[U-Boot] [PATCH 3/4] include:configs:ls1021atwr: Enable USB IP support

[Ramneek Mehresh]

Enable USB IP support for both EHCI and XHCI for
ls1021atwr platform

Signed-off-by: Ramneek Mehresh <ramneek.mehresh at freescale.com>
---
 include/configs/ls1021atwr.h | 29 +++++++++++++++++++++++++++++
 include/linux/usb/xhci-fsl.h |  5 +++++
 2 files changed, 34 insertions(+)

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index a13876b..0f59b3c 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -28,6 +28,35 @@
 #define CONFIG_SYS_INIT_RAM_SIZE	OCRAM_SIZE
 
 /*
+ * USB
+ */
+/* EHCI Support - disbaled by default */
+/*#define CONFIG_HAS_FSL_DR_USB*/
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#endif
+
+/*XHCI Support - enabled by default*/
+#define CONFIG_HAS_FSL_XHCI_USB
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
+#endif
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_EXT2
+#endif
+
+/*
  * Generic Timer Definitions
  */
 #define GENERIC_TIMER_CLK		12500000
diff --git a/include/linux/usb/xhci-fsl.h b/include/linux/usb/xhci-fsl.h
index 1751c7a..dc82151 100644
--- a/include/linux/usb/xhci-fsl.h
+++ b/include/linux/usb/xhci-fsl.h
@@ -50,6 +50,11 @@
 #define USBOTGSS_IRQ_SET_1_OEVT_EN		BIT(16)
 #define USBOTGSS_IRQ_SET_1_DMADISABLECLR_EN	BIT(17)
 
+#ifdef CONFIG_LS102XA
+#define CONFIG_SYS_FSL_XHCI_USB1_ADDR CONFIG_SYS_LS102XA_XHCI_USB1_ADDR
+#define CONFIG_SYS_FSL_XHCI_USB2_ADDR 0
+#endif
+
 struct fsl_xhci {
 	struct xhci_hccr *hcd;
 	struct dwc3 *dwc3_reg;
-- 
1.8.3.1