[U-Boot] Running updated U-boot.img/u-boot.bin from already loaded u-boot shell

[Wolfgang Denk]

Dear harsha kiran,

In message <1410967834043-189648.post at n7.nabble.com> you wrote:
> 
> I am unable to load a different u-boot.img/u-boot.bin which is located in a
> different ext4 partition from the u-boot shell.

This is to be expected.  U-Boot is supposed to start on a system
coming directly out of reset.  If you try to run it on a
pre-initialized system, a number of assumptions / requirements may not
be met, and it will not work - actual behaviour depends on the
hardware, but the general rule is that such a use is bound to fail.


Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If there was anything that depressed him more than his own  cynicism,
it was that quite often it still wasn't as cynical as real life.
                                 - Terry Pratchett, _Guards! Guards!_