[U-Boot] [PATCH v6 06/17] esdhc: Add CONFIG_SYS_FSL_ESDHC_LE and CONFIG_SYS_FSL_ESDHC_BE macros

[Alison Wang]

From: Wang Huan <b18965 at freescale.com>

For LS102xA, the processor is in little-endian mode, while esdhc IP is
in big-endian mode. CONFIG_SYS_FSL_ESDHC_LE and CONFIG_SYS_FSL_ESDHC_BE
are added. So accessing ESDHC registers can be determined by ESDHC IP's
endian mode.

Signed-off-by: Alison Wang <alison.wang at freescale.com>
---
Change log:
 v6: New patch. Split from the v5's 06 patch.

 doc/README.fsl-esdhc |  5 +++++
 include/fsl_esdhc.h  | 14 +++++++++++++-
 2 files changed, 18 insertions(+), 1 deletion(-)
 create mode 100644 doc/README.fsl-esdhc

diff --git a/doc/README.fsl-esdhc b/doc/README.fsl-esdhc
new file mode 100644
index 0000000..b70f271
--- /dev/null
+++ b/doc/README.fsl-esdhc
@@ -0,0 +1,5 @@
+CONFIG_SYS_FSL_ESDHC_LE means ESDHC IP is in little-endian mode.
+CONFIG_SYS_FSL_ESDHC_BE means ESDHC IP is in big-endian mode.
+
+Accessing ESDHC registers can be determined by ESDHC IP's endian
+mode or processor's endian mode.
diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h
index 9814964..c1b6648 100644
--- a/include/fsl_esdhc.h
+++ b/include/fsl_esdhc.h
@@ -162,7 +162,19 @@ struct fsl_esdhc_cfg {
 };
 
 /* Select the correct accessors depending on endianess */
-#if __BYTE_ORDER == __LITTLE_ENDIAN
+#if defined CONFIG_SYS_FSL_ESDHC_LE
+#define esdhc_read32		in_le32
+#define esdhc_write32		out_le32
+#define esdhc_clrsetbits32	clrsetbits_le32
+#define esdhc_clrbits32		clrbits_le32
+#define esdhc_setbits32		setbits_le32
+#elif defined(CONFIG_SYS_FSL_ESDHC_BE)
+#define esdhc_read32            in_be32
+#define esdhc_write32           out_be32
+#define esdhc_clrsetbits32      clrsetbits_be32
+#define esdhc_clrbits32         clrbits_be32
+#define esdhc_setbits32         setbits_be32
+#elif __BYTE_ORDER == __LITTLE_ENDIAN
 #define esdhc_read32		in_le32
 #define esdhc_write32		out_le32
 #define esdhc_clrsetbits32	clrsetbits_le32
-- 
2.1.0.27.g96db324