 CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES=8
+CONFIG_DM_SERIAL=y
 S:CONFIG_SPL_NAND_DENALI=y
diff --git a/drivers/serial/serial_uniphier.c b/drivers/serial/serial_uniphier.c
index f8c9d92..9114b3e 100644
--- a/drivers/serial/serial_uniphier.c
+++ b/drivers/serial/serial_uniphier.c
@@ -2,14 +2,14 @@
  * Copyright (C) 2012-2014 Panasonic Corporation
  *   Author: Masahiro Yamada <yamada.m at jp.panasonic.com>
  *
- * Based on serial_ns16550.c
- * (C) Copyright 2000
- * Rob Taylor, Flying Pig Systems. robt at flyingpig.com.
- *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <dm/device.h>
+#include <dm/platform_data/serial-uniphier.h>
 #include <serial.h>
 
 #define UART_REG(x)					\
@@ -48,157 +48,104 @@ struct uniphier_serial {
 #define UART_LSR_DR	0x01		/* Data ready */
 #define UART_LSR_THRE	0x20		/* Xmit holding register empty */
 
-DECLARE_GLOBAL_DATA_PTR;
+struct uniphier_serial_private_data {
+	struct uniphier_serial __iomem *membase;
+};
+
+#define uniphier_serial_port(dev)	\
+	((struct uniphier_serial_private_data *)dev_get_priv(dev))->membase
 
-static void uniphier_serial_init(struct uniphier_serial *port)
+int uniphier_serial_setbrg(struct udevice *dev, int baudrate)
 {
+	struct uniphier_serial_platform_data *plat = dev_get_platdata(dev);
+	struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
 	const unsigned int mode_x_div = 16;
 	unsigned int divisor;
 
 	writeb(UART_LCR_WLS_8, &port->lcr);
 
-	divisor = DIV_ROUND_CLOSEST(CONFIG_SYS_UNIPHIER_UART_CLK,
-						mode_x_div * gd->baudrate);
+	divisor = DIV_ROUND_CLOSEST(plat->uartclk, mode_x_div * baudrate);
 
 	writew(divisor, &port->dlr);
-}
 
-static void uniphier_serial_setbrg(struct uniphier_serial *port)
-{
-	uniphier_serial_init(port);
+	return 0;
 }
 
-static int uniphier_serial_tstc(struct uniphier_serial *port)
+static int uniphier_serial_getc(struct udevice *dev)
 {
-	return (readb(&port->lsr) & UART_LSR_DR) != 0;
-}
+	struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
 
-static int uniphier_serial_getc(struct uniphier_serial *port)
-{
-	while (!uniphier_serial_tstc(port))
-		;
+	if (!(readb(&port->lsr) & UART_LSR_DR))
+		return -EAGAIN;
 
 	return readb(&port->rbr);
 }
 
-static void uniphier_serial_putc(struct uniphier_serial *port, const char c)
+static int uniphier_serial_putc(struct udevice *dev, const char c)
 {
-	if (c == '\n')
-		uniphier_serial_putc(port, '\r');
+	struct uniphier_serial __iomem *port = uniphier_serial_port(dev);
 
-	while (!(readb(&port->lsr) & UART_LSR_THRE))
-		;
+	if (!(readb(&port->lsr) & UART_LSR_THRE))
+		return -EAGAIN;
 
 	writeb(c, &port->thr);
+
+	return 0;
 }
 
-static struct uniphier_serial *serial_ports[4] = {
-#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE0
-	(struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE0,
-#else
-	NULL,
-#endif
-#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE1
-	(struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE1,
-#else
-	NULL,
-#endif
-#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE2
-	(struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE2,
-#else
-	NULL,
-#endif
-#ifdef CONFIG_SYS_UNIPHIER_SERIAL_BASE3
-	(struct uniphier_serial *)CONFIG_SYS_UNIPHIER_SERIAL_BASE3,
-#else
-	NULL,
-#endif
-};
+int uniphier_serial_probe(struct udevice *dev)
+{
+	struct uniphier_serial_private_data *priv = dev_get_priv(dev);
+	struct uniphier_serial_platform_data *plat = dev_get_platdata(dev);
 
-/* Multi serial device functions */
-#define DECLARE_ESERIAL_FUNCTIONS(port) \
-	static int  eserial##port##_init(void) \
-	{ \
-		uniphier_serial_init(serial_ports[port]); \
-		return 0 ; \
-	} \
-	static void eserial##port##_setbrg(void) \
-	{ \
-		uniphier_serial_setbrg(serial_ports[port]); \
-	} \
-	static int  eserial##port##_getc(void) \
-	{ \
-		return uniphier_serial_getc(serial_ports[port]); \
-	} \
-	static int  eserial##port##_tstc(void) \
-	{ \
-		return uniphier_serial_tstc(serial_ports[port]); \
-	} \
-	static void eserial##port##_putc(const char c) \
-	{ \
-		uniphier_serial_putc(serial_ports[port], c); \
-	}
-
-/* Serial device descriptor */
-#define INIT_ESERIAL_STRUCTURE(port, __name) {	\
-	.name	= __name,			\
-	.start	= eserial##port##_init,		\
-	.stop	= NULL,				\
-	.setbrg	= eserial##port##_setbrg,	\
-	.getc	= eserial##port##_getc,		\
-	.tstc	= eserial##port##_tstc,		\
-	.putc	= eserial##port##_putc,		\
-	.puts	= default_serial_puts,		\
-}
+	priv->membase = map_sysmem(plat->base, sizeof(struct uniphier_serial));
 
-#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0)
-DECLARE_ESERIAL_FUNCTIONS(0);
-struct serial_device uniphier_serial0_device =
-	INIT_ESERIAL_STRUCTURE(0, "ttyS0");
-#endif
-#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1)
-DECLARE_ESERIAL_FUNCTIONS(1);
-struct serial_device uniphier_serial1_device =
-	INIT_ESERIAL_STRUCTURE(1, "ttyS1");
-#endif
-#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2)
-DECLARE_ESERIAL_FUNCTIONS(2);
-struct serial_device uniphier_serial2_device =
-	INIT_ESERIAL_STRUCTURE(2, "ttyS2");
-#endif
-#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3)
-DECLARE_ESERIAL_FUNCTIONS(3);
-struct serial_device uniphier_serial3_device =
-	INIT_ESERIAL_STRUCTURE(3, "ttyS3");
-#endif
+	if (!priv->membase)
+		return -ENOMEM;
 
-__weak struct serial_device *default_serial_console(void)
+	return 0;
+}
+
+int uniphier_serial_remove(struct udevice *dev)
 {
-#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0)
-	return &uniphier_serial0_device;
-#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1)
-	return &uniphier_serial1_device;
-#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2)
-	return &uniphier_serial2_device;
-#elif defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3)
-	return &uniphier_serial3_device;
-#else
-#error "No uniphier serial ports configured."
-#endif
+	unmap_sysmem(uniphier_serial_port(dev));
+
+	return 0;
 }
 
-void uniphier_serial_initialize(void)
+#ifdef CONFIG_OF_CONTROL
+static const struct udevice_id uniphier_uart_of_match = {
+	{ .compatible = "panasonic,uniphier-uart"},
+	{},
+};
+
+static int uniphier_serial_ofdata_to_platdata(struct udevice *dev)
 {
-#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE0)
-	serial_register(&uniphier_serial0_device);
-#endif
-#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE1)
-	serial_register(&uniphier_serial1_device);
-#endif
-#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE2)
-	serial_register(&uniphier_serial2_device);
-#endif
-#if defined(CONFIG_SYS_UNIPHIER_SERIAL_BASE3)
-	serial_register(&uniphier_serial3_device);
-#endif
+	/*
+	 * TODO: Masahiro Yamada (yamada.m at jp.panasonic.com)
+	 *
+	 * Implement conversion code from DTB to platform data
+	 * when supporting CONFIG_OF_CONTROL on UniPhir platform.
+	 */
 }
+#endif
+
+static const struct dm_serial_ops uniphier_serial_ops = {
+	.setbrg = uniphier_serial_setbrg,
+	.getc = uniphier_serial_getc,
+	.putc = uniphier_serial_putc,
+};
+
+U_BOOT_DRIVER(uniphier_serial) = {
+	.name = DRIVER_NAME,
+	.id = UCLASS_SERIAL,
+	.of_match = of_match_ptr(uniphier_uart_of_match),
+	.ofdata_to_platdata = of_match_ptr(uniphier_serial_ofdata_to_platdata),
+	.probe = uniphier_serial_probe,
+	.remove = uniphier_serial_remove,
+	.priv_auto_alloc_size = sizeof(struct uniphier_serial_private_data),
+	.platdata_auto_alloc_size =
+				sizeof(struct uniphier_serial_platform_data),
+	.ops = &uniphier_serial_ops,
+	.flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/include/configs/ph1_ld4.h b/include/configs/ph1_ld4.h
index a28d7b5..a546865 100644
--- a/include/configs/ph1_ld4.h
+++ b/include/configs/ph1_ld4.h
@@ -34,8 +34,6 @@
 #define CONFIG_SYS_NS16550_SERIAL
 #endif
 
-#define CONFIG_SYS_UNIPHIER_UART_CLK    36864000
-
 #define CONFIG_SMC911X
 
 #define CONFIG_DDR_NUM_CH0 1
diff --git a/include/configs/ph1_pro4.h b/include/configs/ph1_pro4.h
index b79967f..85c14ba 100644
--- a/include/configs/ph1_pro4.h
+++ b/include/configs/ph1_pro4.h
@@ -34,8 +34,6 @@
 #define CONFIG_SYS_NS16550_SERIAL
 #endif
 
-#define CONFIG_SYS_UNIPHIER_UART_CLK    73728000
-
 #define CONFIG_SMC911X
 
 #define CONFIG_DDR_NUM_CH0 2
diff --git a/include/configs/ph1_sld8.h b/include/configs/ph1_sld8.h
index 9d391f1..41e2299 100644
--- a/include/configs/ph1_sld8.h
+++ b/include/configs/ph1_sld8.h
@@ -34,8 +34,6 @@
 #define CONFIG_SYS_NS16550_SERIAL
 #endif
 
-#define CONFIG_SYS_UNIPHIER_UART_CLK    80000000
-
 #define CONFIG_SMC911X
 
 #define CONFIG_DDR_NUM_CH0 1
diff --git a/include/configs/uniphier-common.h b/include/configs/uniphier-common.h
index 18fe277..b18ae6d 100644
--- a/include/configs/uniphier-common.h
+++ b/include/configs/uniphier-common.h
@@ -33,18 +33,17 @@ are defined. Select only one of them."
 # define CONFIG_SUPPORT_CARD_UART_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00200000)
 #endif
 
+#ifdef CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_COM1		CONFIG_SUPPORT_CARD_UART_BASE
 #define CONFIG_SYS_NS16550_CLK		12288000
 #define CONFIG_SYS_NS16550_REG_SIZE	-2
+#endif
 
 #define CONFIG_SMC911X_BASE		CONFIG_SUPPORT_CARD_ETHER_BASE
 #define CONFIG_SMC911X_32_BIT
 
-#define CONFIG_SYS_UNIPHIER_SERIAL_BASE0 0x54006800
-#define CONFIG_SYS_UNIPHIER_SERIAL_BASE1 0x54006900
-#define CONFIG_SYS_UNIPHIER_SERIAL_BASE2 0x54006a00
-#define CONFIG_SYS_UNIPHIER_SERIAL_BASE3 0x54006b00
+#define CONFIG_SYS_MALLOC_F_LEN  0x7000
 
 /*-----------------------------------------------------------------------
  * MMU and Cache Setting
diff --git a/include/dm/platform_data/serial-uniphier.h b/include/dm/platform_data/serial-uniphier.h
new file mode 100644
index 0000000..52343e3
--- /dev/null
+++ b/include/dm/platform_data/serial-uniphier.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2014 Panasonic Corporation
+ *   Author: Masahiro Yamada <yamada.m at jp.panasonic.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __PLAT_UNIPHIER_SERIAL_H
+#define __PLAT_UNIPHIER_SERIAL_H
+
+#define DRIVER_NAME	"uniphier-uart"
+
+struct uniphier_serial_platform_data {
+	unsigned long base;
+	unsigned int uartclk;
+};
+
+#endif /* __PLAT_UNIPHIER_SERIAL_H */
-- 
1.9.1



More information about the U-Boot mailing list