[U-Boot] [PATCH] x86: minnowmax: use the correct NOR in the configuration

[Gabriel Huau]

Hi Bin,

On 04/23/2015 08:20 PM, Bin Meng wrote:
> Hi Gabriel,
>
> On Fri, Apr 24, 2015 at 12:16 AM, Gabriel Huau <contact at huau-gabriel.fr> wrote:
>> The SPI NOR on the minnowboard max is a MICRON N25Q064A
>>
>> Signed-off-by: Gabriel Huau <contact at huau-gabriel.fr>
>> ---
>>   include/configs/minnowmax.h | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h
>> index 3c7b266..72393fa 100644
>> --- a/include/configs/minnowmax.h
>> +++ b/include/configs/minnowmax.h
>> @@ -43,7 +43,7 @@
>>
>>   #define CONFIG_SCSI_DEV_LIST            \
>>          {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_VALLEYVIEW_SATA}
>> -#define CONFIG_SPI_FLASH_SST
>> +#define CONFIG_SPI_FLASH_STMICRO
>>
>>   #define CONFIG_MMC
>>   #define CONFIG_SDHCI
>> --
> I think you need also update minnowmax.dts file to change the compatible string.
>
> Regards,
> Bin

Well ... I didn't see that as the NOR was still working on the board, I 
didn't find any reference except in the device tree for this compatible 
string, do you know if this is really used or not?
I'll do the modification anyway, it's always better to put the correct 
information.

Regards,
Gabriel