[U-Boot] [PATCH 3/7] ARM: sun6i: Add support for the new power control module found on the A31
Chen-Yu Tsai
wens at csie.org
Mon Sep 8 15:28:08 CEST 2014
From: Oliver Schinagl <oliver at schinagl.nl>
To setup clocks and control voltages.
HdG: Rename the files from the somewhat generic pmu name to prcm.{c,h}
HdG: Make the prcm code only deal with the prcm, remove axp221 bits
Signed-off-by: Oliver Schinagl <oliver at schinagl.nl>
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
[wens at csie.org: spacing fixes reported by checkpatch.pl]
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
arch/arm/cpu/armv7/sunxi/Makefile | 1 +
arch/arm/cpu/armv7/sunxi/prcm.c | 37 +++++
arch/arm/include/asm/arch-sunxi/prcm.h | 238 +++++++++++++++++++++++++++++++++
3 files changed, 276 insertions(+)
create mode 100644 arch/arm/cpu/armv7/sunxi/prcm.c
create mode 100644 arch/arm/include/asm/arch-sunxi/prcm.h
diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
index e9721b2..f0473d2 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -11,6 +11,7 @@ obj-y += timer.o
obj-y += board.o
obj-y += clock.o
obj-y += pinmux.o
+obj-$(CONFIG_SUN6I) += prcm.o
obj-$(CONFIG_SUN4I) += clock_sun4i.o
obj-$(CONFIG_SUN5I) += clock_sun4i.o
obj-$(CONFIG_SUN7I) += clock_sun4i.o
diff --git a/arch/arm/cpu/armv7/sunxi/prcm.c b/arch/arm/cpu/armv7/sunxi/prcm.c
new file mode 100644
index 0000000..8f9bea9
--- /dev/null
+++ b/arch/arm/cpu/armv7/sunxi/prcm.c
@@ -0,0 +1,37 @@
+/*
+ * Sunxi A31 Power Management Unit
+ *
+ * (C) Copyright 2013 Oliver Schinagl <oliver at schinagl.nl>
+ * http://linux-sunxi.org
+ *
+ * Based on sun6i sources and earlier U-Boot Allwiner A10 SPL work
+ *
+ * (C) Copyright 2006-2013
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing at allwinnertech.com>
+ * Tom Cubie <tangliang at allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/prcm.h>
+#include <asm/arch/sys_proto.h>
+
+void prcm_init_apb0(void)
+{
+ struct sunxi_prcm_reg *prcm =
+ (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
+ u32 reg_val;
+
+ reg_val = readl(&prcm->apb0_gate);
+ reg_val |= PRCM_APB0_GATE_P2WI | PRCM_APB0_GATE_PIO;
+ writel(reg_val, &prcm->apb0_gate);
+
+ reg_val = readl(&prcm->apb0_reset);
+ reg_val |= PRCM_APB0_RESET_P2WI | PRCM_APB0_RESET_PIO;
+ writel(reg_val, &prcm->apb0_reset);
+}
diff --git a/arch/arm/include/asm/arch-sunxi/prcm.h b/arch/arm/include/asm/arch-sunxi/prcm.h
new file mode 100644
index 0000000..1b40f09
--- /dev/null
+++ b/arch/arm/include/asm/arch-sunxi/prcm.h
@@ -0,0 +1,238 @@
+/*
+ * Sunxi A31 Power Management Unit register definition.
+ *
+ * (C) Copyright 2013 Oliver Schinagl <oliver at schinagl.nl>
+ * http://linux-sunxi.org
+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
+ * Berg Xing <bergxing at allwinnertech.com>
+ * Tom Cubie <tangliang at allwinnertech.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _SUNXI_PRCM_H
+#define _SUNXI_PRCM_H
+
+#define __PRCM_CPUS_CFG_PRE(n) (((n) & 0x3) << 4)
+#define PRCM_CPUS_CFG_PRE_MASK __PRCM_CPUS_CFG_PRE(0x3)
+#define __PRCM_CPUS_CFG_PRE_DIV(n) (((n) >> 1) - 1)
+#define PRCM_CPUS_CFG_PRE_DIV(n) \
+ __PRCM_CPUS_CFG_PRE(__PRCM_CPUS_CFG_CLK_PRE(n))
+#define __PRCM_CPUS_CFG_POST(n) (((n) & 0x1f) << 8)
+#define PRCM_CPUS_CFG_POST_MASK __PRCM_CPUS_CFG_POST(0x1f)
+#define __PRCM_CPUS_CFG_POST_DIV(n) ((n) - 1)
+#define PRCM_CPUS_CFG_POST_DIV(n) \
+ __PRCM_CPUS_CFG_POST_DIV(__PRCM_CPUS_CFG_POST_DIV(n))
+#define __PRCM_CPUS_CFG_CLK_SRC(n) (((n) & 0x3) << 16)
+#define PRCM_CPUS_CFG_CLK_SRC_MASK __PRCM_CPUS_CFG_CLK_SRC(0x3)
+#define __PRCM_CPUS_CFG_CLK_SRC_LOSC 0x0
+#define __PRCM_CPUS_CFG_CLK_SRC_HOSC 0x1
+#define __PRCM_CPUS_CFG_CLK_SRC_PLL6 0x2
+#define __PRCM_CPUS_CFG_CLK_SRC_PDIV 0x3
+#define PRCM_CPUS_CFG_CLK_SRC_LOSC \
+ __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_LOSC)
+#define PRCM_CPUS_CFG_CLK_SRC_HOSC \
+ __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_HOSC)
+#define PRCM_CPUS_CFG_CLK_SRC_PLL6 \
+ __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PLL6)
+#define PRCM_CPUS_CFG_CLK_SRC_PDIV \
+ __PRCM_CPUS_CFG_CLK_SRC(__PRCM_CPUS_CFG_CLK_SRC_PDIV)
+
+#define __PRCM_APB0_RATIO(n) (((n) & 0x3) << 0)
+#define PRCM_APB0_RATIO_DIV_MASK __PRCM_APB0_RATIO_DIV(0x3)
+#define __PRCM_APB0_RATIO_DIV(n) (((n) >> 1) - 1)
+#define PRCM_APB0_RATIO_DIV(n) \
+ __PRCM_APB0_RATIO(__PRCM_APB0_RATIO_DIV(n))
+
+#define PRCM_CPU_CFG_NEON_CLK_EN (0x1 << 0)
+#define PRCM_CPU_CFG_CPU_CLK_EN (0x1 << 1)
+
+#define PRCM_APB0_GATE_PIO (0x1 << 0)
+#define PRCM_APB0_GATE_IR (0x1 << 1)
+#define PRCM_APB0_GATE_TIMER01 (0x1 << 2)
+#define PRCM_APB0_GATE_P2WI (0x1 << 3)
+#define PRCM_APB0_GATE_UART (0x1 << 4)
+#define PRCM_APB0_GATE_1WIRE (0x1 << 5)
+#define PRCM_APB0_GATE_I2C (0x1 << 6)
+
+#define PRCM_APB0_RESET_PIO (0x1 << 0)
+#define PRCM_APB0_RESET_IR (0x1 << 1)
+#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
+#define PRCM_APB0_RESET_P2WI (0x1 << 3)
+#define PRCM_APB0_RESET_UART (0x1 << 4)
+#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
+#define PRCM_APB0_RESET_I2C (0x1 << 6)
+
+#define PRCM_PLL_CTRL_PLL_BIAS (0x1 << 0)
+#define PRCM_PLL_CTRL_HOSC_GAIN_ENH (0x1 << 1)
+#define __PRCM_PLL_CTRL_USB_CLK_SRC(n) (((n) & 0x3) << 4)
+#define PRCM_PLL_CTRL_USB_CLK_SRC_MASK \
+ __PRCM_PLL_CTRL_USB_CLK_SRC(0x3)
+#define __PRCM_PLL_CTRL_USB_CLK_0 0x0
+#define __PRCM_PLL_CTRL_USB_CLK_1 0x1
+#define __PRCM_PLL_CTRL_USB_CLK_2 0x2
+#define __PRCM_PLL_CTRL_USB_CLK_3 0x3
+#define PRCM_PLL_CTRL_USB_CLK_0 \
+ __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_0)
+#define PRCM_PLL_CTRL_USB_CLK_1 \
+ __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_1)
+#define PRCM_PLL_CTRL_USB_CLK_2 \
+ __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_2)
+#define PRCM_PLL_CTRL_USB_CLK_3 \
+ __PRCM_PLL_CTRL_USB_CLK_SRC(__PRCM_PLL_CTRL_USB_CLK_3)
+#define __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) (((n) & 0x3) << 12)
+#define PRCM_PLL_CTRL_INT_PLL_IN_SEL_MASK \
+ __PRCM_PLL_CTRL_INT_PLL_IN_SEL(0x3)
+#define PRCM_PLL_CTRL_INT_PLL_IN_SEL(n) \
+ __PRCM_PLL_CTRL_INT_PLL_IN_SEL(n)
+#define __PRCM_PLL_CTRL_HOSC_CLK_SEL(n) (((n) & 0x3) << 20)
+#define PRCM_PLL_CTRL_HOSC_CLK_SEL_MASK \
+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(0x3)
+#define __PRCM_PLL_CTRL_HOSC_CLK_0 0x0
+#define __PRCM_PLL_CTRL_HOSC_CLK_1 0x1
+#define __PRCM_PLL_CTRL_HOSC_CLK_2 0x2
+#define __PRCM_PLL_CTRL_HOSC_CLK_3 0x3
+#define PRCM_PLL_CTRL_HOSC_CLK_0 \
+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_0)
+#define PRCM_PLL_CTRL_HOSC_CLK_1 \
+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_1)
+#define PRCM_PLL_CTRL_HOSC_CLK_2 \
+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_2)
+#define PRCM_PLL_CTRL_HOSC_CLK_3 \
+ __PRCM_PLL_CTRL_HOSC_CLK_SEL(__PRCM_PLL_CTRL_HOSC_CLK_3)
+#define PRCM_PLL_CTRL_PLL_TST_SRC_EXT (0x1 << 24)
+#define PRCM_PLL_CTRL_LDO_DIGITAL_EN (0x1 << 0)
+#define PRCM_PLL_CTRL_LDO_ANALOG_EN (0x1 << 1)
+#define PRCM_PLL_CTRL_EXT_OSC_EN (0x1 << 2)
+#define PRCM_PLL_CTRL_CLK_TST_EN (0x1 << 3)
+#define PRCM_PLL_CTRL_IN_PWR_HIGH (0x1 << 15) /* 3.3 for hi 2.5 for lo */
+#define __PRCM_PLL_CTRL_VDD_LDO_OUT(n) (((n) & 0x7) << 16)
+#define PRCM_PLL_CTRL_LDO_OUT_MASK \
+ __PRCM_PLL_CTRL_LDO_OUT(0x7)
+/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */
+#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
+#define PRCM_PLL_CTRL_LDO_OUT_H(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7)
+#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
+#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
+#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
+
+#define PRCM_CLK_1WIRE_GATE (0x1 << 31)
+
+#define __PRCM_CLK_MOD0_M(n) (((n) & 0xf) << 0)
+#define PRCM_CLK_MOD0_M_MASK __PRCM_CLK_MOD0_M(0xf)
+#define __PRCM_CLK_MOD0_M_X(n) (n - 1)
+#define PRCM_CLK_MOD0_M(n) __PRCM_CLK_MOD0_M(__PRCM_CLK_MOD0_M_X(n))
+#define PRCM_CLK_MOD0_OUT_PHASE(n) (((n) & 0x7) << 8)
+#define PRCM_CLK_MOD0_OUT_PHASE_MASK(n) PRCM_CLK_MOD0_OUT_PHASE(0x7)
+#define _PRCM_CLK_MOD0_N(n) (((n) & 0x3) << 16)
+#define PRCM_CLK_MOD0_N_MASK __PRCM_CLK_MOD_N(0x3)
+#define __PRCM_CLK_MOD0_N_X(n) (((n) >> 1) - 1)
+#define PRCM_CLK_MOD0_N(n) __PRCM_CLK_MOD0_N(__PRCM_CLK_MOD0_N_X(n))
+#define PRCM_CLK_MOD0_SMPL_PHASE(n) (((n) & 0x7) << 20)
+#define PRCM_CLK_MOD0_SMPL_PHASE_MASK PRCM_CLK_MOD0_SMPL_PHASE(0x7)
+#define PRCM_CLK_MOD0_SRC_SEL(n) (((n) & 0x7) << 24)
+#define PRCM_CLK_MOD0_SRC_SEL_MASK PRCM_CLK_MOD0_SRC_SEL(0x7)
+#define PRCM_CLK_MOD0_GATE_EN (0x1 << 31)
+
+#define PRCM_APB0_RESET_PIO (0x1 << 0)
+#define PRCM_APB0_RESET_IR (0x1 << 1)
+#define PRCM_APB0_RESET_TIMER01 (0x1 << 2)
+#define PRCM_APB0_RESET_P2WI (0x1 << 3)
+#define PRCM_APB0_RESET_UART (0x1 << 4)
+#define PRCM_APB0_RESET_1WIRE (0x1 << 5)
+#define PRCM_APB0_RESET_I2C (0x1 << 6)
+
+#define __PRCM_CLK_OUTD_M(n) (((n) & 0x7) << 8)
+#define PRCM_CLK_OUTD_M_MASK __PRCM_CLK_OUTD_M(0x7)
+#define __PRCM_CLK_OUTD_M_X() ((n) - 1)
+#define PRCM_CLK_OUTD_M(n) __PRCM_CLK_OUTD_M(__PRCM_CLK_OUTD_M_X(n))
+#define __PRCM_CLK_OUTD_N(n) (((n) & 0x7) << 20)
+#define PRCM_CLK_OUTD_N_MASK __PRCM_CLK_OUTD_N(0x7)
+#define __PRCM_CLK_OUTD_N_X(n) (((n) >> 1) - 1)
+#define PRCM_CLK_OUTD_N(n) __PRCM_CLK_OUTD_N(__PRCM_CLK_OUTD_N_X(n)
+#define __PRCM_CLK_OUTD_SRC_SEL(n) (((n) & 0x3) << 24)
+#define PRCM_CLK_OUTD_SRC_SEL_MASK __PRCM_CLK_OUTD_SRC_SEL(0x3)
+#define __PRCM_CLK_OUTD_SRC_LOSC2 0x0
+#define __PRCM_CLK_OUTD_SRC_LOSC 0x1
+#define __PRCM_CLK_OUTD_SRC_HOSC 0x2
+#define __PRCM_CLK_OUTD_SRC_ERR 0x3
+#define PRCM_CLK_OUTD_SRC_LOSC2 \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC2)
+#define PRCM_CLK_OUTD_SRC_LOSC \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_LOSC)
+#define PRCM_CLK_OUTD_SRC_HOSC \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_HOSC)
+#define PRCM_CLK_OUTD_SRC_ERR \
+#deifne __PRCM_CLK_OUTD_SRC_SEL(__PRCM_CLK_OUTD_SRC_ERR)
+#define PRCM_CLK_OUTD_EN (0x1 << 31)
+
+#define PRCM_CPU0_PWROFF (0x1 << 0)
+#define PRCM_CPU1_PWROFF (0x1 << 1)
+#define PRCM_CPU2_PWROFF (0x1 << 2)
+#define PRCM_CPU3_PWROFF (0x1 << 3)
+#define PRCM_CPU_ALL_PWROFF (0xf << 0)
+
+#define PRCM_VDD_SYS_DRAM_CH0_PAD_HOLD_PWROFF (0x1 << 0)
+#define PRCM_VDD_SYS_DRAM_CH1_PAD_HOLD_PWROFF (0x1 << 1)
+#define PRCM_VDD_SYS_AVCC_A_PWROFF (0x1 << 2)
+#define PRCM_VDD_SYS_CPU0_VDD_PWROFF (0x1 << 3)
+
+#define PRCM_VDD_GPU_PWROFF (0x1 << 0)
+
+#define PRCM_VDD_SYS_RESET (0x1 << 0)
+
+#define PRCM_CPU1_PWR_CLAMP(n) (((n) & 0xff) << 0)
+#define PRCM_CPU1_PWR_CLAMP_MASK PRCM_CPU1_PWR_CLAMP(0xff)
+
+#define PRCM_CPU2_PWR_CLAMP(n) (((n) & 0xff) << 0)
+#define PRCM_CPU2_PWR_CLAMP_MASK PRCM_CPU2_PWR_CLAMP(0xff)
+
+#define PRCM_CPU3_PWR_CLAMP(n) (((n) & 0xff) << 0)
+#define PRCM_CPU3_PWR_CLAMP_MASK PRCM_CPU3_PWR_CLAMP(0xff)
+
+#ifndef __ASSEMBLY__
+struct sunxi_prcm_reg {
+ u32 cpus_cfg; /* 0x000 */
+ u8 res0[0x8]; /* 0x004 */
+ u32 apb0_ratio; /* 0x00c */
+ u32 cpu0_cfg; /* 0x010 */
+ u32 cpu1_cfg; /* 0x014 */
+ u32 cpu2_cfg; /* 0x018 */
+ u32 cpu3_cfg; /* 0x01c */
+ u8 res1[0x8]; /* 0x020 */
+ u32 apb0_gate; /* 0x028 */
+ u8 res2[0x14]; /* 0x02c */
+ u32 pll_ctrl0; /* 0x040 */
+ u32 pll_ctrl1; /* 0x044 */
+ u8 res3[0x8]; /* 0x048 */
+ u32 clk_1wire; /* 0x050 */
+ u32 clk_ir; /* 0x054 */
+ u8 res4[0x58]; /* 0x058 */
+ u32 apb0_reset; /* 0x0b0 */
+ u8 res5[0x3c]; /* 0x0b4 */
+ u32 clk_outd; /* 0x0f0 */
+ u8 res6[0xc]; /* 0x0f4 */
+ u32 cpu_pwroff; /* 0x100 */
+ u8 res7[0xc]; /* 0x104 */
+ u32 vdd_sys_pwroff; /* 0x110 */
+ u8 res8[0x4]; /* 0x114 */
+ u32 gpu_pwroff; /* 0x118 */
+ u8 res9[0x4]; /* 0x11c */
+ u32 vdd_pwr_reset; /* 0x120 */
+ u8 res10[0x20]; /* 0x124 */
+ u32 cpu1_pwr_clamp; /* 0x144 */
+ u32 cpu2_pwr_clamp; /* 0x148 */
+ u32 cpu3_pwr_clamp; /* 0x14c */
+ u8 res11[0x30]; /* 0x150 */
+ u32 dram_pwr; /* 0x180 */
+ u8 res12[0xc]; /* 0x184 */
+ u32 dram_tst; /* 0x190 */
+};
+
+void prcm_init_apb0(void);
+#endif /* __ASSEMBLY__ */
+#endif /* _PRCM_H */
--
2.1.0
More information about the U-Boot
mailing list