[U-Boot] [PATCH v3 0/5] ls102xa: HYP/non-sec: for ls102xa.

Xiubo Li Li.Xiubo at freescale.com
Mon Oct 20 11:00:45 CEST 2014


Change for V3:
- Fix the language in commit message.

Change for V2:
- All the registers are defined as a struct, here use it.
- Use CONFIG_PEN_ADDR_BIG_ENDIAN instead of CONFIG_SOC_BIG_ENDIAN.


Xiubo Li (5):
  ARM: HYP/non-sec: add the pen address BE mode support.
  ARM: HYP/non-sec: Fix the ARCH Timer frequency setting.
  ls102xa: HYP/non-sec: support for ls102xa boards
  ARM: ls102xa: allow all the peripheral access permissions as R/W.
  ARM: ls102xa: Setting device's stream id for SMMUs.

 arch/arm/cpu/armv7/ls102xa/cpu.c                   |  15 +++
 arch/arm/cpu/armv7/nonsec_virt.S                   |   7 +-
 arch/arm/include/asm/arch-ls102xa/config.h         |   3 +
 arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h  |   3 +
 .../include/asm/arch-ls102xa/ls102xa_stream_id.h   |  17 +++
 arch/arm/include/asm/arch-ls102xa/ns_access.h      | 118 +++++++++++++++++++++
 board/freescale/common/Makefile                    |   4 +
 board/freescale/common/ls102xa_stream_id.c         |  18 ++++
 board/freescale/common/ns_access.c                 |  30 ++++++
 board/freescale/ls1021aqds/ls1021aqds.c            | 113 ++++++++++++++++++++
 board/freescale/ls1021atwr/ls1021atwr.c            | 112 +++++++++++++++++++
 include/configs/ls1021aqds.h                       |  10 ++
 include/configs/ls1021atwr.h                       |  10 ++
 include/configs/sun7i.h                            |   1 +
 14 files changed, 459 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-ls102xa/ls102xa_stream_id.h
 create mode 100644 arch/arm/include/asm/arch-ls102xa/ns_access.h
 create mode 100644 board/freescale/common/ls102xa_stream_id.c
 create mode 100644 board/freescale/common/ns_access.c

-- 
2.1.0.27.g96db324



More information about the U-Boot mailing list