[U-Boot] [PATCH 2/4] i2c: mxs: Add basic support for i2c framework
Marek Vasut
marex at denx.de
Mon Oct 20 00:23:41 CEST 2014
This patch just converts the function prototypes used throughout
this driver to match those of the i2c framework. There is so far
no functional change. This patch does not do the deeper integration
of the framework bits.
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Heiko Schocher <hs at denx.de>
---
drivers/i2c/Makefile | 2 +-
drivers/i2c/mxs_i2c.c | 49 +++++++++++++++++++++++++++++--------------------
include/configs/mxs.h | 3 ++-
3 files changed, 32 insertions(+), 22 deletions(-)
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 416ea4f..3191680 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -8,7 +8,6 @@
obj-$(CONFIG_BFIN_TWI_I2C) += bfin-twi_i2c.o
obj-$(CONFIG_DW_I2C) += designware_i2c.o
obj-$(CONFIG_I2C_MV) += mv_i2c.o
-obj-$(CONFIG_I2C_MXS) += mxs_i2c.o
obj-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
obj-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
obj-$(CONFIG_U8500_I2C) += u8500_i2c.o
@@ -21,6 +20,7 @@ obj-$(CONFIG_SYS_I2C_IHS) += ihs_i2c.o
obj-$(CONFIG_SYS_I2C_KONA) += kona_i2c.o
obj-$(CONFIG_SYS_I2C_MVTWSI) += mvtwsi.o
obj-$(CONFIG_SYS_I2C_MXC) += mxc_i2c.o
+obj-$(CONFIG_SYS_I2C_MXS) += mxs_i2c.o
obj-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
obj-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o
obj-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
diff --git a/drivers/i2c/mxs_i2c.c b/drivers/i2c/mxs_i2c.c
index cc313a6..9594008 100644
--- a/drivers/i2c/mxs_i2c.c
+++ b/drivers/i2c/mxs_i2c.c
@@ -29,11 +29,25 @@ static struct mxs_i2c_regs *mxs_i2c_get_base(struct i2c_adapter *adap)
return (struct mxs_i2c_regs *)MXS_I2C0_BASE;
}
+static unsigned int mxs_i2c_get_bus_speed(void)
+{
+ struct mxs_i2c_regs *i2c_regs = mxs_i2c_get_base(NULL);
+ uint32_t clk = mxc_get_clock(MXC_XTAL_CLK);
+ uint32_t timing0;
+
+ timing0 = readl(&i2c_regs->hw_i2c_timing0);
+ /*
+ * This is a reverse version of the algorithm presented in
+ * i2c_set_bus_speed(). Please refer there for details.
+ */
+ return clk / ((((timing0 >> 16) - 3) * 2) + 38);
+}
+
static void mxs_i2c_reset(void)
{
struct mxs_i2c_regs *i2c_regs = mxs_i2c_get_base(NULL);
int ret;
- int speed = i2c_get_bus_speed();
+ int speed = mxs_i2c_get_bus_speed();
ret = mxs_reset_block(&i2c_regs->hw_i2c_ctrl0_reg);
if (ret) {
@@ -165,7 +179,9 @@ err:
return 1;
}
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int mxs_i2c_if_read(struct i2c_adapter *adap, uint8_t chip,
+ uint addr, int alen, uint8_t *buffer,
+ int len)
{
struct mxs_i2c_regs *i2c_regs = mxs_i2c_get_base(NULL);
uint32_t tmp = 0;
@@ -214,7 +230,9 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
return 0;
}
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+static int mxs_i2c_if_write(struct i2c_adapter *adap, uint8_t chip,
+ uint addr, int alen, uint8_t *buffer,
+ int len)
{
int ret;
ret = mxs_i2c_write(chip, addr, alen, buffer, len, 1);
@@ -230,7 +248,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
return ret;
}
-int i2c_probe(uchar chip)
+static int mxs_i2c_probe(struct i2c_adapter *adap, uint8_t chip)
{
int ret;
ret = mxs_i2c_write(chip, 0, 1, NULL, 0, 1);
@@ -240,7 +258,7 @@ int i2c_probe(uchar chip)
return ret;
}
-int i2c_set_bus_speed(unsigned int speed)
+static uint mxs_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed)
{
struct mxs_i2c_regs *i2c_regs = mxs_i2c_get_base(NULL);
/*
@@ -281,24 +299,15 @@ int i2c_set_bus_speed(unsigned int speed)
return 0;
}
-unsigned int i2c_get_bus_speed(void)
-{
- struct mxs_i2c_regs *i2c_regs = mxs_i2c_get_base(NULL);
- uint32_t clk = mxc_get_clock(MXC_XTAL_CLK);
- uint32_t timing0;
-
- timing0 = readl(&i2c_regs->hw_i2c_timing0);
- /*
- * This is a reverse version of the algorithm presented in
- * i2c_set_bus_speed(). Please refer there for details.
- */
- return clk / ((((timing0 >> 16) - 3) * 2) + 38);
-}
-
-void i2c_init(int speed, int slaveadd)
+static void mxs_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
{
mxs_i2c_reset();
i2c_set_bus_speed(speed);
return;
}
+
+U_BOOT_I2C_ADAP_COMPLETE(mxs0, mxs_i2c_init, mxs_i2c_probe,
+ mxs_i2c_if_read, mxs_i2c_if_write,
+ mxs_i2c_set_bus_speed,
+ CONFIG_SYS_I2C_SPEED, 0, 0)
diff --git a/include/configs/mxs.h b/include/configs/mxs.h
index eb96fc1..dea8227 100644
--- a/include/configs/mxs.h
+++ b/include/configs/mxs.h
@@ -148,7 +148,8 @@
/* I2C */
#ifdef CONFIG_CMD_I2C
-#define CONFIG_I2C_MXS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXS
#define CONFIG_HARD_I2C
#ifndef CONFIG_SYS_I2C_SPEED
#define CONFIG_SYS_I2C_SPEED 400000
--
2.1.1
More information about the U-Boot
mailing list