[U-Boot] [PATCH v2 1/2] exynos: Enable config_distro_defaults.h
Ian Campbell
ijc at hellion.org.uk
Thu Oct 16 15:44:01 CEST 2014
From: Ian Campbell <ian.campbell at citrix.com>
...and remove explicit setting of things which this implies. This is done for
all exynos platforms (4 & 5) so it is added to exynos-common.h
I'm mainly interested in CONFIG_CMD_BOOTZ and CONFIG_SUPPORT_RAW_INITRD
I have build tested on all exynos platforms (MAKEALL -s exynos), but only boot
tested on arndale.
Signed-off-by: Ian Campbell <ian.campbell at citrix.com>
---
v2: This patch was previously "arndale: Enable config_distro_defaults.h". It
required significant rebasing.
---
include/configs/arndale.h | 2 --
include/configs/exynos-common.h | 13 ++-----------
include/configs/exynos5-common.h | 11 -----------
3 files changed, 2 insertions(+), 24 deletions(-)
diff --git a/include/configs/arndale.h b/include/configs/arndale.h
index f9ee40f..a87806d 100644
--- a/include/configs/arndale.h
+++ b/include/configs/arndale.h
@@ -17,8 +17,6 @@
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CMD_EXT2
-
/* USB */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_EXYNOS
diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h
index 371f32d..ea40bb6 100644
--- a/include/configs/exynos-common.h
+++ b/include/configs/exynos-common.h
@@ -23,9 +23,6 @@
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
-/* Enable fdt support */
-#define CONFIG_OF_LIBFDT
-
/* Keep L2 Cache Disabled */
#define CONFIG_CMD_CACHE
@@ -35,7 +32,6 @@
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_EDITING
#define CONFIG_ENV_OVERWRITE
/* Size of malloc() pool before and after relocation */
@@ -54,7 +50,6 @@
#define CONFIG_EXYNOS_DWMMC
#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK
/* PWM */
@@ -64,19 +59,13 @@
#include <config_cmd_default.h>
#define CONFIG_CMD_MMC
-#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
-#define CONFIG_CMD_FAT
#define CONFIG_FAT_WRITE
-#define CONFIG_DOS_PARTITION
-#define CONFIG_EFI_PARTITION
#define CONFIG_CMD_PART
#define CONFIG_PARTITION_UUIDS
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
@@ -88,4 +77,6 @@
#define CONFIG_SYS_NO_FLASH
#undef CONFIG_CMD_IMLS
+#include <config_distro_defaults.h>
+
#endif /* __CONFIG_H */
diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index ba591e7..b03966d 100644
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -55,9 +55,6 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
EXYNOS_DEVICE_SETTINGS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_NET
#define CONFIG_CMD_HASH
/* Thermal Management Unit */
@@ -174,12 +171,6 @@
#define CONFIG_ENV_SROM_BANK 1
#endif /*CONFIG_CMD_NET*/
-/* Enable PXE Support */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-#endif
-
/* SHA hashing */
#define CONFIG_CMD_HASH
#define CONFIG_HASH_VERIFY
@@ -189,8 +180,6 @@
/* Enable Time Command */
#define CONFIG_CMD_TIME
-#define CONFIG_CMD_BOOTZ
-
#define CONFIG_CMD_GPIO
/* USB boot mode */
--
2.1.0
More information about the U-Boot
mailing list