[U-Boot] [PATCH 2/3 v2] arm: ls102xa: Enable Driver Model SPI for ls1021aqds

[Jagan Teki]

On 21 April 2015 at 16:55, Haikun Wang <haikun.wang at freescale.com> wrote:
> Enable Driver Model SPI for ls1021aqds board.
> DSPI and QSPI is enabled only when boot from QSPI.
> DSPI and QSPI are compatible under Driver Model SPI.
>
> Signed-off-by: Haikun Wang <Haikun.Wang at freescale.com>
> ---

Reviewed-by: Jagannadha Sutradharudu Teki <jagannadh.teki at gmail.com>

>
> Changes in v2:
> - Move all changes inside of CONFIG_QSPI_BOOT
>
> Changes in v1: None
>
>  include/configs/ls1021aqds.h | 17 +++++++++++++++--
>  1 file changed, 15 insertions(+), 2 deletions(-)
>
> diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
> index 5de416d..c0e4bda 100644
> --- a/include/configs/ls1021aqds.h
> +++ b/include/configs/ls1021aqds.h
> @@ -408,16 +408,29 @@ unsigned long get_board_ddr_clk(void);
>  #define CONFIG_CMD_FAT
>  #define CONFIG_DOS_PARTITION
>
> -/* QSPI */
> +/* SPI */
>  #ifdef CONFIG_QSPI_BOOT
> +/* QSPI */
>  #define CONFIG_FSL_QSPI
>  #define QSPI0_AMBA_BASE                        0x40000000
>  #define FSL_QSPI_FLASH_SIZE            (1 << 24)
>  #define FSL_QSPI_FLASH_NUM             2
> +#define CONFIG_SPI_FLASH_SPANSION
>
> +/* DSPI */
> +#define CONFIG_FSL_DSPI
> +#define CONFIG_SPI_FLASH_ATMEL
> +
> +/* DM SPI */
> +#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
> +#define CONFIG_OF_CONTROL
> +#define CONFIG_OF_SEPARATE
> +#define CONFIG_DM
> +#define CONFIG_DM_SPI
>  #define CONFIG_CMD_SF
> +#define CONFIG_DM_SPI_FLASH
>  #define CONFIG_SPI_FLASH
> -#define CONFIG_SPI_FLASH_SPANSION
> +#endif
>  #endif
>
>  /*
> --
> 2.1.0.27.g96db324
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot

thanks!
-- 
Jagan.