[U-Boot] [PATCH 3/3 v2] arm: ls102xa: Enable Driver Model SPI for ls1021atwr

[Haikun Wang]

Enable Driver Model SPI for ls1021atwr board.
DSPI and QSPI only be enabled when boot from QSPI.
DSPI and QSPI are compatible under Driver Model SPI.

Signed-off-by: Haikun Wang <Haikun.Wang at freescale.com>
---

Changes in v2:
- Move all changes inside of CONFIG_QSPI_BOOT 

Changes in v1: None

 include/configs/ls1021atwr.h | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index a13876b..1dd6336 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -228,16 +228,26 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
-/* QSPI */
+/* SPI */
 #ifdef CONFIG_QSPI_BOOT
+/* QSPI */
 #define CONFIG_FSL_QSPI
 #define QSPI0_AMBA_BASE			0x40000000
 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
 #define FSL_QSPI_FLASH_NUM		2
 
+#define CONFIG_SPI_FLASH_STMICRO
+
+/* DM SPI */
+#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+#define CONFIG_DM
+#define CONFIG_DM_SPI
 #define CONFIG_CMD_SF
+#define CONFIG_DM_SPI_FLASH
 #define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
+#endif
 #endif
 
 /*
-- 
2.1.0.27.g96db324