[U-Boot] [PATCH v3 1/8] ls102xa: pblimage: Add pblimage tool support for LS102xA
Alison Wang
b18965 at freescale.com
Fri Oct 17 10:00:27 CEST 2014
For LS102xA, the size of spl/u-boot-spl.bin is variable.
This patch adds the support to deal with the variable
u-boot size in pblimage tool. It will be padded to 64
byte boundary.
Use pblimage_check_params() to add the specific operations
for ARM, such as PBI CRC and END command and the calculation
of pbl_cmd_initaddr.
Signed-off-by: Alison Wang <alison.wang at freescale.com>
---
Change log:
v3: Change the Copyright year.
v2: Remove the definition of CONFIG_SPL_MAX_SIZE.
Pad the variable u-boot size to 64 byte boundary in pblimage tool.
Use pblimage_check_params() insteady of basing on the file name.
Makefile | 3 +-
tools/pblimage.c | 108 +++++++++++++++++++++++++++++++++++++------------------
2 files changed, 76 insertions(+), 35 deletions(-)
diff --git a/Makefile b/Makefile
index 99097e1..164929e 100644
--- a/Makefile
+++ b/Makefile
@@ -963,7 +963,8 @@ u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
#concatenated with u-boot binary. It is need by PowerPC SoC having
#internal SRAM <= 512KB.
MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
- -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
+ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \
+ -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE)
spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
diff --git a/tools/pblimage.c b/tools/pblimage.c
index 6e6e801..28b0248 100644
--- a/tools/pblimage.c
+++ b/tools/pblimage.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012-2014 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -8,6 +8,10 @@
#include "pblimage.h"
#include "pbl_crc32.h"
+#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
+#define PBL_ACS_CONT_CMD 0x81000000
+#define PBL_ADDR_24BIT_MASK 0x00ffffff
+
/*
* Initialize to an invalid value.
*/
@@ -22,6 +26,13 @@ static int pbl_size;
static char *fname = "Unknown";
static int lineno = -1;
static struct pbl_header pblimage_header;
+static int uboot_size;
+static int arch_flag;
+
+static uint32_t pbl_cmd_initaddr;
+static uint32_t pbi_crc_cmd1;
+static uint32_t pbi_crc_cmd2;
+static uint32_t pbl_end_cmd[4];
static union
{
@@ -38,20 +49,6 @@ static union
* start offset by subtracting the size of the u-boot image from the
* top of the allowable 24-bit range.
*/
-static void init_next_pbl_cmd(FILE *fp_uboot)
-{
- struct stat st;
- int fd = fileno(fp_uboot);
-
- if (fstat(fd, &st) == -1) {
- printf("Error: Could not determine u-boot image size. %s\n",
- strerror(errno));
- exit(EXIT_FAILURE);
- }
-
- next_pbl_cmd = 0x82000000 - st.st_size;
-}
-
static void generate_pbl_cmd(void)
{
uint32_t val = next_pbl_cmd;
@@ -69,8 +66,12 @@ static void pbl_fget(size_t size, FILE *stream)
unsigned char c;
int c_temp;
- while (size && (c_temp = fgetc(stream)) != EOF) {
- c = (unsigned char)c_temp;
+ while (size) {
+ c_temp = fgetc(stream);
+ if (c_temp != EOF)
+ c = (unsigned char)c_temp;
+ else if ((c_temp == EOF) && (arch_flag == IH_ARCH_ARM))
+ c = 0xff;
*pmem_buf++ = c;
pbl_size++;
size--;
@@ -80,8 +81,8 @@ static void pbl_fget(size_t size, FILE *stream)
/* load split u-boot with PBI command 81xxxxxx. */
static void load_uboot(FILE *fp_uboot)
{
- init_next_pbl_cmd(fp_uboot);
- while (next_pbl_cmd < 0x82000000) {
+ next_pbl_cmd = pbl_cmd_initaddr - uboot_size;
+ while (next_pbl_cmd < pbl_cmd_initaddr) {
generate_pbl_cmd();
pbl_fget(64, fp_uboot);
}
@@ -154,8 +155,6 @@ static uint32_t reverse_byte(uint32_t val)
/* write end command and crc command to memory. */
static void add_end_cmd(void)
{
- uint32_t pbl_end_cmd[4] = {0x09138000, 0x00000000,
- 0x091380c0, 0x00000000};
uint32_t crc32_pbl;
int i;
unsigned char *p = (unsigned char *)&pbl_end_cmd;
@@ -172,8 +171,8 @@ static void add_end_cmd(void)
/* Add PBI CRC command. */
*pmem_buf++ = 0x08;
- *pmem_buf++ = 0x13;
- *pmem_buf++ = 0x80;
+ *pmem_buf++ = pbi_crc_cmd1;
+ *pmem_buf++ = pbi_crc_cmd2;
*pmem_buf++ = 0x40;
pbl_size += 4;
@@ -184,17 +183,6 @@ static void add_end_cmd(void)
*pmem_buf++ = (crc32_pbl >> 8) & 0xff;
*pmem_buf++ = (crc32_pbl) & 0xff;
pbl_size += 4;
-
- if ((pbl_size % 16) != 0) {
- for (i = 0; i < 8; i++) {
- *pmem_buf++ = 0x0;
- pbl_size++;
- }
- }
- if ((pbl_size % 16 != 0)) {
- printf("Error: Bad size of image file\n");
- exit(EXIT_FAILURE);
- }
}
void pbl_load_uboot(int ifd, struct image_tool_params *params)
@@ -268,12 +256,64 @@ static void pblimage_set_header(void *ptr, struct stat *sbuf, int ifd,
/*nothing need to do, pbl_load_uboot takes care of whole file. */
}
+int pblimage_check_params(struct image_tool_params *params)
+{
+ FILE *fp_uboot;
+ int fd;
+ struct stat st;
+
+ if (!params)
+ return EXIT_FAILURE;
+
+ fp_uboot = fopen(params->datafile, "r");
+ if (fp_uboot == NULL) {
+ printf("Error: %s open failed\n", params->datafile);
+ exit(EXIT_FAILURE);
+ }
+ fd = fileno(fp_uboot);
+
+ if (fstat(fd, &st) == -1) {
+ printf("Error: Could not determine u-boot image size. %s\n",
+ strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ /* For the variable size, we need to pad it to 64 byte boundary */
+ uboot_size = roundup(st.st_size, 64);
+
+ if (params->arch == IH_ARCH_ARM) {
+ arch_flag = IH_ARCH_ARM;
+ pbi_crc_cmd1 = 0x61;
+ pbi_crc_cmd2 = 0;
+ pbl_cmd_initaddr = params->addr & PBL_ADDR_24BIT_MASK;
+ pbl_cmd_initaddr |= PBL_ACS_CONT_CMD;
+ pbl_cmd_initaddr |= uboot_size;
+ pbl_end_cmd[0] = 0x09610000;
+ pbl_end_cmd[1] = 0x00000000;
+ pbl_end_cmd[2] = 0x096100c0;
+ pbl_end_cmd[3] = 0x00000000;
+ } else if (params->arch == IH_ARCH_PPC) {
+ arch_flag = IH_ARCH_PPC;
+ pbi_crc_cmd1 = 0x13;
+ pbi_crc_cmd2 = 0x80;
+ pbl_cmd_initaddr = 0x82000000;
+ pbl_end_cmd[0] = 0x09138000;
+ pbl_end_cmd[1] = 0x00000000;
+ pbl_end_cmd[2] = 0x091380c0;
+ pbl_end_cmd[3] = 0x00000000;
+ }
+
+ next_pbl_cmd = pbl_cmd_initaddr;
+ return 0;
+};
+
/* pblimage parameters */
static struct image_type_params pblimage_params = {
.name = "Freescale PBL Boot Image support",
.header_size = sizeof(struct pbl_header),
.hdr = (void *)&pblimage_header,
.check_image_type = pblimage_check_image_types,
+ .check_params = pblimage_check_params,
.verify_header = pblimage_verify_header,
.print_header = pblimage_print_header,
.set_header = pblimage_set_header,
--
2.1.0.27.g96db324
More information about the U-Boot
mailing list