[U-Boot] [PATCH V5 4/6] imx: mx6qp Enable PRG clock for IPU

Stefano Babic sbabic at denx.de
Sun Aug 2 10:46:52 CEST 2015


On 11/07/2015 05:38, Peng Fan wrote:
> The i.MX6DQP has a PRG module, need to enable its clock for using IPU.
> 
> Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
> Signed-off-by: Brown Oliver <B37094 at freescale.com>
> Signed-off-by: Ye.Li <B37916 at freescale.com>
> Reviewed-by: Fabio Estevam <fabio.estevam at freescale.com>
> Acked-by: Stefano Babic <sbabic at denx.de>
> ---
> 
> Changes v5:
>  Add Stefano's Acked-by
> 
> Changes v4:
>  Take Fabio's suggestion, use setbits_le32. Add Fabio's Reviewed-by
> 
> Changes v3:
>   Remove ipu qos settings
> 
> Changes v2:
>   1. runtime check
>   2. introduce ipu qos settings for better performance
> 
>  arch/arm/cpu/armv7/mx6/clock.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c
> index cd4bfdd..3e94472 100644
> --- a/arch/arm/cpu/armv7/mx6/clock.c
> +++ b/arch/arm/cpu/armv7/mx6/clock.c
> @@ -853,6 +853,11 @@ void enable_ipu_clock(void)
>  	reg = readl(&mxc_ccm->CCGR3);
>  	reg |= MXC_CCM_CCGR3_IPU1_IPU_MASK;
>  	writel(reg, &mxc_ccm->CCGR3);
> +
> +	if (is_mx6dqp()) {
> +		setbits_le32(&mxc_ccm->CCGR6, MXC_CCM_CCGR6_PRG_CLK0_MASK);
> +		setbits_le32(&mxc_ccm->CCGR3, MXC_CCM_CCGR3_IPU2_IPU_MASK);
> +	}
>  }
>  #endif
>  /***************************************************/
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================


More information about the U-Boot mailing list