August 2015 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sat Aug 1 01:21:36 CEST 2015
Ending: Mon Aug 31 23:46:07 CEST 2015
Messages: 4702

• [U-Boot] [PATCH V3 1/2] ARM: tegra: Add e2220-1170 board   Stephen Warren
  • [U-Boot] [PATCH V3 1/2] ARM: tegra: Add e2220-1170 board   Simon Glass
• [U-Boot] [PATCH V3 2/2] ARM: tegra: Add p2371-0000 board   Stephen Warren
  • [U-Boot] [PATCH V3 2/2] ARM: tegra: Add p2371-0000 board   Simon Glass
    • [U-Boot] [PATCH V3 2/2] ARM: tegra: Add p2371-0000 board   Stephen Warren
• [U-Boot] [PATCH 1/5] am33xx: Update DT files, add am335x_gp_evm_config target   Tom Rini
  • [U-Boot] [PATCH 5/5] dra7xx: Add dra72_evm_defconfig using CONFIG_DM   Tom Rini
    • [U-Boot] [PATCH 5/5] dra7xx: Add dra72_evm_defconfig using CONFIG_DM   Simon Glass
      • [U-Boot] [PATCH 5/5] dra7xx: Add dra72_evm_defconfig using CONFIG_DM   Tom Rini
      • [U-Boot] [PATCH 5/5] dra7xx: Add dra72_evm_defconfig using CONFIG_DM   Simon Glass
      • [U-Boot] [PATCH 5/5] dra7xx: Add dra72_evm_defconfig using CONFIG_DM   Tom Rini
      • [U-Boot] [PATCH 5/5] dra7xx: Add dra72_evm_defconfig using CONFIG_DM   Simon Glass
    • [U-Boot] [U-Boot, 5/5] dra7xx: Add dra72_evm_defconfig using CONFIG_DM   Tom Rini
  • [U-Boot] [U-Boot, 1/5] am33xx: Update DT files, add am335x_gp_evm_config target   Tom Rini
• [U-Boot] [PATCH 2/5] gpio: omap: Drop 'method' parameter   Tom Rini
  • [U-Boot] [U-Boot,2/5] gpio: omap: Drop 'method' parameter   Tom Rini
• [U-Boot] [PATCH 3/5] ARM: SPL: Use CONFIG_SPL_DM not CONFIG_DM   Tom Rini
  • [U-Boot] [U-Boot, 3/5] ARM: SPL: Use CONFIG_SPL_DM not CONFIG_DM   Tom Rini
• [U-Boot] [PATCH 4/5] dra7xx: Move CONS_INDEX to Kconfig and enable CONFIG_SPL_STACK_ADDR   Tom Rini
  • [U-Boot] [U-Boot, 4/5] dra7xx: Move CONS_INDEX to Kconfig and enable CONFIG_SPL_STACK_ADDR   Tom Rini
• [U-Boot] [PATCH resend V2 1/3] mtd: nand: mxs support oobsize bigger than 512   Peng Fan
  • [U-Boot] [PATCH resend V2 1/3] mtd: nand: mxs support oobsize bigger than 512   Scott Wood
    • [U-Boot] [PATCH resend V2 1/3] mtd: nand: mxs support oobsize bigger than 512   Peng Fan
      • [U-Boot] [PATCH resend V2 1/3] mtd: nand: mxs support oobsize bigger than 512   Marek Vasut
      • [U-Boot] [PATCH resend V2 1/3] mtd: nand: mxs support oobsize bigger than 512   Scott Wood
      • [U-Boot] [PATCH resend V2 1/3] mtd: nand: mxs support oobsize bigger than 512   Marek Vasut
      • [U-Boot] [PATCH resend V2 1/3] mtd: nand: mxs support oobsize bigger than 512   Scott Wood
      • [U-Boot] [PATCH resend V2 1/3] mtd: nand: mxs support oobsize bigger than 512   Peng Fan
      • [U-Boot] [PATCH resend V2 1/3] mtd: nand: mxs support oobsize bigger than 512   Peng Fan
      • [U-Boot] [PATCH resend V2 1/3] mtd: nand: mxs support oobsize bigger than 512   Scott Wood
• [U-Boot] [PATCH 00/20] arm: rpi: Enable USB and Ethernet driver model Raspberry Pi   Stephen Warren
  • [U-Boot] [PATCH 00/20] arm: rpi: Enable USB and Ethernet driver model Raspberry Pi   Stephen Warren
  • [U-Boot] [PATCH 00/20] arm: rpi: Enable USB and Ethernet driver model Raspberry Pi   Marek Vasut
    • [U-Boot] [PATCH 00/20] arm: rpi: Enable USB and Ethernet driver model Raspberry Pi   Simon Glass
      • [U-Boot] [PATCH 00/20] arm: rpi: Enable USB and Ethernet driver model Raspberry Pi   Marek Vasut
• [U-Boot] [PATCH] lib: fdt: fix indent of #ifdef..#endif conditional   Masahiro Yamada
  • [U-Boot] [PATCH] lib: fdt: fix indent of #ifdef..#endif conditional   Simon Glass
    • [U-Boot] [PATCH] lib: fdt: fix indent of #ifdef..#endif conditional   Simon Glass
• [U-Boot] [PATCH] ARM: drop "optional" from target select in favor of ARCH_VERSATILE   Masahiro Yamada
  • [U-Boot] [PATCH] ARM: drop "optional" from target select in favor of ARCH_VERSATILE   Joe Hershberger
  • [U-Boot] ARM: drop "optional" from target select in favor of ARCH_VERSATILE   Tom Rini
• [U-Boot] [PATCH] ARM: zynq: drop "optional" from board select in favor of Zedboard   Masahiro Yamada
  • [U-Boot] [PATCH] ARM: zynq: drop "optional" from board select in favor of Zedboard   Michal Simek
    • [U-Boot] [PATCH] ARM: zynq: drop "optional" from board select in favor of Zedboard   Masahiro Yamada
• [U-Boot] [PATCH v3 1/2] arch: Make board selection choices optional   Masahiro Yamada
• [U-Boot] [PATCH] drivers: hierarchize drivers Kconfig menu   Paul Kocialkowski
  • [U-Boot] [PATCH] drivers: hierarchize drivers Kconfig menu   Bin Meng
    • [U-Boot] [PATCH] drivers: hierarchize drivers Kconfig menu   Masahiro Yamada
      • [U-Boot] [PATCH] drivers: hierarchize drivers Kconfig menu   Bin Meng
  • [U-Boot] [PATCH] drivers: hierarchize drivers Kconfig menu   Marek Vasut
    • [U-Boot] [PATCH] drivers: hierarchize drivers Kconfig menu   Paul Kocialkowski
  • [U-Boot] [PATCH] drivers: hierarchize drivers Kconfig menu   Simon Glass
• [U-Boot] [PATCH] patman: Don't run patman when it is imported as a module   Chris Packham
  • [U-Boot] [PATCH] patman: Don't run patman when it is imported as a module   Simon Glass
  • [U-Boot] [PATCH] patman: Don't run patman when it is imported as a module   Simon Glass
• [U-Boot] [PATCH] Makefile: Use correct timezone for U_BOOT_TZ   Chris Packham
  • [U-Boot] [PATCH v2] Makefile: Use correct timezone for U_BOOT_TZ   Chris Packham
    • [U-Boot] [PATCH v2] Makefile: Use correct timezone for U_BOOT_TZ   Chris Packham
• [U-Boot] [RFC PATCH] Makefile: Add SOURCE_DATE_TZ   Chris Packham
  • [U-Boot] [RFC PATCH] Makefile: Add SOURCE_DATE_TZ   Paul Kocialkowski
    • [U-Boot] [RFC PATCH] Makefile: Add SOURCE_DATE_TZ   Ximin Luo
      • [U-Boot] [RFC PATCH] Makefile: Add SOURCE_DATE_TZ   Ximin Luo
  • [U-Boot] [U-Boot,RFC] Makefile: Add SOURCE_DATE_TZ   Tom Rini
    • [U-Boot] [U-Boot,RFC] Makefile: Add SOURCE_DATE_TZ   Chris Packham
• [U-Boot] [PATCH v3 0/4] sunxi: nand: Basic NAND driver for SPL   Hans de Goede
  • [U-Boot] [PATCH v3 0/4] sunxi: nand: Basic NAND driver for SPL   Boris Brezillon
    • [U-Boot] [PATCH v3 0/4] sunxi: nand: Basic NAND driver for SPL   Scott Wood
      • [U-Boot] [PATCH v3 0/4] sunxi: nand: Basic NAND driver for SPL   Hans de Goede
      • [U-Boot] [PATCH v3 0/4] sunxi: nand: Basic NAND driver for SPL   Piotr Zierhoffer
      • [U-Boot] [PATCH v3 0/4] sunxi: nand: Basic NAND driver for SPL   Stefan Roese
      • [U-Boot] [PATCH v3 0/4] sunxi: nand: Basic NAND driver for SPL   Hans de Goede
      • [U-Boot] [PATCH v3 0/4] sunxi: nand: Basic NAND driver for SPL   Stefan Roese
      • [U-Boot] [PATCH v3 0/4] sunxi: nand: Basic NAND driver for SPL   Stefan Roese
      • [U-Boot] [PATCH v3 0/4] sunxi: nand: Basic NAND driver for SPL   Stefan Roese
• [U-Boot] [PATCH 1/3] sunxi: usb-phy: Never power off the usb ports   Hans de Goede
  • [U-Boot] [PATCH 3/3] sunxi: Do not add a stdout-path alias to dts on boards without a serial port   Hans de Goede
    • [U-Boot] [PATCH 3/3] sunxi: Do not add a stdout-path alias to dts on boards without a serial port   Ian Campbell
      • [U-Boot] [PATCH 3/3] sunxi: Do not add a stdout-path alias to dts on boards without a serial port   Hans de Goede
      • [U-Boot] [PATCH 3/3] sunxi: Do not add a stdout-path alias to dts on boards without a serial port   Ian Campbell
      • [U-Boot] [PATCH 3/3] sunxi: Do not add a stdout-path alias to dts on boards without a serial port   Hans de Goede
  • [U-Boot] [PATCH 1/3] sunxi: usb-phy: Never power off the usb ports   Ian Campbell
• [U-Boot] [PATCH 2/3] sunxi: Add CONFIG_USB0_ID_DET setting to 2 more tablets   Hans de Goede
  • [U-Boot] [PATCH 2/3] sunxi: Add CONFIG_USB0_ID_DET setting to 2 more tablets   Ian Campbell
• [U-Boot] [PATCH v2 00/15] Add macros to ease our life with independent CONFIGs between U-Boot and SPL   Masahiro Yamada
  • [U-Boot] [PATCH v2 14/15] of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL   Masahiro Yamada
    • [U-Boot] [PATCH v2 14/15] of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL   Tom Rini
    • [U-Boot] [PATCH v2 14/15] of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL   Simon Glass
  • [U-Boot] [PATCH v2 15/15] of: clean up OF_CONTROL ifdef conditionals   Masahiro Yamada
    • [U-Boot] [PATCH v2 15/15] of: clean up OF_CONTROL ifdef conditionals   Tom Rini
    • [U-Boot] [PATCH v2 15/15] of: clean up OF_CONTROL ifdef conditionals   Simon Glass
    • [U-Boot] [PATCH v2 15/15] of: clean up OF_CONTROL ifdef conditionals   Linus Walleij
  • [U-Boot] [PATCH v2 00/15] Add macros to ease our life with independent CONFIGs between U-Boot and SPL   Simon Glass
    • [U-Boot] [PATCH v2 00/15] Add macros to ease our life with independent CONFIGs between U-Boot and SPL   Scott Wood
      • [U-Boot] [PATCH v2 00/15] Add macros to ease our life with independent CONFIGs between U-Boot and SPL   Masahiro Yamada
• [U-Boot] [PATCH v2 01/15] kbuild: fixdep: optimize code slightly   Masahiro Yamada
  • [U-Boot] [PATCH v2 01/15] kbuild: fixdep: optimize code slightly   Tom Rini
  • [U-Boot] [PATCH v2 01/15] kbuild: fixdep: optimize code slightly   Simon Glass
• [U-Boot] [PATCH v2 02/15] kbuild: add a makefile macro useful with per-image config options   Masahiro Yamada
  • [U-Boot] [PATCH v2 02/15] kbuild: add a makefile macro useful with per-image config options   Tom Rini
  • [U-Boot] [PATCH v2 02/15] kbuild: add a makefile macro useful with per-image config options   Simon Glass
• [U-Boot] [PATCH v2 03/15] linux/kconfig.h: add CPP macros useful for per-image config options   Masahiro Yamada
  • [U-Boot] [PATCH v2 03/15] linux/kconfig.h: add CPP macros useful for per-image config options   Simon Glass
• [U-Boot] [PATCH v2 04/15] spl: move SPL driver entries to driver/Makefile   Masahiro Yamada
  • [U-Boot] [PATCH v2 04/15] spl: move SPL driver entries to driver/Makefile   Tom Rini
  • [U-Boot] [PATCH v2 04/15] spl: move SPL driver entries to driver/Makefile   Stefano Babic
  • [U-Boot] [PATCH v2 04/15] spl: move SPL driver entries to driver/Makefile   Simon Glass
• [U-Boot] [PATCH v2 05/15] dm: unify obj-$(CONFIG_DM) and obj-$(CONFIG_SPL_DM) entries   Masahiro Yamada
  • [U-Boot] [PATCH v2 05/15] dm: unify obj-$(CONFIG_DM) and obj-$(CONFIG_SPL_DM) entries   Tom Rini
    • [U-Boot] [PATCH v2 05/15] dm: unify obj-$(CONFIG_DM) and obj-$(CONFIG_SPL_DM) entries   Simon Glass
• [U-Boot] [PATCH v2 06/15] clk: rename CONFIG_SPL_CLK_SUPPORT to CONFIG_SPL_CLK   Masahiro Yamada
  • [U-Boot] [PATCH v2 06/15] clk: rename CONFIG_SPL_CLK_SUPPORT to CONFIG_SPL_CLK   Tom Rini
  • [U-Boot] [PATCH v2 06/15] clk: rename CONFIG_SPL_CLK_SUPPORT to CONFIG_SPL_CLK   Stefano Babic
  • [U-Boot] [PATCH v2 06/15] clk: rename CONFIG_SPL_CLK_SUPPORT to CONFIG_SPL_CLK   Simon Glass
• [U-Boot] [PATCH v2 07/15] clk: unify obj-$(CONFIG_CLK) and obj-$(CONFIG_SPL_CLK) entries   Masahiro Yamada
  • [U-Boot] [PATCH v2 07/15] clk: unify obj-$(CONFIG_CLK) and obj-$(CONFIG_SPL_CLK) entries   Tom Rini
  • [U-Boot] [PATCH v2 07/15] clk: unify obj-$(CONFIG_CLK) and obj-$(CONFIG_SPL_CLK) entries   Stefano Babic
  • [U-Boot] [PATCH v2 07/15] clk: unify obj-$(CONFIG_CLK) and obj-$(CONFIG_SPL_CLK) entries   Simon Glass
• [U-Boot] [PATCH v2 08/15] ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM   Masahiro Yamada
  • [U-Boot] [PATCH v2 08/15] ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM   Tom Rini
    • [U-Boot] [PATCH v2 08/15] ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM   Simon Glass
• [U-Boot] [PATCH v2 09/15] ram: unify obj-$(CONFIG_RAM) and obj-$(CONFIG_SPL_RAM) entries   Masahiro Yamada
  • [U-Boot] [PATCH v2 09/15] ram: unify obj-$(CONFIG_RAM) and obj-$(CONFIG_SPL_RAM) entries   Tom Rini
  • [U-Boot] [PATCH v2 09/15] ram: unify obj-$(CONFIG_RAM) and obj-$(CONFIG_SPL_RAM) entries   Simon Glass
• [U-Boot] [PATCH v2 10/15] led: rename CONFIG_SPL_LED_SUPPORT to CONFIG_SPL_LED   Masahiro Yamada
  • [U-Boot] [PATCH v2 10/15] led: rename CONFIG_SPL_LED_SUPPORT to CONFIG_SPL_LED   Tom Rini
  • [U-Boot] [PATCH v2 10/15] led: rename CONFIG_SPL_LED_SUPPORT to CONFIG_SPL_LED   Simon Glass
• [U-Boot] [PATCH v2 11/15] led: unify obj-$(CONFIG_LED) and obj-$(CONFIG_SPL_LED) entries   Masahiro Yamada
  • [U-Boot] [PATCH v2 11/15] led: unify obj-$(CONFIG_LED) and obj-$(CONFIG_SPL_LED) entries   Tom Rini
  • [U-Boot] [PATCH v2 11/15] led: unify obj-$(CONFIG_LED) and obj-$(CONFIG_SPL_LED) entries   Stefano Babic
  • [U-Boot] [PATCH v2 11/15] led: unify obj-$(CONFIG_LED) and obj-$(CONFIG_SPL_LED) entries   Simon Glass
• [U-Boot] [PATCH v2 12/15] dm: drop CONFIG_DM_DEVICE_REMOVE from uncmd list   Masahiro Yamada
  • [U-Boot] [PATCH v2 12/15] dm: drop CONFIG_DM_DEVICE_REMOVE from uncmd list   Tom Rini
  • [U-Boot] [PATCH v2 12/15] dm: drop CONFIG_DM_DEVICE_REMOVE from uncmd list   Simon Glass
• [U-Boot] [PATCH v2 13/15] fdtdec: fix OF_CONTROL switch   Masahiro Yamada
  • [U-Boot] [PATCH v2 13/15] fdtdec: fix OF_CONTROL switch   Tom Rini
  • [U-Boot] [PATCH v2 13/15] fdtdec: fix OF_CONTROL switch   Simon Glass
• [U-Boot] Pull request: u-boot-arm/master   Tom Rini
• [U-Boot] Please pull u-boot-x86   Tom Rini
  • [U-Boot] Please pull u-boot-x86   Simon Glass
    • [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx master   Tom Rini
• [U-Boot] [PATCH] arm: Correct comments in crt0.S for the recent SPL improvements   Simon Glass
• [U-Boot] [PATCH] dm: serial: Add a REQUIRE_SERIAL_CONSOLE option for boards with no serial port   Simon Glass
  • [U-Boot] [PATCH] dm: serial: Add a REQUIRE_SERIAL_CONSOLE option for boards with no serial port   Simon Glass
    • [U-Boot] [PATCH] dm: serial: Add a REQUIRE_SERIAL_CONSOLE option for boards with no serial port   Hans de Goede
• [U-Boot] [PATCH 01/16] ARM: remove vpac270 board support   Simon Glass
  • [U-Boot] [PATCH 01/16] ARM: remove vpac270 board support   Marek Vasut
• [U-Boot] [PATCH 00/28] socfpga: sdram.c cleanups   Marek Vasut
  • [U-Boot] [PATCH 01/28] ddr: altera: sdram: Switch to generic_hweight32()   Marek Vasut
  • [U-Boot] [PATCH 02/28] ddr: altera: sdram: Clean up compute_errata_rows() part 1   Marek Vasut
  • [U-Boot] [PATCH 03/28] ddr: altera: sdram: Clean up compute_errata_rows() part 2   Marek Vasut
  • [U-Boot] [PATCH 04/28] ddr: altera: sdram: Clean up set_sdr_ctrlcfg()   Marek Vasut
  • [U-Boot] [PATCH 05/28] ddr: altera: sdram: Clean up set_sdr_dram_timing*()   Marek Vasut
  • [U-Boot] [PATCH 06/28] ddr: altera: sdram: Clean up set_sdr_addr_rw()   Marek Vasut
  • [U-Boot] [PATCH 07/28] ddr: altera: sdram: Clean up set_sdr_static_cfg()   Marek Vasut
  • [U-Boot] [PATCH 08/28] ddr: altera: sdram: Clean up set_sdr_fifo_cfg()   Marek Vasut
  • [U-Boot] [PATCH 09/28] ddr: altera: sdram: Clean up set_sdr_mp_weight()   Marek Vasut
  • [U-Boot] [PATCH 10/28] ddr: altera: sdram: Clean up set_sdr_mp_pacing()   Marek Vasut
  • [U-Boot] [PATCH 11/28] ddr: altera: sdram: Clean up set_sdr_mp_threshold()   Marek Vasut
  • [U-Boot] [PATCH 12/28] ddr: altera: sdram: Introduce socfpga_sdram_config() structure   Marek Vasut
  • [U-Boot] [PATCH 13/28] ddr: altera: sdram: Clean up sdram_mmr_init_full() part 1   Marek Vasut
  • [U-Boot] [PATCH 14/28] ddr: altera: sdram: Clean up sdram_mmr_init_full() part 2   Marek Vasut
  • [U-Boot] [PATCH 15/28] ddr: altera: sdram: Clean up sdram_mmr_init_full() part 3   Marek Vasut
  • [U-Boot] [PATCH 16/28] ddr: altera: sdram: Clean up sdram_mmr_init_full() part 4   Marek Vasut
    • [U-Boot] [PATCH 16/28] ddr: altera: sdram: Clean up sdram_mmr_init_full() part 4   Dinh Nguyen
      • [U-Boot] [PATCH 16/28] ddr: altera: sdram: Clean up sdram_mmr_init_full() part 4   Marek Vasut
  • [U-Boot] [PATCH 17/28] ddr: altera: sdram: Clean up sdram_mmr_init_full() part 5   Marek Vasut
  • [U-Boot] [PATCH 18/28] ddr: altera: sdram: Clean up sdram_mmr_init_full() part 6   Marek Vasut
  • [U-Boot] [PATCH 19/28] ddr: altera: sdram: Clean up sdram_mmr_init_full() part 7   Marek Vasut
  • [U-Boot] [PATCH 20/28] ddr: altera: sdram: Clean up sdram_mmr_init_full() part 8   Marek Vasut
  • [U-Boot] [PATCH 21/28] ddr: altera: sdram: Introduce socfpga_sdram_get_config()   Marek Vasut
  • [U-Boot] [PATCH 22/28] ddr: altera: sdram: Clean up sdram_calculate_size() part 1   Marek Vasut
  • [U-Boot] [PATCH 23/28] ddr: altera: sdram: Clean up sdram_calculate_size() part 2   Marek Vasut
  • [U-Boot] [PATCH 24/28] ddr: altera: sdram: Clean up sdram_write_verify()   Marek Vasut
  • [U-Boot] [PATCH 25/28] ddr: altera: sdram: Add missing kerneldoc   Marek Vasut
  • [U-Boot] [PATCH 26/28] ddr: altera: sdram: Minor cleanup in sdram_set_rule()   Marek Vasut
  • [U-Boot] [PATCH 27/28] ddr: altera: sdram: Minor cleanup in sdram_get_rule()   Marek Vasut
  • [U-Boot] [PATCH 28/28] ddr: altera: sdram: Make sdram_start and sdram_end into u32   Marek Vasut
  • [U-Boot] [PATCH 00/28] socfpga: sdram.c cleanups   Marek Vasut
  • [U-Boot] [PATCH 00/28] socfpga: sdram.c cleanups   Dinh Nguyen
    • [U-Boot] [PATCH 00/28] socfpga: sdram.c cleanups   Marek Vasut
• [U-Boot] [PATCH] armv8: ls2085a: Update bootargs as per default target console   Prabhakar Kushwaha
• [U-Boot] [PATCH V2 12/12] kconfig: add config option for shell prompt   Nikita Kiryanov
  • [U-Boot] [PATCH V2 12/12] kconfig: add config option for shell prompt   Stefano Babic
    • [U-Boot] [PATCH V2 12/12] kconfig: add config option for shell prompt   Tom Rini
• [U-Boot] [PATCH V5 1/6] imx: add cpu type for i.MX6QP/DP   Stefano Babic
• [U-Boot] [PATCH V5 2/6] imx: mx6: ccm: Change the clock settings for i.MX6QP   Stefano Babic
• [U-Boot] [PATCH V5 3/6] imx: mx6: hab : Remove the cache issue workaroud in hab for i.MX6QP   Stefano Babic
• [U-Boot] [PATCH V5 4/6] imx: mx6qp Enable PRG clock for IPU   Stefano Babic
• [U-Boot] [PATCH V5 5/6] imx: mx6sabresd/sabreauto runtime setting fdt_file   Stefano Babic
• [U-Boot] [PATCH V5 6/6] imx: mx6qpsabreauto: Add MX6QP SABREAUTO CPU3 board support   Stefano Babic
• [U-Boot] [PATCH 01/12] arm: mx6: cm-fx6: map HDMI to IPU1 DI0 explicitly   Stefano Babic
• [U-Boot] [PATCH 02/12] arm: mx6: cm-fx6: make it possible to not init display   Stefano Babic
• [U-Boot] [PATCH 03/12] arm: mx6: cm-fx6: add support for displaytype env var   Stefano Babic
• [U-Boot] [PATCH 04/12] arm: mx6: cm-fx6: setup hdmi only on hdmi enable   Stefano Babic
• [U-Boot] [PATCH 05/12] arm: mx6: cm-fx6: move CMD configs to defconfig   Stefano Babic
• [U-Boot] [PATCH 06/12] arm: mx6: cm-fx6: move cm-fx6 target under ARCH_MX6   Stefano Babic
• [U-Boot] [PATCH 07/12] arm: mx6: kconfig: don't select CPU_V7 per board   Stefano Babic
• [U-Boot] [PATCH 08/12] arm: mx6: usb: kconfig: add USB_EHCI_MX6 kconfig option   Stefano Babic
• [U-Boot] [PATCH 09/12] usb: kconfig: usb keyboard kconfig   Stefano Babic
• [U-Boot] [PATCH 11/12] sf: kconfig: add kconfig options for spi flashes   Stefano Babic
• [U-Boot] [PATCH v3 01/15] imx: mx6ul: Add i.MX6UL CPU type   Stefano Babic
• [U-Boot] [PATCH v3 02/15] imx: mx6ul: Add pins IOMUX head file   Stefano Babic
• [U-Boot] [PATCH v3 03/15] imx: mx6ul: Update imx registers head file   Stefano Babic
  • [U-Boot] [PATCH v3 03/15] imx: mx6ul: Update imx registers head file   Stefano Babic
• [U-Boot] [PATCH v3 04/15] imx: mx6ul Add CONFIG_SYS_CACHELINE_SIZE for i.MX6UL   Stefano Babic
• [U-Boot] [PATCH v3 05/15] imx-common: timer: add i.MX6UL support   Stefano Babic
• [U-Boot] [PATCH v3 06/15] imx: mx6ul remove errata for i.MX6UL   Stefano Babic
• [U-Boot] [PATCH v3 07/15] imx:mx6ul add clock support   Stefano Babic
• [U-Boot] [PATCH v3 08/15] imx: mx6ul select SYS_L2CACHE_OFF   Stefano Babic
• [U-Boot] [PATCH v3 09/15] imx: mx6ul update soc related settings   Stefano Babic
• [U-Boot] [PATCH v3 10/15] imx: mx6 add PAD_CTL_SPEED_LOW for i.MX6SX/UL   Stefano Babic
• [U-Boot] [PATCH v3 11/15] mxc: gpio add i.MX6UL support   Stefano Babic
• [U-Boot] [PATCH v3 12/15] mx6_common: Fix LOADADDR and SYS_TEXT_BASE for i.MX6UL   Stefano Babic
• [U-Boot] [PATCH v3 13/15] imx:mx6ul add dram spl configuration and header file   Stefano Babic
• [U-Boot] [PATCH v3 14/15] imx: imx6_spl add mx6ul support   Stefano Babic
• [U-Boot] [PATCH v3 15/15] imx: mx6ul_14x14_evk add basic board support   Stefano Babic
  • [U-Boot] [PATCH v3 15/15] imx: mx6ul_14x14_evk add basic board support   Fabio Estevam
    • [U-Boot] [PATCH v3 15/15] imx: mx6ul_14x14_evk add basic board support   Peng Fan
      • [U-Boot] [PATCH v3 15/15] imx: mx6ul_14x14_evk add basic board support   Fabio Estevam
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
  • [U-Boot] [PATCH] fsl_esdhc.c: Always make check_and_invalidate_dcache_range available   Tom Rini
    • [U-Boot] [PATCH] fsl_esdhc.c: Always make check_and_invalidate_dcache_range available   Tom Rini
  • [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] [PATCH 01/13][v4] power: pmic: add pfuze3000 support   Stefano Babic
  • [U-Boot] [PATCH 01/13][v4] power: pmic: add pfuze3000 support   Przemyslaw Marczak
    • [U-Boot] [PATCH 01/13][v4] power: pmic: add pfuze3000 support   Peng Fan
      • [U-Boot] [PATCH 01/13][v4] power: pmic: add pfuze3000 support   Przemyslaw Marczak
  • [U-Boot] [PATCH 01/13][v4] power: pmic: add pfuze3000 support   Przemyslaw Marczak
• [U-Boot] [PATCH 02/13][v4] imx: iomux-v3: add imx7d support for iomuxc   Stefano Babic
  • [U-Boot] [PATCH 02/13][v4] imx: iomux-v3: add imx7d support for iomuxc   Fabio Estevam
    • [U-Boot] [PATCH 02/13][v4] imx: iomux-v3: add imx7d support for iomuxc   Stefano Babic
• [U-Boot] [PATCH v2 02/47] dm: core: Check for empty list in uclass_find_device()   Bin Meng
  • [U-Boot] [PATCH v2 02/47] dm: core: Check for empty list in uclass_find_device()   Simon Glass
• [U-Boot] [PATCH v2 04/47] elf: Add a few definitions for 64-bit relocation   Bin Meng
  • [U-Boot] [PATCH v2 04/47] elf: Add a few definitions for 64-bit relocation   Simon Glass
• [U-Boot] [PATCH v2 05/47] Add a way to skip relocation   Bin Meng
• [U-Boot] [PATCH v2 07/47] Bring in __aligned_u64 and friends to linux/types.h   Bin Meng
  • [U-Boot] [PATCH v2 07/47] Bring in __aligned_u64 and friends to linux/types.h   Simon Glass
• [U-Boot] [PATCH v2 10/47] Reserve the top 16 flag bits for architecture-specific use   Bin Meng
  • [U-Boot] [PATCH v2 10/47] Reserve the top 16 flag bits for architecture-specific use   Simon Glass
• [U-Boot] [PATCH v2 11/47] x86: Tidy up global_data flags   Bin Meng
  • [U-Boot] [PATCH v2 11/47] x86: Tidy up global_data flags   Simon Glass
• [U-Boot] [PATCH v2 15/47] x86: Tidy up a few minor issues with interrupts   Bin Meng
  • [U-Boot] [PATCH v2 15/47] x86: Tidy up a few minor issues with interrupts   Simon Glass
• [U-Boot] [PATCH v2 17/47] pci: Fix up code for CONFIG_PCI_ENUM_ONLY   Bin Meng
  • [U-Boot] [PATCH v2 17/47] pci: Fix up code for CONFIG_PCI_ENUM_ONLY   Simon Glass
• [U-Boot] [PATCH v2 18/47] x86: Allow use of global_data with EFI   Bin Meng
  • [U-Boot] [PATCH v2 18/47] x86: Allow use of global_data with EFI   Simon Glass
• [U-Boot] [PATCH v2 19/47] efi: Add start-up library code   Bin Meng
  • [U-Boot] [PATCH v2 19/47] efi: Add start-up library code   Simon Glass
• [U-Boot] [PATCH 18/48] efi: Add start-up library code   Bin Meng
• [U-Boot] [PATCH v2 20/47] efi: Avoid using non-existent text base   Bin Meng
  • [U-Boot] [PATCH v2 20/47] efi: Avoid using non-existent text base   Simon Glass
• [U-Boot] [PATCH v2 01/47] Support removing default assembler flags   Tom Rini
  • [U-Boot] [PATCH v2 01/47] Support removing default assembler flags   Simon Glass
• [U-Boot] [PATCH RESEND] tools/imximage: set DCD pointer to NULL when its length is 0   Baruch Siach
  • [U-Boot] [PATCH RESEND] tools/imximage: set DCD pointer to NULL when its length is 0   Stefano Babic
• [U-Boot] [PATCH 7/7] x86: bayleybay: Configure PCI IRQ   Simon Glass
  • [U-Boot] [PATCH 7/7] x86: bayleybay: Configure PCI IRQ   Simon Glass
• [U-Boot] [PATCH 2/2] x86: qemu: Add MP initialization   Simon Glass
  • [U-Boot] [PATCH 2/2] x86: qemu: Add MP initialization   Simon Glass
• [U-Boot] [PATCH 1/2] x86: Add a 'pause' instruction in __udelay() for QEMU target   Simon Glass
  • [U-Boot] [PATCH 1/2] x86: Add a 'pause' instruction in __udelay() for QEMU target   Simon Glass
• [U-Boot] [PATCH 1/5] dm: pci: Allow scan bridge child devices before relocation   Simon Glass
  • [U-Boot] [PATCH 1/5] dm: pci: Allow scan bridge child devices before relocation   Simon Glass
    • [U-Boot] [PATCH 1/5] dm: pci: Allow scan bridge child devices before relocation   Simon Glass
      • [U-Boot] [PATCH 1/5] dm: pci: Allow scan bridge child devices before relocation   Bin Meng
• [U-Boot] [PATCH 5/5] doc: dm: Update pci-info.txt for pci support   Simon Glass
  • [U-Boot] [PATCH 5/5] doc: dm: Update pci-info.txt for pci support   Simon Glass
• [U-Boot] [PATCH] common: command add '\n' for debug msg   Simon Glass
  • [U-Boot] [PATCH] common: command add '\n' for debug msg   Simon Glass
• [U-Boot] [PATCH 1/2] gitignore: Add defconfig and fdtgrep   Simon Glass
  • [U-Boot] [PATCH 1/2] gitignore: Add defconfig and fdtgrep   Simon Glass
• [U-Boot] [PATCH 2/2] common: Print nothing in the __weak checkboard()   Simon Glass
  • [U-Boot] [PATCH 2/2] common: Print nothing in the __weak checkboard()   Simon Glass
• [U-Boot] [PATCH] integrator: switch to DM serial port   Simon Glass
• [U-Boot] [PATCH] fdt: Fix fdtdec_get_addr_size() for 64-bit   Simon Glass
  • [U-Boot] [PATCH] fdt: Fix fdtdec_get_addr_size() for 64-bit   Thierry Reding
    • [U-Boot] [PATCH] fdt: Fix fdtdec_get_addr_size() for 64-bit   Stephen Warren
      • [U-Boot] [PATCH] fdt: Fix fdtdec_get_addr_size() for 64-bit   Thierry Reding
• [U-Boot] [PATCH] dm: core: Allow simple-bus driver in SPL   Simon Glass
  • [U-Boot] [PATCH] dm: core: Allow simple-bus driver in SPL   Marek Vasut
• [U-Boot] [PATCH 1/2] gpio: Add DW APB GPIO driver   Simon Glass
  • [U-Boot] [PATCH 1/2] gpio: Add DW APB GPIO driver   Marek Vasut
    • [U-Boot] [PATCH 1/2] gpio: Add DW APB GPIO driver   Simon Glass
      • [U-Boot] [PATCH 1/2] gpio: Add DW APB GPIO driver   Marek Vasut
      • [U-Boot] [PATCH 1/2] gpio: Add DW APB GPIO driver   Simon Glass
      • [U-Boot] [PATCH 1/2] gpio: Add DW APB GPIO driver   Marek Vasut
      • [U-Boot] [PATCH 1/2] gpio: Add DW APB GPIO driver   Simon Glass
      • [U-Boot] [PATCH 1/2] gpio: Add DW APB GPIO driver   Marek Vasut
      • [U-Boot] [PATCH 1/2] gpio: Add DW APB GPIO driver   Simon Glass
      • [U-Boot] [PATCH 1/2] gpio: Add DW APB GPIO driver   Marek Vasut
      • [U-Boot] [PATCH 1/2] gpio: Add DW APB GPIO driver   Simon Glass
      • [U-Boot] [PATCH 1/2] gpio: Add DW APB GPIO driver   Marek Vasut
• [U-Boot] [PATCH 2/2] arm: socfpga: Enable DWAPB GPIO driver   Simon Glass
• [U-Boot] [PATCH] env_mmc: avoid stack allocation for env   Simon Glass
• [U-Boot] [PATCH 2/2] ARM: tegra: Use architected timer on ARMv8   Simon Glass
• [U-Boot] [PATCH U-Boot] ARM: rpi_b: detect board revision   Simon Glass
• [U-Boot] [PATCH v2 1/9] doc: dfu: tftp: README entry for TFTP extension of DFU   Simon Glass
  • [U-Boot] [PATCH v2 1/9] doc: dfu: tftp: README entry for TFTP extension of DFU   Lukasz Majewski
• [U-Boot] [PATCH v2 3/9] tftp: update: Allow some parts of the code to be reused when CONFIG_SYS_NO_FLASH is set   Simon Glass
• [U-Boot] [PATCH v2 4/9] dfu: tftp: update: Provide tftp support for the DFU subsystem   Simon Glass
  • [U-Boot] [PATCH v2 4/9] dfu: tftp: update: Provide tftp support for the DFU subsystem   Joe Hershberger
  • [U-Boot] [PATCH v2 4/9] dfu: tftp: update: Provide tftp support for the DFU subsystem   Lukasz Majewski
• [U-Boot] [PATCH v2 6/9] update: tftp: dfu: Extend update_tftp() function to support DFU   Simon Glass
  • [U-Boot] [PATCH v2 6/9] update: tftp: dfu: Extend update_tftp() function to support DFU   Joe Hershberger
  • [U-Boot] [PATCH v2 6/9] update: tftp: dfu: Extend update_tftp() function to support DFU   Lukasz Majewski
    • [U-Boot] [PATCH v2 6/9] update: tftp: dfu: Extend update_tftp() function to support DFU   Simon Glass
• [U-Boot] [PATCH v2 5/9] dfu: tftp: update: Add dfu_write_from_mem_addr() function   Simon Glass
  • [U-Boot] [PATCH v2 5/9] dfu: tftp: update: Add dfu_write_from_mem_addr() function   Joe Hershberger
  • [U-Boot] [PATCH v2 5/9] dfu: tftp: update: Add dfu_write_from_mem_addr() function   Lukasz Majewski
• [U-Boot] [PATCH v2 7/9] dfu: command: Extend "dfu" command to handle receiving data via TFTP   Simon Glass
  • [U-Boot] [PATCH v2 7/9] dfu: command: Extend "dfu" command to handle receiving data via TFTP   Joe Hershberger
• [U-Boot] [PATCH v2 8/9] config: bbb: Configs necessary for running update via TFTP on Beagle Bone Black   Simon Glass
  • [U-Boot] [PATCH v2 8/9] config: bbb: Configs necessary for running update via TFTP on Beagle Bone Black   Joe Hershberger
• [U-Boot] [PATCH v2 9/9] dfu:tests: Modify dfu_gadget_test.sh to accept USB device major:minor number   Simon Glass
  • [U-Boot] [PATCH v2 9/9] dfu:tests: Modify dfu_gadget_test.sh to accept USB device major:minor number   Joe Hershberger
• [U-Boot] [Patch v2] lib/fdtdec: Fix fdt_addr_t and fdt_size_t typedef   Simon Glass
  • [U-Boot] [Patch v2] lib/fdtdec: Fix fdt_addr_t and fdt_size_t typedef   York Sun
• [U-Boot] [PATCH 1/5] power: pfuze100 correct SWBST macro definition   Simon Glass
• [U-Boot] [PATCH 4/5] power: regulator: add pfuze100 support   Simon Glass
  • [U-Boot] [PATCH 4/5] power: regulator: add pfuze100 support   Peng Fan
    • [U-Boot] [PATCH 4/5] power: regulator: add pfuze100 support   Peng Fan
      • [U-Boot] [PATCH 4/5] power: regulator: add pfuze100 support   Simon Glass
      • [U-Boot] [PATCH 4/5] power: regulator: add pfuze100 support   Przemyslaw Marczak
      • [U-Boot] [PATCH 4/5] power: regulator: add pfuze100 support   Peng Fan
• [U-Boot] [PATCH 5/5] fsl: common: pfuze: no use original pfuze code if DM_PMIC   Simon Glass
• [U-Boot] [PATCH 3/5] power: pmic: pfuze100 support driver model   Simon Glass
  • [U-Boot] [PATCH 3/5] power: pmic: pfuze100 support driver model   Przemyslaw Marczak
    • [U-Boot] [PATCH 3/5] power: pmic: pfuze100 support driver model   Peng Fan
• [U-Boot] [PATCH 2/5] power: regulator use node name when no regulator-name   Simon Glass
  • [U-Boot] [PATCH 2/5] power: regulator use node name when no regulator-name   Peng Fan
    • [U-Boot] [PATCH 2/5] power: regulator use node name when no regulator-name   Przemyslaw Marczak
      • [U-Boot] [PATCH 2/5] power: regulator use node name when no regulator-name   Peng Fan
• [U-Boot] [PATCH 2/5] x86: fsp: Reserve different malloc size before relocation   Simon Glass
  • [U-Boot] [PATCH 2/5] x86: fsp: Reserve different malloc size before relocation   Bin Meng
• [U-Boot] [PATCH 3/5] x86: queensbay: Support pre-relocation dm pci   Simon Glass
  • [U-Boot] [PATCH 3/5] x86: queensbay: Support pre-relocation dm pci   Bin Meng
    • [U-Boot] [PATCH 3/5] x86: queensbay: Support pre-relocation dm pci   Simon Glass
      • [U-Boot] [PATCH 3/5] x86: queensbay: Support pre-relocation dm pci   Bin Meng
      • [U-Boot] [PATCH 3/5] x86: queensbay: Support pre-relocation dm pci   Simon Glass
      • [U-Boot] [PATCH 3/5] x86: queensbay: Support pre-relocation dm pci   Bin Meng
• [U-Boot] [PATCH 4/5] x86: Explicitly trigger pci bus configuration with driver model   Simon Glass
  • [U-Boot] [PATCH 4/5] x86: Explicitly trigger pci bus configuration with driver model   Bin Meng
    • [U-Boot] [PATCH 4/5] x86: Explicitly trigger pci bus configuration with driver model   Simon Glass
      • [U-Boot] [PATCH 4/5] x86: Explicitly trigger pci bus configuration with driver model   Bin Meng
      • [U-Boot] [PATCH 4/5] x86: Explicitly trigger pci bus configuration with driver model   Simon Glass
      • [U-Boot] [PATCH 4/5] x86: Explicitly trigger pci bus configuration with driver model   Bin Meng
      • [U-Boot] [PATCH 4/5] x86: Explicitly trigger pci bus configuration with driver model   Simon Glass
• [U-Boot] board_pci_pre_scan() and board_pci_post_scan()   Simon Glass
  • [U-Boot] board_pci_pre_scan() and board_pci_post_scan()   Bin Meng
    • [U-Boot] board_pci_pre_scan() and board_pci_post_scan()   Simon Glass
      • [U-Boot] board_pci_pre_scan() and board_pci_post_scan()   Bin Meng
• [U-Boot] [PATCH] power: regulator: max77686 correct variable type   Simon Glass
  • [U-Boot] [PATCH] power: regulator: max77686 correct variable type   Przemyslaw Marczak
• [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Marek Vasut
  • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Simon Glass
    • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Marek Vasut
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Simon Glass
    • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Simon Glass
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Marek Vasut
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Simon Glass
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Marek Vasut
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Simon Glass
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Marek Vasut
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Simon Glass
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Marek Vasut
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Simon Glass
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Marek Vasut
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Simon Glass
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Marek Vasut
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Masahiro Yamada
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Marek Vasut
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Simon Glass
      • [U-Boot] [PATCH] dm: core: Add Kconfig for simple bus driver   Simon Glass
• [U-Boot] [PATCH 00/15] socfpga: sequencer.c cleanups   Marek Vasut
  • [U-Boot] [PATCH 03/15] ddr: altera: sequencer: Zap unused params and macros   Marek Vasut
    • [U-Boot] [PATCH 03/15] ddr: altera: sequencer: Zap unused params and macros   Dinh Nguyen
  • [U-Boot] [PATCH 05/15] ddr: altera: sequencer: Wrap ac_rom_init and inst_rom_init   Marek Vasut
    • [U-Boot] [PATCH 05/15] ddr: altera: sequencer: Wrap ac_rom_init and inst_rom_init   Dinh Nguyen
  • [U-Boot] [PATCH 06/15] ddr: altera: sequencer: Wrap RW_MGR_* macros   Marek Vasut
    • [U-Boot] [PATCH 06/15] ddr: altera: sequencer: Wrap RW_MGR_* macros   Dinh Nguyen
  • [U-Boot] [PATCH 09/15] ddr: altera: sequencer: Pluck out IO_* macros from code   Marek Vasut
    • [U-Boot] [PATCH 09/15] ddr: altera: sequencer: Pluck out IO_* macros from code   Dinh Nguyen
  • [U-Boot] [PATCH 10/15] ddr: altera: sequencer: Wrap misc remaining macros   Marek Vasut
    • [U-Boot] [PATCH 10/15] ddr: altera: sequencer: Wrap misc remaining macros   Dinh Nguyen
  • [U-Boot] [PATCH 11/15] ddr: altera: sequencer: Zap VFIFO_SIZE   Marek Vasut
    • [U-Boot] [PATCH 11/15] ddr: altera: sequencer: Zap VFIFO_SIZE   Dinh Nguyen
  • [U-Boot] [PATCH 12/15] ddr: altera: sequencer: Zap SEQ_T(INIT|RESET)_CNTR._VAL   Marek Vasut
    • [U-Boot] [PATCH 12/15] ddr: altera: sequencer: Zap SEQ_T(INIT|RESET)_CNTR._VAL   Dinh Nguyen
  • [U-Boot] [PATCH 14/15] ddr: altera: sequencer: Clean data types   Marek Vasut
    • [U-Boot] [PATCH 14/15] ddr: altera: sequencer: Clean data types   Dinh Nguyen
  • [U-Boot] [PATCH 15/15] ddr: altera: sequencer: Clean checkpatch issues   Marek Vasut
    • [U-Boot] [PATCH 15/15] ddr: altera: sequencer: Clean checkpatch issues   Dinh Nguyen
• [U-Boot] [PATCH 01/15] ddr: altera: sequencer: Move qts-generated files to board dir   Marek Vasut
  • [U-Boot] [PATCH 01/15] ddr: altera: sequencer: Move qts-generated files to board dir   Dinh Nguyen
• [U-Boot] [PATCH 02/15] ddr: altera: sequencer: Clean up mach/sdram.h   Marek Vasut
  • [U-Boot] [PATCH 02/15] ddr: altera: sequencer: Clean up mach/sdram.h   Dinh Nguyen
• [U-Boot] [PATCH 04/15] ddr: altera: sequencer: Zap bogus redefinition of RW_MGR_MEM_NUMBER_OF_RANKS   Marek Vasut
  • [U-Boot] [PATCH 04/15] ddr: altera: sequencer: Zap bogus redefinition of RW_MGR_MEM_NUMBER_OF_RANKS   Dinh Nguyen
• [U-Boot] [PATCH 07/15] ddr: altera: sequencer: Pluck out RW_MGR_* macros from code   Marek Vasut
  • [U-Boot] [PATCH 07/15] ddr: altera: sequencer: Pluck out RW_MGR_* macros from code   Dinh Nguyen
• [U-Boot] [PATCH 08/15] ddr: altera: sequencer: Wrap IO_* macros   Marek Vasut
  • [U-Boot] [PATCH 08/15] ddr: altera: sequencer: Wrap IO_* macros   Dinh Nguyen
• [U-Boot] [PATCH 13/15] ddr: altera: sequencer: Pluck out misc macros from code   Marek Vasut
  • [U-Boot] [PATCH 13/15] ddr: altera: sequencer: Pluck out misc macros from code   Dinh Nguyen
    • [U-Boot] [PATCH 13/15] ddr: altera: sequencer: Pluck out misc macros from code   Marek Vasut
• [U-Boot] [PATCH] sf: Make 4K sector support configurable   Marek Vasut
  • [U-Boot] [PATCH] sf: Make 4K sector support configurable   Jagan Teki
    • [U-Boot] [PATCH] sf: Make 4K sector support configurable   Jagan Teki
      • [U-Boot] [PATCH] sf: Make 4K sector support configurable   Marek Vasut
• [U-Boot] [PATCH 2/7] x86: Sanity test on vesa parameters before setting up kernel screen_info   Simon Glass
• [U-Boot] [PATCH 3/7] x86: minnowmax: Remove smsc47x superio codes   Simon Glass
• [U-Boot] [PATCH 4/7] x86: baytrail: Update UPD setting for FSP Gold4 release   Simon Glass
• [U-Boot] [PATCH 5/7] x86: Add microcode for BayTrail-I B0 stepping   Simon Glass
• [U-Boot] [PATCH 6/7] x86: Add Intel Bayley Bay board support   Simon Glass
• [U-Boot] [PATCH v2 03/47] dm: serial: Correct logic in serial_find_console_or_panic()   Simon Glass
• [U-Boot] [PATCH v2 06/47] Allow objcopy to work without filling gaps with 0xff   Simon Glass
• [U-Boot] [PATCH v2 08/47] x86: Add various minor tidy-ups to the 32-bit startup code   Simon Glass
• [U-Boot] [PATCH v2 09/47] x86: Use CR0 constants in CPU init   Simon Glass
• [U-Boot] [PATCH v2 12/47] x86: Drop unused copy_fdt_to_ram()   Simon Glass
• [U-Boot] [PATCH v2 13/47] x86: Tidy up the 64-bit calling code   Simon Glass
• [U-Boot] [PATCH v2 14/47] x86: Add some missing global_data declarations in files that use gd   Simon Glass
• [U-Boot] [PATCH v2 16/47] pci: Use debug() instead of DEBUGF() in pci_auto.c   Simon Glass
• [U-Boot] [PATCH v2 21/47] efi: Display the correct initcall pre-relocation values   Simon Glass
• [U-Boot] [PATCH 01/15] pci: Add a constant for an invalid interrupt   Simon Glass
• [U-Boot] [PATCH 02/15] pci: Indicate prefetchable memory allocate when debugging   Simon Glass
• [U-Boot] [PATCH 03/15] dm: Add a return value comment to device_get_child()   Simon Glass
• [U-Boot] [PATCH 06/15] x86: Move Chrome OS options to defconfig   Simon Glass
• [U-Boot] [PATCH 07/15] x86: Move CONFIG_X86_SERIAL to Kconfig   Simon Glass
• [U-Boot] [PATCH 09/15] x86: Drop CONFIG_DCACHE_RAM_MRC_VAR_SIZE from header file   Simon Glass
• [U-Boot] [PATCH 10/15] x86: dts: Fix typo in intel, irq-router.txt   Simon Glass
• [U-Boot] [PATCH 13/15] x86: minnowmax: Drop the old PCI settings   Simon Glass
• [U-Boot] [PATCH 15/15] x86: Update README to explain booting Ubuntu on Minnowmax   Simon Glass
• [U-Boot] [PATCH v2] x86: Enable debug UART for Minnowmax   Simon Glass
  • [U-Boot] [PATCH v2] x86: Enable debug UART for Minnowmax   Simon Glass
• [U-Boot] [PATCH 0/5] x86: Move x86 to use board_init_f_mem() instead of assembler   Simon Glass
  • [U-Boot] [PATCH 3/5] Allow arch-specific setting of global_data in board_init_f_mem()   Simon Glass
    • [U-Boot] [PATCH 3/5] Allow arch-specific setting of global_data in board_init_f_mem()   York Sun
    • [U-Boot] [PATCH 3/5] Allow arch-specific setting of global_data in board_init_f_mem()   Bin Meng
      • [U-Boot] [PATCH 3/5] Allow arch-specific setting of global_data in board_init_f_mem()   Simon Glass
• [U-Boot] [PATCH 1/5] x86: Remove init_gd() function   Simon Glass
  • [U-Boot] [PATCH 1/5] x86: Remove init_gd() function   Bin Meng
• [U-Boot] [PATCH 2/5] Align global_data to a 16-byte boundary   Simon Glass
  • [U-Boot] [PATCH 2/5] Align global_data to a 16-byte boundary   Bin Meng
• [U-Boot] [PATCH 4/5] x86: Move the GDT into global_data   Simon Glass
  • [U-Boot] [PATCH 4/5] x86: Move the GDT into global_data   Bin Meng
• [U-Boot] [PATCH 5/5] x86: Switch to using generic global_data setup   Simon Glass
  • [U-Boot] [PATCH 5/5] x86: Switch to using generic global_data setup   Bin Meng
    • [U-Boot] [PATCH 5/5] x86: Switch to using generic global_data setup   Simon Glass
• [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Simon Glass
  • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Stephen Warren
    • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Simon Glass
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Tom Rini
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Simon Glass
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Stephen Warren
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Simon Glass
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Stephen Warren
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Simon Glass
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Michal Suchanek
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Stephen Warren
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Stephen Warren
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Simon Glass
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Bin Meng
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Thierry Reding
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Bin Meng
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Thierry Reding
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Bin Meng
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Michal Suchanek
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Bin Meng
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Simon Glass
      • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Simon Glass
  • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Bin Meng
  • [U-Boot] [PATCH] Revert "fdt: Fix fdtdec_get_addr_size() for 64-bit"   Thierry Reding
• [U-Boot] [PATCH v2 1/3] x86: Convert minnowmax to use CONFIG_DM_NET   Simon Glass
  • [U-Boot] [PATCH v2 3/3] x86: Show the un-relocated IP address in exceptions   Simon Glass
    • [U-Boot] [PATCH v2 3/3] x86: Show the un-relocated IP address in exceptions   Tom Rini
    • [U-Boot] [PATCH v2 3/3] x86: Show the un-relocated IP address in exceptions   Bin Meng
  • [U-Boot] [PATCH v2 1/3] x86: Convert minnowmax to use CONFIG_DM_NET   Bin Meng
• [U-Boot] [PATCH v2 2/3] x86: Convert minnowmax to use CONFIG_DM_USB   Simon Glass
  • [U-Boot] [PATCH v2 2/3] x86: Convert minnowmax to use CONFIG_DM_USB   Bin Meng
• [U-Boot] [PATCH] armv8: fsl-lsch3: Rewrite MMU translation table entries   Huan Wang
• [U-Boot] [PATCH] arm:ls1021a: Reserve secure code into RAM instead of OCRAM   Huan Wang
  • [U-Boot] [PATCH] arm:ls1021a: Reserve secure code into RAM instead of OCRAM   York Sun
• [U-Boot] [PATCH v2] armv8: fsl-lsch3: Rewrite MMU translation table entries   Alison Wang
  • [U-Boot] [PATCH v2] armv8: fsl-lsch3: Rewrite MMU translation table entries   York Sun
    • [U-Boot] [PATCH v2] armv8: fsl-lsch3: Rewrite MMU translation table entries   Huan Wang
      • [U-Boot] [PATCH v2] armv8: fsl-lsch3: Rewrite MMU translation table entries   York Sun
• [U-Boot] target TQM834x giving build error with gcc v4.9   Kushwaha Prabhakar
• [U-Boot] [PATCH v2 1/3] common: Display >=4GiB memory bank size   Bin Meng
  • [U-Boot] [PATCH v2 2/3] pci: Remove DEBUG from pci_compat.c   Bin Meng
    • [U-Boot] [PATCH v2 2/3] pci: Remove DEBUG from pci_compat.c   Simon Glass
      • [U-Boot] [PATCH v2 2/3] pci: Remove DEBUG from pci_compat.c   Simon Glass
  • [U-Boot] [PATCH v2 3/3] x86: Document how to write PIRQ information in the device tree   Bin Meng
    • [U-Boot] [PATCH v2 3/3] x86: Document how to write PIRQ information in the device tree   Simon Glass
      • [U-Boot] [PATCH v2 3/3] x86: Document how to write PIRQ information in the device tree   Simon Glass
  • [U-Boot] [PATCH v2 1/3] common: Display >=4GiB memory bank size   Simon Glass
    • [U-Boot] [PATCH v2 1/3] common: Display >=4GiB memory bank size   Simon Glass
  • [U-Boot] [PATCH v2 1/3] common: Display >=4GiB memory bank size   Bin Meng
    • [U-Boot] [PATCH v2 1/3] common: Display >=4GiB memory bank size   Bin Meng
• [U-Boot] [PATCH V3] kconfig: add config option for shell prompt   Nikita Kiryanov
  • [U-Boot] [PATCH V3] kconfig: add config option for shell prompt   Nikita Kiryanov
  • [U-Boot] [U-Boot, V3] kconfig: add config option for shell prompt   Tom Rini
    • [U-Boot] [U-Boot, V3] kconfig: add config option for shell prompt   York Sun
      • [U-Boot] [U-Boot, V3] kconfig: add config option for shell prompt   Tom Rini
      • [U-Boot] [U-Boot, V3] kconfig: add config option for shell prompt   yamada.masahiro at socionext.com
• [U-Boot] [PATCH 1/4] imx: clock support enet2 anatop clock support   Peng Fan
  • [U-Boot] [PATCH 2/4] net: fec: do not access reserved register for i.MX6UL   Peng Fan
    • [U-Boot] [PATCH 2/4] net: fec: do not access reserved register for i.MX6UL   Nikolay Dimitrov
      • [U-Boot] [PATCH 2/4] net: fec: do not access reserved register for i.MX6UL   Peng Fan
      • [U-Boot] [PATCH 2/4] net: fec: do not access reserved register for i.MX6UL   Nikolay Dimitrov
      • [U-Boot] [PATCH 2/4] net: fec: do not access reserved register for i.MX6UL   Stefano Babic
      • [U-Boot] [PATCH 2/4] net: fec: do not access reserved register for i.MX6UL   Peng Fan
      • [U-Boot] [PATCH 2/4] net: fec: do not access reserved register for i.MX6UL   Stefano Babic
  • [U-Boot] [PATCH 3/4] comment: net: Add CMD_MII in Kconfig   Peng Fan
    • [U-Boot] [PATCH 3/4] comment: net: Add CMD_MII in Kconfig   Joe Hershberger
  • [U-Boot] [PATCH 4/4] imx: mx6ul_14x14_evk add ENET support   Peng Fan
    • [U-Boot] [PATCH 4/4] imx: mx6ul_14x14_evk add ENET support   Fabio Estevam
      • [U-Boot] [PATCH 4/4] imx: mx6ul_14x14_evk add ENET support   Peng Fan
      • [U-Boot] [PATCH 4/4] imx: mx6ul_14x14_evk add ENET support   Stefano Babic
      • [U-Boot] [PATCH 4/4] imx: mx6ul_14x14_evk add ENET support   Peng Fan
  • [U-Boot] [PATCH 1/4] imx: clock support enet2 anatop clock support   Fabio Estevam
  • [U-Boot] [PATCH 1/4] imx: clock support enet2 anatop clock support   Stefano Babic
    • [U-Boot] [PATCH 1/4] imx: clock support enet2 anatop clock support   Peng Fan
• [U-Boot] [PATCH] udoo: Switch to SPL support   vpeter4
  • [U-Boot] [PATCH] udoo: Switch to SPL support   Stefano Babic
  • [U-Boot] [PATCH] udoo: Switch to SPL support   Fabio Estevam
    • [U-Boot] [PATCH] udoo: Switch to SPL support   Stefano Babic
  • [U-Boot] [PATCH] udoo: Switch to SPL support   Peter Vicman
  • [U-Boot] [PATCH] udoo: Switch to SPL support   Robert Nelson
    • [U-Boot] [PATCH] udoo: Switch to SPL support   Otavio Salvador
  • [U-Boot] [PATCH] udoo: Switch to SPL support   Peter Vicman
  • [U-Boot] [PATCH] udoo: Switch to SPL support   Peter Vicman
    • [U-Boot] [PATCH] udoo: Switch to SPL support   Stefano Babic
• [U-Boot] [PATCH] configs: zynqmp: Enable networking by default for EP108   Michal Simek
• [U-Boot] [PATCH 0/2] ARM: exynos: reorganize SoC code   Thomas Abraham
  • [U-Boot] [PATCH 1/2] ARM: exynos: move SoC sources to mach-exynos   Thomas Abraham
    • [U-Boot] [PATCH 1/2] ARM: exynos: move SoC sources to mach-exynos   Masahiro Yamada
      • [U-Boot] [PATCH 1/2] ARM: exynos: move SoC sources to mach-exynos   Simon Glass
  • [U-Boot] [PATCH 2/2] ARM: exynos: fix regression for Origen4210   Thomas Abraham
  • [U-Boot] [PATCH 0/2] ARM: exynos: reorganize SoC code   Przemyslaw Marczak
  • [U-Boot] [PATCH 0/2] ARM: exynos: reorganize SoC code   Minkyu Kang
• [U-Boot] [PATCH 25/55] dm: pmic: max77686: Correct a few nits   Simon Glass
• [U-Boot] [PATCH 04/15] dm: pci: Provide friendly config access functions   Simon Glass
• [U-Boot] [PATCH 28/55] dm: pmic: max77686: Support all BUCK regulators   Simon Glass
• [U-Boot] [PATCH v2 00/19] dm: exynos: Driver model improvements leading to spring support   Simon Glass
  • [U-Boot] [PATCH v2 01/19] exynos: dts: Correct LDO and BUCK naming   Simon Glass
    • [U-Boot] [PATCH v2 01/19] exynos: dts: Correct LDO and BUCK naming   Simon Glass
  • [U-Boot] [PATCH v2 02/19] video: Work around lack of pinctrl   Simon Glass
    • [U-Boot] [PATCH v2 02/19] video: Work around lack of pinctrl   Simon Glass
  • [U-Boot] [PATCH v2 03/19] dm: i2c: Add support for multiplexed I2C buses   Simon Glass
    • [U-Boot] [PATCH v2 03/19] dm: i2c: Add support for multiplexed I2C buses   Simon Glass
  • [U-Boot] [PATCH v2 04/19] i2c: Add a mux for GPIO-based I2C bus arbitration   Simon Glass
    • [U-Boot] [PATCH v2 04/19] i2c: Add a mux for GPIO-based I2C bus arbitration   Simon Glass
  • [U-Boot] [PATCH v2 05/19] dm: cros_ec: Convert the I2C tunnel code to use driver model   Simon Glass
    • [U-Boot] [PATCH v2 05/19] dm: cros_ec: Convert the I2C tunnel code to use driver model   Simon Glass
  • [U-Boot] [PATCH v2 06/19] cros_ec: Support the LDO access method used by spring   Simon Glass
    • [U-Boot] [PATCH v2 06/19] cros_ec: Support the LDO access method used by spring   Simon Glass
  • [U-Boot] [PATCH v2 07/19] dm: pmic: max77686: Support all BUCK regulators   Simon Glass
    • [U-Boot] [PATCH v2 07/19] dm: pmic: max77686: Support all BUCK regulators   Przemyslaw Marczak
    • [U-Boot] [PATCH v2 07/19] dm: pmic: max77686: Support all BUCK regulators   Simon Glass
  • [U-Boot] [PATCH v2 08/19] exynos: dts: Drop the old TPS65090 I2C node   Simon Glass
    • [U-Boot] [PATCH v2 08/19] exynos: dts: Drop the old TPS65090 I2C node   Simon Glass
  • [U-Boot] [PATCH v2 09/19] exynos: Add common board code for exynos5 boards that use device tree   Simon Glass
    • [U-Boot] [PATCH v2 09/19] exynos: Add common board code for exynos5 boards that use device tree   Przemyslaw Marczak
      • [U-Boot] [PATCH v2 09/19] exynos: Add common board code for exynos5 boards that use device tree   Simon Glass
  • [U-Boot] [PATCH v2 10/19] exynos: Enable new features for exynos5 boards   Simon Glass
    • [U-Boot] [PATCH v2 10/19] exynos: Enable new features for exynos5 boards   Simon Glass
  • [U-Boot] [PATCH v2 11/19] exynos: config: Move common options to the common headers and tidy up   Simon Glass
    • [U-Boot] [PATCH v2 11/19] exynos: config: Move common options to the common headers and tidy up   Simon Glass
  • [U-Boot] [PATCH v2 12/19] exynos: Drop old exynos5420-specific board code   Simon Glass
    • [U-Boot] [PATCH v2 12/19] exynos: Drop old exynos5420-specific board code   Simon Glass
  • [U-Boot] [PATCH v2 13/19] exynos: Drop old exynos5250-specific board code   Simon Glass
    • [U-Boot] [PATCH v2 13/19] exynos: Drop old exynos5250-specific board code   Simon Glass
  • [U-Boot] [PATCH v2 14/19] power: Remove old TPS65090 drivers   Simon Glass
    • [U-Boot] [PATCH v2 14/19] power: Remove old TPS65090 drivers   Simon Glass
  • [U-Boot] [PATCH v2 15/19] cros_ec: Remove the old tunnel code   Simon Glass
    • [U-Boot] [PATCH v2 15/19] cros_ec: Remove the old tunnel code   Simon Glass
  • [U-Boot] [PATCH v2 16/19] video: Remove the old parade driver   Simon Glass
    • [U-Boot] [PATCH v2 16/19] video: Remove the old parade driver   Anatolij Gustschin
    • [U-Boot] [PATCH v2 16/19] video: Remove the old parade driver   Simon Glass
  • [U-Boot] [PATCH v2 17/19] dts: Drop unused compatible ID for the NXP video bridge   Simon Glass
    • [U-Boot] [PATCH v2 17/19] dts: Drop unused compatible ID for the NXP video bridge   Simon Glass
  • [U-Boot] [PATCH v2 18/19] exynos: video: Remove non-device-tree code   Simon Glass
    • [U-Boot] [PATCH v2 18/19] exynos: video: Remove non-device-tree code   Anatolij Gustschin
    • [U-Boot] [PATCH v2 18/19] exynos: video: Remove non-device-tree code   Simon Glass
  • [U-Boot] [PATCH v2 19/19] exynos: Add support for spring   Simon Glass
    • [U-Boot] [PATCH v2 19/19] exynos: Add support for spring   Simon Glass
  • [U-Boot] [PATCH v2 00/19] dm: exynos: Driver model improvements leading to spring support   Przemyslaw Marczak
• [U-Boot] [PATCH 1/6] arm: socfpga: scan: Clean up scan_chain_engine_is_idle()   Marek Vasut
  • [U-Boot] [PATCH 3/6] arm: socfpga: scan: Clean up horrible macros   Marek Vasut
    • [U-Boot] [PATCH 3/6] arm: socfpga: scan: Clean up horrible macros   Dinh Nguyen
  • [U-Boot] [PATCH 4/6] arm: socfpga: scan: Factor out IO chain programming   Marek Vasut
    • [U-Boot] [PATCH 4/6] arm: socfpga: scan: Factor out IO chain programming   Dinh Nguyen
  • [U-Boot] [PATCH 5/6] arm: socfpga: scan: Add code to get FPGA ID   Marek Vasut
  • [U-Boot] [PATCH 6/6] arm: socfpga: misc: Add support for printing FPGA type   Marek Vasut
  • [U-Boot] [PATCH 1/6] arm: socfpga: scan: Clean up scan_chain_engine_is_idle()   Marek Vasut
  • [U-Boot] [PATCH 1/6] arm: socfpga: scan: Clean up scan_chain_engine_is_idle()   Dinh Nguyen
    • [U-Boot] [PATCH 1/6] arm: socfpga: scan: Clean up scan_chain_engine_is_idle()   Marek Vasut
  • [U-Boot] [PATCH 1/6] arm: socfpga: scan: Clean up scan_chain_engine_is_idle()   Marek Vasut
• [U-Boot] [PATCH 2/6] arm: socfpga: scan: Introduce generic JTAG accessor   Marek Vasut
  • [U-Boot] [PATCH 2/6] arm: socfpga: scan: Introduce generic JTAG accessor   Dinh Nguyen
• [U-Boot] [PATCH] dm: usb: fix USB Ethernet without CONFIG_DM_ETH regression   Marcel Ziswiler
  • [U-Boot] [PATCH] dm: usb: fix USB Ethernet without CONFIG_DM_ETH regression   Marek Vasut
  • [U-Boot] [PATCH] dm: usb: fix USB Ethernet without CONFIG_DM_ETH regression   Simon Glass
    • [U-Boot] [PATCH] dm: usb: fix USB Ethernet without CONFIG_DM_ETH regression   Marcel Ziswiler
• [U-Boot] [PATCH 000/172] socfpga: SPL and DDR init   Dinh Nguyen
  • [U-Boot] [PATCH 000/172] socfpga: SPL and DDR init   Marek Vasut
• [U-Boot] [ANN] U-Boot v2015.10-rc1 released   Tom Rini
  • [U-Boot] [ANN] U-Boot v2015.10-rc1 released   Wolfgang Denk
• [U-Boot] [PATCH] dm: usb: fix missing errno include regression   Marcel Ziswiler
  • [U-Boot] [PATCH] dm: usb: fix missing errno include regression   Simon Glass
    • [U-Boot] [PATCH] dm: usb: fix missing errno include regression   Marcel Ziswiler
    • [U-Boot] [PATCH] dm: usb: fix missing errno include regression   Simon Glass
• [U-Boot] SPL with DM for serial   Michal Simek
  • [U-Boot] SPL with DM for serial   Simon Glass
• [U-Boot] CONFIG_DM_ETH USB_ETHER_ASIX Reception Issue on Tegra   Marcel Ziswiler
  • [U-Boot] CONFIG_DM_ETH USB_ETHER_ASIX Reception Issue on Tegra   Marek Vasut
    • [U-Boot] CONFIG_DM_ETH USB_ETHER_ASIX Reception Issue on Tegra   Marcel Ziswiler
      • [U-Boot] CONFIG_DM_ETH USB_ETHER_ASIX Reception Issue on Tegra   Marek Vasut
      • [U-Boot] CONFIG_DM_ETH USB_ETHER_ASIX Reception Issue on Tegra   Marcel Ziswiler
      • [U-Boot] CONFIG_DM_ETH USB_ETHER_ASIX Reception Issue on Tegra   Simon Glass
      • [U-Boot] CONFIG_DM_ETH USB_ETHER_ASIX Reception Issue on Tegra   Marcel Ziswiler
      • [U-Boot] CONFIG_DM_ETH USB_ETHER_ASIX Reception Issue on Tegra   Simon Glass
      • [U-Boot] CONFIG_DM_ETH USB_ETHER_ASIX Reception Issue on Tegra   Marek Vasut
  • [U-Boot] CONFIG_DM_ETH USB_ETHER_ASIX Reception Issue on Tegra   Simon Glass
• [U-Boot] [PATCH v2 22/47] efi: Add a serial driver   Bin Meng
• [U-Boot] [PATCH v2 24/47] x86: Set up toolchain flags for running as EFI application   Bin Meng
• [U-Boot] [PATCH v2 25/47] efi: Support building a u-boot.efi executable   Bin Meng
  • [U-Boot] [PATCH v2 25/47] efi: Support building a u-boot.efi executable   Simon Glass
• [U-Boot] [PATCH] arm: socfpga: Move generated files into qts subdir   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Fix FPGA bitstream programming routine   Marek Vasut
• [U-Boot] [PATCH] arm: dts: socfpga: Add mmc alias   Marek Vasut
• [U-Boot] [PATCH] arm: dts: socfpga: Fix SPI aliases   Marek Vasut
• [U-Boot] [PATCH 2/2] net: designware: Rename the driver var name to eth_designware   Marek Vasut
  • [U-Boot] [PATCH 2/2] net: designware: Rename the driver var name to eth_designware   Joe Hershberger
    • [U-Boot] [PATCH 2/2] net: designware: Rename the driver var name to eth_designware   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Add temporary workaround for missing SD/MMC patches   Marek Vasut
• [U-Boot] [PATCH 1/2] net: designware: Add SoCFPGA GMAC DT compatible string   Joe Hershberger
  • [U-Boot] [PATCH 1/2] net: designware: Add SoCFPGA GMAC DT compatible string   Marek Vasut
• [U-Boot] driver model is not smp safe   Simon Glass
  • [U-Boot] driver model is not smp safe   Tom Rini
    • [U-Boot] driver model is not smp safe   Simon Glass
      • [U-Boot] driver model is not smp safe   Bin Meng
      • [U-Boot] driver model is not smp safe   Simon Glass
      • [U-Boot] driver model is not smp safe   Bin Meng
• [U-Boot] MinnowBoard Max uboot   Simon Glass
  • [U-Boot] MinnowBoard Max uboot   Beaman, Thomas
• [U-Boot] [Patch v3 1/2] lib/fdtdec: Fix fdt_addr_t and fdt_size_t typedef   York Sun
  • [U-Boot] [Patch v3 2/2] lib/fdtdec: Fix compiling warning caused by changing fdt_addr_t type   York Sun
    • [U-Boot] [Patch v3 2/2] lib/fdtdec: Fix compiling warning caused by changing fdt_addr_t type   Simon Glass
  • [U-Boot] [Patch v3 1/2] lib/fdtdec: Fix fdt_addr_t and fdt_size_t typedef   Simon Glass
• [U-Boot] [PATCH v3 0/5] lpc32xx: add legacy NXP BSP drivers   slemieux.tyco at gmail.com
• [U-Boot] [PATCH v3 1/5] dma: lpc32xx: add DMA driver   slemieux.tyco at gmail.com
  • [U-Boot] [PATCH v3 1/5] dma: lpc32xx: add DMA driver   Marek Vasut
• [U-Boot] [PATCH v3 2/5] nand: lpc32xx: add hardware ECC support   slemieux.tyco at gmail.com
• [U-Boot] [PATCH v3 3/5] nand: lpc32xx: add ECC layout for small page NAND   slemieux.tyco at gmail.com
• [U-Boot] [PATCH v3 4/5] i2c: lpc32xx: add support for OTG I2C   slemieux.tyco at gmail.com
• [U-Boot] [PATCH v3 5/5] usb: lpc32xx: add host USB driver   slemieux.tyco at gmail.com
  • [U-Boot] [PATCH v3 5/5] usb: lpc32xx: add host USB driver   Marek Vasut
• [U-Boot] [PATCH] configs: ti_armv7_keystone2: replace addr_uboot with loadaddr   Vitaly Andrianov
  • [U-Boot] [PATCH] configs: ti_armv7_keystone2: replace addr_uboot with loadaddr   Tom Rini
• [U-Boot] [PATCH 06/13][v4] imx: system counter driver for imx7d and mx6ul   Alonso Adrian
• [U-Boot] [PATCH v3 0/8] assortment of fixes/enhancements   Marcel Ziswiler
  • [U-Boot] [PATCH v3 1/8] fs/fs.c: read up to EOF when len would read past EOF   Marcel Ziswiler
  • [U-Boot] [PATCH v3 3/8] generic-board: allow showing custom board info   Marcel Ziswiler
  • [U-Boot] [PATCH v3 4/8] logos: add Toradex logo   Marcel Ziswiler
  • [U-Boot] [PATCH v3 5/8] colibri_vf: remove spurious new line   Marcel Ziswiler
    • [U-Boot] [PATCH v3 5/8] colibri_vf: remove spurious new line   Marek Vasut
  • [U-Boot] [PATCH v3 6/8] image-fdt.c: store returned error value   Marcel Ziswiler
  • [U-Boot] [PATCH v3 7/8] mtd/nand/ubi: assortment of alignment fixes   Marcel Ziswiler
    • [U-Boot] [PATCH v3 7/8] mtd/nand/ubi: assortment of alignment fixes   Scott Wood
  • [U-Boot] [PATCH v3 8/8] tftp.c: fix CONFIG_TFTP_TSIZE for small files   Marcel Ziswiler
• [U-Boot] [PATCH v3 2/8] net: asix: fix operation without eeprom   Marcel Ziswiler
  • [U-Boot] [PATCH v3 2/8] net: asix: fix operation without eeprom   Marek Vasut
    • [U-Boot] [PATCH v3 2/8] net: asix: fix operation without eeprom   Marcel Ziswiler
      • [U-Boot] [PATCH v3 2/8] net: asix: fix operation without eeprom   Marek Vasut
      • [U-Boot] [PATCH v3 2/8] net: asix: fix operation without eeprom   Marcel Ziswiler
• [U-Boot] [PATCH 1/5] sunxi: display: Replace #ifdef-ery with helper functions   Hans de Goede
  • [U-Boot] [PATCH 2/5] sunxi: display: Correct clk_delay calculations for lcd displays   Hans de Goede
    • [U-Boot] [PATCH 2/5] sunxi: display: Correct clk_delay calculations for lcd displays   Ian Campbell
  • [U-Boot] [PATCH 3/5] sunxi: display: Add a few extra register and constant defines   Hans de Goede
    • [U-Boot] [PATCH 3/5] sunxi: display: Add a few extra register and constant defines   Ian Campbell
      • [U-Boot] [PATCH 3/5] sunxi: display: Add a few extra register and constant defines   Hans de Goede
  • [U-Boot] [PATCH 4/5] sunxi: display: Add support for interlaced modes   Hans de Goede
    • [U-Boot] [PATCH 4/5] sunxi: display: Add support for interlaced modes   Ian Campbell
      • [U-Boot] [PATCH 4/5] sunxi: display: Add support for interlaced modes   Hans de Goede
  • [U-Boot] [PATCH 5/5] sunxi: display: Add composite video out support   Hans de Goede
    • [U-Boot] [PATCH 5/5] sunxi: display: Add composite video out support   Ian Campbell
  • [U-Boot] [PATCH 1/5] sunxi: display: Replace #ifdef-ery with helper functions   Ian Campbell
• [U-Boot] Booting a second stage Bootloader in FIT image   KJ H. Kiran
  • [U-Boot] Booting a second stage Bootloader in FIT image   KJ H. Kiran
    • [U-Boot] Booting a second stage Bootloader in FIT image   Simon Glass
• [U-Boot] [PATCH v4 0/8] assortment of fixes/enhancements   Marcel Ziswiler
  • [U-Boot] [PATCH v5] fs/fs.c: read up to EOF when len would read past EOF   Marcel Ziswiler
  • [U-Boot] [PATCH v5] net: asix: fix operation without eeprom   Marcel Ziswiler
    • [U-Boot] [PATCH v5] net: asix: fix operation without eeprom   Joe Hershberger
  • [U-Boot] [PATCH v5] generic-board: allow showing custom board info   Marcel Ziswiler
  • [U-Boot] [PATCH v5] logos: add Toradex logo   Marcel Ziswiler
  • [U-Boot] [PATCH v5] colibri_vf: remove spurious new line   Marcel Ziswiler
  • [U-Boot] [PATCH v5] image-fdt.c: store returned error value   Marcel Ziswiler
  • [U-Boot] [PATCH v5] mtd/nand/ubi: assortment of alignment fixes   Marcel Ziswiler
  • [U-Boot] [PATCH v5] tftp.c: fix CONFIG_TFTP_TSIZE for small files   Marcel Ziswiler
    • [U-Boot] [PATCH v5] tftp.c: fix CONFIG_TFTP_TSIZE for small files   Joe Hershberger
• [U-Boot] [PATCH] arm: ls1021a: Ensure Generic Timer disabled before jumping into the OS   Alison Wang
  • [U-Boot] [PATCH] arm: ls1021a: Ensure Generic Timer disabled before jumping into the OS   York Sun
  • [U-Boot] arm: ls1021a: Ensure Generic Timer disabled before jumping into the OS   Alexander Stein
• [U-Boot] [PATCH 02/12] input: TWL4030 input support for power button, USB and charger   Tom Rini
  • [U-Boot] [PATCH 02/12] input: TWL4030 input support for power button, USB and charger   Paul Kocialkowski
• [U-Boot] [PATCH 03/12] input: twl4030: Keypad scan and input   Tom Rini
• [U-Boot] [PATCH 01/12] power: twl4030: Power off support   Tom Rini
  • [U-Boot] [PATCH 01/12] power: twl4030: Power off support   Fabio Estevam
  • [U-Boot] [PATCH 01/12] power: twl4030: Power off support   Przemyslaw Marczak
  • [U-Boot] [PATCH 01/12] power: twl4030: Power off support   Paul Kocialkowski
• [U-Boot] [PATCH 04/12] omap3: Reboot mode support   Tom Rini
• [U-Boot] [PATCH 07/12] sniper: Serial number support, obtained from die ID   Tom Rini
  • [U-Boot] [PATCH 07/12] sniper: Serial number support, obtained from die ID   Paul Kocialkowski
    • [U-Boot] [PATCH 07/12] sniper: Serial number support, obtained from die ID   Tom Rini
      • [U-Boot] [PATCH 07/12] sniper: Serial number support, obtained from die ID   Paul Kocialkowski
      • [U-Boot] [PATCH 07/12] sniper: Serial number support, obtained from die ID   Tom Rini
      • [U-Boot] [PATCH 07/12] sniper: Serial number support, obtained from die ID   Paul Kocialkowski
      • [U-Boot] [PATCH 07/12] sniper: Serial number support, obtained from die ID   Tom Rini
      • [U-Boot] [PATCH 07/12] sniper: Serial number support, obtained from die ID   Paul Kocialkowski
• [U-Boot] [PATCH 06/12] sniper: OMAP3 reboot mode support   Tom Rini
• [U-Boot] [PATCH 09/12] sniper: Fastboot support   Tom Rini
• [U-Boot] [PATCH 10/12] sniper: Power button reset support   Tom Rini
• [U-Boot] [PATCH 08/12] sniper: Pass serial number through ATAG   Tom Rini
• [U-Boot] [PATCH 11/12] sniper: Power off when the power on reason is not a valid one   Tom Rini
• [U-Boot] [PATCH 12/12] sniper: Keypad support, with recovery and fastboot key combinations   Tom Rini
• [U-Boot] [PATCH 05/12] LG Optimus Black (P970) codename sniper support   Tom Rini
• [U-Boot] [PATCH v2 26/47] x86: Support skipping relocation for EFI   Bin Meng
• [U-Boot] [PATCH v2 28/47] x86: Add support for U-Boot as an EFI application   Bin Meng
• [U-Boot] [PATCH v2 29/47] x86: Add EFI board code   Bin Meng
• [U-Boot] [PATCH v2 30/47] x86: dts: Add a device tree file for EFI   Bin Meng
• [U-Boot] [PATCH v2 32/47] x86: Add definitions for the x86-efi board and plumb it in   Bin Meng
  • [U-Boot] [PATCH v2 32/47] x86: Add definitions for the x86-efi board and plumb it in   Simon Glass
    • [U-Boot] [PATCH v2 32/47] x86: Add definitions for the x86-efi board and plumb it in   Simon Glass
• [U-Boot] [PATCH V2 0/6] power: pfuze100: support driver model and regulator   Peng Fan
  • [U-Boot] [PATCH V2 1/6] power: pfuze100 correct SWBST macro definition   Peng Fan
  • [U-Boot] [PATCH V2 2/6] power: regulator use node name when no regulator-name   Peng Fan
  • [U-Boot] [PATCH V2 3/6] power: regulator: update comments for regulator-name   Peng Fan
    • [U-Boot] [PATCH V2 3/6] power: regulator: update comments for regulator-name   Przemyslaw Marczak
      • [U-Boot] [PATCH V2 3/6] power: regulator: update comments for regulator-name   Peng Fan
  • [U-Boot] [PATCH V2 4/6] power: pmic: pfuze100 support driver model   Peng Fan
    • [U-Boot] [PATCH V2 4/6] power: pmic: pfuze100 support driver model   Przemyslaw Marczak
  • [U-Boot] [PATCH V2 5/6] power: regulator: add pfuze100 support   Peng Fan
    • [U-Boot] [PATCH V2 5/6] power: regulator: add pfuze100 support   Przemyslaw Marczak
      • [U-Boot] [PATCH V2 5/6] power: regulator: add pfuze100 support   Simon Glass
      • [U-Boot] [PATCH V2 5/6] power: regulator: add pfuze100 support   Peng Fan
      • [U-Boot] [PATCH V2 5/6] power: regulator: add pfuze100 support   Peng Fan
  • [U-Boot] [PATCH V2 6/6] fsl: common: pfuze: no use original pfuze code if DM_PMIC   Peng Fan
• [U-Boot] [PATCH v2 33/47] x86: Add relocation and link script for a 64-bit EFI application   Bin Meng
• [U-Boot] [PATCH v2 34/47] efi: Add support for loading U-Boot through an EFI stub   Bin Meng
• [U-Boot] [PATCH v3 2/4] ARM: cache: add an empty stub function for invalidate/flush dcache   Josh Wu
  • [U-Boot] [PATCH v3 2/4] ARM: cache: add an empty stub function for invalidate/flush dcache   York Sun
    • [U-Boot] [PATCH v3 2/4] ARM: cache: add an empty stub function for invalidate/flush dcache   Josh Wu
• [U-Boot] [PATCH v2 35/47] x86: Support building the EFI stub   Bin Meng
  • [U-Boot] [PATCH v2 35/47] x86: Support building the EFI stub   Simon Glass
• [U-Boot] [PATCH v2 36/47] x86: Add an enum for some commonly-used GDT bits   Bin Meng
• [U-Boot] [PATCH v2 37/47] x86: Add a way to call 32-bit code from 64-bit mode   Bin Meng
• [U-Boot] [PATCH v2] ARM: zynq: drop "optional" from board select in favor of ZC702   Michal Simek
  • [U-Boot] [PATCH v2] ARM: zynq: drop "optional" from board select in favor of ZC702   Michal Simek
• [U-Boot] support for GPIO expander MAX7304   priyanka sharma
• [U-Boot] [PATCH v2 38/47] efi: Add 64-bit payload support   Bin Meng
• [U-Boot] [PATCH] board: Xilinx: zynqmp: Define checkboard() function   Siva Durga Prasad Paladugu
  • [U-Boot] [PATCH] board: Xilinx: zynqmp: Define checkboard() function   Michal Simek
• [U-Boot] [PATCH v2 39/47] x86: Add support for passing tables into U-Boot   Bin Meng
• [U-Boot] [PATCH 1/3] zynqmp: usb: Add usb dwc3 driver support for zynqmp   Siva Durga Prasad Paladugu
  • [U-Boot] [PATCH 3/3] usb: zynqmp: Enable USB XHCI support   Siva Durga Prasad Paladugu
  • [U-Boot] [PATCH 1/3] zynqmp: usb: Add usb dwc3 driver support for zynqmp   Michal Simek
• [U-Boot] [PATCH 2/3] usb: zynqmp: Add XHCI driver support   Siva Durga Prasad Paladugu
  • [U-Boot] [PATCH 2/3] usb: zynqmp: Add XHCI driver support   Marek Vasut
• [U-Boot] [PATCH v2 41/47] efi: Add a command to display the memory map   Bin Meng
• [U-Boot] [PATCH v2 42/47] x86: Handle running as EFI payload   Bin Meng
• [U-Boot] [PATCH v2 00/47] Add support for running U-Boot as an EFI payload/application   Bin Meng
  • [U-Boot] [PATCH v2 00/47] Add support for running U-Boot as an EFI payload/application   Simon Glass
    • [U-Boot] [PATCH v2 00/47] Add support for running U-Boot as an EFI payload/application   Simon Glass
      • [U-Boot] [PATCH v2 00/47] Add support for running U-Boot as an EFI payload/application   Simon Glass
• [U-Boot] [RFC PATCH] efi: Another way to create u-boot payload for EFI   Bin Meng
• [U-Boot] [PATCH 2/2] Tegra: PLL: use per-SoC pllinfo table instead of PLL_DIVM/N/P, etc.   Marcel Ziswiler
  • [U-Boot] [PATCH 2/2] Tegra: PLL: use per-SoC pllinfo table instead of PLL_DIVM/N/P, etc.   Tom Warren
    • [U-Boot] [PATCH 2/2] Tegra: PLL: use per-SoC pllinfo table instead of PLL_DIVM/N/P, etc.   Marcel Ziswiler
  • [U-Boot] [PATCH 2/2] Tegra: PLL: use per-SoC pllinfo table instead of PLL_DIVM/N/P, etc.   Simon Glass
• [U-Boot] [PATCH 0/2] ARM: tegra: enable GPU DT node   Alexandre Courbot
  • [U-Boot] [PATCH 0/2] ARM: tegra: enable GPU DT node   Andreas Färber
    • [U-Boot] [PATCH 0/2] ARM: tegra: enable GPU DT node   Tom Warren
    • [U-Boot] [PATCH 0/2] ARM: tegra: enable GPU DT node   Tom Warren
      • [U-Boot] [PATCH 0/2] ARM: tegra: enable GPU DT node   Alexandre Courbot
      • [U-Boot] [PATCH 0/2] ARM: tegra: enable GPU DT node   Tom Warren
• [U-Boot] [PATCH] arm: cache: Implement cache range check for v7   Marek Vasut
• [U-Boot] [PATCH 0/3] nand: Sync with Linux v4.1   Stefan Roese
  • [U-Boot] [PATCH 0/3] nand: Sync with Linux v4.1   Scott Wood
    • [U-Boot] [PATCH 0/3] nand: Sync with Linux v4.1   Stefan Roese
      • [U-Boot] [PATCH 0/3] nand: Sync with Linux v4.1   Tom Rini
      • [U-Boot] [PATCH 0/3] nand: Sync with Linux v4.1   Scott Wood
• [U-Boot] [RESEND PATCH] common/lcd_console: fix console/logo regression   Marcel Ziswiler
  • [U-Boot] [RESEND PATCH] common/lcd_console: fix console/logo regression   Simon Glass
    • [U-Boot] [RESEND PATCH] common/lcd_console: fix console/logo regression   Marcel Ziswiler
      • [U-Boot] [RESEND PATCH] common/lcd_console: fix console/logo regression   Anatolij Gustschin
  • [U-Boot] [U-Boot, RESEND] common/lcd_console: fix console/logo regression   Tom Rini
• [U-Boot] [PATCH v2 0/10] usb: MUSB gadget config provisions   Hans de Goede
  • [U-Boot] [PATCH v2 01/10] usb: USB_ARCH_HAS_HCD Kconfig option removal   Hans de Goede
  • [U-Boot] [PATCH v2 02/10] usb: Generic USB Kconfig option, that fits both host and gadget and comments   Hans de Goede
  • [U-Boot] [PATCH v2 03/10] usb: musb-new: CONFIG_MUSB prefix replacement with CONFIG_USB_MUSB   Hans de Goede
  • [U-Boot] [PATCH v2 04/10] usb: musb-new: Kconfig support for USB_MUSB_HOST and USB_MUSB_GADGET   Hans de Goede
  • [U-Boot] [PATCH v2 05/10] sunxi: usb: USB_MUSB_SUNXI move to musb-new Kconfig   Hans de Goede
  • [U-Boot] [PATCH v2 06/10] sunxi: config update to stick with Kconfig changes   Hans de Goede
  • [U-Boot] [PATCH v2 07/10] musb: sunxi: Force EP0 on re-enable   Hans de Goede
  • [U-Boot] [PATCH v2 08/10] sunxi: MUSB gadget config provisions, with fastboot and USB mass storage support   Hans de Goede
  • [U-Boot] [PATCH v2 09/10] usb: USB storage-specific part ifdef in uclass   Hans de Goede
  • [U-Boot] [PATCH v2 10/10] sunxi: Drop our own copy of the USB_KEYBOARD options   Hans de Goede
  • [U-Boot] [PATCH v2 0/10] usb: MUSB gadget config provisions   Marek Vasut
    • [U-Boot] [PATCH v2 0/10] usb: MUSB gadget config provisions   Paul Kocialkowski
• [U-Boot] [PATCH 0/2] configs: ti_armv7_keystone2: fix default args_ramfs   Vitaly Andrianov
  • [U-Boot] [PATCH 1/2] configs: ti_armv7_keystone2: fix initrd address at args_ramfs   Vitaly Andrianov
    • [U-Boot] [PATCH 1/2] configs: ti_armv7_keystone2: fix initrd address at args_ramfs   Tom Rini
      • [U-Boot] [PATCH 1/2] configs: ti_armv7_keystone2: fix initrd address at args_ramfs   Vitaly Andrianov
      • [U-Boot] [PATCH 1/2] configs: ti_armv7_keystone2: fix initrd address at args_ramfs   Tom Rini
    • [U-Boot] [U-Boot, 1/2] configs: ti_armv7_keystone2: fix initrd address at args_ramfs   Tom Rini
  • [U-Boot] [PATCH 2/2] configs: ti_armv7_keystone2: increase size reserved for initrd   Vitaly Andrianov
    • [U-Boot] [U-Boot, 2/2] configs: ti_armv7_keystone2: increase size reserved for initrd   Tom Rini
• [U-Boot] [PATCH 1/2] qe: transform parameter to compatible type   York Sun
• [U-Boot] [PATCH 2/2] qe: use strncpy instead of strcpy   York Sun
• [U-Boot] [PATCH] LS1021atwr: Enable bootscript for secure boot   York Sun
• [U-Boot] [PATCH] ls1021atwr: added deep sleep support in uboot   York Sun
• [U-Boot] [PATCH] arm: ls1021atwr: program the regulator for deep sleep   York Sun
• [U-Boot] [PATCH] arm/layerscape: Fix non-boot cpus cannot correctly fall in spin table   York Sun
• [U-Boot] [PATCH] arm: ls1021a: allow OCRAM access permission as R/W in SPL   York Sun
• [U-Boot] [PATCH] ls1021a: etsec: Enable Tx Data and TxBD snooping   York Sun
• [U-Boot] [PATCH 1/3] crypto/fsl - disable RNG oscillator maximum frequency check   York Sun
• [U-Boot] [PATCH 2/3] crypto/fsl - change starting entropy delay value   York Sun
• [U-Boot] [PATCH 3/3] crypto/fsl - enable raw data instead of von Neumann data   York Sun
• [U-Boot] [PATCH] drivers/fsl-mc: flib changes for mc 8.0.0   York Sun
• [U-Boot] [PATCH 1/2][V2] pci: Add function to find an extended capability   York Sun
• [U-Boot] [PATCH 2/2][V2] pci/layerscape: Add EP mode support   York Sun
• [U-Boot] [PATCH 1/3] crypto/fsl: fix "era" property value on LE platforms   York Sun
• [U-Boot] [PATCH 2/3] crypto/fsl: fix snooping for write transactions   York Sun
• [U-Boot] [PATCH 3/3] crypto/fsl: clean-up - use fdt_setprop_u32 helper   York Sun
• [U-Boot] [PATCH] drivers/ddr/fsl: Adjust bstopre value   York Sun
• [U-Boot] [PATCH 1/4][v2] config: lsch3: Define CONFIG_SYS_CACHELINE_SIZE for LS2085A   York Sun
• [U-Boot] [PATCH 2/4][v2] config: lsch3: Define USB XHCI controller base address for LS2085A   York Sun
• [U-Boot] [PATCH 3/4][v2] config: ls2085aqds: Add USB support for ls2085aqds   York Sun
• [U-Boot] [PATCH 4/4][v2] config: ls2085ardb: Add USB support for ls2085ardb   York Sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
  • [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] [PATCH] Do not mux and setup SPI if disabled in the config   Clemens Gruber
  • [U-Boot] [PATCH] Do not mux and setup SPI if disabled in the config   Stefan Roese
    • [U-Boot] [PATCH] Do not mux and setup SPI if disabled in the config   Clemens Gruber
      • [U-Boot] [PATCH] Do not mux and setup SPI if disabled in the config   Stefan Roese
      • [U-Boot] [PATCH] Do not mux and setup SPI if disabled in the config   Jagan Teki
      • [U-Boot] [PATCH] Do not mux and setup SPI if disabled in the config   Clemens Gruber
      • [U-Boot] [PATCH] Do not mux and setup SPI if disabled in the config   Stefan Roese
      • [U-Boot] [PATCH] Do not mux and setup SPI if disabled in the config   Clemens Gruber
      • [U-Boot] [PATCH] Do not mux and setup SPI if disabled in the config   Stefan Roese
• [U-Boot] [PATCH v3 00/28] Add support for running U-Boot as an EFI payload/application   Simon Glass
  • [U-Boot] [PATCH v3 01/28] Add a way to skip relocation   Simon Glass
    • [U-Boot] [PATCH v3 01/28] Add a way to skip relocation   Bin Meng
      • [U-Boot] [PATCH v3 01/28] Add a way to skip relocation   Simon Glass
  • [U-Boot] [PATCH v3 02/28] efi: Add a serial driver   Simon Glass
    • [U-Boot] [PATCH v3 02/28] efi: Add a serial driver   Simon Glass
  • [U-Boot] [PATCH v3 03/28] efi: Drop CONFIG_SYS_TEXT_BASE for EFI   Simon Glass
    • [U-Boot] [PATCH v3 03/28] efi: Drop CONFIG_SYS_TEXT_BASE for EFI   Simon Glass
  • [U-Boot] [PATCH v3 04/28] x86: Set up toolchain flags for running as EFI application   Simon Glass
    • [U-Boot] [PATCH v3 04/28] x86: Set up toolchain flags for running as EFI application   Bin Meng
      • [U-Boot] [PATCH v3 04/28] x86: Set up toolchain flags for running as EFI application   Simon Glass
  • [U-Boot] [PATCH v3 05/28] efi: Support building a u-boot-app.efi executable   Simon Glass
    • [U-Boot] [PATCH v3 05/28] efi: Support building a u-boot-app.efi executable   Bin Meng
      • [U-Boot] [PATCH v3 05/28] efi: Support building a u-boot-app.efi executable   Simon Glass
  • [U-Boot] [PATCH v3 06/28] x86: Support skipping relocation for EFI   Simon Glass
    • [U-Boot] [PATCH v3 06/28] x86: Support skipping relocation for EFI   Bin Meng
      • [U-Boot] [PATCH v3 06/28] x86: Support skipping relocation for EFI   Simon Glass
  • [U-Boot] [PATCH v3 07/28] x86: Add asm/elf.h for x86-specific ELF definitions   Simon Glass
    • [U-Boot] [PATCH v3 07/28] x86: Add asm/elf.h for x86-specific ELF definitions   Simon Glass
  • [U-Boot] [PATCH v3 08/28] x86: Add support for U-Boot as an EFI application   Simon Glass
    • [U-Boot] [PATCH v3 08/28] x86: Add support for U-Boot as an EFI application   Bin Meng
      • [U-Boot] [PATCH v3 08/28] x86: Add support for U-Boot as an EFI application   Simon Glass
  • [U-Boot] [PATCH v3 09/28] x86: Add EFI board code   Simon Glass
    • [U-Boot] [PATCH v3 09/28] x86: Add EFI board code   Bin Meng
      • [U-Boot] [PATCH v3 09/28] x86: Add EFI board code   Simon Glass
  • [U-Boot] [PATCH v3 10/28] x86: dts: Add a device tree file for EFI   Simon Glass
    • [U-Boot] [PATCH v3 10/28] x86: dts: Add a device tree file for EFI   Bin Meng
      • [U-Boot] [PATCH v3 10/28] x86: dts: Add a device tree file for EFI   Simon Glass
  • [U-Boot] [PATCH v3 11/28] x86: Allow relocation code to build without text base   Simon Glass
    • [U-Boot] [PATCH v3 11/28] x86: Allow relocation code to build without text base   Simon Glass
  • [U-Boot] [PATCH v3 12/28] x86: Add definitions for the x86-efi board and plumb it in   Simon Glass
  • [U-Boot] [PATCH v3 13/28] x86: Add relocation and link script for a 64-bit EFI application   Simon Glass
    • [U-Boot] [PATCH v3 13/28] x86: Add relocation and link script for a 64-bit EFI application   Simon Glass
  • [U-Boot] [PATCH v3 14/28] efi: Add support for loading U-Boot through an EFI stub   Simon Glass
    • [U-Boot] [PATCH v3 14/28] efi: Add support for loading U-Boot through an EFI stub   Bin Meng
      • [U-Boot] [PATCH v3 14/28] efi: Add support for loading U-Boot through an EFI stub   Simon Glass
  • [U-Boot] [PATCH v3 15/28] x86: Support building the EFI stub   Simon Glass
    • [U-Boot] [PATCH v3 15/28] x86: Support building the EFI stub   Bin Meng
      • [U-Boot] [PATCH v3 15/28] x86: Support building the EFI stub   Simon Glass
  • [U-Boot] [PATCH v3 16/28] x86: Add an enum for some commonly-used GDT bits   Simon Glass
    • [U-Boot] [PATCH v3 16/28] x86: Add an enum for some commonly-used GDT bits   Simon Glass
  • [U-Boot] [PATCH v3 17/28] x86: Add a way to call 32-bit code from 64-bit mode   Simon Glass
    • [U-Boot] [PATCH v3 17/28] x86: Add a way to call 32-bit code from 64-bit mode   Simon Glass
  • [U-Boot] [PATCH v3 18/28] efi: Add 64-bit payload support   Simon Glass
    • [U-Boot] [PATCH v3 18/28] efi: Add 64-bit payload support   Bin Meng
      • [U-Boot] [PATCH v3 18/28] efi: Add 64-bit payload support   Simon Glass
  • [U-Boot] [PATCH v3 19/28] x86: Add support for passing tables into U-Boot   Simon Glass
    • [U-Boot] [PATCH v3 19/28] x86: Add support for passing tables into U-Boot   Simon Glass
  • [U-Boot] [PATCH v3 20/28] efi: Add functions for decoding the EFI tables   Simon Glass
    • [U-Boot] [PATCH v3 20/28] efi: Add functions for decoding the EFI tables   Simon Glass
  • [U-Boot] [PATCH v3 21/28] efi: Add a command to display the memory map   Simon Glass
    • [U-Boot] [PATCH v3 21/28] efi: Add a command to display the memory map   Simon Glass
  • [U-Boot] [PATCH v3 22/28] x86: Handle running as EFI payload   Simon Glass
    • [U-Boot] [PATCH v3 22/28] x86: Handle running as EFI payload   Simon Glass
  • [U-Boot] [PATCH v3 23/28] x86: Add helper code for running from EFI   Simon Glass
    • [U-Boot] [PATCH v3 23/28] x86: Add helper code for running from EFI   Simon Glass
  • [U-Boot] [PATCH v3 24/28] x86: baytrail: Support operation as an EFI payload   Simon Glass
    • [U-Boot] [PATCH v3 24/28] x86: baytrail: Support operation as an EFI payload   Simon Glass
  • [U-Boot] [PATCH v3 25/28] x86: qemu: Support operation as an EFI payload   Simon Glass
    • [U-Boot] [PATCH v3 25/28] x86: qemu: Support operation as an EFI payload   Bin Meng
      • [U-Boot] [PATCH v3 25/28] x86: qemu: Support operation as an EFI payload   Simon Glass
  • [U-Boot] [PATCH v3 26/28] x86: Gracefully disable the vesa driver when running from EFI   Simon Glass
    • [U-Boot] [PATCH v3 26/28] x86: Gracefully disable the vesa driver when running from EFI   Simon Glass
  • [U-Boot] [PATCH v3 27/28] efi: Add a README to explain how things work   Simon Glass
    • [U-Boot] [PATCH v3 27/28] efi: Add a README to explain how things work   Simon Glass
  • [U-Boot] [PATCH v3 28/28] Allow device tree relocation to be disabled   Simon Glass
    • [U-Boot] [PATCH v3 28/28] Allow device tree relocation to be disabled   Simon Glass
      • [U-Boot] [PATCH v3 28/28] Allow device tree relocation to be disabled   Bin Meng
      • [U-Boot] [PATCH v3 28/28] Allow device tree relocation to be disabled   Simon Glass
• [U-Boot] [PATCH v4 0/5] lpc32xx: add legacy NXP BSP drivers   slemieux.tyco at gmail.com
• [U-Boot] [PATCH v4 1/5] dma: lpc32xx: add DMA driver   slemieux.tyco at gmail.com
  • [U-Boot] [PATCH v4 1/5] dma: lpc32xx: add DMA driver   Marek Vasut
    • [U-Boot] [PATCH v4 1/5] dma: lpc32xx: add DMA driver   LEMIEUX, SYLVAIN
      • [U-Boot] [PATCH v4 1/5] dma: lpc32xx: add DMA driver   Marek Vasut
• [U-Boot] [PATCH v4 2/5] nand: lpc32xx: add hardware ECC support   slemieux.tyco at gmail.com
• [U-Boot] [PATCH v4 3/5] nand: lpc32xx: add ECC layout for small page NAND   slemieux.tyco at gmail.com
• [U-Boot] [PATCH v4 4/5] i2c: lpc32xx: add support for OTG I2C   slemieux.tyco at gmail.com
  • [U-Boot] [PATCH v4 4/5] i2c: lpc32xx: add support for OTG I2C   Marek Vasut
  • [U-Boot] [U-Boot,v4,4/5] i2c: lpc32xx: add support for OTG I2C   Tom Rini
• [U-Boot] [PATCH v4 5/5] usb: lpc32xx: add host USB driver   slemieux.tyco at gmail.com
  • [U-Boot] [PATCH v4 5/5] usb: lpc32xx: add host USB driver   Marek Vasut
    • [U-Boot] [PATCH v4 5/5] usb: lpc32xx: add host USB driver   LEMIEUX, SYLVAIN
      • [U-Boot] [PATCH v4 5/5] usb: lpc32xx: add host USB driver   Marek Vasut
• [U-Boot] [PATCH] sunxi: Enable musb in host mode on the Jesurun Q5   Hans de Goede
  • [U-Boot] [PATCH] sunxi: Enable musb in host mode on the Jesurun Q5   Ian Campbell
    • [U-Boot] [PATCH] sunxi: Enable musb in host mode on the Jesurun Q5   Hans de Goede
• [U-Boot] [PATCH] usb: Fix device detection code   Marek Vasut
  • [U-Boot] [PATCH] usb: Fix device detection code   Hans de Goede
    • [U-Boot] [PATCH] usb: Fix device detection code   Marek Vasut
• [U-Boot] [PATCH] ddr: altera: sequencer: add RW_MGR_MEM_NUMBER_OF_RANKS   dinguyen at opensource.altera.com
  • [U-Boot] [PATCH] ddr: altera: sequencer: add RW_MGR_MEM_NUMBER_OF_RANKS   Marek Vasut
    • [U-Boot] [PATCH] ddr: altera: sequencer: add RW_MGR_MEM_NUMBER_OF_RANKS   Dinh Nguyen
      • [U-Boot] [PATCH] ddr: altera: sequencer: add RW_MGR_MEM_NUMBER_OF_RANKS   Marek Vasut
  • [U-Boot] [PATCH] ddr: altera: sequencer: add RW_MGR_MEM_NUMBER_OF_RANKS   Marek Vasut
• [U-Boot] [PATCH 1/2] arm/ls1021a: Add sata support on qds and twr board   B29983 at freescale.com
  • [U-Boot] [PATCH 2/2] arm/ls2085a: Add sata support on qds and rdb board   B29983 at freescale.com
  • [U-Boot] [PATCH 1/2] arm/ls1021a: Add sata support on qds and twr board   Huan Wang
    • [U-Boot] [PATCH 1/2] arm/ls1021a: Add sata support on qds and twr board   Yuantian Tang
• [U-Boot] [PATCH] Tegra: spi: Move TEGRA114_SPI switch to defconfigs   Jagan Teki
  • [U-Boot] [PATCH] Tegra: spi: Move TEGRA114_SPI switch to defconfigs   Tom Warren
    • [U-Boot] [PATCH] Tegra: spi: Move TEGRA114_SPI switch to defconfigs   Jagan Teki
• [U-Boot] [PATCH 1/6] spi: omap3_spi: add am43xx support to omap3_spi   Jagan Teki
• [U-Boot] [PATCH 2/6] arm: am43xx: enable spi clock   Jagan Teki
• [U-Boot] [PATCH 1/5] sf: sf_dataflash: Remove inline property of function dataflash_status   Jagan Teki
• [U-Boot] [PATCH] arm: mx6: Remove SPI support from WRU-IV baseboard   Stefan Roese
  • [U-Boot] [PATCH] arm: mx6: Remove SPI support from WRU-IV baseboard   Stefano Babic
    • [U-Boot] [PATCH] arm: mx6: Remove SPI support from WRU-IV baseboard   Clemens Gruber
      • [U-Boot] [PATCH] arm: mx6: Remove SPI support from WRU-IV baseboard   Stefano Babic
      • [U-Boot] [PATCH] arm: mx6: Remove SPI support from WRU-IV baseboard   Jagan Teki
  • [U-Boot] [PATCH] arm: mx6: Remove SPI support from WRU-IV baseboard   Jagan Teki
  • [U-Boot] [PATCH] arm: mx6: Remove SPI support from WRU-IV baseboard   Stefano Babic
• [U-Boot] [PATCH] udoo: Remove SPL fat support   Peter Vicman
  • [U-Boot] [PATCH] udoo: Remove SPL fat support   Stefano Babic
  • [U-Boot] [PATCH] udoo: Remove SPL fat support   Fabio Estevam
  • [U-Boot] [PATCH] udoo: Remove SPL fat support   Stefano Babic
• [U-Boot] [PATCH] ARM: zynqmp: Add platform specific arch_get_page_table   Michal Simek
• [U-Boot] [PATCH] tegra: pll: fix pllx cpcon in pllinfo table for t20/t30   Marcel Ziswiler
  • [U-Boot] [PATCH] tegra: pll: fix pllx cpcon in pllinfo table for t20/t30   Tom Warren
    • [U-Boot] [PATCH] tegra: pll: fix pllx cpcon in pllinfo table for t20/t30   Marcel Ziswiler
      • [U-Boot] [PATCH] tegra: pll: fix pllx cpcon in pllinfo table for t20/t30   Tom Warren
      • [U-Boot] [PATCH] tegra: pll: fix pllx cpcon in pllinfo table for t20/t30   Stephen Warren
• [U-Boot] [PATCH v2] dm: usb: fix USB Ethernet without CONFIG_DM_ETH regression   Marcel Ziswiler
  • [U-Boot] [PATCH v2] dm: usb: fix USB Ethernet without CONFIG_DM_ETH regression   Marek Vasut
    • [U-Boot] [PATCH v2] dm: usb: fix USB Ethernet without CONFIG_DM_ETH regression   Marcel Ziswiler
      • [U-Boot] [PATCH v2] dm: usb: fix USB Ethernet without CONFIG_DM_ETH regression   Marek Vasut
  • [U-Boot] [PATCH v2] dm: usb: fix USB Ethernet without CONFIG_DM_ETH regression   Simon Glass
    • [U-Boot] [PATCH v2] dm: usb: fix USB Ethernet without CONFIG_DM_ETH regression   Marcel Ziswiler
    • [U-Boot] [PATCH v2] dm: usb: fix USB Ethernet without CONFIG_DM_ETH regression   Simon Glass
• [U-Boot] [PATCH 1/1] arm: mxs: make inline function compatible for GCC 5   Jörg Krause
• [U-Boot] [RESEND PATCH v5] fs/fs.c: read up to EOF when len would read past EOF   Marcel Ziswiler
  • [U-Boot] [RESEND PATCH v5] net: asix: fix operation without eeprom   Marcel Ziswiler
    • [U-Boot] [RESEND PATCH v5] net: asix: fix operation without eeprom   Marek Vasut
  • [U-Boot] [RESEND PATCH v5] generic-board: allow showing custom board info   Marcel Ziswiler
    • [U-Boot] [U-Boot, RESEND, v5] generic-board: allow showing custom board info   Tom Rini
  • [U-Boot] [RESEND PATCH v5] logos: add Toradex logo   Marcel Ziswiler
    • [U-Boot] [RESEND PATCH v5] logos: add Toradex logo   Tom Rini
  • [U-Boot] [RESEND PATCH v5] colibri_vf: remove spurious new line   Marcel Ziswiler
    • [U-Boot] [U-Boot, RESEND, v5] colibri_vf: remove spurious new line   Tom Rini
  • [U-Boot] [RESEND PATCH v5] image-fdt.c: store returned error value   Marcel Ziswiler
    • [U-Boot] [U-Boot, RESEND, v5] image-fdt.c: store returned error value   Tom Rini
  • [U-Boot] [RESEND PATCH v5] mtd/nand/ubi: assortment of alignment fixes   Marcel Ziswiler
    • [U-Boot] [U-Boot, RESEND, v5] mtd/nand/ubi: assortment of alignment fixes   Tom Rini
      • [U-Boot] [U-Boot, RESEND, v5] mtd/nand/ubi: assortment of alignment fixes   Marcel Ziswiler
  • [U-Boot] [RESEND PATCH v5] tftp.c: fix CONFIG_TFTP_TSIZE for small files   Marcel Ziswiler
    • [U-Boot] [RESEND PATCH v5] tftp.c: fix CONFIG_TFTP_TSIZE for small files   Joe Hershberger
    • [U-Boot] [RESEND PATCH v5] tftp.c: fix CONFIG_TFTP_TSIZE for small files   Joe Hershberger
  • [U-Boot] [U-Boot, RESEND, v5] fs/fs.c: read up to EOF when len would read past EOF   Tom Rini
• [U-Boot] [PATCH 0/3] sunxi: display: Add overscan correction   Hans de Goede
  • [U-Boot] [PATCH 1/3] cfbconsole: Remove width argument from the logo functions   Hans de Goede
    • [U-Boot] [PATCH 1/3] cfbconsole: Remove width argument from the logo functions   Anatolij Gustschin
  • [U-Boot] [PATCH 2/3] cfbconsole: Add support for stride != width   Hans de Goede
    • [U-Boot] [PATCH 2/3] cfbconsole: Add support for stride != width   Anatolij Gustschin
  • [U-Boot] [PATCH 3/3] sunxi: display: Add overscan correction   Hans de Goede
    • [U-Boot] [PATCH 3/3] sunxi: display: Add overscan correction   Ian Campbell
      • [U-Boot] [PATCH 3/3] sunxi: display: Add overscan correction   Hans de Goede
      • [U-Boot] [PATCH 3/3] sunxi: display: Add overscan correction   Ian Campbell
      • [U-Boot] [PATCH 3/3] sunxi: display: Add overscan correction   Hans de Goede
    • [U-Boot] [PATCH 3/3] sunxi: display: Add overscan correction   Anatolij Gustschin
  • [U-Boot] [PATCH 0/3] sunxi: display: Add overscan correction   Anatolij Gustschin
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
  • [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
    • [U-Boot] [PULL] u-boot-usb/master   Tom Rini
      • [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH] ARM: tegra: p2571: remove another unused define   Stephen Warren
  • [U-Boot] [PATCH] ARM: tegra: p2571: remove another unused define   Simon Glass
• [U-Boot] [PATCH] configs: Remove CONFIG_SERIAL_MULTI   Stephen Warren
  • [U-Boot] [PATCH] configs: Remove CONFIG_SERIAL_MULTI   Tom Rini
• [U-Boot] [PATCH V4 1/2] ARM: tegra: Add e2220-1170 board   Stephen Warren
  • [U-Boot] [PATCH V4 2/2] ARM: tegra: Add p2371-0000 board   Stephen Warren
    • [U-Boot] [PATCH V4 2/2] ARM: tegra: Add p2371-0000 board   Simon Glass
  • [U-Boot] [PATCH V4 1/2] ARM: tegra: Add e2220-1170 board   Tom Warren
    • [U-Boot] [PATCH V4 1/2] ARM: tegra: Add e2220-1170 board   Stephen Warren
• [U-Boot] [PATCH v5 1/5] dma: lpc32xx: add DMA driver   slemieux.tyco at gmail.com
  • [U-Boot] [PATCH v5 1/5] dma: lpc32xx: add DMA driver   Marek Vasut
  • [U-Boot] [PATCH v5 1/5] dma: lpc32xx: add DMA driver   Vladimir Zapolskiy
    • [U-Boot] [PATCH v5 1/5] dma: lpc32xx: add DMA driver   LEMIEUX, SYLVAIN
      • [U-Boot] [PATCH v5 1/5] dma: lpc32xx: add DMA driver   Vladimir Zapolskiy
      • [U-Boot] [PATCH v5 1/5] dma: lpc32xx: add DMA driver   LEMIEUX, SYLVAIN
• [U-Boot] [PATCH v5 2/5] nand: lpc32xx: add hardware ECC support   slemieux.tyco at gmail.com
  • [U-Boot] [PATCH v5 2/5] nand: lpc32xx: add hardware ECC support   Vladimir Zapolskiy
• [U-Boot] [PATCH v5 3/5] nand: lpc32xx: add ECC layout for small page NAND   slemieux.tyco at gmail.com
• [U-Boot] [PATCH v5 5/5] usb: lpc32xx: add host USB driver   slemieux.tyco at gmail.com
  • [U-Boot] [PATCH v5 5/5] usb: lpc32xx: add host USB driver   Marek Vasut
  • [U-Boot] [PATCH v5 5/5] usb: lpc32xx: add host USB driver   Vladimir Zapolskiy
    • [U-Boot] [PATCH v5 5/5] usb: lpc32xx: add host USB driver   Marek Vasut
    • [U-Boot] [PATCH v5 5/5] usb: lpc32xx: add host USB driver   LEMIEUX, SYLVAIN
      • [U-Boot] [PATCH v5 5/5] usb: lpc32xx: add host USB driver   Vladimir Zapolskiy
• [U-Boot] [PATCH] ARM: tegra: restrict usable RAM size further   Stephen Warren
  • [U-Boot] [PATCH] ARM: tegra: restrict usable RAM size further   Tom Warren
    • [U-Boot] [PATCH] ARM: tegra: restrict usable RAM size further   Stephen Warren
      • [U-Boot] [PATCH] ARM: tegra: restrict usable RAM size further   Tom Warren
• [U-Boot] GCC 5.2 issue on imx28   Jörg Krause
  • [U-Boot] GCC 5.2 issue on imx28   Måns Rullgård
    • [U-Boot] GCC 5.2 issue on imx28   Jörg Krause
      • [U-Boot] GCC 5.2 issue on imx28   Måns Rullgård
  • [U-Boot] GCC 5.2 issue on imx28   Tom Rini
• [U-Boot] [PATCH] Tegra: Allow TZ writes to VPR aperature regs   Stephen Warren
  • [U-Boot] [PATCH] Tegra: Allow TZ writes to VPR aperature regs   Tom Warren
• [U-Boot] [PATCH 1/3][v2] imx: usb: ehci-mx6: reg accessor cleanups   Adrian Alonso
  • [U-Boot] [PATCH 2/3][v2] imx: usb: ehci-mx6: document board specific functions   Adrian Alonso
    • [U-Boot] [PATCH 2/3][v2] imx: usb: ehci-mx6: document board specific functions   Marek Vasut
  • [U-Boot] [PATCH 3/3][v2] imx: usb: ehci-mx6: add usb support for imx7d soc   Adrian Alonso
    • [U-Boot] [PATCH 3/3][v2] imx: usb: ehci-mx6: add usb support for imx7d soc   Marek Vasut
  • [U-Boot] [PATCH 1/3][v2] imx: usb: ehci-mx6: reg accessor cleanups   Marek Vasut
• [U-Boot] [PATCH] net: lpc32xx: correct command register reset value   Vladimir Zapolskiy
  • [U-Boot] [PATCH] net: lpc32xx: correct command register reset value   Joe Hershberger
• [U-Boot] [PATCH] net: lpc32xx: connect MAC to phy with CONFIG_PHY_ADDR id   Vladimir Zapolskiy
  • [U-Boot] [PATCH] net: lpc32xx: connect MAC to phy with CONFIG_PHY_ADDR id   Joe Hershberger
  • [U-Boot] [PATCH] net: lpc32xx: connect MAC to phy with CONFIG_PHY_ADDR id   LEMIEUX, SYLVAIN
• [U-Boot] [PATCH v2 09/16] mtd/nand/tegra: alignment workaround   Marcel Ziswiler
  • [U-Boot] [PATCH v2 09/16] mtd/nand/tegra: alignment workaround   Scott Wood
• [U-Boot] [PATCH 0/2] net: lpc32xx: add support to RMII phy   Vladimir Zapolskiy
• [U-Boot] [PATCH v3 00/16] assortment of tegra fixes/enhancements   Marcel Ziswiler
  • [U-Boot] [PATCH v3 01/16] ARM: tegra: allow custom usb manufacturer/product/vendor ids/strings   Marcel Ziswiler
  • [U-Boot] [PATCH v3 02/16] ARM: tegra: allow reading recovery mode boot type   Marcel Ziswiler
  • [U-Boot] [PATCH v3 04/16] colibri_t20: fix device-tree compatible node   Marcel Ziswiler
  • [U-Boot] [PATCH v3 05/16] colibri_t20: add lcd display support   Marcel Ziswiler
  • [U-Boot] [PATCH v3 06/16] colibri_t20: add i2c support   Marcel Ziswiler
  • [U-Boot] [PATCH v3 07/16] colibri_t20: disable PMIC sleep mode on low supply voltage   Marcel Ziswiler
  • [U-Boot] [PATCH v3 08/16] tegra: nand: fix read_byte required for proper onfi detection   Marcel Ziswiler
    • [U-Boot] [PATCH v3 08/16] tegra: nand: fix read_byte required for proper onfi detection   Scott Wood
  • [U-Boot] [PATCH v3 09/16] mtd/nand/tegra: alignment workaround   Marcel Ziswiler
  • [U-Boot] [PATCH v3 10/16] colibri_t20: enable mtdparts support   Marcel Ziswiler
  • [U-Boot] [PATCH v3 11/16] colibri_t20: enable ubi/ubifs support   Marcel Ziswiler
  • [U-Boot] [PATCH v3 12/16] apalis/colibri_t20/t30: increase tftp blocksize   Marcel Ziswiler
  • [U-Boot] [PATCH v3 13/16] apalis/colibri_t20/30: clean-up   Marcel Ziswiler
  • [U-Boot] [PATCH v3 14/16] colibri_t20: fix reset out pin   Marcel Ziswiler
  • [U-Boot] [PATCH v3 15/16] apalis/colibri_t30: fix usb dm regression   Marcel Ziswiler
  • [U-Boot] [PATCH v3 16/16] tegra: nand: disable subpage writes   Marcel Ziswiler
    • [U-Boot] [PATCH v3 16/16] tegra: nand: disable subpage writes   Scott Wood
  • [U-Boot] [PATCH v3 00/16] assortment of tegra fixes/enhancements   Tom Warren
    • [U-Boot] [PATCH v3 00/16] assortment of tegra fixes/enhancements   Marcel Ziswiler
• [U-Boot] [PATCH v3 03/16] apalis/colibri_t20/t30: integrate recovery mode detection   Marcel Ziswiler
• [U-Boot] Wrong release date for v2015.10 on the denx.de   Bin Meng
  • [U-Boot] Wrong release date for v2015.10 on the denx.de   Anatolij Gustschin
  • [U-Boot] Wrong release date for v2015.10 on the denx.de   Wolfgang Denk
• [U-Boot] [PATCH] imx: mx6ul_14x14_evk discard redefined CONFIG_MX6   Peng Fan
  • [U-Boot] [PATCH] imx: mx6ul_14x14_evk discard redefined CONFIG_MX6   Stefano Babic
  • [U-Boot] [PATCH] imx: mx6ul_14x14_evk discard redefined CONFIG_MX6   Stefano Babic
• [U-Boot] [PATCH] imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file   Peng Fan
  • [U-Boot] [PATCH] imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file   Stefano Babic
  • [U-Boot] [PATCH] imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file   Soeren Moch
    • [U-Boot] [PATCH] imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file   Peng Fan
      • [U-Boot] [PATCH] imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file   Soeren Moch
      • [U-Boot] [PATCH] imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file   Stefano Babic
      • [U-Boot] [PATCH] imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file   Marek Vasut
      • [U-Boot] [PATCH] imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file   Masahiro Yamada
• [U-Boot] [PATCH] arm: mvebu/armada100: dram.c: Remove CONFIG_SYS_BOARD_DRAM_INIT   Stefan Roese
• [U-Boot] [PATCH v3] common: Display >=4GiB memory bank size   Bin Meng
  • [U-Boot] [PATCH v3] common: Display >=4GiB memory bank size   Simon Glass
    • [U-Boot] [PATCH v3] common: Display >=4GiB memory bank size   Simon Glass
• [U-Boot] [PATCH] x86: baytrail: Add all IDE/SATA PCI device IDs   Bin Meng
  • [U-Boot] [PATCH] x86: baytrail: Add all IDE/SATA PCI device IDs   Simon Glass
    • [U-Boot] [PATCH] x86: baytrail: Add all IDE/SATA PCI device IDs   Simon Glass
• [U-Boot] [PATCH] arm: armv8 correct value passed to __asm_dcache_all   Peng Fan
• [U-Boot] [PATCH] sunxi: display: Fix composite video out on sun5i   Hans de Goede
  • [U-Boot] [PATCH] sunxi: display: Fix composite video out on sun5i   Ian Campbell
• [U-Boot] [PATCH 1/2] sunxi: dts: Sync with kernel   Hans de Goede
  • [U-Boot] [PATCH 2/2] sunxi: Add support for the Auxtek-T003 HDMI stick   Hans de Goede
    • [U-Boot] [PATCH 2/2] sunxi: Add support for the Auxtek-T003 HDMI stick   Ian Campbell
  • [U-Boot] [PATCH 1/2] sunxi: dts: Sync with kernel   Ian Campbell
• [U-Boot] [PATCH 1/2] sunxi: display: Enable composite video support on more boards   Hans de Goede
  • [U-Boot] [PATCH 2/2] sunxi: display: Disable HDMI support on A13 based tablets   Hans de Goede
    • [U-Boot] [PATCH 2/2] sunxi: display: Disable HDMI support on A13 based tablets   Ian Campbell
  • [U-Boot] [PATCH 1/2] sunxi: display: Enable composite video support on more boards   Ian Campbell
• [U-Boot] [PATCH v1] arm: omap5: Add AMP boot support for OMAP5   Bharat Gohil
  • [U-Boot] [PATCH v1] arm: omap5: Add AMP boot support for OMAP5   Bharat Gohil
    • [U-Boot] [PATCH v1] arm: omap5: Add AMP boot support for OMAP5   Tom Rini
• [U-Boot] Using spi_alloc_slave() from SPL   Fabio Estevam
  • [U-Boot] Using spi_alloc_slave() from SPL   Marek Vasut
  • [U-Boot] Using spi_alloc_slave() from SPL   Stefano Babic
    • [U-Boot] Using spi_alloc_slave() from SPL   Fabio Estevam
      • [U-Boot] Using spi_alloc_slave() from SPL   Marek Vasut
      • [U-Boot] Using spi_alloc_slave() from SPL   Fabio Estevam
      • [U-Boot] Using spi_alloc_slave() from SPL   Stefano Babic
      • [U-Boot] Using spi_alloc_slave() from SPL   Fabio Estevam
      • [U-Boot] Using spi_alloc_slave() from SPL   Fabio Estevam
      • [U-Boot] Using spi_alloc_slave() from SPL   Simon Glass
      • [U-Boot] Using spi_alloc_slave() from SPL   Fabio Estevam
      • [U-Boot] Using spi_alloc_slave() from SPL   Nikolay Dimitrov
      • [U-Boot] Using spi_alloc_slave() from SPL   Marek Vasut
• [U-Boot] [PATCH] x86: WIP: Enable D0 stepping microcode for MinnowMax   Simon Glass
  • [U-Boot] [PATCH] x86: WIP: Enable D0 stepping microcode for MinnowMax   Bin Meng
  • [U-Boot] [PATCH] x86: WIP: Enable D0 stepping microcode for MinnowMax   Andrew Bradford
• [U-Boot] [PATCH] ti_armv7_common: enable setexpr   Nishanth Menon
  • [U-Boot] [PATCH] ti_armv7_common: enable setexpr   Tom Rini
    • [U-Boot] [PATCH] ti_armv7_common: enable setexpr   Nishanth Menon
      • [U-Boot] [PATCH] ti_armv7_common: enable setexpr   Tom Rini
      • [U-Boot] [PATCH] ti_armv7_common: enable setexpr   Vitaly Andrianov
• [U-Boot] [PATCH v3 25/25] rockchip: Add a simple README   Christoph Fritz
  • [U-Boot] [PATCH v3 25/25] rockchip: Add a simple README   Simon Glass
• [U-Boot] [PATCH 00/21] beagle_x15/omap5: Add dwc3 peripheral support   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 01/21] usb: dwc3: dwc3-omap: Use the clear register inorder to clear the interrupts   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 01/21] usb: dwc3: dwc3-omap: Use the clear register inorder to clear the interrupts   Marek Vasut
  • [U-Boot] [PATCH 02/21] usb: gadget: ether: Perform board initialization from ethernet gadget driver   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 02/21] usb: gadget: ether: Perform board initialization from ethernet gadget driver   Marek Vasut
  • [U-Boot] [PATCH 03/21] ARM: DRA7: Enable clocks for USB OTGSS2 and USB PHY2   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 04/21] TI PHY: Add support to control 2nd USB PHY in DRA7xx/AM57xx   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 04/21] TI PHY: Add support to control 2nd USB PHY in DRA7xx/AM57xx   Marek Vasut
  • [U-Boot] [PATCH 05/21] board: ti: beagle_x15: added USB initializtion code   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 06/21] board: ti: OMAP5: added USB initializtion code   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 07/21] include: configs: Enable DWC3 and DFU in ti_omap5_common   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 08/21] ARM: OMAP5: Add support for disabling clocks in uboot   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 09/21] ARM: OMAP5: Add functions to enable and disable USB clocks   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 10/21] ARM: AM43xx: Add support for disabling clocks in uboot   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 11/21] ARM: AM43xx: Add functions to enable and disable USB clocks   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 12/21] board: ti: invoke clock API to enable and disable clocks   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 13/21] ARM: OMAP5/AM43xx: remove enabling USB clocks from enable_basic_clocks()   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 14/21] board: ti: remove duplicate initialization of vbus_id_status   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 15/21] usb: host: xhci-omap: invoke board_usb_cleanup in xhci_hcd_stop   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 15/21] usb: host: xhci-omap: invoke board_usb_cleanup in xhci_hcd_stop   Marek Vasut
      • [U-Boot] [PATCH 15/21] usb: host: xhci-omap: invoke board_usb_cleanup in xhci_hcd_stop   Kishon Vijay Abraham I
      • [U-Boot] [PATCH 15/21] usb: host: xhci-omap: invoke board_usb_cleanup in xhci_hcd_stop   Marek Vasut
  • [U-Boot] [PATCH 16/21] include: configs: am43xx_evm: add 'usb stop' in usbboot env   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 17/21] am43xx: Add USB device boot support to SPL   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 18/21] usb: gadget: ether: populate _reset_ callback   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 19/21] spl: Fix USB boot device values for am43xx   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 20/21] spl: Add USB peripheral boot device value for am43xx   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 21/21] configs: am43xx: Add am43xx_evm_usbspl_defconfig   Kishon Vijay Abraham I
• [U-Boot] [PATCH 1/2] sunxi: Fix gmac not working on the Colombus board   Hans de Goede
  • [U-Boot] [PATCH 1/2] sunxi: Fix gmac not working on the Colombus board   Ian Campbell
• [U-Boot] [PATCH 2/2] sunxi: gpio: Add support for the gpio banks which are part of the R-io cluster   Hans de Goede
  • [U-Boot] [PATCH 2/2] sunxi: gpio: Add support for the gpio banks which are part of the R-io cluster   Ian Campbell
  • [U-Boot] [PATCH 2/2] sunxi: gpio: Add support for the gpio banks which are part of the R-io cluster   Simon Glass
    • [U-Boot] [PATCH 2/2] sunxi: gpio: Add support for the gpio banks which are part of the R-io cluster   Hans de Goede
      • [U-Boot] [PATCH 2/2] sunxi: gpio: Add support for the gpio banks which are part of the R-io cluster   Simon Glass
• [U-Boot] [PATCH v3] x86: baytrail: Configure FSP UPD from device tree   Andrew Bradford
  • [U-Boot] [PATCH v3] x86: baytrail: Configure FSP UPD from device tree   Bin Meng
    • [U-Boot] [PATCH v3] x86: baytrail: Configure FSP UPD from device tree   Andrew Bradford
      • [U-Boot] [PATCH v3] x86: baytrail: Configure FSP UPD from device tree   Bin Meng
      • [U-Boot] [PATCH v3] x86: baytrail: Configure FSP UPD from device tree   Andrew Bradford
      • [U-Boot] [PATCH v3] x86: baytrail: Configure FSP UPD from device tree   Simon Glass
      • [U-Boot] [PATCH v3] x86: baytrail: Configure FSP UPD from device tree   Andrew Bradford
      • [U-Boot] [PATCH v3] x86: baytrail: Configure FSP UPD from device tree   Bin Meng
• [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
  • [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
    • [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
      • [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
  • [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
    • [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] [PATCH 1/3][v3] imx: usb: ehci-mx6: reg accessor cleanups   Adrian Alonso
  • [U-Boot] [PATCH 2/3][v3] imx: usb: ehci-mx6: document board specific functions   Adrian Alonso
  • [U-Boot] [PATCH 3/3][v3] imx: usb: ehci-mx6: add usb support for imx7d soc   Adrian Alonso
  • [U-Boot] [PATCH 1/3][v3] imx: usb: ehci-mx6: reg accessor cleanups   Marek Vasut
• [U-Boot] [PATCH] imx: usb: ehci-mx6: wait_for_bit to check reg status   Adrian Alonso
  • [U-Boot] [PATCH] imx: usb: ehci-mx6: wait_for_bit to check reg status   Marek Vasut
• [U-Boot] [PATCH] fdt: add new fdt address parsing functions   Stephen Warren
  • [U-Boot] [PATCH] fdt: add new fdt address parsing functions   Stephen Warren
  • [U-Boot] [PATCH] fdt: add new fdt address parsing functions   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
  • [U-Boot] Please pull u-boot-dm   Tom Rini
  • [U-Boot] Please pull u-boot-dm   Simon Glass
    • [U-Boot] Please pull u-boot-dm   Tom Rini
  • [U-Boot] Please pull u-boot-dm   Simon Glass
    • [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH v1 0/2] Rename DDR4 target names   York Sun
  • [U-Boot] [PATCH v1 2/2] powerpc/defconfig: Rename defconfig file for DDR4 targets   York Sun
  • [U-Boot] [PATCH v1 0/2] Rename DDR4 target names   Priyanka Jain
    • [U-Boot] [PATCH v1 0/2] Rename DDR4 target names   York Sun
      • [U-Boot] [PATCH v1 0/2] Rename DDR4 target names   Priyanka Jain
• [U-Boot] [PATCH v1 1/2] armv8/ls2085a_emu: Drop DDR3 emulation target   York Sun
• [U-Boot] [PATCH v4 1/3] mmc: dw_mmc: Avoid using printf() for errors   Simon Glass
  • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Simon Glass
    • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Marek Vasut
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Simon Glass
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Marek Vasut
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Simon Glass
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Marek Vasut
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Jaehoon Chung
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Simon Glass
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Marek Vasut
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Simon Glass
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Marek Vasut
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Simon Glass
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Marek Vasut
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Simon Glass
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Marek Vasut
    • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Pantelis Antoniou
      • [U-Boot] [PATCH v4 2/3] mmc: dw_mmc: Support bypass mode with the get_mmc_clk() method   Marek Vasut
  • [U-Boot] [PATCH v4 1/3] mmc: dw_mmc: Avoid using printf() for errors   Jaehoon Chung
  • [U-Boot] [PATCH v4 1/3] mmc: dw_mmc: Avoid using printf() for errors   Pantelis Antoniou
• [U-Boot] [PATCH v4 3/3] mmc: Calculate dwmmc FIFO threshold size if not provided   Simon Glass
  • [U-Boot] [PATCH v4 3/3] mmc: Calculate dwmmc FIFO threshold size if not provided   Jaehoon Chung
  • [U-Boot] [PATCH v4 3/3] mmc: Calculate dwmmc FIFO threshold size if not provided   Pantelis Antoniou
• [U-Boot] [PATCH 05/15] dm: pci: Add a way to iterate through all PCI devices   Simon Glass
• [U-Boot] [PATCH 08/15] x86: Re-order efi-x86_defconfig   Simon Glass
• [U-Boot] [V4 1/2] sf: Add clear flag status register operation on Micron chips   Hou Zhiqiang
  • [U-Boot] [V4 1/2] sf: Add clear flag status register operation on Micron chips   Jagan Teki
    • [U-Boot] [V4 1/2] sf: Add clear flag status register operation on Micron chips   Hou Zhiqiang
  • [U-Boot] [V4 1/2] sf: Add clear flag status register operation on Micron chips   Jagan Teki
    • [U-Boot] [V4 1/2] sf: Add clear flag status register operation on Micron chips   Hou Zhiqiang
• [U-Boot] [PATCH] armv8: ls2085a: Add support of CONFIG_CMD_GREPENV   Prabhakar Kushwaha
• [U-Boot] [ANN] U-Boot v2015.07 released   Wolfgang Denk
  • [U-Boot] [ANN] U-Boot v2015.07 released   Jagan Teki
    • [U-Boot] [ANN] U-Boot v2015.07 released   Wolfgang Denk
• [U-Boot] [PATCH v1 1/2] cmd_sf: Add command "sf info" to show current device info   Jagan Teki
• [U-Boot] [PATCH V3 0/5] power: pfuze100: support driver model and regulator   Peng Fan
  • [U-Boot] [PATCH V3 1/6] power: pfuze100 correct SWBST macro definition   Peng Fan
    • [U-Boot] [PATCH V3 1/6] power: pfuze100 correct SWBST macro definition   Przemyslaw Marczak
  • [U-Boot] [PATCH V3 2/6] power: regulator use node name when no regulator-name   Peng Fan
    • [U-Boot] [PATCH V3 2/6] power: regulator use node name when no regulator-name   Simon Glass
    • [U-Boot] [PATCH V3 2/6] power: regulator use node name when no regulator-name   Przemyslaw Marczak
  • [U-Boot] [PATCH V3 3/6] power: regulator: update comments for regulator-name   Peng Fan
    • [U-Boot] [PATCH V3 3/6] power: regulator: update comments for regulator-name   Przemyslaw Marczak
  • [U-Boot] [PATCH V3 4/6] power: pmic: pfuze100 support driver model   Peng Fan
    • [U-Boot] [PATCH V3 4/6] power: pmic: pfuze100 support driver model   Przemyslaw Marczak
  • [U-Boot] [PATCH V3 5/6] power: regulator: add pfuze100 support   Peng Fan
    • [U-Boot] [PATCH V3 5/6] power: regulator: add pfuze100 support   Simon Glass
    • [U-Boot] [PATCH V3 5/6] power: regulator: add pfuze100 support   Przemyslaw Marczak
  • [U-Boot] [PATCH V3 6/6] fsl: common: pfuze: no use original pfuze code if DM_PMIC   Peng Fan
    • [U-Boot] [PATCH V3 6/6] fsl: common: pfuze: no use original pfuze code if DM_PMIC   Przemyslaw Marczak
• [U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file   Bin Meng
  • [U-Boot] [PATCH 2/4] x86: Update microcode dtsi and board dts files per microcode-tool   Bin Meng
    • [U-Boot] [PATCH 2/4] x86: Update microcode dtsi and board dts files per microcode-tool   Tom Rini
  • [U-Boot] [PATCH 3/4] x86: baytrail: Add microcode for BayTrail-I D0 stepping   Bin Meng
    • [U-Boot] [PATCH 3/4] x86: baytrail: Add microcode for BayTrail-I D0 stepping   Tom Rini
  • [U-Boot] [PATCH 4/4] x86: baytrail: Support multiple microcode copies   Bin Meng
    • [U-Boot] [PATCH 4/4] x86: baytrail: Support multiple microcode copies   Tom Rini
  • [U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file   Simon Glass
    • [U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file   Bin Meng
      • [U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file   Simon Glass
      • [U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file   Bin Meng
      • [U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file   Simon Glass
      • [U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file   Bin Meng
      • [U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file   Simon Glass
      • [U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file   Bin Meng
      • [U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file   Simon Glass
  • [U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file   Tom Rini
    • [U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file   Bin Meng
      • [U-Boot] [PATCH 1/4] x86: microcode-tool: Write pure data to the dtsi file   Simon Glass
• [U-Boot] [PATCH] arm/ls102xa:add hwconfig setting to support disable unused devices.   Zhuoyu Zhang
  • [U-Boot] [PATCH] arm/ls102xa:add hwconfig setting to support disable unused devices.   Huan Wang
    • [U-Boot] [PATCH] arm/ls102xa:add hwconfig setting to support disable unused devices.   Zhang Z.Y.
• [U-Boot] [PATCH 1/4] armv8: ls2085a: Update serdes1_cfg_tbl for 0x33 & 0x35 protocol   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/4] net: phy/vitesse: Add support for VSC8584 phy   Prabhakar Kushwaha
  • [U-Boot] [PATCH 3/4] net: phy/vitesse: Add support for VSC8584 phy   Joe Hershberger
• [U-Boot] [PATCH 4/4] armv8: ls2085qds: Add support of X-QSGMII-16PORT riser card   Prabhakar Kushwaha
• [U-Boot] [PATCH V2] imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file   Peng Fan
  • [U-Boot] [PATCH V2] imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file   Otavio Salvador
  • [U-Boot] [PATCH V2] imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file   Christian Gmeiner
  • [U-Boot] [PATCH V2] imx: mx6 move TARGET_xx Kconfig option to mx6 specific Kconfig file   Stefano Babic
• [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Andrew Bradford
  • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Bin Meng
    • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Simon Glass
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Andrew Bradford
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Bin Meng
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Andrew Bradford
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Bin Meng
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Simon Glass
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Bin Meng
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Simon Glass
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Bin Meng
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Simon Glass
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Andrew Bradford
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Andrew Bradford
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Simon Glass
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Andrew Bradford
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Simon Glass
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Andrew Bradford
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Simon Glass
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Bin Meng
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Bin Meng
      • [U-Boot] [PATCH v4] x86: baytrail: Configure FSP UPD from device tree   Bin Meng
• [U-Boot] [PATCH 2/4] armv8: fsl-lsch3: Initiaze 4 MACs per QSGMII in dpmac_info   Prabhakar Kushwaha
  • [U-Boot] [PATCH 2/4] armv8: fsl-lsch3: Initiaze 4 MACs per QSGMII in dpmac_info   Prabhakar Kushwaha
• [U-Boot] [PATCH v3 00/11] arm: rpi: Enable USB and Ethernet driver model Raspberry Pi   Simon Glass
  • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Simon Glass
    • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Stephen Warren
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Simon Glass
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Stephen Warren
    • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Linus Walleij
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Simon Glass
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Stephen Warren
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Tom Rini
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Ian Lepore
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Linus Walleij
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Rob Herring
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Ian Lepore
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Stephen Warren
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Linus Walleij
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Pantelis Antoniou
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Stephen Warren
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Geert Uytterhoeven
      • [U-Boot] [PATCH v3 01/11] dm: serial: Update binding for PL01x serial UART   Rob Herring
  • [U-Boot] [PATCH v3 02/11] arm: rpi: Define CONFIG_TFTP_TSIZE to show tftp size info   Simon Glass
    • [U-Boot] [PATCH v3 02/11] arm: rpi: Define CONFIG_TFTP_TSIZE to show tftp size info   Stephen Warren
  • [U-Boot] [PATCH v3 03/11] arm: rpi: Bring in kernel device tree files   Simon Glass
  • [U-Boot] [PATCH v3 04/11] arm: rpi: Device tree modifications for U-Boot   Simon Glass
    • [U-Boot] [PATCH v3 04/11] arm: rpi: Device tree modifications for U-Boot   Stephen Warren
      • [U-Boot] [PATCH v3 04/11] arm: rpi: Device tree modifications for U-Boot   Simon Glass
      • [U-Boot] [PATCH v3 04/11] arm: rpi: Device tree modifications for U-Boot   Stephen Warren
      • [U-Boot] [PATCH v3 04/11] arm: rpi: Device tree modifications for U-Boot   Simon Glass
  • [U-Boot] [PATCH v3 05/11] arm: rpi: Add device tree files for Raspberry Pi 2   Simon Glass
  • [U-Boot] [PATCH v3 06/11] arm: rpi: Enable device tree control for Rasberry Pi   Simon Glass
    • [U-Boot] [PATCH v3 06/11] arm: rpi: Enable device tree control for Rasberry Pi   Stephen Warren
      • [U-Boot] [PATCH v3 06/11] arm: rpi: Enable device tree control for Rasberry Pi   Simon Glass
      • [U-Boot] [PATCH v3 06/11] arm: rpi: Enable device tree control for Rasberry Pi   Stephen Warren
      • [U-Boot] [PATCH v3 06/11] arm: rpi: Enable device tree control for Rasberry Pi   Simon Glass
  • [U-Boot] [PATCH v3 07/11] arm: rpi: Enable device tree control for Rasberry Pi 2   Simon Glass
  • [U-Boot] [PATCH v3 08/11] arm: rpi: Drop the UART console platform data   Simon Glass
  • [U-Boot] [PATCH v3 09/11] arm: rpi: Drop the GPIO platform data   Simon Glass
  • [U-Boot] [PATCH v3 10/11] arm: rpi: Move to driver model for USB   Simon Glass
  • [U-Boot] [PATCH v3 11/11] arm: rpi: Use driver model for Ethernet   Simon Glass
• [U-Boot] [PATCH] powerpc/t1024qds: Add missing T1024QDS_DDR4_defconfig   York Sun
• [U-Boot] [PATCH v3 01/16] drivers/net/vsc9953: Remove 'CONFIG_' from macros' name   Joe Hershberger
  • [U-Boot] [PATCH v3 01/16] drivers/net/vsc9953: Remove 'CONFIG_' from macros' name   York Sun
    • [U-Boot] [PATCH v3 01/16] drivers/net/vsc9953: Remove 'CONFIG_' from macros' name   Joe Hershberger
      • [U-Boot] [PATCH v3 01/16] drivers/net/vsc9953: Remove 'CONFIG_' from macros' name   York Sun
• [U-Boot] [PATCH v3 02/16] drivers/net/vsc9953: Cleanup patch   Joe Hershberger
• [U-Boot] [PATCH v3 03/16] drivers/net/vsc9953: Fix bug when enabling a port   Joe Hershberger
• [U-Boot] [PATCH v3 04/16] drivers/net/vsc9953: Fix missing reserved register   Joe Hershberger
• [U-Boot] [PATCH v3 05/16] include/bitfield: Add new bitfield operations   Joe Hershberger
• [U-Boot] [PATCH v3 06/16] drivers/net/vsc9953: Add default configuration for VSC9953 L2 Switch   Joe Hershberger
• [U-Boot] [PATCH v3 07/16] common/cmd_ethsw: Add generic commands for Ethernet Switches   Joe Hershberger
  • [U-Boot] [PATCH v3 07/16] common/cmd_ethsw: Add generic commands for Ethernet Switches   York Sun
    • [U-Boot] [PATCH v3 07/16] common/cmd_ethsw: Add generic commands for Ethernet Switches   Joe Hershberger
• [U-Boot] [PATCH v3 08/16] drivers/net/vsc9953: Use the generic Ethernet Switch parser   Joe Hershberger
• [U-Boot] [PATCH v3 09/16] drivers/net/vsc9953: Add command to show/clear port counters   Joe Hershberger
• [U-Boot] [PATCH v3 10/16] drivers/net/vsc9953: Add commands to enable/disable HW learning   Joe Hershberger
• [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   Joe Hershberger
  • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   York Sun
    • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   Codrin Constantin Ciubotariu
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   York Sun
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   Joe Hershberger
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   York Sun
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   Joe Hershberger
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   York Sun
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   York Sun
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   Codrin Constantin Ciubotariu
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   Codrin Constantin Ciubotariu
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   York Sun
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   Codrin Constantin Ciubotariu
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   York Sun
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   Joe Hershberger
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   York Sun
      • [U-Boot] [PATCH v3 11/16] net/eth.c: Add function to validate a MAC address   Codrin Constantin Ciubotariu
• [U-Boot] [PATCH v3 12/16] drivers/net/vsc9953: Add commands to manipulate the FDB for VSC9953   Joe Hershberger
• [U-Boot] [PATCH v3 13/16] drivers/net/vsc9953: Add VLAN commands for VSC9953   Joe Hershberger
• [U-Boot] [PATCH v3 14/16] drivers/net/vsc9953: Add command for shared/private VLAN learning   Joe Hershberger
• [U-Boot] [PATCH v3 15/16] drivers/net/vsc9953: Add commands for VLAN ingress filtering   Joe Hershberger
• [U-Boot] [PATCH v3 16/16] drivers/net/vsc9953: Add GPL-2.0+ SPDX-License-Identifier   Joe Hershberger
• [U-Boot] [PATCH 10/18] dm: eth: Avoid blocking on packet reception   Joe Hershberger
• [U-Boot] u-boot FIT image support   York Sun
  • [U-Boot] u-boot FIT image support   Simon Glass
    • [U-Boot] u-boot FIT image support   York Sun
      • [U-Boot] u-boot FIT image support   Simon Glass
      • [U-Boot] u-boot FIT image support   York Sun
• [U-Boot] [PATCH 1/3] ARM: tegra: move kernel_addr_r on T210   Stephen Warren
  • [U-Boot] [PATCH 2/3] ARM: tegra: query_sdram_size() cleanup   Stephen Warren
    • [U-Boot] [PATCH 2/3] ARM: tegra: query_sdram_size() cleanup   Simon Glass
      • [U-Boot] [PATCH 2/3] ARM: tegra: query_sdram_size() cleanup   Stephen Warren
      • [U-Boot] [PATCH 2/3] ARM: tegra: query_sdram_size() cleanup   Simon Glass
  • [U-Boot] [PATCH 3/3] ARM: tegra: represent RAM in 1 or 2 banks   Stephen Warren
    • [U-Boot] [PATCH 3/3] ARM: tegra: represent RAM in 1 or 2 banks   Simon Glass
  • [U-Boot] [PATCH 1/3] ARM: tegra: move kernel_addr_r on T210   Simon Glass
• [U-Boot] [PATCH 0/9] Replace the FAT filesystem code   Stephen Warren
  • [U-Boot] [PATCH 3/9] fat: add ff.c implementation   Stephen Warren
  • [U-Boot] [PATCH 4/9] fat: apply upstream bugfix to ff.c   Stephen Warren
  • [U-Boot] [PATCH 5/9] fat: ffconf.h changes for U-Boot port   Stephen Warren
  • [U-Boot] [PATCH 6/9] fat: port integer.h to U-Boot types   Stephen Warren
  • [U-Boot] [PATCH 7/9] fat: add U-Boot to ff.c API conversion wrapper   Stephen Warren
  • [U-Boot] [PATCH 8/9] fat: switch to new FAT implementation   Stephen Warren
  • [U-Boot] [PATCH 9/9] fat: remove old implementation   Stephen Warren
  • [U-Boot] [PATCH 0/9] Replace the FAT filesystem code   Stephen Warren
• [U-Boot] [PATCH 1/9] disk: support host devices in dev_print()   Stephen Warren
• [U-Boot] [PATCH 2/9] fat: move to a different directory   Stephen Warren
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
    • [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
    • [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PATCH] x86: fsp: Do not assert VPD_IMAGE_REV when DEBUG   Bin Meng
  • [U-Boot] [PATCH] x86: fsp: Do not assert VPD_IMAGE_REV when DEBUG   Simon Glass
    • [U-Boot] [PATCH] x86: fsp: Do not assert VPD_IMAGE_REV when DEBUG   Simon Glass
• [U-Boot] [PATCH 0/5] sunxi: display: add support for eDP panels connected via an anx9804 bridge chip   Hans de Goede
  • [U-Boot] [PATCH 1/5] sunxi: clock: Add clock_get_pll3() helper function   Hans de Goede
    • [U-Boot] [PATCH 1/5] sunxi: clock: Add clock_get_pll3() helper function   Ian Campbell
  • [U-Boot] [PATCH 2/5] sun6i: clock: Add support for the mipi pll   Hans de Goede
    • [U-Boot] [PATCH 2/5] sun6i: clock: Add support for the mipi pll   Ian Campbell
    • [U-Boot] [PATCH 2/5] sun6i: clock: Add support for the mipi pll   Chen-Yu Tsai
      • [U-Boot] [PATCH 2/5] sun6i: clock: Add support for the mipi pll   Hans de Goede
  • [U-Boot] [PATCH 3/5] sun6i: display: Add support for using the mipi pll as lcd clock source   Hans de Goede
    • [U-Boot] [PATCH 3/5] sun6i: display: Add support for using the mipi pll as lcd clock source   Ian Campbell
    • [U-Boot] [PATCH 3/5] sun6i: display: Add support for using the mipi pll as lcd clock source   Anatolij Gustschin
  • [U-Boot] [PATCH 4/5] video: Add support for the ANX9804 parallel lcd to dp bridge chip   Hans de Goede
    • [U-Boot] [PATCH 4/5] video: Add support for the ANX9804 parallel lcd to dp bridge chip   Ian Campbell
      • [U-Boot] [PATCH 4/5] video: Add support for the ANX9804 parallel lcd to dp bridge chip   Hans de Goede
    • [U-Boot] [PATCH 4/5] video: Add support for the ANX9804 parallel lcd to dp bridge chip   Anatolij Gustschin
  • [U-Boot] [PATCH 5/5] sunxi: Display: Add support for eDP panels connected via an anx9804 bridge   Hans de Goede
    • [U-Boot] [PATCH 5/5] sunxi: Display: Add support for eDP panels connected via an anx9804 bridge   Ian Campbell
  • [U-Boot] [PATCH 0/5] sunxi: display: add support for eDP panels connected via an anx9804 bridge chip   Anatolij Gustschin
• [U-Boot] [PATCH v2 0/9] x86: minnowmax: Add interrupt support   Simon Glass
  • [U-Boot] [PATCH v2 1/9] dm: pci: Provide friendly config access functions   Simon Glass
    • [U-Boot] [PATCH v2 1/9] dm: pci: Provide friendly config access functions   Bin Meng
      • [U-Boot] [PATCH v2 1/9] dm: pci: Provide friendly config access functions   Simon Glass
  • [U-Boot] [PATCH v2 2/9] dm: pci: Add a way to iterate through all PCI devices   Simon Glass
    • [U-Boot] [PATCH v2 2/9] dm: pci: Add a way to iterate through all PCI devices   Bin Meng
      • [U-Boot] [PATCH v2 2/9] dm: pci: Add a way to iterate through all PCI devices   Simon Glass
  • [U-Boot] [PATCH v2 3/9] x86: Re-order efi-x86_defconfig   Simon Glass
    • [U-Boot] [PATCH v2 3/9] x86: Re-order efi-x86_defconfig   Bin Meng
      • [U-Boot] [PATCH v2 3/9] x86: Re-order efi-x86_defconfig   Simon Glass
      • [U-Boot] [PATCH v2 3/9] x86: Re-order efi-x86_defconfig   Bin Meng
      • [U-Boot] [PATCH v2 3/9] x86: Re-order efi-x86_defconfig   Simon Glass
      • [U-Boot] [PATCH v2 3/9] x86: Re-order efi-x86_defconfig   Bin Meng
      • [U-Boot] [PATCH v2 3/9] x86: Re-order efi-x86_defconfig   Simon Glass
  • [U-Boot] [PATCH v2 4/9] x86: Tidy up the PIRQ routing code a little   Simon Glass
    • [U-Boot] [PATCH v2 4/9] x86: Tidy up the PIRQ routing code a little   Bin Meng
  • [U-Boot] [PATCH v2 5/9] x86: Split out fsp_init_phase_pci() code into a new function   Simon Glass
    • [U-Boot] [PATCH v2 5/9] x86: Split out fsp_init_phase_pci() code into a new function   Bin Meng
  • [U-Boot] [PATCH v2 6/9] x86: Allow pirq_init() to return an error   Simon Glass
    • [U-Boot] [PATCH v2 6/9] x86: Allow pirq_init() to return an error   Bin Meng
  • [U-Boot] [PATCH v2 7/9] x86: minnowmax: Define and enable interrupt setup   Simon Glass
    • [U-Boot] [PATCH v2 7/9] x86: minnowmax: Define and enable interrupt setup   Bin Meng
      • [U-Boot] [PATCH v2 7/9] x86: minnowmax: Define and enable interrupt setup   Simon Glass
      • [U-Boot] [PATCH v2 7/9] x86: minnowmax: Define and enable interrupt setup   Bin Meng
  • [U-Boot] [PATCH v2 8/9] x86: baytrail: Tidy up interrupt and FSP init   Simon Glass
    • [U-Boot] [PATCH v2 8/9] x86: baytrail: Tidy up interrupt and FSP init   Bin Meng
  • [U-Boot] [PATCH v2 9/9] x86: baytrail: Support running as an EFI payload   Simon Glass
    • [U-Boot] [PATCH v2 9/9] x86: baytrail: Support running as an EFI payload   Bin Meng
• [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
  • [U-Boot] Please pull u-boot-sunxi master   Tom Rini
  • [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
    • [U-Boot] Please pull u-boot-sunxi master   Tom Rini
  • [U-Boot] Please pull u-boot-sunxi master   Hans de Goede
    • [U-Boot] Please pull u-boot-sunxi master   Tom Rini
• [U-Boot] [PATCH v2] dm: serial: Add a REQUIRE_SERIAL_CONSOLE option for boards with no serial port   Hans de Goede
  • [U-Boot] [PATCH v2] dm: serial: Add a REQUIRE_SERIAL_CONSOLE option for boards with no serial port   Simon Glass
    • [U-Boot] [PATCH v2] dm: serial: Add a REQUIRE_SERIAL_CONSOLE option for boards with no serial port   Simon Glass
• [U-Boot] [PATCH] semihosting: Improve ARMv7A support   Andrey Smirnov
• [U-Boot] [PATCH] arm: iproc: add NAND driver   Steve Rae
  • [U-Boot] [PATCH] arm: iproc: add NAND driver   Scott Wood
• [U-Boot] [PATCH] driver: misc: debug server: Update Error message   Prabhakar Kushwaha
  • [U-Boot] [u-boot-release] [PATCH] driver: misc: debug server: Update Error message   Sharma Bhupesh
• [U-Boot] [PATCH 0/3] Introduce TPM driver model and STMicroelectronics ST33ZP24 TPMs   Simon Glass
  • [U-Boot] [PATCH 0/3] Introduce TPM driver model and STMicroelectronics ST33ZP24 TPMs   Christophe Ricard
    • [U-Boot] [PATCH 1/3] tpm: Move tpm_tis_i2c to tpm_i2c_infineon   Christophe Ricard
      • [U-Boot] [PATCH 1/3] tpm: Move tpm_tis_i2c to tpm_i2c_infineon   Simon Glass
      • [U-Boot] [PATCH 1/3] tpm: Move tpm_tis_i2c to tpm_i2c_infineon   Simon Glass
    • [U-Boot] [PATCH 2/3] tpm: Initial work to introduce TPM driver model   Christophe Ricard
      • [U-Boot] [PATCH 2/3] tpm: Initial work to introduce TPM driver model   Simon Glass
      • [U-Boot] [PATCH 2/3] tpm: Initial work to introduce TPM driver model   Christophe Ricard
      • [U-Boot] [PATCH 2/3] tpm: Initial work to introduce TPM driver model   Simon Glass
    • [U-Boot] [PATCH 3/3] tpm: Add st33zp24 tpm with i2c and spi phy   Christophe Ricard
      • [U-Boot] [PATCH 3/3] tpm: Add st33zp24 tpm with i2c and spi phy   Simon Glass
      • [U-Boot] [PATCH 3/3] tpm: Add st33zp24 tpm with i2c and spi phy   Christophe Ricard
      • [U-Boot] [PATCH 3/3] tpm: Add st33zp24 tpm with i2c and spi phy   Simon Glass
  • [U-Boot] [PATCH 0/3] Introduce TPM driver model and STMicroelectronics ST33ZP24 TPMs   Christophe Ricard
    • [U-Boot] [PATCH 0/3] Introduce TPM driver model and STMicroelectronics ST33ZP24 TPMs   Simon Glass
• [U-Boot] [PATCH 1/6] dm: core: Add a way to set a device name   Simon Glass
• [U-Boot] [PATCH 2/6] dm: core: Fix a typo in the uclass_get_device_by_name() comment   Simon Glass
• [U-Boot] [PATCH] dm: pmic: max77686: Correct two typos in a comment   Simon Glass
  • [U-Boot] [PATCH] dm: pmic: max77686: Correct two typos in a comment   Przemyslaw Marczak
• [U-Boot] [PATCH] cm5200: fix FAT function prototypes   Stephen Warren
  • [U-Boot] cm5200: fix FAT function prototypes   Tom Rini
• [U-Boot] regarding u-boot ethernet support for TFTP boot in Banana pi R1 (Lamobo R1)   Ramakrishnan Meenakshi Sundaram
  • [U-Boot] regarding u-boot ethernet support for TFTP boot in Banana pi R1 (Lamobo R1)   ramki982
    • [U-Boot] regarding u-boot ethernet support for TFTP boot in Banana pi R1 (Lamobo R1)   Hans de Goede
      • [U-Boot] regarding u-boot ethernet support for TFTP boot in Banana pi R1 (Lamobo R1)   Ramakrishnan Meenakshi Sundaram
• [U-Boot] [V4 2/2] sf: Turn SPI flash into 3-Byte address mode on Micron chips   Hou Zhiqiang
  • [U-Boot] [V4 2/2] sf: Turn SPI flash into 3-Byte address mode on Micron chips   Jagan Teki
    • [U-Boot] [V4 2/2] sf: Turn SPI flash into 3-Byte address mode on Micron chips   Hou Zhiqiang
• [U-Boot] [PATCH 0/3] add dfu support for at91 sam9260 based boards   Heiko Schocher
• [U-Boot] [PATCH 2/3] usb: gadget: at91_udc: add support for at91_udc   Heiko Schocher
• [U-Boot] [PATCH v2 0/4] add dfu support for at91 sam9260 based boards   Heiko Schocher
  • [U-Boot] [PATCH v2 1/4] ARM: at91: add cpu.h   Heiko Schocher
    • [U-Boot] [PATCH v2 1/4] ARM: at91: add cpu.h   Alexandre Belloni
      • [U-Boot] [PATCH v2 1/4] ARM: at91: add cpu.h   Heiko Schocher
• [U-Boot] [PATCH v2 2/4] usb: gadget: at91_udc: port linux driver at91_udc   Heiko Schocher
• [U-Boot] [PATCH v2 3/4] usb: gadget: at91_udc: add at91_udc into U-Boot   Heiko Schocher
• [U-Boot] [PATCH v2 4/4] at91, taurus, smartweb: add dfu support   Heiko Schocher
• [U-Boot] [PATCH] video: vesa: Correct a typo in the Kconfig VESA mode string   Bin Meng
  • [U-Boot] [PATCH] video: vesa: Correct a typo in the Kconfig VESA mode string   Simon Glass
    • [U-Boot] [PATCH] video: vesa: Correct a typo in the Kconfig VESA mode string   Simon Glass
• [U-Boot] [PATCH] x86: Set APs' req_seq to the reg number from device tree   Bin Meng
  • [U-Boot] [PATCH] x86: Set APs' req_seq to the reg number from device tree   Simon Glass
    • [U-Boot] [PATCH] x86: Set APs' req_seq to the reg number from device tree   Simon Glass
• [U-Boot] [PATCH] ARM: Allwinner: H3 SoC: Boot Allwinner H3 device in HYP mode.   bharat gohil
• [U-Boot] [PATCH 0/3] usb: host/gadget: Miscellaneous fixes   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 1/3] usb: gadget: ether: Perform board initialization from ethernet gadget driver   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 1/3] usb: gadget: ether: Perform board initialization from ethernet gadget driver   Tom Rini
  • [U-Boot] [PATCH 2/3] usb: host: xhci-omap: invoke board_usb_cleanup in xhci_hcd_stop   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 2/3] usb: host: xhci-omap: invoke board_usb_cleanup in xhci_hcd_stop   Tom Rini
  • [U-Boot] [PATCH 3/3] usb: gadget: ether: populate _reset_ callback   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 3/3] usb: gadget: ether: populate _reset_ callback   Marek Vasut
      • [U-Boot] [PATCH 3/3] usb: gadget: ether: populate _reset_ callback   Lukasz Majewski
    • [U-Boot] [PATCH 3/3] usb: gadget: ether: populate _reset_ callback   Tom Rini
  • [U-Boot] [PATCH 0/3] usb: host/gadget: Miscellaneous fixes   Lukasz Majewski
• [U-Boot] [PATCH 0/5] ti: usb (dwc3) peripheral mode fixes   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 1/5] usb: dwc3: dwc3-omap: Use the clear register inorder to clear the interrupts   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 1/5] usb: dwc3: dwc3-omap: Use the clear register inorder to clear the interrupts   Tom Rini
    • [U-Boot] [U-Boot, 1/5] usb: dwc3: dwc3-omap: Use the clear register inorder to clear the interrupts   Tom Rini
  • [U-Boot] [PATCH 2/5] ARM: DRA7: Enable clocks for USB OTGSS2 and USB PHY2   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 2/5] ARM: DRA7: Enable clocks for USB OTGSS2 and USB PHY2   Tom Rini
    • [U-Boot] [U-Boot, 2/5] ARM: DRA7: Enable clocks for USB OTGSS2 and USB PHY2   Tom Rini
  • [U-Boot] [PATCH 3/5] TI PHY: Add support to control 2nd USB PHY in DRA7xx/AM57xx   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 3/5] TI PHY: Add support to control 2nd USB PHY in DRA7xx/AM57xx   Tom Rini
    • [U-Boot] [U-Boot, 3/5] TI PHY: Add support to control 2nd USB PHY in DRA7xx/AM57xx   Tom Rini
  • [U-Boot] [PATCH 4/5] board: ti: remove duplicate initialization of vbus_id_status   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 4/5] board: ti: remove duplicate initialization of vbus_id_status   Tom Rini
    • [U-Boot] [U-Boot, 4/5] board: ti: remove duplicate initialization of vbus_id_status   Tom Rini
  • [U-Boot] [PATCH 5/5] include: configs: am43xx_evm: add 'usb stop' in usbboot env   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 5/5] include: configs: am43xx_evm: add 'usb stop' in usbboot env   Tom Rini
    • [U-Boot] [U-Boot, 5/5] include: configs: am43xx_evm: add 'usb stop' in usbboot env   Tom Rini
• [U-Boot] [PATCH 0/6] ti: dwc3: Enable USB clocks on-demand   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 1/6] ARM: OMAP5: Add support for disabling clocks in uboot   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 1/6] ARM: OMAP5: Add support for disabling clocks in uboot   Tom Rini
    • [U-Boot] [U-Boot, 1/6] ARM: OMAP5: Add support for disabling clocks in uboot   Tom Rini
  • [U-Boot] [PATCH 2/6] ARM: OMAP5: Add functions to enable and disable USB clocks   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 2/6] ARM: OMAP5: Add functions to enable and disable USB clocks   Tom Rini
      • [U-Boot] [PATCH 2/6] ARM: OMAP5: Add functions to enable and disable USB clocks   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 3/6] ARM: AM43xx: Add support for disabling clocks in uboot   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 3/6] ARM: AM43xx: Add support for disabling clocks in uboot   Tom Rini
    • [U-Boot] [PATCH 3/6] ARM: AM43xx: Add support for disabling clocks in uboot   Lukasz Majewski
      • [U-Boot] [PATCH 3/6] ARM: AM43xx: Add support for disabling clocks in uboot   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 4/6] ARM: AM43xx: Add functions to enable and disable USB clocks   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 4/6] ARM: AM43xx: Add functions to enable and disable USB clocks   Tom Rini
      • [U-Boot] [PATCH 4/6] ARM: AM43xx: Add functions to enable and disable USB clocks   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 5/6] board: ti: invoke clock API to enable and disable clocks   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 5/6] board: ti: invoke clock API to enable and disable clocks   Tom Rini
  • [U-Boot] [PATCH 6/6] ARM: OMAP5/AM43xx: remove enabling USB clocks from enable_basic_clocks()   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 6/6] ARM: OMAP5/AM43xx: remove enabling USB clocks from enable_basic_clocks()   Tom Rini
• [U-Boot] [PATCH v6 1/5] dma: lpc32xx: add DMA driver   slemieux.tyco at gmail.com
  • [U-Boot] [PATCH v6 1/5] dma: lpc32xx: add DMA driver   Marek Vasut
  • [U-Boot] [PATCH v6 1/5] dma: lpc32xx: add DMA driver   Vladimir Zapolskiy
  • [U-Boot] [U-Boot,v6,1/5] dma: lpc32xx: add DMA driver   Tom Rini
• [U-Boot] [PATCH v6 2/5] nand: lpc32xx: add hardware ECC support   slemieux.tyco at gmail.com
  • [U-Boot] [PATCH v6 2/5] nand: lpc32xx: add hardware ECC support   Vladimir Zapolskiy
    • [U-Boot] [PATCH v6 2/5] nand: lpc32xx: add hardware ECC support   LEMIEUX, SYLVAIN
      • [U-Boot] [PATCH v6 2/5] nand: lpc32xx: add hardware ECC support   Vladimir Zapolskiy
• [U-Boot] [PATCH v6 3/5] nand: lpc32xx: add ECC layout for small page NAND   slemieux.tyco at gmail.com
• [U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver   slemieux.tyco at gmail.com
  • [U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver   Marek Vasut
    • [U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver   LEMIEUX, SYLVAIN
  • [U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver   Vladimir Zapolskiy
    • [U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver   Marek Vasut
      • [U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver   LEMIEUX, SYLVAIN
      • [U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver   Vladimir Zapolskiy
      • [U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver   Marek Vasut
    • [U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver   LEMIEUX, SYLVAIN
      • [U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver   Vladimir Zapolskiy
      • [U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver   LEMIEUX, SYLVAIN
      • [U-Boot] [PATCH v6 5/5] usb: lpc32xx: add host USB driver   Vladimir Zapolskiy
• [U-Boot] question: where is the "start" label of u-boot 2015 07   魏晓萌
  • [U-Boot] question: where is the "start" label of u-boot 2015 07   Simon Glass
• [U-Boot] [PATCH] driver: net: ldpaa_eth: Get MAC address from env variable   Prabhakar Kushwaha
  • [U-Boot] [PATCH] driver: net: ldpaa_eth: Get MAC address from env variable   Joe Hershberger
• [U-Boot] [PATCH 1/4] imx: add cpu type for i.MX2 and i.MX3   Peng Fan
  • [U-Boot] [PATCH 2/4] imx: mx31 use new formula for get_cpu_rev   Peng Fan
    • [U-Boot] [PATCH 2/4] imx: mx31 use new formula for get_cpu_rev   Stefano Babic
  • [U-Boot] [PATCH 3/4] imx: mxs: reimplement get_cpu_rev   Peng Fan
    • [U-Boot] [PATCH 3/4] imx: mxs: reimplement get_cpu_rev   Stefano Babic
  • [U-Boot] [PATCH 4/4] imx-common: consolidate macros and prototypes into sys_proto.h   Peng Fan
    • [U-Boot] [PATCH 4/4] imx-common: consolidate macros and prototypes into sys_proto.h   Stefano Babic
    • [U-Boot] [PATCH 4/4] imx-common: consolidate macros and prototypes into sys_proto.h   Stefano Babic
      • [U-Boot] [PATCH 4/4] imx-common: consolidate macros and prototypes into sys_proto.h   Peng Fan
  • [U-Boot] [PATCH 1/4] imx: add cpu type for i.MX2 and i.MX3   Stefano Babic
• [U-Boot] [PATCH v3 00/10] x86: minnowmax: Add interrupt support   Simon Glass
  • [U-Boot] [PATCH v3 01/10] dm: pci: Provide friendly config access functions   Simon Glass
    • [U-Boot] [PATCH v3 01/10] dm: pci: Provide friendly config access functions   Bin Meng
      • [U-Boot] [PATCH v3 01/10] dm: pci: Provide friendly config access functions   Simon Glass
  • [U-Boot] [PATCH v3 02/10] dm: pci: Add a way to iterate through all PCI devices   Simon Glass
    • [U-Boot] [PATCH v3 02/10] dm: pci: Add a way to iterate through all PCI devices   Bin Meng
      • [U-Boot] [PATCH v3 02/10] dm: pci: Add a way to iterate through all PCI devices   Simon Glass
  • [U-Boot] [PATCH v3 03/10] x86: Re-order efi-x86_defconfig   Simon Glass
    • [U-Boot] [PATCH v3 03/10] x86: Re-order efi-x86_defconfig   Bin Meng
      • [U-Boot] [PATCH v3 03/10] x86: Re-order efi-x86_defconfig   Simon Glass
  • [U-Boot] [PATCH v3 04/10] x86: Tidy up the PIRQ routing code a little   Simon Glass
    • [U-Boot] [PATCH v3 04/10] x86: Tidy up the PIRQ routing code a little   Simon Glass
  • [U-Boot] [PATCH v3 05/10] x86: Split out fsp_init_phase_pci() code into a new function   Simon Glass
    • [U-Boot] [PATCH v3 05/10] x86: Split out fsp_init_phase_pci() code into a new function   Simon Glass
  • [U-Boot] [PATCH v3 06/10] x86: Allow pirq_init() to return an error   Simon Glass
    • [U-Boot] [PATCH v3 06/10] x86: Allow pirq_init() to return an error   Simon Glass
  • [U-Boot] [PATCH v3 07/10] x86: minnowmax: Define and enable interrupt setup   Simon Glass
    • [U-Boot] [PATCH v3 07/10] x86: minnowmax: Define and enable interrupt setup   Bin Meng
  • [U-Boot] [PATCH v3 08/10] x86: baytrail: Tidy up interrupt and FSP init   Simon Glass
    • [U-Boot] [PATCH v3 08/10] x86: baytrail: Tidy up interrupt and FSP init   Bin Meng
      • [U-Boot] [PATCH v3 08/10] x86: baytrail: Tidy up interrupt and FSP init   Simon Glass
  • [U-Boot] [PATCH v3 09/10] x86: Add a simple interrupt script to the README   Simon Glass
    • [U-Boot] [PATCH v3 09/10] x86: Add a simple interrupt script to the README   Bin Meng
  • [U-Boot] [PATCH v3 10/10] x86: baytrail: Support running as an EFI payload   Simon Glass
    • [U-Boot] [PATCH v3 10/10] x86: baytrail: Support running as an EFI payload   Simon Glass
• [U-Boot] [PATCH] tegra: Correct logic for reading pll_misc in clock_start_pll()   Simon Glass
  • [U-Boot] [PATCH] tegra: Correct logic for reading pll_misc in clock_start_pll()   Tom Warren
  • [U-Boot] [PATCH] tegra: Correct logic for reading pll_misc in clock_start_pll()   Tom Warren
    • [U-Boot] [PATCH] tegra: Correct logic for reading pll_misc in clock_start_pll()   Simon Glass
• [U-Boot] [PATCH][v2] driver: misc: debug server: Update Error message   Prabhakar Kushwaha
• [U-Boot] [PATCH][v3] driver: misc: debug server: Update Error message   Prabhakar Kushwaha
• [U-Boot] [PATCH v2 0/4] lpc32xx: devkit3250 board update   Vladimir Zapolskiy
• [U-Boot] [PATCH V2 1/3] gpio: Add DW APB GPIO driver   Marek Vasut
  • [U-Boot] [PATCH 3/3] arm: socfpga: Enable DWAPB GPIO driver   Marek Vasut
    • [U-Boot] [PATCH 3/3] arm: socfpga: Enable DWAPB GPIO driver   Simon Glass
  • [U-Boot] [PATCH V2 1/3] gpio: Add DW APB GPIO driver   Simon Glass
    • [U-Boot] [PATCH V2 1/3] gpio: Add DW APB GPIO driver   Fabio Estevam
      • [U-Boot] [PATCH V2 1/3] gpio: Add DW APB GPIO driver   Simon Glass
    • [U-Boot] [PATCH V2 1/3] gpio: Add DW APB GPIO driver   Marek Vasut
    • [U-Boot] [PATCH V3 1/3] gpio: Add DW APB GPIO driver   Marek Vasut
• [U-Boot] [PATCH 2/3] arm: socfpga: dts: Add bank-name property to each GPIO bank   Marek Vasut
  • [U-Boot] [PATCH 2/3] arm: socfpga: dts: Add bank-name property to each GPIO bank   Simon Glass
• [U-Boot] [RFC v2 PATCH 0/3] add pinctrl driver framework   Masahiro Yamada
• [U-Boot] [RFC v2 PATCH 1/3] pinctrl: add pin control uclass support   Masahiro Yamada
• [U-Boot] [RFC v2 PATCH 2/3] pinctrl: add simple pinctrl implementation   Masahiro Yamada
• [U-Boot] [RFC v2 PATCH 3/3] pinctrl: sandbox: add sandbox pinctrl driver   Masahiro Yamada
• [U-Boot] [RFC v3 PATCH 0/4] add pinctrl driver framework   Masahiro Yamada
  • [U-Boot] [RFC v3 PATCH 2/4] pinctrl: add pin control uclass support   Masahiro Yamada
    • [U-Boot] [RFC v3 PATCH 2/4] pinctrl: add pin control uclass support   Simon Glass
      • [U-Boot] [RFC v3 PATCH 2/4] pinctrl: add pin control uclass support   Simon Glass
      • [U-Boot] [RFC v3 PATCH 2/4] pinctrl: add pin control uclass support   Masahiro Yamada
      • [U-Boot] [RFC v3 PATCH 2/4] pinctrl: add pin control uclass support   Simon Glass
      • [U-Boot] [RFC v3 PATCH 2/4] pinctrl: add pin control uclass support   Masahiro Yamada
      • [U-Boot] [RFC v3 PATCH 2/4] pinctrl: add pin control uclass support   Simon Glass
      • [U-Boot] [RFC v3 PATCH 2/4] pinctrl: add pin control uclass support   Masahiro Yamada
      • [U-Boot] [RFC v3 PATCH 2/4] pinctrl: add pin control uclass support   Simon Glass
      • [U-Boot] [RFC v3 PATCH 2/4] pinctrl: add pin control uclass support   Masahiro Yamada
      • [U-Boot] [RFC v3 PATCH 2/4] pinctrl: add pin control uclass support   Simon Glass
  • [U-Boot] [RFC v3 PATCH 4/4] pinctrl: sandbox: add sandbox pinctrl driver   Masahiro Yamada
    • [U-Boot] [RFC v3 PATCH 4/4] pinctrl: sandbox: add sandbox pinctrl driver   Simon Glass
      • [U-Boot] [RFC v3 PATCH 4/4] pinctrl: sandbox: add sandbox pinctrl driver   Masahiro Yamada
• [U-Boot] [RFC v3 PATCH 1/4] dm: do not return pointer if NULL is given to devp of device_bind()   Masahiro Yamada
  • [U-Boot] [RFC v3 PATCH 1/4] dm: do not return pointer if NULL is given to devp of device_bind()   Simon Glass
    • [U-Boot] [RFC v3 PATCH 1/4] dm: do not return pointer if NULL is given to devp of device_bind()   Masahiro Yamada
• [U-Boot] [RFC v3 PATCH 3/4] pinctrl: add simple pinctrl implementation   Masahiro Yamada
  • [U-Boot] [RFC v3 PATCH 3/4] pinctrl: add simple pinctrl implementation   Simon Glass
    • [U-Boot] [RFC v3 PATCH 3/4] pinctrl: add simple pinctrl implementation   Masahiro Yamada
• [U-Boot] [PATCH] dm: simplify uclass_foreach_dev() implementation   Masahiro Yamada
  • [U-Boot] [PATCH] dm: simplify uclass_foreach_dev() implementation   Simon Glass
    • [U-Boot] [PATCH] dm: simplify uclass_foreach_dev() implementation   Simon Glass
• [U-Boot] [PATCH 1/2] ddr: altera: Replace float multiplication with integer one   Marek Vasut
  • [U-Boot] [PATCH 1/2] ddr: altera: Replace float multiplication with integer one   Dinh Nguyen
    • [U-Boot] [PATCH 1/2] ddr: altera: Replace float multiplication with integer one   Marek Vasut
• [U-Boot] [PATCH 2/2] ddr: altera: Repair uninited variable   Marek Vasut
  • [U-Boot] [PATCH 2/2] ddr: altera: Repair uninited variable   Dinh Nguyen
    • [U-Boot] [PATCH 2/2] ddr: altera: Repair uninited variable   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Fix delay in freeze controller   Marek Vasut
  • [U-Boot] [PATCH] arm: socfpga: Fix delay in freeze controller   Dinh Nguyen
    • [U-Boot] [PATCH] arm: socfpga: Fix delay in freeze controller   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Fix delay in clock manager   Marek Vasut
  • [U-Boot] [PATCH] arm: socfpga: Fix delay in clock manager   Dinh Nguyen
    • [U-Boot] [PATCH] arm: socfpga: Fix delay in clock manager   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Make the DT mmc node consistent   Marek Vasut
  • [U-Boot] [PATCH] arm: socfpga: Make the DT mmc node consistent   Dinh Nguyen
    • [U-Boot] [PATCH] arm: socfpga: Make the DT mmc node consistent   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Do not enable gmac1 in Cyclone V dtsi   Marek Vasut
  • [U-Boot] [PATCH] arm: socfpga: Do not enable gmac1 in Cyclone V dtsi   Dinh Nguyen
    • [U-Boot] [PATCH] arm: socfpga: Do not enable gmac1 in Cyclone V dtsi   Marek Vasut
• [U-Boot] [PATCH 0/8] arm: socfpga: Board cleanup   Marek Vasut
  • [U-Boot] [PATCH 1/8] arm: socfpga: Move wrappers into platform directory   Marek Vasut
  • [U-Boot] [PATCH 2/8] arm: socfpga: Unbind CPU type from board type   Marek Vasut
  • [U-Boot] [PATCH 4/8] arm: socfpga: Remove CV-specific parts from AV-SoCDK   Marek Vasut
  • [U-Boot] [PATCH 6/8] arm: socfpga: Add qts-filter.sh script   Marek Vasut
  • [U-Boot] [PATCH 7/8] arm: socfpga: Switch to filtered QTS files   Marek Vasut
  • [U-Boot] [PATCH 8/8] arm: socfpga: Make the pinmux table const u8   Marek Vasut
    • [U-Boot] [PATCH 8/8] arm: socfpga: Make the pinmux table const u8   Dinh Nguyen
      • [U-Boot] [PATCH 8/8] arm: socfpga: Make the pinmux table const u8   Marek Vasut
      • [U-Boot] [PATCH 8/8] arm: socfpga: Make the pinmux table const u8   Jian.Luo4
      • [U-Boot] [PATCH 8/8] arm: socfpga: Make the pinmux table const u8   Marek Vasut
  • [U-Boot] [PATCH 0/8] arm: socfpga: Board cleanup   Marek Vasut
    • [U-Boot] [PATCH 0/8] arm: socfpga: Board cleanup   Dinh Nguyen
      • [U-Boot] [PATCH 0/8] arm: socfpga: Board cleanup   Marek Vasut
  • [U-Boot] [PATCH 0/8] arm: socfpga: Board cleanup   Dinh Nguyen
• [U-Boot] [PATCH 3/8] arm: socfpga: Split Altera socfpga into AV and CV SoCDK   Marek Vasut
• [U-Boot] [PATCH 5/8] arm: socfpga: Remove AV-specific parts from CV-SoCDK   Marek Vasut
• [U-Boot] [PATCH v3 50/54] mkimage: Set up a file size parameter and keep it updated   Marek Vasut
  • [U-Boot] [PATCH v3 50/54] mkimage: Set up a file size parameter and keep it updated   Marek Vasut
• [U-Boot] debugging malloc heap corruption on 2015.04   Chris Packham
  • [U-Boot] debugging malloc heap corruption on 2015.04   Chris Packham
• [U-Boot] [PATCH] arm: mxs: Fix mkimage invocation   Marek Vasut
  • [U-Boot] [PATCH] arm: mxs: Fix mkimage invocation   Simon Glass
    • [U-Boot] [PATCH] arm: mxs: Fix mkimage invocation   Marek Vasut
      • [U-Boot] [PATCH] arm: mxs: Fix mkimage invocation   Simon Glass
      • [U-Boot] [PATCH] arm: mxs: Fix mkimage invocation   Stefano Babic
• [U-Boot] [PATCH v2 0/5] x86: Move x86 to use board_init_f_mem() instead of assembler   Simon Glass
  • [U-Boot] [PATCH v2 1/5] x86: Remove init_gd() function   Simon Glass
    • [U-Boot] [PATCH v2 1/5] x86: Remove init_gd() function   Simon Glass
  • [U-Boot] [PATCH v2 2/5] Align global_data to a 16-byte boundary   Simon Glass
    • [U-Boot] [PATCH v2 2/5] Align global_data to a 16-byte boundary   Bin Meng
      • [U-Boot] [PATCH v2 2/5] Align global_data to a 16-byte boundary   Simon Glass
  • [U-Boot] [PATCH v2 3/5] Allow arch-specific setting of global_data in board_init_f_mem()   Simon Glass
    • [U-Boot] [PATCH v2 3/5] Allow arch-specific setting of global_data in board_init_f_mem()   Bin Meng
      • [U-Boot] [PATCH v2 3/5] Allow arch-specific setting of global_data in board_init_f_mem()   Simon Glass
  • [U-Boot] [PATCH v2 4/5] x86: Move the GDT into global_data   Simon Glass
    • [U-Boot] [PATCH v2 4/5] x86: Move the GDT into global_data   Simon Glass
  • [U-Boot] [PATCH v2 5/5] x86: Switch to using generic global_data setup   Simon Glass
    • [U-Boot] [PATCH v2 5/5] x86: Switch to using generic global_data setup   Bin Meng
      • [U-Boot] [PATCH v2 5/5] x86: Switch to using generic global_data setup   Simon Glass
• [U-Boot] [PATCH] Revert "dm: pci: Allow scan bridge child devices before relocation"   Simon Glass
  • [U-Boot] [PATCH] Revert "dm: pci: Allow scan bridge child devices before relocation"   Bin Meng
    • [U-Boot] [PATCH] Revert "dm: pci: Allow scan bridge child devices before relocation"   Simon Glass
• [U-Boot] [PATCH 08/18] sandbox: Use the reset driver to handle reset   Stephen Warren
  • [U-Boot] [PATCH 08/18] sandbox: Use the reset driver to handle reset   Simon Glass
• [U-Boot] [PATCH v3 1/3] x86: Convert minnowmax to use CONFIG_DM_USB   Simon Glass
  • [U-Boot] [PATCH v3 2/3] x86: Convert minnowmax to use CONFIG_DM_NET   Simon Glass
    • [U-Boot] [PATCH v3 2/3] x86: Convert minnowmax to use CONFIG_DM_NET   Bin Meng
      • [U-Boot] [PATCH v3 2/3] x86: Convert minnowmax to use CONFIG_DM_NET   Simon Glass
  • [U-Boot] [PATCH v3 3/3] x86: Show the un-relocated IP address in exceptions   Simon Glass
    • [U-Boot] [PATCH v3 3/3] x86: Show the un-relocated IP address in exceptions   Bin Meng
      • [U-Boot] [PATCH v3 3/3] x86: Show the un-relocated IP address in exceptions   Simon Glass
  • [U-Boot] [PATCH v3 1/3] x86: Convert minnowmax to use CONFIG_DM_USB   Bin Meng
    • [U-Boot] [PATCH v3 1/3] x86: Convert minnowmax to use CONFIG_DM_USB   Simon Glass
• [U-Boot] [PATCH] fs-test.sh: minor fixes   Stephen Warren
  • [U-Boot] [PATCH] fs-test.sh: minor fixes   Suriyan Ramasami
    • [U-Boot] [PATCH] fs-test.sh: minor fixes   Stephen Warren
      • [U-Boot] [PATCH] fs-test.sh: minor fixes   Suriyan Ramasami
  • [U-Boot] fs-test.sh: minor fixes   Tom Rini
• [U-Boot] [PATCH 0/3] arm, imx6: aristainetos board updates   Heiko Schocher
  • [U-Boot] [PATCH 1/3] arm, imx6: aristainetos board updates   Heiko Schocher
    • [U-Boot] [PATCH 1/3] arm, imx6: aristainetos board updates   Stefano Babic
  • [U-Boot] [PATCH 2/3] arm, imx6: add aristainetos 2b board version   Heiko Schocher
  • [U-Boot] [PATCH 3/3] video, lg4573: make spi bus and cs configurable   Heiko Schocher
  • [U-Boot] [PATCH 0/3] arm, imx6: aristainetos board updates   Stefano Babic
• [U-Boot] [PATCH v2] powerpc/fsl: support low power boot for e500 and later   Dongsheng Wang
  • [U-Boot] [PATCH v2] powerpc/fsl: support low power boot for e500 and later   Scott Wood
    • [U-Boot] [PATCH v2] powerpc/fsl: support low power boot for e500 and later   Wang Dongsheng
      • [U-Boot] [PATCH v2] powerpc/fsl: support low power boot for e500 and later   Scott Wood
      • [U-Boot] [PATCH v2] powerpc/fsl: support low power boot for e500 and later   Wang Dongsheng
      • [U-Boot] [PATCH v2] powerpc/fsl: support low power boot for e500 and later   Scott Wood
• [U-Boot] [PATCH] dfu: Delete superfluous initialization of the dfu_buf_size static variable   Przemyslaw Marczak
• [U-Boot] [ELCE 2015][Presentation] Proposal for U-boot Mini Summit presentation   Lukasz Majewski
  • [U-Boot] [ELCE 2015][Presentation] Proposal for U-boot Mini Summit presentation   Stefan Roese
    • [U-Boot] [ELCE 2015][Presentation] Proposal for U-boot Mini Summit presentation   Lukasz Majewski
      • [U-Boot] [ELCE 2015][Presentation] Proposal for U-boot Mini Summit presentation   Heiko Schocher
  • [U-Boot] [ELCE 2015][Presentation] Proposal for U-boot Mini Summit presentation   Simon Glass
• [U-Boot] [PATCH V5 1/2] sf: Add clear flag status register operation on Micron chips   Zhiqiang Hou
• [U-Boot] [PATCH V5 2/2] sf: Turn SPI flash chip into 3-Byte address mode   Zhiqiang Hou
  • [U-Boot] [PATCH V5 2/2] sf: Turn SPI flash chip into 3-Byte address mode   Jagan Teki
    • [U-Boot] [PATCH V5 2/2] sf: Turn SPI flash chip into 3-Byte address mode   Hou Zhiqiang
• [U-Boot] [PATCH 1/1] tools: mxsboot: calculate ECC block level dynamically   Jörg Krause
  • [U-Boot] [PATCH 1/1] tools: mxsboot: calculate ECC block level dynamically   Marek Vasut
    • [U-Boot] [PATCH 1/1] tools: mxsboot: calculate ECC block level dynamically   Stefano Babic
  • [U-Boot] [PATCH 1/1] tools: mxsboot: calculate ECC block level dynamically   Stefano Babic
• [U-Boot] ARM: sunxi: Experiences NAND flash   Olliver Schinagl
  • [U-Boot] [linux-sunxi] ARM: sunxi: Experiences NAND flash   Olliver Schinagl
    • [U-Boot] [linux-sunxi] ARM: sunxi: Experiences NAND flash   Boris Brezillon
  • [U-Boot] ARM: sunxi: Experiences NAND flash   Boris Brezillon
    • [U-Boot] [linux-sunxi] Re: ARM: sunxi: Experiences NAND flash   Michal Suchanek
    • [U-Boot] ARM: sunxi: Experiences NAND flash   Roy Spliet
    • [U-Boot] ARM: sunxi: Experiences NAND flash   Boris Brezillon
• [U-Boot] Installing u-boot for x86 (non EFI) on a disk   Stoppa, Igor
  • [U-Boot] Installing u-boot for x86 (non EFI) on a disk   Bin Meng
    • [U-Boot] Installing u-boot for x86 (non EFI) on a disk   Stoppa, Igor
      • [U-Boot] Installing u-boot for x86 (non EFI) on a disk   Bin Meng
• [U-Boot] [PATCH v2 0/6] net: Move e1000 driver to driver model and Kconfig   Simon Glass
  • [U-Boot] [PATCH v2 5/6] Tidy up some defconfig files   Simon Glass
    • [U-Boot] [PATCH v2 5/6] Tidy up some defconfig files   Tom Warren
      • [U-Boot] [PATCH v2 5/6] Tidy up some defconfig files   Simon Glass
    • [U-Boot] [PATCH v2 5/6] Tidy up some defconfig files   Joe Hershberger
      • [U-Boot] [PATCH v2 5/6] Tidy up some defconfig files   Simon Glass
  • [U-Boot] [PATCH v2 6/6] net: Move CONFIG_E1000 options to Kconfig   Simon Glass
    • [U-Boot] [PATCH v2 6/6] net: Move CONFIG_E1000 options to Kconfig   Joe Hershberger
      • [U-Boot] [PATCH v2 6/6] net: Move CONFIG_E1000 options to Kconfig   Simon Glass
      • [U-Boot] [PATCH v2 6/6] net: Move CONFIG_E1000 options to Kconfig   Joe Hershberger
  • [U-Boot] [PATCH v2 0/6] net: Move e1000 driver to driver model and Kconfig   Marcel Ziswiler
• [U-Boot] [PATCH v2 1/6] net: e1000: Move #include of common.h to the C files   Simon Glass
  • [U-Boot] [PATCH v2 1/6] net: e1000: Move #include of common.h to the C files   Joe Hershberger
• [U-Boot] [PATCH v2 2/6] net: e1000: Prepare for driver model conversion   Simon Glass
  • [U-Boot] [PATCH v2 2/6] net: e1000: Prepare for driver model conversion   Joe Hershberger
• [U-Boot] [PATCH v2 3/6] net: e1000: Convert to driver model   Simon Glass
  • [U-Boot] [PATCH v2 3/6] net: e1000: Convert to driver model   Joe Hershberger
    • [U-Boot] [PATCH v2 3/6] net: e1000: Convert to driver model   Simon Glass
      • [U-Boot] [PATCH v2 3/6] net: e1000: Convert to driver model   Joe Hershberger
      • [U-Boot] [PATCH v2 3/6] net: e1000: Convert to driver model   Simon Glass
  • [U-Boot] [PATCH v2 3/6] net: e1000: Convert to driver model   Bin Meng
• [U-Boot] [PATCH v2 4/6] net: e1000: Add Kconfig options   Simon Glass
  • [U-Boot] [PATCH v2 4/6] net: e1000: Add Kconfig options   Joe Hershberger
• [U-Boot] [PATCH] dm: Use dev_get_addr() where possible   Simon Glass
  • [U-Boot] [PATCH] dm: Use dev_get_addr() where possible   Joe Hershberger
  • [U-Boot] [PATCH] dm: Use dev_get_addr() where possible   Stephen Warren
    • [U-Boot] [PATCH] dm: Use dev_get_addr() where possible   Simon Glass
      • [U-Boot] [PATCH] dm: Use dev_get_addr() where possible   Simon Glass
      • [U-Boot] [PATCH] dm: Use dev_get_addr() where possible   Simon Glass
• [U-Boot] [PATCH 00/25] dm: Convert TPM drivers to driver model   Simon Glass
  • [U-Boot] [PATCH 01/25] tpm: Remove old pre-driver-model I2C code   Simon Glass
    • [U-Boot] [PATCH 01/25] tpm: Remove old pre-driver-model I2C code   christophe.ricard
      • [U-Boot] [PATCH 01/25] tpm: Remove old pre-driver-model I2C code   Simon Glass
  • [U-Boot] [PATCH 02/25] tpm: Drop two unused options   Simon Glass
    • [U-Boot] [PATCH 02/25] tpm: Drop two unused options   christophe.ricard
  • [U-Boot] [PATCH 03/25] tpm: Add Kconfig options for TPMs   Simon Glass
    • [U-Boot] [PATCH 03/25] tpm: Add Kconfig options for TPMs   christophe.ricard
      • [U-Boot] [PATCH 03/25] tpm: Add Kconfig options for TPMs   Simon Glass
  • [U-Boot] [PATCH 04/25] tpm: Convert board config TPM options to Kconfig   Simon Glass
    • [U-Boot] [PATCH 04/25] tpm: Convert board config TPM options to Kconfig   christophe.ricard
  • [U-Boot] [PATCH 05/25] tpm: Convert drivers to use SPDX   Simon Glass
    • [U-Boot] [PATCH 05/25] tpm: Convert drivers to use SPDX   christophe.ricard
  • [U-Boot] [PATCH 06/25] tpm: Move the I2C TPM code into one file   Simon Glass
    • [U-Boot] [PATCH 06/25] tpm: Move the I2C TPM code into one file   christophe.ricard
      • [U-Boot] [PATCH 06/25] tpm: Move the I2C TPM code into one file   Simon Glass
      • [U-Boot] [PATCH 06/25] tpm: Move the I2C TPM code into one file   Christophe Ricard
  • [U-Boot] [PATCH 07/25] tpm: tpm_tis_i2c: Drop unnecessary methods   Simon Glass
    • [U-Boot] [PATCH 07/25] tpm: tpm_tis_i2c: Drop unnecessary methods   christophe.ricard
      • [U-Boot] [PATCH 07/25] tpm: tpm_tis_i2c: Drop unnecessary methods   Simon Glass
      • [U-Boot] [PATCH 07/25] tpm: tpm_tis_i2c: Drop unnecessary methods   Christophe Ricard
      • [U-Boot] [PATCH 07/25] tpm: tpm_tis_i2c: Drop unnecessary methods   Simon Glass
  • [U-Boot] [PATCH 08/25] tpm: tpm_tis_i2c: Drop struct tpm_vendor_specific   Simon Glass
    • [U-Boot] [PATCH 08/25] tpm: tpm_tis_i2c: Drop struct tpm_vendor_specific   christophe.ricard
      • [U-Boot] [PATCH 08/25] tpm: tpm_tis_i2c: Drop struct tpm_vendor_specific   Simon Glass
      • [U-Boot] [PATCH 08/25] tpm: tpm_tis_i2c: Drop struct tpm_vendor_specific   Christophe Ricard
      • [U-Boot] [PATCH 08/25] tpm: tpm_tis_i2c: Drop struct tpm_vendor_specific   Simon Glass
  • [U-Boot] [PATCH 09/25] tpm: tpm_tis_i2c: Merge struct tpm_dev into tpm_chip   Simon Glass
    • [U-Boot] [PATCH 09/25] tpm: tpm_tis_i2c: Merge struct tpm_dev into tpm_chip   christophe.ricard
  • [U-Boot] [PATCH 10/25] tpm: tpm_tis_i2c: Merge struct tpm into tpm_chip   Simon Glass
    • [U-Boot] [PATCH 10/25] tpm: tpm_tis_i2c: Merge struct tpm into tpm_chip   christophe.ricard
  • [U-Boot] [PATCH 11/25] tpm: tpm_tis_i2c: Move definitions into the header file   Simon Glass
    • [U-Boot] [PATCH 11/25] tpm: tpm_tis_i2c: Move definitions into the header file   christophe.ricard
  • [U-Boot] [PATCH 12/25] tpm: tpm_tis_i2c: Simplify init code   Simon Glass
    • [U-Boot] [PATCH 12/25] tpm: tpm_tis_i2c: Simplify init code   christophe.ricard
  • [U-Boot] [PATCH 13/25] tpm: tpm_tis_i2c: Use a consistent tpm_tis_i2c_ prefix   Simon Glass
    • [U-Boot] [PATCH 13/25] tpm: tpm_tis_i2c: Use a consistent tpm_tis_i2c_ prefix   christophe.ricard
  • [U-Boot] [PATCH 14/25] tpm: tpm_tis_i2c: Tidy up delays   Simon Glass
    • [U-Boot] [PATCH 14/25] tpm: tpm_tis_i2c: Tidy up delays   christophe.ricard
  • [U-Boot] [PATCH 15/25] dm: tpm: Add a uclass for Trusted Platform Modules   Simon Glass
    • [U-Boot] [PATCH 15/25] dm: tpm: Add a uclass for Trusted Platform Modules   christophe.ricard
  • [U-Boot] [PATCH 16/25] dm: tpm: Convert the TPM command and library to driver model   Simon Glass
    • [U-Boot] [PATCH 16/25] dm: tpm: Convert the TPM command and library to driver model   christophe.ricard
  • [U-Boot] [PATCH 17/25] dm: i2c: Add a command to adjust the offset length   Simon Glass
  • [U-Boot] [PATCH 18/25] tpm: Report tpm errors on the command line   Simon Glass
    • [U-Boot] [PATCH 18/25] tpm: Report tpm errors on the command line   christophe.ricard
  • [U-Boot] [PATCH 19/25] dm: tpm: sandbox: Convert TPM driver to driver model   Simon Glass
    • [U-Boot] [PATCH 19/25] dm: tpm: sandbox: Convert TPM driver to driver model   christophe.ricard
  • [U-Boot] [PATCH 20/25] tpm: Check that parse_byte_string() has data to parse   Simon Glass
    • [U-Boot] [PATCH 20/25] tpm: Check that parse_byte_string() has data to parse   christophe.ricard
  • [U-Boot] [PATCH 21/25] exynos: x86: dts: Add tpm nodes to the device tree for Chrome OS devices   Simon Glass
  • [U-Boot] [PATCH 22/25] dm: tpm: Convert I2C driver to driver model   Simon Glass
    • [U-Boot] [PATCH 22/25] dm: tpm: Convert I2C driver to driver model   christophe.ricard
  • [U-Boot] [PATCH 23/25] dm: tpm: Convert LPC driver to driver model   Simon Glass
    • [U-Boot] [PATCH 23/25] dm: tpm: Convert LPC driver to driver model   christophe.ricard
  • [U-Boot] [PATCH 24/25] tpm: Add a 'tpm info' command   Simon Glass
    • [U-Boot] [PATCH 24/25] tpm: Add a 'tpm info' command   christophe.ricard
  • [U-Boot] [PATCH 25/25] tegra: nyan: Enable TPM command and driver   Simon Glass
    • [U-Boot] [PATCH 25/25] tegra: nyan: Enable TPM command and driver   christophe.ricard
  • [U-Boot] [PATCH 00/25] dm: Convert TPM drivers to driver model   christophe.ricard
    • [U-Boot] [PATCH 00/25] dm: Convert TPM drivers to driver model   Simon Glass
      • [U-Boot] [PATCH 00/25] dm: Convert TPM drivers to driver model   Christophe Ricard
      • [U-Boot] [PATCH 00/25] dm: Convert TPM drivers to driver model   Simon Glass
      • [U-Boot] [PATCH 00/25] dm: Convert TPM drivers to driver model   Simon Glass
• [U-Boot] [PATCH V2 00/10] Replace the FAT filesystem code   Stephen Warren
  • [U-Boot] [PATCH V2 02/10] fat: move to a different directory   Stephen Warren
  • [U-Boot] [PATCH V2 03/10] fat: add ff.c implementation   Stephen Warren
  • [U-Boot] [PATCH V2 05/10] fat: ff: add ifdef to avoid unused function warning   Stephen Warren
  • [U-Boot] [PATCH V2 06/10] fat: ffconf.h changes for U-Boot port   Stephen Warren
    • [U-Boot] [PATCH V2 06/10] fat: ffconf.h changes for U-Boot port   Tom Rini
      • [U-Boot] [PATCH V2 06/10] fat: ffconf.h changes for U-Boot port   Stephen Warren
      • [U-Boot] [PATCH V2 06/10] fat: ffconf.h changes for U-Boot port   Tom Rini
      • [U-Boot] [PATCH V2 06/10] fat: ffconf.h changes for U-Boot port   Stephen Warren
  • [U-Boot] [PATCH V2 07/10] fat: port integer.h to U-Boot types   Stephen Warren
  • [U-Boot] [PATCH V2 08/10] fat: add U-Boot to ff.c API conversion wrapper   Stephen Warren
  • [U-Boot] [PATCH V2 09/10] fat: switch to new FAT implementation   Stephen Warren
  • [U-Boot] [PATCH V2 10/10] fat: remove old implementation   Stephen Warren
  • [U-Boot] [PATCH V2 00/10] Replace the FAT filesystem code   Simon Glass
    • [U-Boot] [PATCH V2 00/10] Replace the FAT filesystem code   Stephen Warren
  • [U-Boot] [PATCH V2 00/10] Replace the FAT filesystem code   Tom Rini
• [U-Boot] [PATCH V2 01/10] disk: support host devices in dev_print()   Stephen Warren
• [U-Boot] [PATCH V2 04/10] fat: apply upstream bugfix to ff.c   Stephen Warren
• [U-Boot] [PATCH 1/5] arm: mvebu: sdram: Enable ECC support on Armada XP   Stefan Roese
  • [U-Boot] [PATCH 2/5] arm: mvebu: Display ECC enabled / disabled upon bootup   Stefan Roese
  • [U-Boot] [PATCH 3/5] arm: mvebu: Move CONFIG_SYS_TEXT_BASE to an address < 16 MiB   Stefan Roese
• [U-Boot] [PATCH 4/5] arm: mvebu: dram.c: Rework dram_init() and dram_init_banksize()   Stefan Roese
• [U-Boot] [PATCH 5/5] arm: mvebu: Add complete SDRAM ECC scrubbing   Stefan Roese
• [U-Boot] [PATCH] net: e1000: Increase autoneg timeout to 8 seconds   Stefan Roese
  • [U-Boot] [PATCH] net: e1000: Increase autoneg timeout to 8 seconds   Joe Hershberger
• [U-Boot] [PATCH 1/3] pci: mvebu: Add PCIe driver   Stefan Roese
• [U-Boot] [PATCH 2/3] arm: mvebu: db-mv784mp-gp: Enable PCI support   Stefan Roese
• [U-Boot] [PATCH 3/3] arm: mvebu: db-88f6820-gp: Enable PCI support   Stefan Roese
• [U-Boot] [PATCH v5 01/13] power: pmic: add pfuze3000 support   Adrian Alonso
  • [U-Boot] [PATCH v5 02/13] imx: iomux-v3: add imx7d support for iomuxc   Adrian Alonso
    • [U-Boot] [PATCH v5 02/13] imx: iomux-v3: add imx7d support for iomuxc   Stefano Babic
  • [U-Boot] [PATCH v5 03/13] imx: mxc_gpio: add support for imx7d SoC   Adrian Alonso
    • [U-Boot] [PATCH v5 03/13] imx: mxc_gpio: add support for imx7d SoC   Stefano Babic
  • [U-Boot] [PATCH v5 04/13] imx: ocotp: mxc add i.MX7D support   Adrian Alonso
    • [U-Boot] [PATCH v5 04/13] imx: ocotp: mxc add i.MX7D support   Stefano Babic
  • [U-Boot] [PATCH v5 05/13] imx: mx7 dm thermal driver support   Adrian Alonso
    • [U-Boot] [PATCH v5 05/13] imx: mx7 dm thermal driver support   Stefano Babic
      • [U-Boot] [PATCH v5 05/13] imx: mx7 dm thermal driver support   Alonso Adrian
  • [U-Boot] [PATCH v5 06/13] imx: system counter driver for imx7d and mx6ul   Adrian Alonso
    • [U-Boot] [PATCH v5 06/13] imx: system counter driver for imx7d and mx6ul   Stefano Babic
      • [U-Boot] [PATCH v5 06/13] imx: system counter driver for imx7d and mx6ul   Alonso Adrian
      • [U-Boot] [PATCH v5 06/13] imx: system counter driver for imx7d and mx6ul   Stefano Babic
  • [U-Boot] [PATCH v5 07/13] imx: imx7d: initial arch level support   Adrian Alonso
    • [U-Boot] [PATCH v5 07/13] imx: imx7d: initial arch level support   Stefano Babic
  • [U-Boot] [PATCH v5 08/13] imx: imx7d: clock control module support   Adrian Alonso
  • [U-Boot] [PATCH v5 09/13] imx: imx7d: Add SoC system support   Adrian Alonso
    • [U-Boot] [PATCH v5 09/13] imx: imx7d: Add SoC system support   Stefano Babic
      • [U-Boot] [PATCH v5 09/13] imx: imx7d: Add SoC system support   Alonso Adrian
  • [U-Boot] [PATCH v5 10/13] imx: imx7d: add hab secure boot support   Adrian Alonso
    • [U-Boot] [PATCH v5 10/13] imx: imx7d: add hab secure boot support   Stefano Babic
  • [U-Boot] [PATCH v5 11/13] imx: imx7d: add timer support for imx7d   Adrian Alonso
  • [U-Boot] [PATCH v5 12/13] imx: imx7d: add imx-common cpu support for imx7d   Adrian Alonso
  • [U-Boot] [PATCH v5 13/13] imx: mx7dsabresd: Add support for MX7D SABRESD board   Adrian Alonso
  • [U-Boot] [PATCH v5 01/13] power: pmic: add pfuze3000 support   Stefano Babic
  • [U-Boot] [PATCH v5 01/13] power: pmic: add pfuze3000 support   Stefano Babic
• [U-Boot] [PATCH 1/2] net: phy: broadcom: Add BCM Cygnus PHY   Joe Hershberger
  • [U-Boot] [PATCH 1/2] net: phy: broadcom: Add BCM Cygnus PHY   Joe Hershberger
• [U-Boot] [PATCH] lpc32xx: move common SLC NAND defines to arch/config.h   Vladimir Zapolskiy
  • [U-Boot] [PATCH] lpc32xx: move common SLC NAND defines to arch/config.h   LEMIEUX, SYLVAIN
    • [U-Boot] [PATCH] lpc32xx: move common SLC NAND defines to arch/config.h   Vladimir Zapolskiy
      • [U-Boot] [PATCH] lpc32xx: move common SLC NAND defines to arch/config.h   LEMIEUX, SYLVAIN
  • [U-Boot] lpc32xx: move common SLC NAND defines to arch/config.h   Tom Rini
• [U-Boot] LPC32xx changes   Vladimir Zapolskiy
  • [U-Boot] LPC32xx changes   Tom Rini
    • [U-Boot] LPC32xx changes   LEMIEUX, SYLVAIN
      • [U-Boot] LPC32xx changes   Tom Rini
• [U-Boot] [PATCH 7/7] net: lpc32xx: eth buffers base config   Joe Hershberger
• [U-Boot] [PATCH] zynq: enable CONFIG_NET_RANDOM_ETHADDR   Joe Hershberger
  • [U-Boot] [PATCH] zynq: enable CONFIG_NET_RANDOM_ETHADDR   Michal Simek
• [U-Boot] [PATCH 2/2] arm: bcmcygnus: Enable Ethernet support   Joe Hershberger
• [U-Boot] [PATCH] x86: Drop FSP error defines and use EFI instead   Simon Glass
  • [U-Boot] [PATCH] x86: Drop FSP error defines and use EFI instead   Bin Meng
• [U-Boot] [PATCH 3/3 V2] dm9000: rework dm9000 to support multiple devices   Joe Hershberger
  • [U-Boot] [PATCH 3/3 V2] dm9000: rework dm9000 to support multiple devices   Andrew Ruder
• [U-Boot] net/fm: Update FMan Compatibels   Joe Hershberger
  • [U-Boot] net/fm: Update FMan Compatibels   Liberman Igal
• [U-Boot] [PATCH v1 2/3] sparc: Add MDIO support to GRETH driver   Joe Hershberger
• [U-Boot] [PATCH] net/phy: set led for rtl8211f phy   Joe Hershberger
  • [U-Boot] [PATCH] net/phy: set led for rtl8211f phy   Joe Hershberger
• [U-Boot] [PATCH] net: macb: add gmac multi-queue support   Joe Hershberger
  • [U-Boot] [PATCH] net: macb: add gmac multi-queue support   Josh Wu
    • [U-Boot] [PATCH] net: macb: add gmac multi-queue support   Joe Hershberger
  • [U-Boot] [PATCH] net: macb: add gmac multi-queue support   Joe Hershberger
• [U-Boot] [PATCH v3] net: TFTP: add timer count environment variable   Joe Hershberger
  • [U-Boot] [PATCH v3] net: TFTP: add timer count environment variable   Joe Hershberger
    • [U-Boot] [PATCH v3] net: TFTP: add timer count environment variable   Albert ARIBAUD
• [U-Boot] [PATCH 1/5] Make RBTREE selectable by Kconfig   Joe Hershberger
  • [U-Boot] [PATCH 1/5] Make RBTREE selectable by Kconfig   Joe Hershberger
    • [U-Boot] [PATCH 1/5] Make RBTREE selectable by Kconfig   Tom Rini
      • [U-Boot] [PATCH 1/5] Make RBTREE selectable by Kconfig   Joe Hershberger
    • [U-Boot] [PATCH 1/5] Make RBTREE selectable by Kconfig   Lars Poeschel
• [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes   vikasm
  • [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes   Stefan Roese
    • [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes   Jagan Teki
      • [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes   vikasm
      • [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes   Marek Vasut
      • [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes   vikasm
      • [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes   Marek Vasut
      • [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes   vikasm
      • [U-Boot] [PATCH RESEND 0/7] spi: cadence_qspi: optimize & fix indirect rd-writes   Marek Vasut
• [U-Boot] [PATCH v3 00/15] Add macros to ease our life with independent CONFIGs between U-Boot and SPL   Masahiro Yamada
  • [U-Boot] [PATCH v3 14/15] of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL   Masahiro Yamada
    • [U-Boot] [PATCH v3 14/15] of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL   Marek Vasut
      • [U-Boot] [PATCH v3 14/15] of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL   Masahiro Yamada
      • [U-Boot] [PATCH v3 14/15] of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL   Marek Vasut
    • [U-Boot] [U-Boot, v3, 14/15] of: flip CONFIG_SPL_DISABLE_OF_CONTROL into CONFIG_SPL_OF_CONTROL   Tom Rini
  • [U-Boot] [PATCH v3 15/15] of: clean up OF_CONTROL ifdef conditionals   Masahiro Yamada
    • [U-Boot] [PATCH v3 15/15] of: clean up OF_CONTROL ifdef conditionals   Masahiro Yamada
    • [U-Boot] [U-Boot, v3, 15/15] of: clean up OF_CONTROL ifdef conditionals   Tom Rini
      • [U-Boot] [U-Boot, v3, 15/15] of: clean up OF_CONTROL ifdef conditionals   Marek Vasut
      • [U-Boot] [U-Boot, v3, 15/15] of: clean up OF_CONTROL ifdef conditionals   Tom Rini
      • [U-Boot] [U-Boot, v3, 15/15] of: clean up OF_CONTROL ifdef conditionals   Marek Vasut
      • [U-Boot] [U-Boot, v3, 15/15] of: clean up OF_CONTROL ifdef conditionals   Masahiro Yamada
      • [U-Boot] [U-Boot, v3, 15/15] of: clean up OF_CONTROL ifdef conditionals   Marek Vasut
      • [U-Boot] [U-Boot, v3, 15/15] of: clean up OF_CONTROL ifdef conditionals   Michal Simek
• [U-Boot] [PATCH v3 01/15] kbuild: fixdep: optimize code slightly   Masahiro Yamada
  • [U-Boot] [U-Boot, v3, 01/15] kbuild: fixdep: optimize code slightly   Tom Rini
• [U-Boot] [PATCH v3 02/15] kbuild: add a makefile macro useful with per-image config options   Masahiro Yamada
  • [U-Boot] [U-Boot, v3, 02/15] kbuild: add a makefile macro useful with per-image config options   Tom Rini
• [U-Boot] [PATCH v3 03/15] linux/kconfig.h: add CPP macros useful for per-image config options   Masahiro Yamada
  • [U-Boot] [U-Boot, v3, 03/15] linux/kconfig.h: add CPP macros useful for per-image config options   Tom Rini
• [U-Boot] [PATCH v3 04/15] spl: move SPL driver entries to driver/Makefile   Masahiro Yamada
  • [U-Boot] [U-Boot, v3, 04/15] spl: move SPL driver entries to driver/Makefile   Tom Rini
• [U-Boot] [PATCH v3 05/15] dm: unify obj-$(CONFIG_DM) and obj-$(CONFIG_SPL_DM) entries   Masahiro Yamada
  • [U-Boot] [U-Boot, v3, 05/15] dm: unify obj-$(CONFIG_DM) and obj-$(CONFIG_SPL_DM) entries   Tom Rini
• [U-Boot] [PATCH v3 06/15] clk: rename CONFIG_SPL_CLK_SUPPORT to CONFIG_SPL_CLK   Masahiro Yamada
  • [U-Boot] [U-Boot, v3, 06/15] clk: rename CONFIG_SPL_CLK_SUPPORT to CONFIG_SPL_CLK   Tom Rini
• [U-Boot] [PATCH v3 07/15] clk: unify obj-$(CONFIG_CLK) and obj-$(CONFIG_SPL_CLK) entries   Masahiro Yamada
  • [U-Boot] [U-Boot, v3, 07/15] clk: unify obj-$(CONFIG_CLK) and obj-$(CONFIG_SPL_CLK) entries   Tom Rini
• [U-Boot] [PATCH v3 08/15] ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM   Masahiro Yamada
  • [U-Boot] [U-Boot, v3, 08/15] ram: rename CONFIG_SPL_RAM_SUPPORT to CONFIG_SPL_RAM   Tom Rini
• [U-Boot] [PATCH v3 09/15] ram: unify obj-$(CONFIG_RAM) and obj-$(CONFIG_SPL_RAM) entries   Masahiro Yamada
  • [U-Boot] [U-Boot, v3, 09/15] ram: unify obj-$(CONFIG_RAM) and obj-$(CONFIG_SPL_RAM) entries   Tom Rini
• [U-Boot] [PATCH v3 10/15] led: rename CONFIG_SPL_LED_SUPPORT to CONFIG_SPL_LED   Masahiro Yamada
  • [U-Boot] [U-Boot, v3, 10/15] led: rename CONFIG_SPL_LED_SUPPORT to CONFIG_SPL_LED   Tom Rini
• [U-Boot] [PATCH v3 11/15] led: unify obj-$(CONFIG_LED) and obj-$(CONFIG_SPL_LED) entries   Masahiro Yamada
  • [U-Boot] [U-Boot, v3, 11/15] led: unify obj-$(CONFIG_LED) and obj-$(CONFIG_SPL_LED) entries   Tom Rini
• [U-Boot] [PATCH v3 12/15] dm: drop CONFIG_DM_DEVICE_REMOVE from uncmd list   Masahiro Yamada
  • [U-Boot] [U-Boot, v3, 12/15] dm: drop CONFIG_DM_DEVICE_REMOVE from uncmd list   Tom Rini
• [U-Boot] [PATCH v3 13/15] fdtdec: fix OF_CONTROL switch   Masahiro Yamada
  • [U-Boot] [U-Boot,v3,13/15] fdtdec: fix OF_CONTROL switch   Tom Rini
• [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Zhiqiang Hou
  • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Siva Durga Prasad Paladugu
    • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Hou Zhiqiang
      • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Stefan Roese
      • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Siva Durga Prasad Paladugu
      • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Jagan Teki
      • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Stefan Roese
      • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Jagan Teki
      • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Siva Durga Prasad Paladugu
      • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Hou Zhiqiang
      • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Siva Durga Prasad Paladugu
      • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Jagan Teki
      • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Siva Durga Prasad Paladugu
      • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Jagan Teki
      • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Siva Durga Prasad Paladugu
      • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Jagan Teki
  • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Siva Durga Prasad Paladugu
    • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Hou Zhiqiang
    • [U-Boot] [PATCH V6] sf: Turn SPI flash chip into 3-Byte address mode   Hou Zhiqiang
• [U-Boot] [PATCH] ls2085a: esdhc: flush D-cache before 'mmc read'   Pantelis Antoniou
  • [U-Boot] [PATCH] ls2085a: esdhc: flush D-cache before 'mmc read'   Lu Y.B.
• [U-Boot] [PATCH] mmc_spi: Big-endian support   Pantelis Antoniou
• [U-Boot] [PATCH 1/4] mmc: dw_mmc: Stop bounce buffer even in case of failure   Pantelis Antoniou
• [U-Boot] [PATCH 2/4] mmc: dw_mmc: Zap endless timeout   Pantelis Antoniou
• [U-Boot] [PATCH 3/4] mmc: dw_mmc: Improve handling of data transfer failure   Pantelis Antoniou
• [U-Boot] [PATCH v3 0/4] add dfu support for at91 sam9260 based boards   Heiko Schocher
  • [U-Boot] [PATCH v3 1/4] bitops: introduce BIT() definition   Heiko Schocher
  • [U-Boot] [PATCH v3 2/4] usb: gadget: at91_udc: port linux driver at91_udc   Heiko Schocher
  • [U-Boot] [PATCH v3 3/4] usb: gadget: at91_udc: add at91_udc into U-Boot   Heiko Schocher
  • [U-Boot] [PATCH v3 4/4] at91, taurus, smartweb: add dfu support   Heiko Schocher
• [U-Boot] [PATCH 4/4] mmc: dw_mmc: Probe the MMC from OF   Pantelis Antoniou
  • [U-Boot] [PATCH V2 4/4] mmc: dw_mmc: Probe the MMC from OF   Marek Vasut
    • [U-Boot] [PATCH V2 4/4] mmc: dw_mmc: Probe the MMC from OF   Marek Vasut
      • [U-Boot] [PATCH V2 4/4] mmc: dw_mmc: Probe the MMC from OF   Pantelis Antoniou
      • [U-Boot] [PATCH V2 4/4] mmc: dw_mmc: Probe the MMC from OF   Marek Vasut
  • [U-Boot] [PATCH 4/4] mmc: dw_mmc: Probe the MMC from OF   Marek Vasut
• [U-Boot] Pull request: u-boot-mmc 12082015   Pantelis Antoniou
  • [U-Boot] Pull request: u-boot-mmc 12082015   Marek Vasut
    • [U-Boot] Pull request: u-boot-mmc 12082015   Pantelis Antoniou
      • [U-Boot] Pull request: u-boot-mmc 12082015   Tom Rini
• [U-Boot] [PATCH] imx: mx27 implement get_cpu_rev   Peng Fan
  • [U-Boot] [PATCH] imx: mx27 implement get_cpu_rev   Stefano Babic
    • [U-Boot] [PATCH] imx: mx27 implement get_cpu_rev   Peng Fan
• [U-Boot] [PATCH V2 1/3] imx: clock support enet2 anatop clock support   Peng Fan
  • [U-Boot] [PATCH V2 2/3] net: fec: do not access reserved register for i.MX6UL   Peng Fan
    • [U-Boot] [PATCH V2 2/3] net: fec: do not access reserved register for i.MX6UL   Joe Hershberger
    • [U-Boot] [PATCH V2 2/3] net: fec: do not access reserved register for i.MX6UL   Stefano Babic
      • [U-Boot] [PATCH V2 2/3] net: fec: do not access reserved register for i.MX6UL   Stefano Babic
  • [U-Boot] [PATCH V2 3/3] imx: mx6ul_14x14_evk add ENET support   Peng Fan
    • [U-Boot] [PATCH V2 3/3] imx: mx6ul_14x14_evk add ENET support   Peng Fan
      • [U-Boot] [PATCH V2 3/3] imx: mx6ul_14x14_evk add ENET support   Stefano Babic
      • [U-Boot] [PATCH V2 3/3] imx: mx6ul_14x14_evk add ENET support   Peng Fan
      • [U-Boot] [PATCH V2 3/3] imx: mx6ul_14x14_evk add ENET support   Stefano Babic
      • [U-Boot] [PATCH V2 3/3] imx: mx6ul_14x14_evk add ENET support   Peng Fan
  • [U-Boot] [PATCH V2 1/3] imx: clock support enet2 anatop clock support   Peng Fan
    • [U-Boot] [PATCH V2 2/3] net: fec: do not access reserved register for i.MX6UL   Peng Fan
    • [U-Boot] [PATCH V2 3/3] imx: mx6ul_14x14_evk add ENET support   Peng Fan
    • [U-Boot] [PATCH V2 1/3] imx: clock support enet2 anatop clock support   Stefan Roese
  • [U-Boot] [PATCH V2 1/3] imx: clock support enet2 anatop clock support   Stefano Babic
• [U-Boot] [PATCH] zynq: Make CONFIG_OF_EMBED default case   Michal Simek
• [U-Boot] [PATCH] ls102xa: etsec: Use proper settings for BE BDs   Claudiu Manoil
  • [U-Boot] [PATCH] ls102xa: etsec: Use proper settings for BE BDs   Huan Wang
• [U-Boot] [PATCH] ARM: dts: Rename memory at 0 to memory   Michal Simek
• [U-Boot] [RESEND PATCH] usb: gadget: f_thor: Allocate request up to THOR_PACKET_SIZE   Michal Simek
  • [U-Boot] [RESEND PATCH] usb: gadget: f_thor: Allocate request up to THOR_PACKET_SIZE   Lukasz Majewski
    • [U-Boot] [RESEND PATCH] usb: gadget: f_thor: Allocate request up to THOR_PACKET_SIZE   Michal Simek
• [U-Boot] [PATCH v2] f_thor: Dont perform reset at the end of thor   Michal Simek
• [U-Boot] Pull request: u-boot-pmic   Przemyslaw Marczak
  • [U-Boot] Pull request: u-boot-pmic   Tom Rini
• [U-Boot] [PATCH] Add clarifications to the x86 README   Stoppa, Igor
  • [U-Boot] [PATCH] Add clarifications to the x86 README   Bin Meng
    • [U-Boot] [PATCH] Add clarifications to the x86 README   Stoppa, Igor
  • [U-Boot] [PATCH] Add clarifications to the x86 README   Igor Stoppa
    • [U-Boot] [PATCH] Add clarifications to the x86 README   Bin Meng
      • [U-Boot] [PATCH] Add clarifications to the x86 README   Simon Glass
      • [U-Boot] [PATCH] Add clarifications to the x86 README   Stoppa, Igor
      • [U-Boot] [PATCH] Add clarifications to the x86 README   Stoppa, Igor
      • [U-Boot] [PATCH] Add clarifications to the x86 README   Bin Meng
      • [U-Boot] [PATCH] Add clarifications to the x86 README   Simon Glass
      • [U-Boot] [PATCH] x86: Add clarifications to the x86 README   Igor Stoppa
      • [U-Boot] [PATCH] x86: Add clarifications to the x86 README   Bin Meng
      • [U-Boot] [PATCH] x86: Add clarifications to the x86 README   Stoppa, Igor
      • [U-Boot] [PATCH] x86: Add clarifications to the x86 README   Bin Meng
      • [U-Boot] [PATCH] x86: Add clarifications to the x86 README   Igor Stoppa
      • [U-Boot] [PATCH] x86: Add clarifications to the x86 README   Bin Meng
      • [U-Boot] [PATCH] x86: Add clarifications to the x86 README   Simon Glass
• [U-Boot] [PATCH] zynqmp: enable CONFIG_NET_RANDOM_ETHADDR   Michal Simek
• [U-Boot] [PATCH 1/2] spl: Fix compile warning for arm64   Gong Q.Y.
• [U-Boot] [PATCH 1/1] arm: ls102xa: timer: Fix undefined behavior   Alexander Stein
  • [U-Boot] [PATCH 1/1] arm: ls102xa: timer: Fix undefined behavior   Huan Wang
• [U-Boot] [PATCH v2] x86: Drop FSP error defines and use EFI instead   Simon Glass
  • [U-Boot] [PATCH v2] x86: Drop FSP error defines and use EFI instead   Bin Meng
• [U-Boot] [PATCH] drivers: watchdog: add MAX6373 WDT support   Tom Rini
  • [U-Boot] [PATCH v2] drivers: watchdog: add MAX6373 WDT support   rnd4 at dave-tech.it
    • [U-Boot] [PATCH v2] drivers: watchdog: add MAX6373 WDT support   Michael Trimarchi
      • [U-Boot] [PATCH v2] drivers: watchdog: add MAX6373 WDT support   Andrea Scian
• [U-Boot] TS4800 patch status   Stefano Babic
  • [U-Boot] TS4800 patch status   Damien Riegel
• [U-Boot] [PATCH] i2c: lpc32xx: correct sanity check for requested bus speed   Vladimir Zapolskiy
  • [U-Boot] [PATCH] i2c: lpc32xx: correct sanity check for requested bus speed   LEMIEUX, SYLVAIN
  • [U-Boot] i2c: lpc32xx: correct sanity check for requested bus speed   Tom Rini
• [U-Boot] [PATCH V2 0/5] DM9000 support for multiple interfaces   Andrew Ruder
  • [U-Boot] [PATCH V2 4/5] dm9000: dm9000_initialize stub   Andrew Ruder
    • [U-Boot] [PATCH V2 4/5] dm9000: dm9000_initialize stub   Joe Hershberger
    • [U-Boot] [PATCH V2 4/5] dm9000: dm9000_initialize stub   Marcel Ziswiler
      • [U-Boot] [PATCH V2 4/5] dm9000: dm9000_initialize stub   Marcel Ziswiler
  • [U-Boot] [PATCH V2 0/5] DM9000 support for multiple interfaces   Andrew Ruder
• [U-Boot] [PATCH V2 1/5] dm9000: whitespace cleanups   Andrew Ruder
  • [U-Boot] [PATCH V2 1/5] dm9000: whitespace cleanups   Joe Hershberger
• [U-Boot] [PATCH V2 2/5] dm9000: mark dump_regs() function as unused   Andrew Ruder
  • [U-Boot] [PATCH V2 2/5] dm9000: mark dump_regs() function as unused   Joe Hershberger
• [U-Boot] [PATCH V2 3/5] dm9000: Add struct eth_device * to SROM functions   Andrew Ruder
  • [U-Boot] [PATCH V2 3/5] dm9000: Add struct eth_device * to SROM functions   Joe Hershberger
    • [U-Boot] [PATCH V2 3/5] dm9000: Add struct eth_device * to SROM functions   Andrew Ruder
      • [U-Boot] [PATCH V2 3/5] dm9000: Add struct eth_device * to SROM functions   Joe Hershberger
• [U-Boot] [PATCH V2 5/5] dm9000: rework dm9000 to support multiple devices   Andrew Ruder
  • [U-Boot] [PATCH V2 5/5] dm9000: rework dm9000 to support multiple devices   Joe Hershberger
• [U-Boot] [PATCH] lpc32xx: add common USB OHCI defines for all LPC32xx boards   Vladimir Zapolskiy
  • [U-Boot] [PATCH] lpc32xx: add common USB OHCI defines for all LPC32xx boards   LEMIEUX, SYLVAIN
  • [U-Boot] lpc32xx: add common USB OHCI defines for all LPC32xx boards   Tom Rini
• [U-Boot] [PATCH] pxa: Fix boot hang by avoiding vector relocation   Andrew Ruder
  • [U-Boot] [PATCH] pxa: Fix boot hang by avoiding vector relocation   Marek Vasut
• [U-Boot] [PATCH] arm: pxa: use common timer functions   Andrew Ruder
  • [U-Boot] [PATCH] arm: pxa: use common timer functions   Andrew Ruder
  • [U-Boot] [PATCH] arm: pxa: use common timer functions   Marek Vasut
• [U-Boot] [PATCH] i2c: adding driver for pxa27x, pxa3xx, pxa25x   Andrew Ruder
  • [U-Boot] [PATCH] i2c: adding driver for pxa27x, pxa3xx, pxa25x   Marek Vasut
    • [U-Boot] [PATCH] i2c: adding driver for pxa27x, pxa3xx, pxa25x   Andrew Ruder
      • [U-Boot] [PATCH] i2c: adding driver for pxa27x, pxa3xx, pxa25x   Marek Vasut
    • [U-Boot] [PATCH] i2c: adding driver for pxa27x, pxa3xx, pxa25x   Andrew Ruder
  • [U-Boot] [PATCH] i2c: adding driver for pxa27x, pxa3xx, pxa25x   Marcel Ziswiler
    • [U-Boot] [PATCH] i2c: adding driver for pxa27x, pxa3xx, pxa25x   Marek Vasut
      • [U-Boot] [PATCH] i2c: adding driver for pxa27x, pxa3xx, pxa25x   Marcel Ziswiler
      • [U-Boot] [PATCH] i2c: adding driver for pxa27x, pxa3xx, pxa25x   Marek Vasut
• [U-Boot] [PATCH 1/2] net: Improve 88E151x PHY initialization   Joe Hershberger
• [U-Boot] [PATCH 2/2] net: Add support for Marvell 88E1510 PHY   Joe Hershberger
• [U-Boot] [PATCH] qoriq eth.c bugfix: handle received corrupted frames correctly   Joe Hershberger
• [U-Boot] [PATCH] net: davinci_emac: don't teardown inactive rx channel   Joe Hershberger
• [U-Boot] [PATCH 1/1] net: phy: fix data type of phy_id   Joe Hershberger
• [U-Boot] [PATCH 1/1] net: phy: delay only if reset handler is registered   Joe Hershberger
• [U-Boot] [Patch 1/3] e1000: releasing semaphore once no longer needed   Joe Hershberger
• [U-Boot] [Patch 2/3] Revert "e1000: fix sw fw sync on igb i210/i211"   Joe Hershberger
• [U-Boot] [Patch 3/3] e1000: remove unnecessary clearing of SWSM.SWSM_SMBI   Joe Hershberger
• [U-Boot] [PATCH 1/2] net: lpc32xx: improve MAC configuration on reset and initialization   Joe Hershberger
• [U-Boot] [PATCH 2/2] net: lpc32xx: add RMII phy mode support   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
  • [U-Boot] Pull request: u-boot-net.git master   Tom Rini
  • [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
    • [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] [PATCH 1/2] usb: dwc2: Add original Synopsys compat string   Marek Vasut
  • [U-Boot] [PATCH 2/2] usb: dwc2: Rename to dwc2_usb   Marek Vasut
  • [U-Boot] [PATCH 1/2] usb: dwc2: Add original Synopsys compat string   Marek Vasut
• [U-Boot] [PATCH 1/2] arm: socfpga: Enable USB driver model support   Marek Vasut
• [U-Boot] [PATCH 2/2] arm: socfpga: Zap hardcoded USB address from CV and AV SoCDK   Marek Vasut
  • [U-Boot] [PATCH 2/2] arm: socfpga: Zap hardcoded USB address from CV and AV SoCDK   Marek Vasut
• [U-Boot] [PATCH v4] cgtqmx6eval: Add Ethernet support   Stefano Babic
• [U-Boot] [PATCH] nitrogen6x: change maintainer   Stefano Babic
• [U-Boot] [PATCH v2 2/2] ARM: ts4800: add ethernet support   Stefano Babic
• [U-Boot] [PATCH v2 1/2] ARM: ts4800: add basic board support   Stefano Babic
• [U-Boot] [PATCH] mxs_ocotp: Shift the HBUS divider correctly   Stefano Babic
• [U-Boot] [PATCH] dfu:tests: Modify dfu_gadget_test.sh to accept USB device major:minor number   Lukasz Majewski
  • [U-Boot] [PATCH] dfu:tests: Modify dfu_gadget_test.sh to accept USB device major:minor number   Tormod Volden
    • [U-Boot] [PATCH] dfu:tests: Modify dfu_gadget_test.sh to accept USB device major:minor number   Lukasz Majewski
• [U-Boot] WRAP_LIBGCC_CALL   Peter Hanson
• [U-Boot] [PATCH v3] x86: Drop FSP error defines and use EFI instead   Simon Glass
  • [U-Boot] [PATCH v3] x86: Drop FSP error defines and use EFI instead   Bin Meng
    • [U-Boot] [PATCH v3] x86: Drop FSP error defines and use EFI instead   Simon Glass
• [U-Boot] [v2 1/6] spi: cadence_qspi: move trigger base configuration in init   Marek Vasut
  • [U-Boot] [v2 1/6] spi: cadence_qspi: move trigger base configuration in init   vikasm
    • [U-Boot] [v2 1/6] spi: cadence_qspi: move trigger base configuration in init   Marek Vasut
      • [U-Boot] [v2 1/6] spi: cadence_qspi: move trigger base configuration in init   vikasm
      • [U-Boot] [v2 1/6] spi: cadence_qspi: move trigger base configuration in init   vikas
      • [U-Boot] [v2 1/6] spi: cadence_qspi: move trigger base configuration in init   Marek Vasut
      • [U-Boot] [v2 1/6] spi: cadence_qspi: move trigger base configuration in init   vikas
      • [U-Boot] [v2 1/6] spi: cadence_qspi: move trigger base configuration in init   Marek Vasut
• [U-Boot] [PATCH 00/10] x86: gpio: Tidy up GPIO driver   Simon Glass
• [U-Boot] [PATCH 01/10] x86: Return -1 when reading a PCI config register fails   Simon Glass
  • [U-Boot] [PATCH 01/10] x86: Return -1 when reading a PCI config register fails   Bin Meng
    • [U-Boot] [PATCH 01/10] x86: Return -1 when reading a PCI config register fails   Simon Glass
• [U-Boot] [PATCH 02/10] x86: minnowmax: Add access to GPIOs E0, E1, E2   Simon Glass
• [U-Boot] [PATCH 03/10] dm: pci: Allow a PCI bus to be found without an alias   Simon Glass
  • [U-Boot] [PATCH 03/10] dm: pci: Allow a PCI bus to be found without an alias   Bin Meng
• [U-Boot] [PATCH 04/10] dm: pci: Add a comment to help find pci_hose_read_config_byte, etc.   Simon Glass
  • [U-Boot] [PATCH 04/10] dm: pci: Add a comment to help find pci_hose_read_config_byte, etc.   Bin Meng
• [U-Boot] [PATCH 05/10] x86: minnowmax: Correct pad-offset value for host_en1   Simon Glass
• [U-Boot] [PATCH 06/10] gpio: Report errors when GPIOs cannot be read   Simon Glass
• [U-Boot] [PATCH 07/10] x86: gpio: Correct calls to _ich6_gpio_set_direction()   Simon Glass
• [U-Boot] [PATCH 08/10] x86: gpio: Tidy up gpio_ich6_get_base() and callers   Simon Glass
• [U-Boot] [PATCH 09/10] WIP: x86: gpio: Handle the case where reading a GPIO fails   Simon Glass
• [U-Boot] [PATCH 10/10] WIP: x86: gpio: Make sure that output GPIOs can be read   Simon Glass
• [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   Marek Vasut
  • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   vikasm
    • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   Marek Vasut
      • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   vikas
      • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   Marek Vasut
      • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   vikas
      • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   Marek Vasut
      • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   vikas
      • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   Marek Vasut
      • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   vikas
      • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   Marek Vasut
      • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   vikas
      • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   Marek Vasut
      • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   vikas
      • [U-Boot] [v2 2/6] spi: cadence_qspi: remove sram polling from flash read   Marek Vasut
• [U-Boot] [v2 3/6] spi: cadence_qspi: remove sram polling from flash write   Marek Vasut
  • [U-Boot] [v2 3/6] spi: cadence_qspi: remove sram polling from flash write   vikasm
    • [U-Boot] [v2 3/6] spi: cadence_qspi: remove sram polling from flash write   Marek Vasut
• [U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer start address   Marek Vasut
  • [U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer start address   vikasm
    • [U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer start address   vikas
      • [U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer start address   Marek Vasut
      • [U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer start address   vikas
      • [U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer start address   Marek Vasut
      • [U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer start address   vikas
      • [U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer start address   Marek Vasut
      • [U-Boot] [v2 5/6] spi: cadence_qspi: fix base trigger address & transfer start address   Vikas MANOCHA
• [U-Boot] [PATCH V2 1/5] imx: add cpu type for i.MX2 and i.MX3   Peng Fan
  • [U-Boot] [PATCH V2 2/5] imx: mx27 implement get_cpu_rev   Peng Fan
    • [U-Boot] [PATCH V2 2/5] imx: mx27 implement get_cpu_rev   Stefano Babic
  • [U-Boot] [PATCH V2 3/5] imx: mx31 use new formula for get_cpu_rev   Peng Fan
    • [U-Boot] [PATCH V2 3/5] imx: mx31 use new formula for get_cpu_rev   Stefano Babic
  • [U-Boot] [PATCH V2 4/5] imx: mxs: reimplement get_cpu_rev   Peng Fan
    • [U-Boot] [PATCH V2 4/5] imx: mxs: reimplement get_cpu_rev   Stefano Babic
  • [U-Boot] [PATCH V2 5/5] imx-common: consolidate macros and prototypes into sys_proto.h   Peng Fan
    • [U-Boot] [PATCH V2 5/5] imx-common: consolidate macros and prototypes into sys_proto.h   Stefano Babic
  • [U-Boot] [PATCH V2 1/5] imx: add cpu type for i.MX2 and i.MX3   Stefano Babic
• [U-Boot] [U-BOOT PATCH v3 0/4] x86: This series adds ACPI support for qemu targets.   Saket Sinha
  • [U-Boot] [U-BOOT PATCH v3 1/4] x86: Added ACPI support as a configuration option.   Saket Sinha
    • [U-Boot] [U-BOOT PATCH v3 1/4] x86: Added ACPI support as a configuration option.   Bin Meng
  • [U-Boot] [U-BOOT PATCH v3 2/4] x86: Added support for ACPI table generation at the generic layer.   Saket Sinha
    • [U-Boot] [U-BOOT PATCH v3 2/4] x86: Added support for ACPI table generation at the generic layer.   Bin Meng
      • [U-Boot] [U-BOOT PATCH v3 2/4] x86: Added support for ACPI table generation at the generic layer.   Bin Meng
  • [U-Boot] [U-BOOT PATCH v3 3/4] x86: Added ACPI support for Qemu.   Saket Sinha
    • [U-Boot] [U-BOOT PATCH v3 3/4] x86: Added ACPI support for Qemu.   Bin Meng
  • [U-Boot] [U-BOOT PATCH v3 4/4] x86: Added dsdt tables for Qemu ACPI implementation.   Saket Sinha
    • [U-Boot] [U-BOOT PATCH v3 4/4] x86: Added dsdt tables for Qemu ACPI implementation.   Bin Meng
  • [U-Boot] [U-BOOT PATCH v3 0/4] x86: This series adds ACPI support for qemu targets.   Bin Meng
• [U-Boot] [PATCH v3 1/2] Makefile: Use correct timezone for U_BOOT_TZ   Chris Packham
  • [U-Boot] [PATCH v3 2/2] Makefile: Add SOURCE_DATE_TZ   Chris Packham
    • [U-Boot] [PATCH v3 2/2] Makefile: Add SOURCE_DATE_TZ   Paul Kocialkowski
      • [U-Boot] [PATCH v3 2/2] Makefile: Add SOURCE_DATE_TZ   Chris Packham
      • [U-Boot] about reproducible builds (was Re: [PATCH v3 2/2] Makefile: Add SOURCE_DATE_TZ)   Holger Levsen
      • [U-Boot] [PATCH v3 2/2] Makefile: Add SOURCE_DATE_TZ   Paul Kocialkowski
      • [U-Boot] [PATCH v3 2/2] Makefile: Add SOURCE_DATE_TZ   Tom Rini
  • [U-Boot] [PATCH v3 1/2] Makefile: Use correct timezone for U_BOOT_TZ   Andreas Bießmann
  • [U-Boot] [PATCH v3 1/2] Makefile: Use correct timezone for U_BOOT_TZ   Paul Kocialkowski
  • [U-Boot] [U-Boot, v3, 1/2] Makefile: Use correct timezone for U_BOOT_TZ   Tom Rini
• [U-Boot] [U-Boot PATCH v2 00/10] Enable edma support for ti-qspi   Vignesh R
  • [U-Boot] [U-Boot PATCH v2 00/10] Enable edma support for ti-qspi   Jagan Teki
• [U-Boot] [PATCH 00/11] x86: Improve U-Boot as the coreboot payload support   Bin Meng
  • [U-Boot] [PATCH 01/11] x86: doc: Update coreboot payload entry point address   Bin Meng
    • [U-Boot] [PATCH 01/11] x86: doc: Update coreboot payload entry point address   Simon Glass
      • [U-Boot] [PATCH 01/11] x86: doc: Update coreboot payload entry point address   Simon Glass
  • [U-Boot] [PATCH 02/11] x86: coreboot: Increase memrange entry number to 32   Bin Meng
    • [U-Boot] [PATCH 02/11] x86: coreboot: Increase memrange entry number to 32   Simon Glass
      • [U-Boot] [PATCH 02/11] x86: coreboot: Increase memrange entry number to 32   Simon Glass
  • [U-Boot] [PATCH 03/11] x86: coreboot: Correctly report E820 types   Bin Meng
    • [U-Boot] [PATCH 03/11] x86: coreboot: Correctly report E820 types   Simon Glass
      • [U-Boot] [PATCH 03/11] x86: coreboot: Correctly report E820 types   Bin Meng
      • [U-Boot] [PATCH 03/11] x86: coreboot: Correctly report E820 types   Simon Glass
  • [U-Boot] [PATCH 04/11] x86: Remove calculate_relocation_address()   Bin Meng
    • [U-Boot] [PATCH 04/11] x86: Remove calculate_relocation_address()   Simon Glass
      • [U-Boot] [PATCH 04/11] x86: Remove calculate_relocation_address()   Simon Glass
  • [U-Boot] [PATCH 05/11] x86: coreboot: Allow >=4GiB memory bank size   Bin Meng
    • [U-Boot] [PATCH 05/11] x86: coreboot: Allow >=4GiB memory bank size   Simon Glass
      • [U-Boot] [PATCH 05/11] x86: coreboot: Allow >=4GiB memory bank size   Simon Glass
  • [U-Boot] [PATCH 06/11] x86: kconfig: Hide "System tables" for EFI   Bin Meng
    • [U-Boot] [PATCH 06/11] x86: kconfig: Hide "System tables" for EFI   Simon Glass
      • [U-Boot] [PATCH 06/11] x86: kconfig: Hide "System tables" for EFI   Simon Glass
  • [U-Boot] [PATCH 07/11] x86: kconfig: Hide "System tables" for coreboot   Bin Meng
    • [U-Boot] [PATCH 07/11] x86: kconfig: Hide "System tables" for coreboot   Simon Glass
      • [U-Boot] [PATCH 07/11] x86: kconfig: Hide "System tables" for coreboot   Simon Glass
  • [U-Boot] [PATCH 08/11] x86: Only include cbfs command for coreboot   Bin Meng
    • [U-Boot] [PATCH 08/11] x86: Only include cbfs command for coreboot   Simon Glass
      • [U-Boot] [PATCH 08/11] x86: Only include cbfs command for coreboot   Bin Meng
      • [U-Boot] [PATCH 08/11] x86: Only include cbfs command for coreboot   Simon Glass
  • [U-Boot] [PATCH 09/11] x86: Enable CONFIG_PCI_CONFIG_HOST_BRIDGE for all boards   Bin Meng
    • [U-Boot] [PATCH 09/11] x86: Enable CONFIG_PCI_CONFIG_HOST_BRIDGE for all boards   Simon Glass
      • [U-Boot] [PATCH 09/11] x86: Enable CONFIG_PCI_CONFIG_HOST_BRIDGE for all boards   Simon Glass
  • [U-Boot] [PATCH 10/11] video: coreboot: Save VESA mode for future use   Bin Meng
    • [U-Boot] [PATCH 10/11] video: coreboot: Save VESA mode for future use   Simon Glass
      • [U-Boot] [PATCH 10/11] video: coreboot: Save VESA mode for future use   Simon Glass
  • [U-Boot] [PATCH 11/11] x86: Set up video framebuffer for coreboot before loading kernel   Bin Meng
    • [U-Boot] [PATCH 11/11] x86: Set up video framebuffer for coreboot before loading kernel   Simon Glass
      • [U-Boot] [PATCH 11/11] x86: Set up video framebuffer for coreboot before loading kernel   Simon Glass
  • [U-Boot] [PATCH 00/11] x86: Improve U-Boot as the coreboot payload support   Simon Glass
• [U-Boot] [PATCH] net: Return -1 when ctrl+c is pressed   Michal Simek
  • [U-Boot] [PATCH] net: Return -1 when ctrl+c is pressed   Michal Simek
    • [U-Boot] [PATCH] net: Return -1 when ctrl+c is pressed   Joe Hershberger
      • [U-Boot] [PATCH] net: Return -1 when ctrl+c is pressed   Michal Simek
    • [U-Boot] [PATCH] net: Return -1 when ctrl+c is pressed   Tom Rini
• [U-Boot] [PATCH v6] mtd/nand/ubi: assortment of alignment fixes   Marcel Ziswiler
• [U-Boot] [RFC PATCH 00/28] Janitorial: powerpc: remove PowerPC non-generic boards   Masahiro Yamada
  • [U-Boot] [RFC PATCH 00/28] Janitorial: powerpc: remove PowerPC non-generic boards   Tom Rini
    • [U-Boot] [RFC PATCH 00/28] Janitorial: powerpc: remove PowerPC non-generic boards   Simon Glass
• [U-Boot] [RFC PATCH 01/28] powerpc: remove alpr support   Masahiro Yamada
• [U-Boot] [RFC PATCH 02/28] powerpc: remove csb272, csb472 support   Masahiro Yamada
• [U-Boot] [RFC PATCH 03/28] powerpc: remove lwmon5 support   Masahiro Yamada
  • [U-Boot] [RFC PATCH 03/28] powerpc: remove lwmon5 support   Stefan Roese
    • [U-Boot] [RFC PATCH 03/28] powerpc: remove lwmon5 support   Tom Rini
• [U-Boot] [RFC PATCH 04/28] powerpc: remove p3p440 support   Masahiro Yamada
• [U-Boot] [RFC PATCH 05/28] powerpc: remove pcs440ep support   Masahiro Yamada
• [U-Boot] [RFC PATCH 06/28] powerpc: remove sbc405 support   Masahiro Yamada
• [U-Boot] [RFC PATCH 07/28] powerpc: remove zeus support   Masahiro Yamada
• [U-Boot] [RFC PATCH 08/28] powerpc: remove cmi_mpc5xx support   Masahiro Yamada
• [U-Boot] [RFC PATCH 09/28] powerpc: remove canmb board support   Masahiro Yamada
• [U-Boot] [RFC PATCH 10/28] powerpc: remove inka4x0 support   Masahiro Yamada
• [U-Boot] [RFC PATCH 11/28] powerpc: remove ipek01 support   Masahiro Yamada
  • [U-Boot] [RFC PATCH 11/28] powerpc: remove ipek01 support   Anatolij Gustschin
• [U-Boot] [RFC PATCH 12/28] powerpc: remove jupiter support   Masahiro Yamada
• [U-Boot] [RFC PATCH 13/28] powerpc: remove motionpro support   Masahiro Yamada
• [U-Boot] [RFC PATCH 14/28] powerpc: remove munices support   Masahiro Yamada
• [U-Boot] [RFC PATCH 15/28] powerpc: remove pcm030 support   Masahiro Yamada
• [U-Boot] [RFC PATCH 16/28] powerpc: remove v38b support   Masahiro Yamada
• [U-Boot] [RFC PATCH 17/28] powerpc: remove socrates support   Masahiro Yamada
  • [U-Boot] [RFC PATCH 17/28] powerpc: remove socrates support   Anatolij Gustschin
• [U-Boot] [RFC PATCH 18/28] powerpc: remove stxgp3, stxssa support   Masahiro Yamada
• [U-Boot] [RFC PATCH 19/28] powerpc: remove MPC8540ADS support   Masahiro Yamada
• [U-Boot] [RFC PATCH 20/28] powerpc: remove MPC8541CDS support   Masahiro Yamada
• [U-Boot] [RFC PATCH 21/28] powerpc: remove MPC8544DS support   Masahiro Yamada
• [U-Boot] [RFC PATCH 22/28] powerpc: remove MPC8548CDS support   Masahiro Yamada
• [U-Boot] [RFC PATCH 23/28] powerpc: remove MPC8555CDS support   Masahiro Yamada
• [U-Boot] [RFC PATCH 24/28] powerpc: remove MPC8560ADS support   Masahiro Yamada
• [U-Boot] [RFC PATCH 25/28] powerpc: remove MPC8568MDS support   Masahiro Yamada
• [U-Boot] [RFC PATCH 26/28] powerpc: remove MPC8569MDS support   Masahiro Yamada
• [U-Boot] [RFC PATCH 27/28] powerpc: remove MPC8610HPCD support   Masahiro Yamada
  • [U-Boot] [RFC PATCH 27/28] powerpc: remove MPC8610HPCD support   York Sun
    • [U-Boot] [RFC PATCH 27/28] powerpc: remove MPC8610HPCD support   Tom Rini
• [U-Boot] [RFC PATCH 28/28] powerpc: remove sbc8641d support   Masahiro Yamada
  • [U-Boot] [RFC PATCH 28/28] powerpc: remove sbc8641d support   Anatolij Gustschin
    • [U-Boot] [RFC PATCH 28/28] powerpc: remove sbc8641d support   Paul Gortmaker
• [U-Boot] [PATCH] ppc4xx: Convert lwmon5 board to generic board   Stefan Roese
  • [U-Boot] ppc4xx: Convert lwmon5 board to generic board   Tom Rini
    • [U-Boot] ppc4xx: Convert lwmon5 board to generic board   Stefan Roese
• [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Stoppa, Igor
  • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Bin Meng
    • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Stoppa, Igor
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Bin Meng
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Stoppa, Igor
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Stoppa, Igor
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Simon Glass
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Bin Meng
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Stoppa, Igor
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Bin Meng
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Bin Meng
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Stoppa, Igor
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Bin Meng
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Stoppa, Igor
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Bin Meng
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Stoppa, Igor
      • [U-Boot] efi: Error building as EFI payload (both 32bit and 64 bit)   Bin Meng
• [U-Boot] [U-Boot, v4, 1/9] usb: dwc2: Call board_usb_init() from usb_lowlevel_init()   Tom Rini
• [U-Boot] ARM AM43XX: make boot-params available to U-Boot, save to env   Tom Rini
• [U-Boot] kconfiglib: update to the latest version   Tom Rini
  • [U-Boot] kconfiglib: update to the latest version   Ulf Magnusson
  • [U-Boot] kconfiglib: update to the latest version   Tom Rini
• [U-Boot] [U-Boot,v2,2/2] ARM: highbank: remove DRAM bank setup   Tom Rini
• [U-Boot] [U-Boot, 1/3] PXE: if a board has set its own value for CONFIG_BOOTP_VCI_STRING do not set the default one. Use the board set value instead   Tom Rini
• [U-Boot] [U-Boot, 2/3] Move setting CONFIG_BOOTP_VCI_STRING to before including the vexpress-common header   Tom Rini
• [U-Boot] [U-Boot, 3/3] port vexpress to use distro boot commands   Tom Rini
• [U-Boot] [U-Boot, v2, 1/3] spl, common, serial: build SPL without serial support   Tom Rini
• [U-Boot] [U-Boot, v2, 2/3] nand, atmel: remove udelay in spl_nand_erase_one()   Tom Rini
• [U-Boot] [U-Boot, v2, 3/3] arm, at91: support for sam9260 based smwartweb board   Tom Rini
  • [U-Boot] [U-Boot, v2, 3/3] arm, at91: support for sam9260 based smwartweb board   Heiko Schocher
• [U-Boot] [U-Boot, v2, 1/8] JFFS2: Return early when file read not necessary   Tom Rini
• [U-Boot] [U-Boot, v2, 2/8] JFFS2: Speed up and fix comparison functions   Tom Rini
• [U-Boot] [U-Boot, v2, 3/8] JFFS2: Only list each directory entry once   Tom Rini
• [U-Boot] [U-Boot, v2, 4/8] JFFS2: Improve speed reading flash files   Tom Rini
• [U-Boot] [U-Boot, v2, 5/8] JFFS2: Optimize building lists during scan   Tom Rini
• [U-Boot] [U-Boot, v2, 6/8] JFFS2: Change scansize to match linux kernel   Tom Rini
• [U-Boot] [U-Boot, v2, 7/8] JFFS2: Use CLEANMARKER to reduce scanning time   Tom Rini
• [U-Boot] [U-Boot, v2, 8/8] JFFS2: Use merge sort when parsing filesystem   Tom Rini
• [U-Boot] [U-Boot,2/2] arm: bcmcygnus: Enable Ethernet support   Tom Rini
• [U-Boot] image: fix Android ramdisk support when dtb is specified   Tom Rini
• [U-Boot] [U-Boot, v2, 1/4] spl: nand: simple: replace readb() with chip specific read_buf()   Tom Rini
• [U-Boot] [U-Boot, v2, 3/4] lpc32xx: devkit3250: update of board configuration   Tom Rini
• [U-Boot] [U-Boot, v2, 4/4] lpc32xx: devkit3250: add spl build support   Tom Rini
• [U-Boot] [U-Boot, v4, 2/4] nand: lpc32xx: add SLC NAND controller support   Tom Rini
• [U-Boot] [U-Boot,01/12] power: twl4030: Power off support   Tom Rini
• [U-Boot] [U-Boot, 02/12] input: TWL4030 input support for power button, USB and charger   Tom Rini
• [U-Boot] [U-Boot,03/12] input: twl4030: Keypad scan and input   Tom Rini
• [U-Boot] [U-Boot,04/12] omap3: Reboot mode support   Tom Rini
• [U-Boot] [U-Boot, 05/12] LG Optimus Black (P970) codename sniper support   Tom Rini
• [U-Boot] [U-Boot,06/12] sniper: OMAP3 reboot mode support   Tom Rini
• [U-Boot] [U-Boot, 07/12] sniper: Serial number support, obtained from die ID   Tom Rini
• [U-Boot] [U-Boot, 08/12] sniper: Pass serial number through ATAG   Tom Rini
• [U-Boot] [U-Boot,09/12] sniper: Fastboot support   Tom Rini
• [U-Boot] [U-Boot,10/12] sniper: Power button reset support   Tom Rini
• [U-Boot] [U-Boot, 11/12] sniper: Power off when the power on reason is not a valid one   Tom Rini
• [U-Boot] [U-Boot, 12/12] sniper: Keypad support, with recovery and fastboot key combinations   Tom Rini
• [U-Boot] [U-Boot,v4,1/7] arm1136: Remove dead code   Tom Rini
• [U-Boot] [U-Boot, v4, 2/7] arm1136/arm1176: Merge cache handling code   Tom Rini
• [U-Boot] [U-Boot, v4, 3/7] ARM: bcm283x: Define CONFIG_SYS_CACHELINE_SIZE   Tom Rini
• [U-Boot] [U-Boot, v4, 4/7] ARM: bcm283x: Allocate all mailbox buffers cacheline aligned   Tom Rini
• [U-Boot] [U-Boot, v4, 5/7] arm/mach-bcm283x/mbox: Flush and invalidate dcache when using fw mailbox   Tom Rini
• [U-Boot] [U-Boot,v4,6/7] dwc2: Add dcache support   Tom Rini
• [U-Boot] [U-Boot,v4,7/7] arm/rpi: Enable dcache   Tom Rini
• [U-Boot] include/bitfield.h: Assure new bitfield value doesn't touch unwanted bits   Tom Rini
• [U-Boot] drivers: hierarchize drivers Kconfig menu   Tom Rini
• [U-Boot] [U-Boot,V2,1/3] omap3: fix NAND support for mcx board   Tom Rini
• [U-Boot] [U-Boot,V2,2/3] mcx: add Ethernet over USB   Tom Rini
• [U-Boot] [U-Boot, V2, 3/3] ti: drop value from CONFIG_SYS_NAND_BUSWIDTH_16BIT   Tom Rini
• [U-Boot] [U-Boot, v2] Correct License and Copyright information on few files   Tom Rini
• [U-Boot] [U-Boot, v3, 1/4] m68k: cache: add an empty stub functions for invalidate/flush dcache   Tom Rini
• [U-Boot] [U-Boot, v3, 2/4] ARM: cache: add an empty stub function for invalidate/flush dcache   Tom Rini
• [U-Boot] [U-Boot, v3, 3/4] ARM: cache: implement a default weak flush_cache() function   Tom Rini
• [U-Boot] [U-Boot,v3,4/4] usb: ohci: enable cache support   Tom Rini
• [U-Boot] [U-Boot,v2] integrator: switch to DM serial port   Tom Rini
• [U-Boot] [U-Boot,1/7] arm: lpc32xx: mux: add missing registers   Tom Rini
  • [U-Boot] [U-Boot,1/7] arm: lpc32xx: mux: add missing registers   LEMIEUX, SYLVAIN
    • [U-Boot] [U-Boot,1/7] arm: lpc32xx: mux: add missing registers   Tom Rini
• [U-Boot] [U-Boot,2/7] lpc32xx: cpu: add support for soft reset   Tom Rini
• [U-Boot] [U-Boot,3/7] arm: lpc32xx: gpio macro for pin mapping   Tom Rini
• [U-Boot] [U-Boot, 4/7] i2c: lpc32xx: use api to get hclk instead of fix value   Tom Rini
• [U-Boot] [U-Boot,5/7] i2c: lpc32xx: fix read timeout   Tom Rini
• [U-Boot] [U-Boot,6/7] i2c: lpc32xx: fix write timeout   Tom Rini
• [U-Boot] [U-Boot,7/7] net: lpc32xx: eth buffers base config   Tom Rini
• [U-Boot] [U-Boot, V2, 1/3] ARM: Introduce erratum workaround for 801819   Tom Rini
• [U-Boot] [U-Boot, V2, 2/3] ARM: DRA7/ OMAP5: implement Auxiliary Control Register configuration   Tom Rini
• [U-Boot] [U-Boot, V2, 3/3] ARM: DRA72: disable workaround for 801819   Tom Rini
• [U-Boot] [U-Boot,v2,1/8] ARM: keystone2: Cleanup SoC detection   Tom Rini
• [U-Boot] [U-Boot, v2, 2/8] ARM: keystone2: Enable CONFIG_DISPLAY_CPUINFO   Tom Rini
• [U-Boot] [U-Boot,v2,3/8] ARM: keystone2: Cleanup PLL init code   Tom Rini
• [U-Boot] [U-Boot, v2, 4/8] ARM: keystone2: Fix dev and arm speed detection   Tom Rini
• [U-Boot] [U-Boot, v2, 5/8] ARM: keystone2: Use common structure for PLLs   Tom Rini
• [U-Boot] [U-Boot, v2, 6/8] ARM: keystone2: Cleanup init_pll definition   Tom Rini
• [U-Boot] [U-Boot, v2, 7/8] ARM: keystone2: Remove unsed external clocks   Tom Rini
• [U-Boot] [U-Boot, v2, 8/8] ARM: keystone2: Use common definition for clk_get_rate   Tom Rini
• [U-Boot] [U-Boot, 2/2] common/cmd_source.c: Fix the source command failure under 64-bit platform   Tom Rini
• [U-Boot] [U-Boot,1/2] spl: Fix compile warning for arm64   Tom Rini
• [U-Boot] [U-Boot, v4, 2/9] dm: gpio: hi6220: Add a hi6220 GPIO driver model driver.   Tom Rini
• [U-Boot] [U-Boot, v4, 3/9] ARM: hi6220: Add register and bitfield definition header files.   Tom Rini
• [U-Boot] [U-Boot, v4, 4/9] hisilicon: hi6220: Add a hi6220 pinmux driver.   Tom Rini
• [U-Boot] [U-Boot, v4, 5/9] pmic: pmic_hi6553: Add a driver for the hi6553 pmic found on hikey board.   Tom Rini
• [U-Boot] [U-Boot, v4, 6/9] mmc: hi6220_dw_mmc: Add hi6220 glue code for dw_mmc controller.   Tom Rini
• [U-Boot] [U-Boot, v4, 7/9] ARM64: hikey: hi6220: Add u-boot support for the 96boards CE HiKey board.   Tom Rini
• [U-Boot] [U-Boot, v4, 8/9] ARM64: hikey: Add a README for this board.   Tom Rini
• [U-Boot] [U-Boot, 1/6] spi: omap3_spi: add am43xx support to omap3_spi   Tom Rini
• [U-Boot] [U-Boot,2/6] arm: am43xx: enable spi clock   Tom Rini
• [U-Boot] [U-Boot, 3/6] mmc: omap_hsmmc: enable proper CMD(DAT) lines reset procedure for am43xx   Tom Rini
• [U-Boot] [U-Boot, 4/6] mmc: omap_hsmmc: enable 8bit interface for eMMC for AM43xx   Tom Rini
• [U-Boot] [U-Boot,5/6] gpio: am43xx: expand gpio support   Tom Rini
• [U-Boot] [U-Boot,6/6] arm: am437x: Introduce new board cm-t43   Tom Rini
• [U-Boot] [PATCH v4 0/9] Add support for hi6220 SoC and HiKey 96boards CE board.   Tom Rini
• [U-Boot] [PATCH 0/4] arm: at91: change mpddr and support picosam9g45   Erik van Luijk
  • [U-Boot] [PATCH 1/4] arm: at91: mpddr: allow multiple DDR controllers   Erik van Luijk
    • [U-Boot] [U-Boot, 1/4] arm: at91: mpddr: allow multiple DDR controllers   Andreas Bießmann
  • [U-Boot] [PATCH 2/4] arm: at91: at91sam9m10g45ek/corvus remove useless chip select 1 init   Erik van Luijk
    • [U-Boot] [PATCH 2/4] arm: at91: at91sam9m10g45ek/corvus remove useless chip select 1 init   Andreas Bießmann
      • [U-Boot] [PATCH 2/4] arm: at91: at91sam9m10g45ek/corvus remove useless chip select 1 init   Erik van Luijk
    • [U-Boot] [U-Boot, 2/4] arm: at91: at91sam9m10g45ek/corvus remove useless chip select 1 init   Andreas Bießmann
  • [U-Boot] [PATCH 3/4] arm: at91: pmc: replace the constant with a define in at91_pmc.h   Erik van Luijk
    • [U-Boot] [PATCH 3/4] arm: at91: pmc: replace the constant with a define in at91_pmc.h   Andreas Bießmann
    • [U-Boot] [U-Boot, 3/4] arm: at91: pmc: replace the constant with a define in at91_pmc.h   Andreas Bießmann
  • [U-Boot] [PATCH 4/4] arm: at91: add support for mini-box picosam9g45 board   Erik van Luijk
    • [U-Boot] [PATCH v2 4/4] arm: at91: add support for mini-box picosam9g45 board   Erik van Luijk
      • [U-Boot] [U-Boot, v2, 4/4] arm: at91: add support for mini-box picosam9g45 board   Andreas Bießmann
• [U-Boot] [PATCH 0/3] ARM: DRA74x: Add support for ES2.0   Nishanth Menon
  • [U-Boot] [PATCH 1/3] ARM: DRA7: Add detection of ES2.0   Nishanth Menon
    • [U-Boot] [PATCH 1/3] ARM: DRA7: Add detection of ES2.0   Tom Rini
    • [U-Boot] [U-Boot,1/3] ARM: DRA7: Add detection of ES2.0   Tom Rini
  • [U-Boot] [PATCH 2/3] ARM: DRA74-evm: Add iodelay values for SR2.0   Nishanth Menon
    • [U-Boot] [PATCH 2/3] ARM: DRA74-evm: Add iodelay values for SR2.0   Tom Rini
    • [U-Boot] [U-Boot, 2/3] ARM: DRA74-evm: Add iodelay values for SR2.0   Tom Rini
  • [U-Boot] [PATCH 3/3] ARM: DRA74-evm: Use SMA_1 spare register to workaround DP83865 phy on SR2.0   Nishanth Menon
    • [U-Boot] [PATCH 3/3] ARM: DRA74-evm: Use SMA_1 spare register to workaround DP83865 phy on SR2.0   Tom Rini
    • [U-Boot] [U-Boot, 3/3] ARM: DRA74-evm: Use SMA_1 spare register to workaround DP83865 phy on SR2.0   Tom Rini
• [U-Boot] [PATCH] ARM: OMAP5+: configs: Fix default boot command   Lokesh Vutla
  • [U-Boot] [PATCH] ARM: OMAP5+: configs: Fix default boot command   Nishanth Menon
    • [U-Boot] [PATCH] ARM: OMAP5+: configs: Fix default boot command   Tom Rini
      • [U-Boot] [PATCH] ARM: OMAP5+: configs: Fix default boot command   Nishanth Menon
      • [U-Boot] [PATCH] ARM: OMAP5+: configs: Fix default boot command   Tom Rini
      • [U-Boot] [PATCH] ARM: OMAP5+: configs: Fix default boot command   Nishanth Menon
  • [U-Boot] [PATCH] ARM: OMAP5+: configs: Fix default boot command   Tom Rini
  • [U-Boot] ARM: OMAP5+: configs: Fix default boot command   Tom Rini
• [U-Boot] [patch] break build if it would produce broken binary   Pavel Machek
  • [U-Boot] [patch] break build if it would produce broken binary   Marek Vasut
• [U-Boot] [PATCH v3 0/7] This patch series adds support for Cavium ThunderX 88xx SoC family   Sergey Temerkhanov
  • [U-Boot] [PATCH v3 1/7] armv8: New MMU setup code allowing to use 48+ bits PA/VA   Sergey Temerkhanov
    • [U-Boot] [PATCH v3 1/7] armv8: New MMU setup code allowing to use 48+ bits PA/VA   York Sun
  • [U-Boot] [PATCH v3 0/7] This patch series adds support for Cavium ThunderX 88xx SoC family   Sergei Temerkhanov
• [U-Boot] [PATCH v3 2/7] armv8: Add SMC calls infrastructure   Sergey Temerkhanov
  • [U-Boot] [PATCH v3 2/7] armv8: Add SMC calls infrastructure   Simon Glass
    • [U-Boot] [PATCH v3 2/7] armv8: Add SMC calls infrastructure   Sergei Temerkhanov
      • [U-Boot] [PATCH v3 2/7] armv8: Add SMC calls infrastructure   Simon Glass
• [U-Boot] [PATCH v3 3/7] armv8: Add psci.h from the Linux kernel   Sergey Temerkhanov
• [U-Boot] [PATCH v3 4/7] arm: serial: Add ability to use pre-initialized UARTs   Sergey Temerkhanov
  • [U-Boot] [PATCH v3 4/7] arm: serial: Add ability to use pre-initialized UARTs   Simon Glass
• [U-Boot] [PATCH v3 5/7] armv8: cavium: Add ThunderX 88xx board definition   Sergey Temerkhanov
• [U-Boot] [PATCH v3 6/7] armv8: cavium: Add an implementation of ATF calling functions   Sergey Temerkhanov
• [U-Boot] [PATCH v3 7/7] armv8: cavium: Get DRAM size from ATF   Sergey Temerkhanov
• [U-Boot] [PATCH v3 0/6] net: Move e1000 driver to driver model and Kconfig   Simon Glass
  • [U-Boot] [PATCH v3 1/6] net: e1000: Move #include of common.h to the C files   Simon Glass
  • [U-Boot] [PATCH v3 2/6] net: e1000: Prepare for driver model conversion   Simon Glass
  • [U-Boot] [PATCH v3 3/6] net: e1000: Convert to driver model   Simon Glass
  • [U-Boot] [PATCH v3 4/6] net: e1000: Add Kconfig options   Simon Glass
  • [U-Boot] [PATCH v3 5/6] Tidy up some defconfig files   Simon Glass
  • [U-Boot] [PATCH v3 6/6] net: Move CONFIG_E1000 options to Kconfig   Simon Glass
• [U-Boot] [PATCH v4 1/2] x86: minnowmax: Define and enable interrupt setup   Simon Glass
  • [U-Boot] [PATCH v4 2/2] x86: Add a simple interrupt script to the README   Simon Glass
    • [U-Boot] [PATCH v4 2/2] x86: Add a simple interrupt script to the README   Bin Meng
      • [U-Boot] [PATCH v4 2/2] x86: Add a simple interrupt script to the README   Simon Glass
  • [U-Boot] [PATCH v4 1/2] x86: minnowmax: Define and enable interrupt setup   Bin Meng
    • [U-Boot] [PATCH v4 1/2] x86: minnowmax: Define and enable interrupt setup   Simon Glass
• [U-Boot] [RESUBMIT PATCH v3 0/8] This patch series adds support for Cavium ThunderX 88xx SoC family   Sergey Temerkhanov
  • [U-Boot] [RESUBMIT PATCH v3 2/8] armv8: New MMU setup code allowing to use 48+ bits PA/VA   Sergey Temerkhanov
    • [U-Boot] [RESUBMIT PATCH v3 2/8] armv8: New MMU setup code allowing to use 48+ bits PA/VA   Marek Vasut
      • [U-Boot] [RESUBMIT PATCH v3 2/8] armv8: New MMU setup code allowing to use 48+ bits PA/VA   Sergei Temerkhanov
• [U-Boot] [RESUBMIT PATCH v3 1/8] armv8: Add read_mpidr() function   Sergey Temerkhanov
  • [U-Boot] [RESUBMIT PATCH v3 1/8] armv8: Add read_mpidr() function   Simon Glass
• [U-Boot] [RESUBMIT PATCH v3 3/8] armv8: Add SMC calls infrastructure   Sergey Temerkhanov
• [U-Boot] [RESUBMIT PATCH v3 4/8] armv8: Add psci.h from the Linux kernel   Sergey Temerkhanov
• [U-Boot] [RESUBMIT PATCH v3 5/8] arm: serial: Add ability to use pre-initialized UARTs   Sergey Temerkhanov
• [U-Boot] [RESUBMIT PATCH v3 6/8] armv8: cavium: Add ThunderX 88xx board definition   Sergey Temerkhanov
• [U-Boot] [RESUBMIT PATCH v3 7/8] armv8: cavium: Add an implementation of ATF calling functions   Sergey Temerkhanov
• [U-Boot] [RESUBMIT PATCH v3 8/8] armv8: cavium: Get DRAM size from ATF   Sergey Temerkhanov
• [U-Boot] [PATCH v2 0/2] Rename DDR4 target names   York Sun
  • [U-Boot] [PATCH v2 1/2] armv8/ls2085a_emu: Drop DDR3 emulation target   York Sun
  • [U-Boot] [PATCH v2 2/2] powerpc/defconfig: Rename defconfig file for T1040QDS/T1024QDS DDR4 targets   York Sun
• [U-Boot] [U-Boot PATCH v2 01/10] sf: allocate cache aligned buffers to copy from flash   Jagan Teki
  • [U-Boot] [U-Boot PATCH v2 01/10] sf: allocate cache aligned buffers to copy from flash   Simon Glass
    • [U-Boot] [U-Boot PATCH v2 01/10] sf: allocate cache aligned buffers to copy from flash   Jagan Teki
  • [U-Boot] [U-Boot PATCH v2 01/10] sf: allocate cache aligned buffers to copy from flash   Tom Rini
    • [U-Boot] [U-Boot PATCH v2 01/10] sf: allocate cache aligned buffers to copy from flash   Jagan Teki
      • [U-Boot] [U-Boot PATCH v2 01/10] sf: allocate cache aligned buffers to copy from flash   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 01/10] sf: allocate cache aligned buffers to copy from flash   Simon Glass
      • [U-Boot] [U-Boot PATCH v2 01/10] sf: allocate cache aligned buffers to copy from flash   Jagan Teki
      • [U-Boot] [U-Boot PATCH v2 01/10] sf: allocate cache aligned buffers to copy from flash   Tom Rini
      • [U-Boot] [U-Boot PATCH v2 01/10] sf: allocate cache aligned buffers to copy from flash   Simon Glass
• [U-Boot] [RESEND PATCH 1/1] armv8: Add framework for CCN-504 interconnect configuration   York Sun
  • [U-Boot] [RESEND PATCH 1/1] armv8: Add framework for CCN-504 interconnect configuration   Sharma Bhupesh
• [U-Boot] [U-Boot PATCH v2 08/10] dma: ti-edma3: Add helper function to support edma3 transfer   Jagan Teki
• [U-Boot] [PATCH v2] kconfiglib: update to the latest version   Ulf Magnusson
  • [U-Boot] [PATCH v2] kconfiglib: update to the latest version   Ulf Magnusson
    • [U-Boot] [PATCH v2] kconfiglib: update to the latest version   Ulf Magnusson
    • [U-Boot] [U-Boot,v2] kconfiglib: update to the latest version   Tom Rini
• [U-Boot] [U-Boot PATCH v2 09/10] spi: ti_qspi: Use DMA to read from qspi flash   Jagan Teki
• [U-Boot] [PATCH] ti: qspi: set flash quad bit based on quad support flag   vishalm at ti.com
  • [U-Boot] [PATCH] ti: qspi: set flash quad bit based on quad support flag   Jagan Teki
• [U-Boot] [U-Boot PATCH v2 07/10] sf: ops: Add spi_flash_copy_mmap function   Jagan Teki
• [U-Boot] [U-Boot PATCH v2 10/10] ARM: dra7xx_evm: Enable EDMA3 in SPL to support DMA on qspi   Jagan Teki
• [U-Boot] [U-Boot PATCH v2 05/10] ARM: OMAP5: Add functions to enable and disable EDMA3 clocks   Tom Rini
• [U-Boot] [U-Boot PATCH v2 06/10] ARM: AM43XX: Add functions to enable and disable EDMA3 clocks   Tom Rini
  • [U-Boot] [U-Boot PATCH v2 06/10] ARM: AM43XX: Add functions to enable and disable EDMA3 clocks   Jagan Teki
• [U-Boot] [U-Boot PATCH v2 02/10] env: use cache line aligned memory for flash read   Tom Rini
• [U-Boot] [PATCH 06/19] spi: Fix zynq SPI binding   Jagan Teki
• [U-Boot] [PATCH] spi: zynq_spi: Simplify debug macro   Jagan Teki
• [U-Boot] tftpserver in uboot   Ravi Koganti
  • [U-Boot] tftpserver in uboot   Heiko Schocher
• [U-Boot] [U-Boot PATCH v2 04/10] ARM: OMAP5: Add support for disabling clocks in uboot   Jagan Teki
• [U-Boot] [PATCH] usb_storage: USB storage transfer size increase for xHCI   Sergey Temerkhanov
  • [U-Boot] [PATCH] usb_storage: USB storage transfer size increase for xHCI   Marek Vasut
    • [U-Boot] [PATCH] usb_storage: USB storage transfer size increase for xHCI   Sergei Temerkhanov
      • [U-Boot] [PATCH] usb_storage: USB storage transfer size increase for xHCI   Marek Vasut
      • [U-Boot] [PATCH] usb_storage: USB storage transfer size increase for xHCI   Marek Vasut
      • [U-Boot] [PATCH] usb_storage: USB storage transfer size increase for xHCI   Sergei Temerkhanov
      • [U-Boot] [PATCH] usb_storage: USB storage transfer size increase for xHCI   Marek Vasut
      • [U-Boot] [PATCH] usb_storage: USB storage transfer size increase for xHCI   Sergei Temerkhanov
      • [U-Boot] [PATCH] usb_storage: USB storage transfer size increase for xHCI   Marek Vasut
• [U-Boot] [U-Boot PATCH v2 03/10] ARM: AM43xx: Add support for disabling clocks in uboot   Jagan Teki
• [U-Boot] [PATCH 3/3] ARM: at91: sama5: update the spi flash mapping   Jagan Teki
• [U-Boot] [PATCH v2 08/15] cgtqmx6eval: Add SPI NOR flash support   Jagan Teki
  • [U-Boot] [PATCH v2 08/15] cgtqmx6eval: Add SPI NOR flash support   Otavio Salvador
• [U-Boot] [PATCH 1/3] tbs2910: use full name in Kconfig board selection   Soeren Moch
  • [U-Boot] [PATCH 2/3] tbs2910: remove deprecated CONFIG_SYS_EXTRA_OPTIONS   Soeren Moch
  • [U-Boot] [PATCH 3/3] tbs2910: remove SYS_SOC from board specific Kconfig   Soeren Moch
  • [U-Boot] [PATCH 1/3] tbs2910: use full name in Kconfig board selection   Soeren Moch
    • [U-Boot] [PATCH 1/3] tbs2910: use full name in Kconfig board selection   Stefano Babic
• [U-Boot] [PATCH v7 2/5] nand: lpc32xx: add hardware ECC support   slemieux.tyco at gmail.com
  • [U-Boot] [PATCH v7 2/5] nand: lpc32xx: add hardware ECC support   Vladimir Zapolskiy
    • [U-Boot] [PATCH v7 2/5] nand: lpc32xx: add hardware ECC support   LEMIEUX, SYLVAIN
    • [U-Boot] [PATCH v7 2/5] nand: lpc32xx: add hardware ECC support   LEMIEUX, SYLVAIN
  • [U-Boot] [U-Boot, v7, 2/5] nand: lpc32xx: add hardware ECC support   Tom Rini
• [U-Boot] [PATCH v7 3/5] nand: lpc32xx: add ECC layout for small page NAND   slemieux.tyco at gmail.com
  • [U-Boot] [U-Boot, v7, 3/5] nand: lpc32xx: add ECC layout for small page NAND   Tom Rini
• [U-Boot] [PATCH v7 5/5] usb: lpc32xx: add host USB driver   slemieux.tyco at gmail.com
  • [U-Boot] [U-Boot,v7,5/5] usb: lpc32xx: add host USB driver   Tom Rini
• [U-Boot] [PATCH 0/2] arm: Move all boards over to generic board   Simon Glass
  • [U-Boot] [PATCH 1/2] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Simon Glass
    • [U-Boot] [PATCH 1/2] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Masahiro Yamada
      • [U-Boot] [PATCH 1/2] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Simon Glass
    • [U-Boot] [PATCH 1/2] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Anatolij Gustschin
    • [U-Boot] [PATCH 1/2] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Stefan Roese
    • [U-Boot] [PATCH 1/2] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Ajay
  • [U-Boot] [PATCH 0/2] arm: Move all boards over to generic board   Pavel Machek
    • [U-Boot] [PATCH 0/2] arm: Move all boards over to generic board   Simon Glass
• [U-Boot] [PATCH 2/2] arm: Drop old non-generic-board code   Simon Glass
• [U-Boot] [PATCH 1/9] powerpc: canmb: convert to generic board   Anatolij Gustschin
  • [U-Boot] [PATCH 2/9] powerpc: inka4x0: convert to generic board   Anatolij Gustschin
    • [U-Boot] [PATCH 2/9] powerpc: inka4x0: convert to generic board   Tom Rini
    • [U-Boot] [PATCH v2 2/9] powerpc: inka4x0: convert to generic board   Anatolij Gustschin
      • [U-Boot] [U-Boot, v2, 2/9] powerpc: inka4x0: convert to generic board   Tom Rini
  • [U-Boot] [PATCH 3/9] powerpc: ipek01: convert to generic board   Anatolij Gustschin
    • [U-Boot] [PATCH v2 3/9] powerpc: ipek01: convert to generic board   Anatolij Gustschin
      • [U-Boot] [U-Boot, v2, 3/9] powerpc: ipek01: convert to generic board   Tom Rini
  • [U-Boot] [PATCH 4/9] powerpc: jupiter: convert to generic board   Anatolij Gustschin
    • [U-Boot] [U-Boot, 4/9] powerpc: jupiter: convert to generic board   Tom Rini
  • [U-Boot] [PATCH 5/9] powerpc: motionpro: convert to generic board   Anatolij Gustschin
    • [U-Boot] [U-Boot, 5/9] powerpc: motionpro: convert to generic board   Tom Rini
  • [U-Boot] [PATCH 6/9] powerpc: munices: convert to generic board   Anatolij Gustschin
    • [U-Boot] [U-Boot, 6/9] powerpc: munices: convert to generic board   Tom Rini
  • [U-Boot] [PATCH 7/9] powerpc: pcm030: convert to generic board   Anatolij Gustschin
    • [U-Boot] [U-Boot, 7/9] powerpc: pcm030: convert to generic board   Tom Rini
  • [U-Boot] [PATCH 8/9] powerpc: v38b: convert to generic board   Anatolij Gustschin
    • [U-Boot] [U-Boot,8/9] powerpc: v38b: convert to generic board   Tom Rini
  • [U-Boot] [PATCH 9/9] powerpc: socrates: convert to generic board   Anatolij Gustschin
    • [U-Boot] [U-Boot, 9/9] powerpc: socrates: convert to generic board   Tom Rini
  • [U-Boot] [U-Boot,1/9] powerpc: canmb: convert to generic board   Tom Rini
• [U-Boot] [PATCH v3 0/9] dfu: tftp: update: Support for DFU upgrades via ETH (TFTP)   Lukasz Majewski
  • [U-Boot] [PATCH v3 2/9] net: tftp: Move tftp.h file from ./net to ./include/net   Lukasz Majewski
    • [U-Boot] [PATCH v3 2/9] net: tftp: Move tftp.h file from ./net to ./include/net   Joe Hershberger
  • [U-Boot] [PATCH v3 5/9] dfu: tftp: update: Add dfu_write_from_mem_addr() function   Lukasz Majewski
    • [U-Boot] [PATCH v3 5/9] dfu: tftp: update: Add dfu_write_from_mem_addr() function   Joe Hershberger
  • [U-Boot] [PATCH v3 6/9] update: tftp: dfu: Extend update_tftp() function to support DFU   Lukasz Majewski
  • [U-Boot] [PATCH v3 7/9] dfu: command: Extend "dfu" command to handle receiving data via TFTP   Lukasz Majewski
    • [U-Boot] [PATCH v3 7/9] dfu: command: Extend "dfu" command to handle receiving data via TFTP   Joe Hershberger
  • [U-Boot] [PATCH v3 8/9] dfu: tftp: Kconfig: Add Kconfig entry for dfu tftp feature   Lukasz Majewski
    • [U-Boot] [PATCH v3 8/9] dfu: tftp: Kconfig: Add Kconfig entry for dfu tftp feature   Joe Hershberger
      • [U-Boot] [PATCH v3 8/9] dfu: tftp: Kconfig: Add Kconfig entry for dfu tftp feature   Lukasz Majewski
  • [U-Boot] [PATCH v3 9/9] dfu: tftp: Kconfig: Enable DFU_TFTP support on the am335x_boneblack_defconfig   Lukasz Majewski
    • [U-Boot] [PATCH v3 9/9] dfu: tftp: Kconfig: Enable DFU_TFTP support on the am335x_boneblack_defconfig   Joe Hershberger
      • [U-Boot] [PATCH v3 9/9] dfu: tftp: Kconfig: Enable DFU_TFTP support on the am335x_boneblack_defconfig   Lukasz Majewski
      • [U-Boot] [PATCH v3 9/9] dfu: tftp: Kconfig: Enable DFU_TFTP support on the am335x_boneblack_defconfig   Joe Hershberger
      • [U-Boot] [PATCH v3 9/9] dfu: tftp: Kconfig: Enable DFU_TFTP support on the am335x_boneblack_defconfig   Lukasz Majewski
      • [U-Boot] [PATCH v3 9/9] dfu: tftp: Kconfig: Enable DFU_TFTP support on the am335x_boneblack_defconfig   Joe Hershberger
      • [U-Boot] [PATCH v3 9/9] dfu: tftp: Kconfig: Enable DFU_TFTP support on the am335x_boneblack_defconfig   Lukasz Majewski
• [U-Boot] [PATCH v3 1/9] doc: dfu: tftp: README entry for TFTP extension of DFU   Lukasz Majewski
  • [U-Boot] [PATCH v3 1/9] doc: dfu: tftp: README entry for TFTP extension of DFU   Joe Hershberger
• [U-Boot] [PATCH v3 3/9] tftp: update: Allow some parts of the code to be reused when CONFIG_SYS_NO_FLASH is set   Lukasz Majewski
• [U-Boot] [PATCH v3 4/9] dfu: tftp: update: Provide tftp support for the DFU subsystem   Lukasz Majewski
• [U-Boot] Regression in usb-storage in u-boot 2015.04 ???   Marek Vasut
• [U-Boot] [PATCH v2] dfu:tests: Modify dfu_gadget_test.sh to accept USB device vendor:product ID   Lukasz Majewski
• [U-Boot] [PATCH] ARM: tegra: Add p2371-2180 board   Stephen Warren
  • [U-Boot] [PATCH] ARM: tegra: Add p2371-2180 board   Simon Glass
• [U-Boot] [PATCH 1/3] armv7/fsl-ls102xa: Workaround for DDR erratum A008514   Yuan Yao
  • [U-Boot] [PATCH 2/3] LS102XA:workaround:disable priorities within DDR   Yuan Yao
    • [U-Boot] [PATCH 2/3] LS102XA:workaround:disable priorities within DDR   Sinan Akman
    • [U-Boot] [PATCH 2/3] LS102XA:workaround:disable priorities within DDR   York Sun
  • [U-Boot] [PATCH 3/3] ls102xa: Enable snoop and DVM message requests.   Yuan Yao
    • [U-Boot] [PATCH 3/3] ls102xa: Enable snoop and DVM message requests.   York Sun
  • [U-Boot] [PATCH 1/3] armv7/fsl-ls102xa: Workaround for DDR erratum A008514   Sinan Akman
    • [U-Boot] [PATCH 1/3] armv7/fsl-ls102xa: Workaround for DDR erratum A008514   Yao Yuan
  • [U-Boot] [PATCH 1/3] armv7/fsl-ls102xa: Workaround for DDR erratum A008514   York Sun
• [U-Boot] [PATCH v5 2/5] arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD   Stefan Roese
• [U-Boot] u-boot license: SPDX GPL-2.0+ deprecated?   Sharma Bhupesh
  • [U-Boot] u-boot license: SPDX GPL-2.0+ deprecated?   Michael Heimpold
• [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Bin Meng
  • [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Simon Glass
    • [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Stephen Warren
      • [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Simon Glass
      • [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Bin Meng
      • [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Stephen Warren
      • [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Simon Glass
      • [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Bin Meng
      • [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Stephen Warren
      • [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Stephen Warren
      • [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Bin Meng
      • [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Simon Glass
      • [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Bin Meng
      • [U-Boot] [RFC] Merge all ns16550 dm serial drivers into one   Stephen Warren
• [U-Boot] [PATCH v2 1/1] arm/ls102xa:add hwconfig setting to support disable unused devices.   Zhuoyu Zhang
  • [U-Boot] [PATCH v2 1/1] arm/ls102xa:add hwconfig setting to support disable unused devices.   York Sun
    • [U-Boot] [PATCH v2 1/1] arm/ls102xa:add hwconfig setting to support disable unused devices.   Zhang Z.Y.
  • [U-Boot] [PATCH v2 1/1] arm/ls102xa:add hwconfig setting to support disable unused devices.   Zhuoyu Zhang
• [U-Boot] [PATCH] efi: Update README.efi to clarify build and test instructions   Bin Meng
  • [U-Boot] [PATCH] efi: Update README.efi to clarify build and test instructions   Stoppa, Igor
    • [U-Boot] [PATCH] efi: Update README.efi to clarify build and test instructions   Bin Meng
      • [U-Boot] [PATCH] efi: Update README.efi to clarify build and test instructions   Stoppa, Igor
      • [U-Boot] [PATCH] efi: Update README.efi to clarify build and test instructions   Bin Meng
      • [U-Boot] [PATCH] efi: Update README.efi to clarify build and test instructions   Stoppa, Igor
      • [U-Boot] [PATCH] efi: Update README.efi to clarify build and test instructions   Bin Meng
• [U-Boot] [PATCH] usb: xhci: Fix a potential NULL pointer dereference   Sergey Temerkhanov
  • [U-Boot] [PATCH] usb: xhci: Fix a potential NULL pointer dereference   Marek Vasut
    • [U-Boot] [PATCH] usb: xhci: Fix a potential NULL pointer dereference   Sergei Temerkhanov
      • [U-Boot] [PATCH] usb: xhci: Fix a potential NULL pointer dereference   Marek Vasut
      • [U-Boot] [PATCH] usb: xhci: Fix a potential NULL pointer dereference   Sergei Temerkhanov
      • [U-Boot] [PATCH] usb: xhci: Fix a potential NULL pointer dereference   Marek Vasut
      • [U-Boot] [PATCH] usb: xhci: Fix a potential NULL pointer dereference   Sergei Temerkhanov
• [U-Boot] [PATCH 1/2] sunxi: axp221: Allow specifying dcdc2 voltage via Kconfig   Hans de Goede
  • [U-Boot] [PATCH 2/2] sunxi: Add support for gt90h-v4 tablets   Hans de Goede
    • [U-Boot] [PATCH 2/2] sunxi: Add support for gt90h-v4 tablets   Hans de Goede
      • [U-Boot] [PATCH 2/2] sunxi: Add support for gt90h-v4 tablets   Ian Campbell
  • [U-Boot] [PATCH 1/2] sunxi: axp221: Allow specifying dcdc2 voltage via Kconfig   Ian Campbell
• [U-Boot] [PATCH v2] usb: xhci: Fix a potential NULL pointer dereference   Sergey Temerkhanov
  • [U-Boot] [PATCH v2] usb: xhci: Fix a potential NULL pointer dereference   Marek Vasut
    • [U-Boot] [PATCH v2] usb: xhci: Fix a potential NULL pointer dereference   Sergei Temerkhanov
      • [U-Boot] [PATCH v2] usb: xhci: Fix a potential NULL pointer dereference   Marek Vasut
      • [U-Boot] [PATCH v2] usb: xhci: Fix a potential NULL pointer dereference   Sergei Temerkhanov
      • [U-Boot] [PATCH v2] usb: xhci: Fix a potential NULL pointer dereference   Marek Vasut
• [U-Boot] Pull-request: u-boot-pmic.   Przemyslaw Marczak
  • [U-Boot] Pull-request: u-boot-pmic.   Tom Rini
• [U-Boot] Please pull u-boot-x86.git   Simon Glass
  • [U-Boot] Please pull u-boot-x86.git   Tom Rini
  • [U-Boot] Please pull u-boot-x86.git   Simon Glass
    • [U-Boot] Please pull u-boot-x86.git   Tom Rini
• [U-Boot] [PATCH] malloc_simple: Correct the alignment logic in memalign_simple()   Simon Glass
  • [U-Boot] [PATCH] malloc_simple: Correct the alignment logic in memalign_simple()   Tom Rini
  • [U-Boot] malloc_simple: Correct the alignment logic in memalign_simple()   Tom Rini
• [U-Boot] [PATCH v2] efi: Update README.efi to clarify build and test instructions   Bin Meng
  • [U-Boot] [PATCH v2] efi: Update README.efi to clarify build and test instructions   Stoppa, Igor
    • [U-Boot] [PATCH v2] efi: Update README.efi to clarify build and test instructions   Bin Meng
      • [U-Boot] [PATCH v2] efi: Update README.efi to clarify build and test instructions   Stoppa, Igor
      • [U-Boot] [PATCH v2] efi: Update README.efi to clarify build and test instructions   Stoppa, Igor
  • [U-Boot] [PATCH v2] efi: Update README.efi to clarify build and test instructions   Simon Glass
• [U-Boot] git fetch fails, and patchwork not updating   Bin Meng
  • [U-Boot] git fetch fails, and patchwork not updating   Bin Meng
• [U-Boot] [v3 0/4] spi: cadence_qspi: optimize & fix indirect rd-writes   Vikas Manocha
  • [U-Boot] [v3 1/4] spi: cadence_qspi: move trigger base configuration in init   Vikas Manocha
    • [U-Boot] [v3 1/4] spi: cadence_qspi: move trigger base configuration in init   Marek Vasut
      • [U-Boot] [v3 1/4] spi: cadence_qspi: move trigger base configuration in init   vikas
  • [U-Boot] [v3 3/4] spi: cadence_qspi: fix base trigger address & transfer start address   Vikas Manocha
    • [U-Boot] [v3 3/4] spi: cadence_qspi: fix base trigger address & transfer start address   Marek Vasut
      • [U-Boot] [v3 3/4] spi: cadence_qspi: fix base trigger address & transfer start address   vikas
      • [U-Boot] [v3 3/4] spi: cadence_qspi: fix base trigger address & transfer start address   Marek Vasut
      • [U-Boot] [v3 3/4] spi: cadence_qspi: fix base trigger address & transfer start address   vikas
      • [U-Boot] [v3 3/4] spi: cadence_qspi: fix base trigger address & transfer start address   Marek Vasut
  • [U-Boot] [v3 4/4] spi: cadence_qspi: get fifo width from device tree   Vikas Manocha
    • [U-Boot] [v3 4/4] spi: cadence_qspi: get fifo width from device tree   Marek Vasut
• [U-Boot] [v3 2/4] spi: cadence_qspi: fix indirect read/write start address   Vikas Manocha
  • [U-Boot] [v3 2/4] spi: cadence_qspi: fix indirect read/write start address   Marek Vasut
    • [U-Boot] [v3 2/4] spi: cadence_qspi: fix indirect read/write start address   vikas
• [U-Boot] Building Uboot for Nios2 - linker not found on Linux environment   Dave Williams
  • [U-Boot] Building Uboot for Nios2 - linker not found on Linux environment   Thomas Chou
  • [U-Boot] Building Uboot for Nios2 - linker not found on Linux environment   Dave Williams
• [U-Boot] [PATCH 1/8] dm: pci: Support selected device/driver binding before relocation   Bin Meng
  • [U-Boot] [PATCH 2/8] dm: pci: Only allow serial device to be bound before relocation   Bin Meng
    • [U-Boot] [PATCH 2/8] dm: pci: Only allow serial device to be bound before relocation   Simon Glass
      • [U-Boot] [PATCH 2/8] dm: pci: Only allow serial device to be bound before relocation   Bin Meng
      • [U-Boot] [PATCH 2/8] dm: pci: Only allow serial device to be bound before relocation   Simon Glass
      • [U-Boot] [PATCH 2/8] dm: pci: Only allow serial device to be bound before relocation   Bin Meng
  • [U-Boot] [PATCH 3/8] x86: fsp: Delay x86_fsp_init() call a little bit   Bin Meng
    • [U-Boot] [PATCH 3/8] x86: fsp: Delay x86_fsp_init() call a little bit   Simon Glass
  • [U-Boot] [PATCH 4/8] x86: fsp: Enlarge the size of malloc() pool before relocation   Bin Meng
    • [U-Boot] [PATCH 4/8] x86: fsp: Enlarge the size of malloc() pool before relocation   Simon Glass
      • [U-Boot] [PATCH 4/8] x86: fsp: Enlarge the size of malloc() pool before relocation   Bin Meng
    • [U-Boot] [PATCH 4/8] x86: fsp: Enlarge the size of malloc() pool before relocation   Simon Glass
      • [U-Boot] [PATCH 4/8] x86: fsp: Enlarge the size of malloc() pool before relocation   Bin Meng
  • [U-Boot] [PATCH 5/8] drivers: serial: Add ns16550 compatible pci uart driver   Bin Meng
    • [U-Boot] [PATCH 5/8] drivers: serial: Add ns16550 compatible pci uart driver   Bin Meng
    • [U-Boot] [PATCH 5/8] drivers: serial: Add ns16550 compatible pci uart driver   Simon Glass
      • [U-Boot] [PATCH 5/8] drivers: serial: Add ns16550 compatible pci uart driver   Bin Meng
      • [U-Boot] [PATCH 5/8] drivers: serial: Add ns16550 compatible pci uart driver   Simon Glass
      • [U-Boot] [PATCH 5/8] drivers: serial: Add ns16550 compatible pci uart driver   Bin Meng
      • [U-Boot] [PATCH 5/8] drivers: serial: Add ns16550 compatible pci uart driver   Simon Glass
  • [U-Boot] [PATCH 6/8] drivers: serial: Remove special handling for pci uart in the ns16550 driver   Bin Meng
  • [U-Boot] [PATCH 7/8] x86: crownbay: Support Topcliff integrated pci uart devices   Bin Meng
  • [U-Boot] [PATCH 8/8] x86: queensbay: Call fsp_init_phase_pci() again   Bin Meng
    • [U-Boot] [PATCH 8/8] x86: queensbay: Call fsp_init_phase_pci() again   Bin Meng
      • [U-Boot] [PATCH 8/8] x86: queensbay: Call fsp_init_phase_pci() again   Simon Glass
      • [U-Boot] [PATCH 8/8] x86: queensbay: Call fsp_init_phase_pci() again   Bin Meng
  • [U-Boot] [PATCH 1/8] dm: pci: Support selected device/driver binding before relocation   Simon Glass
• [U-Boot] [PATCH v3] dfu:tests: Modify dfu_gadget_test.sh to accept USB device vendor:product ID   Lukasz Majewski
  • [U-Boot] [PATCH v3] dfu:tests: Modify dfu_gadget_test.sh to accept USB device vendor:product ID   Lukasz Majewski
    • [U-Boot] [PATCH v3] dfu:tests: Modify dfu_gadget_test.sh to accept USB device vendor:product ID   Lukasz Majewski
• [U-Boot] [PATCH 0/1] env_mmc: Properly prefix mmc errors with '!'   Hans de Goede
  • [U-Boot] [PATCH] env_mmc: Properly prefix mmc errors with '!'   Hans de Goede
    • [U-Boot] env_mmc: Properly prefix mmc errors with '!'   Tom Rini
• [U-Boot] [PATCH 00/15] sunxi_nand_spl: cleanups, auto config and bad block handling   Hans de Goede
  • [U-Boot] [PATCH 06/15] sunxi_nand_spl: Make sure the DMA controller is enabled   Hans de Goede
    • [U-Boot] [PATCH 06/15] sunxi_nand_spl: Make sure the DMA controller is enabled   Ian Campbell
• [U-Boot] [PATCH 01/15] sunxi_nand_spl: Fix CONFIG_SPL_NAND_SUNXI handling   Hans de Goede
  • [U-Boot] [PATCH 01/15] sunxi_nand_spl: Fix CONFIG_SPL_NAND_SUNXI handling   Ian Campbell
  • [U-Boot] [PATCH 01/15] sunxi_nand_spl: Fix CONFIG_SPL_NAND_SUNXI handling   Maxime Ripard
    • [U-Boot] [PATCH 01/15] sunxi_nand_spl: Fix CONFIG_SPL_NAND_SUNXI handling   Hans de Goede
      • [U-Boot] [PATCH 01/15] sunxi_nand_spl: Fix CONFIG_SPL_NAND_SUNXI handling   Maxime Ripard
• [U-Boot] [PATCH 02/15] sunxi_nand_spl: Drop unnecessary temp buf   Hans de Goede
  • [U-Boot] [PATCH 02/15] sunxi_nand_spl: Drop unnecessary temp buf   Chen-Yu Tsai
    • [U-Boot] [PATCH 02/15] sunxi_nand_spl: Drop unnecessary temp buf   Ian Campbell
• [U-Boot] [PATCH 03/15] sunxi_nand_spl: We only need to reset the nand chip once   Hans de Goede
  • [U-Boot] [PATCH 03/15] sunxi_nand_spl: We only need to reset the nand chip once   Ian Campbell
• [U-Boot] [PATCH 04/15] sunxi_nand_spl: Do not bother writing the spare-area reg in syndrome mode   Hans de Goede
  • [U-Boot] [PATCH 04/15] sunxi_nand_spl: Do not bother writing the spare-area reg in syndrome mode   Ian Campbell
    • [U-Boot] [PATCH 04/15] sunxi_nand_spl: Do not bother writing the spare-area reg in syndrome mode   Hans de Goede
      • [U-Boot] [PATCH 04/15] sunxi_nand_spl: Do not bother writing the spare-area reg in syndrome mode   Ian Campbell
• [U-Boot] [PATCH 05/15] sunxi_nand_spl: Use SYS_NAND_SELF_INIT and only do nand init when necessary   Hans de Goede
  • [U-Boot] [PATCH 05/15] sunxi_nand_spl: Use SYS_NAND_SELF_INIT and only do nand init when necessary   Ian Campbell
• [U-Boot] [PATCH 07/15] sunxi_nand_spl: Turn off clocks when we're done with the nand   Hans de Goede
  • [U-Boot] [PATCH 07/15] sunxi_nand_spl: Turn off clocks when we're done with the nand   Ian Campbell
  • [U-Boot] [PATCH 07/15] sunxi_nand_spl: Turn off clocks when we're done with the nand   Maxime Ripard
    • [U-Boot] [PATCH 07/15] sunxi_nand_spl: Turn off clocks when we're done with the nand   Hans de Goede
      • [U-Boot] [PATCH 07/15] sunxi_nand_spl: Turn off clocks when we're done with the nand   Maxime Ripard
• [U-Boot] [PATCH 08/15] sunxi_nand_spl: Add proper cache flusing   Hans de Goede
  • [U-Boot] [PATCH 08/15] sunxi_nand_spl: Add proper cache flusing   Ian Campbell
• [U-Boot] [PATCH 09/15] sunxi_nand_spl: Use kernel driver algorithm for determining ecc_mode / _off   Hans de Goede
  • [U-Boot] [PATCH 09/15] sunxi_nand_spl: Use kernel driver algorithm for determining ecc_mode / _off   Ian Campbell
• [U-Boot] [PATCH 10/15] sunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END   Hans de Goede
  • [U-Boot] [PATCH 10/15] sunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END   Ian Campbell
    • [U-Boot] [PATCH 10/15] sunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END   Hans de Goede
• [U-Boot] [PATCH 11/15] sunxi_nand_spl: Add support for sun4i and sun5i SoCs   Hans de Goede
  • [U-Boot] [PATCH 11/15] sunxi_nand_spl: Add support for sun4i and sun5i SoCs   Ian Campbell
    • [U-Boot] [PATCH 11/15] sunxi_nand_spl: Add support for sun4i and sun5i SoCs   Hans de Goede
      • [U-Boot] [PATCH 11/15] sunxi_nand_spl: Add support for sun4i and sun5i SoCs   Ian Campbell
• [U-Boot] [PATCH 12/15] sunxi_nand_spl: Properly config page-size in the nand ctl register   Hans de Goede
  • [U-Boot] [PATCH 12/15] sunxi_nand_spl: Properly config page-size in the nand ctl register   Ian Campbell
• [U-Boot] [PATCH 13/15] sunxi_nand_spl: Parametrize lowlevel read functions   Hans de Goede
  • [U-Boot] [PATCH 13/15] sunxi_nand_spl: Parametrize lowlevel read functions   Ian Campbell
• [U-Boot] [PATCH 14/15] sunxi_nand_spl: Auto detect nand configuration parameters   Hans de Goede
  • [U-Boot] [PATCH 14/15] sunxi_nand_spl: Auto detect nand configuration parameters   Ian Campbell
• [U-Boot] [PATCH 15/15] sunxi_nand_spl: Add support for backup boot partitions   Hans de Goede
  • [U-Boot] [PATCH 15/15] sunxi_nand_spl: Add support for backup boot partitions   Ian Campbell
• [U-Boot] [PATCH] Drop include/configs/odroid_xu3.h.rej   Simon Glass
  • [U-Boot] [PATCH] Drop include/configs/odroid_xu3.h.rej   Tom Rini
• [U-Boot] [PATCH v2 0/7] x86: Support multiple microcode blobs for FSP   Simon Glass
  • [U-Boot] [PATCH v2 1/7] x86: Correct microcode documentation   Simon Glass
    • [U-Boot] [PATCH v2 1/7] x86: Correct microcode documentation   Bin Meng
      • [U-Boot] [PATCH v2 1/7] x86: Correct microcode documentation   Simon Glass
  • [U-Boot] [PATCH v2 2/7] x86: baytrail: Add microcode for BayTrail-I D0 stepping   Simon Glass
    • [U-Boot] [PATCH v2 2/7] x86: baytrail: Add microcode for BayTrail-I D0 stepping   Simon Glass
  • [U-Boot] [PATCH v2 3/7] x86: baytrail: Support multiple microcode copies   Simon Glass
    • [U-Boot] [PATCH v2 3/7] x86: baytrail: Support multiple microcode copies   Simon Glass
  • [U-Boot] [PATCH v2 4/7] x86: ifdtool: Check that U-Boot does not overlap other regions   Simon Glass
    • [U-Boot] [PATCH v2 4/7] x86: ifdtool: Check that U-Boot does not overlap other regions   Bin Meng
      • [U-Boot] [PATCH v2 4/7] x86: ifdtool: Check that U-Boot does not overlap other regions   Simon Glass
  • [U-Boot] [PATCH v2 5/7] x86: ifdtool: Split microcode linking into its own function   Simon Glass
    • [U-Boot] [PATCH v2 5/7] x86: ifdtool: Split microcode linking into its own function   Bin Meng
      • [U-Boot] [PATCH v2 5/7] x86: ifdtool: Split microcode linking into its own function   Simon Glass
  • [U-Boot] [PATCH v2 6/7] x86: ifdtool: Support collating microcode into one place   Simon Glass
    • [U-Boot] [PATCH v2 6/7] x86: ifdtool: Support collating microcode into one place   Bin Meng
  • [U-Boot] [PATCH v2 7/7] x86: ifdtool: Drop microcode from the device tree when collating   Simon Glass
    • [U-Boot] [PATCH v2 7/7] x86: ifdtool: Drop microcode from the device tree when collating   Bin Meng
      • [U-Boot] [PATCH v2 7/7] x86: ifdtool: Drop microcode from the device tree when collating   Simon Glass
• [U-Boot] [PATCH] arm: mxs: fix mac address of second interface   Michael Heimpold
  • [U-Boot] [PATCH] arm: mxs: fix mac address of second interface   Marek Vasut
    • [U-Boot] [PATCH] arm: mxs: fix mac address of second interface   Michael Heimpold
      • [U-Boot] [PATCH] arm: mxs: fix mac address of second interface   Marek Vasut
  • [U-Boot] [PATCH] arm: mxs: fix mac address of second interface   Stefano Babic
    • [U-Boot] [PATCH] arm: mxs: fix mac address of second interface   Michael Heimpold
• [U-Boot] [PATCH 01/11] arm: pxa: clean-up include file order   Marcel Ziswiler
  • [U-Boot] [PATCH 02/11] arm: pxa: mmc: clean-up include file order   Marcel Ziswiler
  • [U-Boot] [PATCH 03/11] arm: tegra: mmc: clean-up include file order   Marcel Ziswiler
    • [U-Boot] [PATCH 03/11] arm: tegra: mmc: clean-up include file order   Simon Glass
      • [U-Boot] [PATCH 03/11] arm: tegra: mmc: clean-up include file order   Marcel Ziswiler
      • [U-Boot] [PATCH 03/11] arm: tegra: mmc: clean-up include file order   Simon Glass
      • [U-Boot] [PATCH 03/11] arm: tegra: mmc: clean-up include file order   Marcel Ziswiler
      • [U-Boot] [PATCH 03/11] arm: tegra: mmc: clean-up include file order   Tom Warren
      • [U-Boot] [PATCH 03/11] arm: tegra: mmc: clean-up include file order   Marcel Ziswiler
      • [U-Boot] [PATCH 03/11] arm: tegra: mmc: clean-up include file order   Simon Glass
      • [U-Boot] [PATCH 03/11] arm: tegra: mmc: clean-up include file order   Marcel Ziswiler
      • [U-Boot] [PATCH 03/11] arm: tegra: mmc: clean-up include file order   Simon Glass
      • [U-Boot] [PATCH 03/11] arm: tegra: mmc: clean-up include file order   Tom Warren
      • [U-Boot] [PATCH 03/11] arm: tegra: mmc: clean-up include file order   Marcel Ziswiler
      • [U-Boot] [PATCH 03/11] arm: tegra: mmc: clean-up include file order   Simon Glass
  • [U-Boot] [PATCH 04/11] serial: pxa: clean-up include file order   Marcel Ziswiler
  • [U-Boot] [PATCH 05/11] usb: pxa27x_udc: clean-up include file order   Marcel Ziswiler
  • [U-Boot] [PATCH 06/11] lcd: pxa: clean-up include file order   Marcel Ziswiler
  • [U-Boot] [PATCH 07/11] arm: pxa: colibri_pxa270: fix boot hang   Marcel Ziswiler
    • [U-Boot] [PATCH 07/11] arm: pxa: colibri_pxa270: fix boot hang   Marek Vasut
      • [U-Boot] [PATCH 07/11] arm: pxa: colibri_pxa270: fix boot hang   Marcel Ziswiler
      • [U-Boot] [PATCH 07/11] arm: pxa: colibri_pxa270: fix boot hang   Marek Vasut
  • [U-Boot] [PATCH 08/11] arm: pxa: palmtreo680: get rid of obsolete CONFIG_SYS_LCD_PXA_NO_L_BIAS   Marcel Ziswiler
  • [U-Boot] [PATCH 09/11] arm: pxa: colibri_pxa270: add some more nor flash details   Marcel Ziswiler
  • [U-Boot] [PATCH 10/11] arm: pxa: colibri_pxa270: add optional lcd support   Marcel Ziswiler
  • [U-Boot] [PATCH 11/11] arm: pxa: colibri_pxa270: add optional i2c support   Marcel Ziswiler
  • [U-Boot] [PATCH 01/11] arm: pxa: clean-up include file order   Marek Vasut
    • [U-Boot] [PATCH 01/11] arm: pxa: clean-up include file order   Marcel Ziswiler
      • [U-Boot] [PATCH 01/11] arm: pxa: clean-up include file order   Marek Vasut
      • [U-Boot] [PATCH 01/11] arm: pxa: clean-up include file order   Marcel Ziswiler
• [U-Boot] [UBOOT] [PATCH v4 0/3] Add ACPI table support   Saket Sinha
  • [U-Boot] [UBOOT PATCH v4 2/3] x86: Add ACPI table support to QEMU   Saket Sinha
  • [U-Boot] [UBOOT PATCH v4 3/3] x86: Add DSDT table for supporting ACPI on QEMU   Saket Sinha
• [U-Boot] [PATCH 3/6] sf: Make BAR discovery, as spi_flash_read_bar   Jagan Teki
• [U-Boot] [PATCH 4/6] sf: Optimize BAR write code   Jagan Teki
• [U-Boot] [PATCH 5/6] sf: Make flash->flags use for generic usage   Jagan Teki
• [U-Boot] [PATCH 6/6] sf: Update spi_flash_cmd_wait_ready   Jagan Teki
  • [U-Boot] [PATCH 6/6] sf: Update spi_flash_cmd_wait_ready   Marek Vasut
• [U-Boot] [PATCH 0/6] sf: BAR/wait_ready logic updates   Jagan Teki
  • [U-Boot] [PATCH 0/6] sf: BAR/wait_ready logic updates   Jagan Teki
    • [U-Boot] [PATCH 1/6] spi: zynq_spi: Remove unneeded headers   Jagan Teki
    • [U-Boot] [PATCH 2/6] sf: Return proper bank_sel, if flash->bank_curr == bank_sel   Jagan Teki
  • [U-Boot] [PATCH 0/6] sf: BAR/wait_ready logic updates   Jagan Teki
    • [U-Boot] [PATCH 0/6] sf: BAR/wait_ready logic updates   Hou Zhiqiang
      • [U-Boot] [PATCH 0/6] sf: BAR/wait_ready logic updates   Jagan Teki
• [U-Boot] [PATCH 1/3] sunxi: musb: Drop no longer accurate comment in Kconfig help text   Hans de Goede
  • [U-Boot] [PATCH 3/3] sunxi: Add CONFIG_MMC0_CD_PIN to various boards   Hans de Goede
    • [U-Boot] [PATCH 3/3] sunxi: Add CONFIG_MMC0_CD_PIN to various boards   Chen-Yu Tsai
    • [U-Boot] [PATCH 3/3] sunxi: Add CONFIG_MMC0_CD_PIN to various boards   Ian Campbell
  • [U-Boot] [PATCH 1/3] sunxi: musb: Drop no longer accurate comment in Kconfig help text   Ian Campbell
• [U-Boot] [PATCH 2/3] sunxi: Drop LCD_MODE from A13-OLinuxIno defconfigs   Hans de Goede
  • [U-Boot] [PATCH 2/3] sunxi: Drop LCD_MODE from A13-OLinuxIno defconfigs   Ian Campbell
• [U-Boot] [PATCH 0/8] dm: rockchip: Enable booting from MMC   Sjoerd Simons
  • [U-Boot] [PATCH 1/8] doc: Fix reference to Rock pro when Rock 2 is meant   Sjoerd Simons
    • [U-Boot] [PATCH 1/8] doc: Fix reference to Rock pro when Rock 2 is meant   Simon Glass
  • [U-Boot] [PATCH 2/8] mmc: Probe DM based mmc devices in u-boot   Sjoerd Simons
    • [U-Boot] [PATCH 2/8] mmc: Probe DM based mmc devices in u-boot   Simon Glass
  • [U-Boot] [PATCH 3/8] rockchip: Disable sdio mmc slot on rk3288-firefly   Sjoerd Simons
    • [U-Boot] [PATCH 3/8] rockchip: Disable sdio mmc slot on rk3288-firefly   Simon Glass
  • [U-Boot] [PATCH 4/8] rockchip: Turn off CONFIG_SPL_LED_SUPPORT for firefly   Sjoerd Simons
    • [U-Boot] [PATCH 4/8] rockchip: Turn off CONFIG_SPL_LED_SUPPORT for firefly   Simon Glass
  • [U-Boot] [PATCH 5/8] rockchip: Add config_distro_bootcmd support   Sjoerd Simons
    • [U-Boot] [PATCH 5/8] rockchip: Add config_distro_bootcmd support   Simon Glass
  • [U-Boot] [PATCH 6/8] arm: Turn of d-cache before i-cache   Sjoerd Simons
    • [U-Boot] [PATCH 6/8] arm: Turn of d-cache before i-cache   Simon Glass
  • [U-Boot] [PATCH 7/8] rockchip: Drop first 32kb of zeros from the rksd image type   Sjoerd Simons
    • [U-Boot] [PATCH 7/8] rockchip: Drop first 32kb of zeros from the rksd image type   Simon Glass
  • [U-Boot] [PATCH 8/8] rockchip: Update todo in README.rockchip   Sjoerd Simons
    • [U-Boot] [PATCH 8/8] rockchip: Update todo in README.rockchip   Simon Glass
  • [U-Boot] [PATCH 0/8] dm: rockchip: Enable booting from MMC   Simon Glass
    • [U-Boot] [PATCH 0/8] dm: rockchip: Enable booting from MMC   Sjoerd Simons
• [U-Boot] [UBOOT PATCH v4 1/3] x86: Generate a valid ACPI table   Simon Glass
  • [U-Boot] [UBOOT PATCH v4 1/3] x86: Generate a valid ACPI table   Saket Sinha
• [U-Boot] [UBOOT PATCH v4 2/3] x86: Add ACPI table support to QEMU   Simon Glass
  • [U-Boot] [UBOOT PATCH v4 2/3] x86: Add ACPI table support to QEMU   Saket Sinha
• [U-Boot] [UBOOT PATCH v4 3/3] x86: Add DSDT table for supporting ACPI on QEMU   Simon Glass
• [U-Boot] [PATCH 0/9] imx: mx6: support LPDDR2 and add mx6slevk spl   Peng Fan
  • [U-Boot] [PATCH 8/9] imx: mx6: ddr: add LPDDR2 support   Peng Fan
  • [U-Boot] [PATCH 9/9] imx: mx6slevk: add SPL support   Peng Fan
  • [U-Boot] [PATCH 0/9] imx: mx6: support LPDDR2 and add mx6slevk spl   Peng Fan
    • [U-Boot] [PATCH 1/9] imx: mx6: ddr add more register entry for mmdc_p_regs   Peng Fan
      • [U-Boot] [PATCH 1/9] imx: mx6: ddr add more register entry for mmdc_p_regs   Stefano Babic
    • [U-Boot] [PATCH 2/9] imx: mx6: ddr no support MMDC1 for i.MX6SL   Peng Fan
      • [U-Boot] [PATCH 2/9] imx: mx6: ddr no support MMDC1 for i.MX6SL   Stefano Babic
    • [U-Boot] [PATCH 3/9] imx: mx6: ddr correct tRFC and tXS   Peng Fan
      • [U-Boot] [PATCH 3/9] imx: mx6: ddr correct tRFC and tXS   Stefano Babic
    • [U-Boot] [PATCH 4/9] imx: mx6: ddr add dram io configuration and header file for i.MX6SL   Peng Fan
    • [U-Boot] [PATCH 5/9] imx: mx6: ddr add mpzqlp2ctl entry   Peng Fan
    • [U-Boot] [PATCH 6/9] imx: mx6: ddr add an entry ddr_type for mx6_ddr_sysinfo   Peng Fan
    • [U-Boot] [PATCH 7/9] imx: mx6: ddr init MMDC according to ddr_type   Peng Fan
    • [U-Boot] [PATCH 8/9] imx: mx6: ddr: add LPDDR2 support   Peng Fan
    • [U-Boot] [PATCH 9/9] imx: mx6slevk: add SPL support   Peng Fan
    • [U-Boot] [PATCH 0/9] imx: mx6: support LPDDR2 and add mx6slevk spl   Stefano Babic
• [U-Boot] [PATCH 1/9] imx: mx6: ddr add more register entry for mmdc_p_regs   Peng Fan
• [U-Boot] [PATCH 2/9] imx: mx6: ddr no support MMDC1 for i.MX6SL   Peng Fan
• [U-Boot] [PATCH 3/9] imx: mx6: ddr correct tRFC and tXS   Peng Fan
• [U-Boot] [PATCH 4/9] imx: mx6: ddr add dram io configuration and header file for i.MX6SL   Peng Fan
• [U-Boot] [PATCH 5/9] imx: mx6: ddr add mpzqlp2ctl entry   Peng Fan
• [U-Boot] [PATCH 6/9] imx: mx6: ddr add an entry ddr_type for mx6_ddr_sysinfo   Peng Fan
• [U-Boot] [PATCH 7/9] imx: mx6: ddr init MMDC according to ddr_type   Peng Fan
  • [U-Boot] [PATCH 7/9] imx: mx6: ddr init MMDC according to ddr_type   Stefan Roese
    • [U-Boot] [PATCH 7/9] imx: mx6: ddr init MMDC according to ddr_type   Peng Fan
      • [U-Boot] [PATCH 7/9] imx: mx6: ddr init MMDC according to ddr_type   Stefan Roese
      • [U-Boot] [PATCH 7/9] imx: mx6: ddr init MMDC according to ddr_type   Peng Fan
      • [U-Boot] [PATCH 7/9] imx: mx6: ddr init MMDC according to ddr_type   Stefan Roese
• [U-Boot] [PATCH] ARM: davinci: remove support for CAM ENC 4xx   Heiko Schocher
  • [U-Boot] [PATCH] ARM: davinci: remove support for CAM ENC 4xx   Masahiro Yamada
    • [U-Boot] [PATCH] ARM: davinci: remove support for CAM ENC 4xx   Marek Vasut
      • [U-Boot] [PATCH] ARM: davinci: remove support for CAM ENC 4xx   Masahiro Yamada
      • [U-Boot] [PATCH] ARM: davinci: remove support for CAM ENC 4xx   Simon Glass
      • [U-Boot] [PATCH] ARM: davinci: remove support for CAM ENC 4xx   Masahiro Yamada
  • [U-Boot] [PATCH] ARM: davinci: remove support for CAM ENC 4xx   Masahiro Yamada
• [U-Boot] What's purpose of DEV_FLAGS_SYSTEM and DEV_EXT_VIDEO?   Bin Meng
• [U-Boot] [PATCH] arm: delete unnecessary file   Minkyu Kang
• [U-Boot] [PATCH] e1000: support 64bit physical address   Mingkai Hu
  • [U-Boot] [PATCH] e1000: support 64bit physical address   Bin Meng
    • [U-Boot] [PATCH] e1000: support 64bit physical address   Sergei Temerkhanov
• [U-Boot] [PATCH] Remove odroid_xu3.h.rej   Masahiro Yamada
  • [U-Boot] [PATCH] Remove odroid_xu3.h.rej   Przemyslaw Marczak
    • [U-Boot] [PATCH] Remove odroid_xu3.h.rej   Masahiro Yamada
      • [U-Boot] [PATCH] Remove odroid_xu3.h.rej   Bin Meng
• [U-Boot] arm: ls1021a: Ensure LS1021 ARM Generic Timer CompareValue Set 64-bit   Alexander Stein
• [U-Boot] [U-Boot RESEND v2 00/10] Enable edma support for ti-qspi   Vignesh R
  • [U-Boot] [U-Boot RESEND v2 01/10] sf: allocate cache aligned buffers to copy from flash   Vignesh R
    • [U-Boot] [U-Boot RESEND v2 01/10] sf: allocate cache aligned buffers to copy from flash   Jagan Teki
  • [U-Boot] [U-Boot RESEND v2 02/10] env: use cache line aligned memory for flash read   Vignesh R
  • [U-Boot] [U-Boot RESEND v2 03/10] ARM: AM43xx: Add support for disabling clocks in uboot   Vignesh R
  • [U-Boot] [U-Boot RESEND v2 04/10] ARM: OMAP5: Add support for disabling clocks in uboot   Vignesh R
  • [U-Boot] [U-Boot RESEND v2 05/10] ARM: OMAP5: Add functions to enable and disable EDMA3 clocks   Vignesh R
  • [U-Boot] [U-Boot RESEND v2 06/10] ARM: AM43XX: Add functions to enable and disable EDMA3 clocks   Vignesh R
  • [U-Boot] [U-Boot RESEND v2 07/10] sf: ops: Add spi_flash_copy_mmap function   Vignesh R
  • [U-Boot] [U-Boot RESEND v2 08/10] dma: ti-edma3: Add helper function to support edma3 transfer   Vignesh R
  • [U-Boot] [U-Boot RESEND v2 09/10] spi: ti_qspi: Use DMA to read from qspi flash   Vignesh R
    • [U-Boot] [U-Boot RESEND v2 09/10] spi: ti_qspi: Use DMA to read from qspi flash   Jagan Teki
      • [U-Boot] [U-Boot RESEND v2 09/10] spi: ti_qspi: Use DMA to read from qspi flash   R, Vignesh
    • [U-Boot] [U-Boot RESEND v2 09/10] spi: ti_qspi: Use DMA to read from qspi flash   Vignesh R
  • [U-Boot] [U-Boot RESEND v2 10/10] ARM: dra7xx_evm: Enable EDMA3 in SPL to support DMA on qspi   Vignesh R
  • [U-Boot] [U-Boot RESEND v2 00/10] Enable edma support for ti-qspi   Jagan Teki
• [U-Boot] [PATCH] imx: mx6sxsabresd: enable CONFIG_SPL_FAT_SUPPORT   Peng Fan
  • [U-Boot] [PATCH] imx: mx6sxsabresd: enable CONFIG_SPL_FAT_SUPPORT   Stefano Babic
  • [U-Boot] [PATCH] imx: mx6sxsabresd: enable CONFIG_SPL_FAT_SUPPORT   Stefano Babic
• [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Yuantian.Tang at freescale.com
  • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   York Sun
    • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Yuantian Tang
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   York Sun
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Yuantian Tang
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Yuantian Tang
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   York Sun
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Yuantian Tang
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   York Sun
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Yuantian Tang
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   York Sun
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Yuantian Tang
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   York Sun
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Yuantian Tang
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Kushwaha Prabhakar
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Yuantian Tang
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Kushwaha Prabhakar
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Yuantian Tang
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Kushwaha Prabhakar
      • [U-Boot] [PATCH v2] arm/ls1021a: Add sata support on qds and twr board   Yuantian Tang
• [U-Boot] [PATCH v2] arm/ls2085a: Add sata support on qds and rdb board   Yuantian.Tang at freescale.com
  • [U-Boot] [PATCH v2] arm/ls2085a: Add sata support on qds and rdb board   York Sun
• [U-Boot] [PATCH v2 0/7] BAR/wait_ready logic updates   Jagan Teki
  • [U-Boot] [PATCH v2 1/7] spi: zynq_spi: Remove unneeded headers   Jagan Teki
  • [U-Boot] [PATCH v2 2/7] sf: Return proper bank_sel, if flash->bank_curr == bank_sel   Jagan Teki
  • [U-Boot] [PATCH v2 3/7] sf: Make BAR discovery, as spi_flash_read_bar   Jagan Teki
    • [U-Boot] [PATCH v2 3/7] sf: Make BAR discovery, as spi_flash_read_bar   Bin Meng
      • [U-Boot] [PATCH v2 3/7] sf: Make BAR discovery, as spi_flash_read_bar   Jagan Teki
  • [U-Boot] [PATCH v2 4/7] sf: Optimize BAR write code   Jagan Teki
  • [U-Boot] [PATCH v2 5/7] sf: Make flash->flags use for generic usage   Jagan Teki
    • [U-Boot] [PATCH v2 5/7] sf: Make flash->flags use for generic usage   Bin Meng
      • [U-Boot] [PATCH v2 5/7] sf: Make flash->flags use for generic usage   Jagan Teki
  • [U-Boot] [PATCH v2 6/7] sf: Update status reg check in spi_flash_cmd_wait_ready   Jagan Teki
    • [U-Boot] [PATCH v2 6/7] sf: Update status reg check in spi_flash_cmd_wait_ready   Marek Vasut
      • [U-Boot] [PATCH v2 6/7] sf: Update status reg check in spi_flash_cmd_wait_ready   Jagan Teki
  • [U-Boot] [PATCH v2 7/7] sf: Add FSR support to spi_flash_cmd_wait_ready   Jagan Teki
    • [U-Boot] [PATCH v2 7/7] sf: Add FSR support to spi_flash_cmd_wait_ready   Marek Vasut
      • [U-Boot] [PATCH v2 7/7] sf: Add FSR support to spi_flash_cmd_wait_ready   Jagan Teki
      • [U-Boot] [PATCH v2 7/7] sf: Add FSR support to spi_flash_cmd_wait_ready   Marek Vasut
      • [U-Boot] [PATCH v2 7/7] sf: Add FSR support to spi_flash_cmd_wait_ready   Jagan Teki
      • [U-Boot] [PATCH v2 7/7] sf: Add FSR support to spi_flash_cmd_wait_ready   Marek Vasut
      • [U-Boot] [PATCH v2 7/7] sf: Add FSR support to spi_flash_cmd_wait_ready   Jagan Teki
      • [U-Boot] [PATCH v2 7/7] sf: Add FSR support to spi_flash_cmd_wait_ready   Marek Vasut
  • [U-Boot] [PATCH v2 0/7] BAR/wait_ready logic updates   Bin Meng
    • [U-Boot] [PATCH v2 0/7] BAR/wait_ready logic updates   Jagan Teki
      • [U-Boot] [PATCH v2 0/7] BAR/wait_ready logic updates   Bin Meng
• [U-Boot] [PATCH 1/5] x86: superio: Add keyboard controller support to smsc_lpc47m driver   Bin Meng
  • [U-Boot] [PATCH 1/5] x86: superio: Add keyboard controller support to smsc_lpc47m driver   Simon Glass
    • [U-Boot] [PATCH 1/5] x86: superio: Add keyboard controller support to smsc_lpc47m driver   Bin Meng
• [U-Boot] [PATCH 2/5] x86: i8042: Correctly initialize the controller   Bin Meng
  • [U-Boot] [PATCH 2/5] x86: i8042: Correctly initialize the controller   Simon Glass
• [U-Boot] [PATCH 3/5] x86: i8042: Clean up the driver   Bin Meng
  • [U-Boot] [PATCH 3/5] x86: i8042: Clean up the driver   Simon Glass
    • [U-Boot] [PATCH 3/5] x86: i8042: Clean up the driver   Bin Meng
• [U-Boot] [PATCH 4/5] video: cfb_console: Allow VGA device to work without i8042 keyboard   Bin Meng
  • [U-Boot] [PATCH 4/5] video: cfb_console: Allow VGA device to work without i8042 keyboard   Simon Glass
    • [U-Boot] [PATCH 4/5] video: cfb_console: Allow VGA device to work without i8042 keyboard   Bin Meng
• [U-Boot] [PATCH 5/5] x86: crownbay: Enable on-board SMSC superio keyboard controller   Bin Meng
  • [U-Boot] [PATCH 5/5] x86: crownbay: Enable on-board SMSC superio keyboard controller   Simon Glass
• [U-Boot] [PATCH] ARM: fix the misset of global data pointer   Masahiro Yamada
  • [U-Boot] [PATCH] ARM: fix the misset of global data pointer   Simon Glass
• [U-Boot] [PATCH v3] usb: xhci: Fix a potential NULL pointer dereference   Sergey Temerkhanov
  • [U-Boot] [PATCH v3] usb: xhci: Fix a potential NULL pointer dereference   Marek Vasut
• [U-Boot] [PATCH v3 00/16] spi: zynq qspi support   Jagan Teki
  • [U-Boot] [PATCH v3 01/16] spi: Add zynq qspi controller driver   Jagan Teki
    • [U-Boot] [PATCH v3 01/16] spi: Add zynq qspi controller driver   Simon Glass
  • [U-Boot] [PATCH v3 02/16] dts: zynq: Add zynq qspi controller nodes   Jagan Teki
  • [U-Boot] [PATCH v3 03/16] doc: device-tree-bindings: spi: Add zynq qspi info   Jagan Teki
  • [U-Boot] [PATCH v3 04/16] dts: microzed: Enable zynq qspi controller node   Jagan Teki
  • [U-Boot] [PATCH v3 05/16] dts: zc702: Enable zynq qspi controller node   Jagan Teki
  • [U-Boot] [PATCH v3 06/16] dts: zc706: Enable zynq qspi controller node   Jagan Teki
  • [U-Boot] [PATCH v3 07/16] dts: zc770-xm010: Enable zynq qspi controller node   Jagan Teki
  • [U-Boot] [PATCH v3 08/16] dts: zed: Enable zynq qspi controller node   Jagan Teki
  • [U-Boot] [PATCH v3 09/16] configs: Enable legacy SPI flash interface support   Jagan Teki
  • [U-Boot] [PATCH v3 10/16] zynq-common: Enable zynq qspi controller support   Jagan Teki
  • [U-Boot] [PATCH v3 11/16] zynq-common: Enable Bank/Extended address register support   Jagan Teki
  • [U-Boot] [PATCH v3 12/16] configs: zynq: Enable zynq qspi controller   Jagan Teki
  • [U-Boot] [PATCH v3 13/16] spi: Kconfig: Add Zynq QSPI controller entry   Jagan Teki
    • [U-Boot] [PATCH v3 13/16] spi: Kconfig: Add Zynq QSPI controller entry   Simon Glass
  • [U-Boot] [PATCH v3 14/16] spi: zynq_spi: Add config reg shift named macros   Jagan Teki
  • [U-Boot] [PATCH v3 15/16] spi: zynq_spi: Rename baudrate divisor mask name   Jagan Teki
  • [U-Boot] [PATCH v3 16/16] spi: zynq_spi: Store cs value into private data   Jagan Teki
• [U-Boot] spi-nor: Choices of choosing bank or 4-byte addressing   Jagan Teki
  • [U-Boot] spi-nor: Choices of choosing bank or 4-byte addressing   Marek Vasut
• [U-Boot] [PATCH 0/5] ARM: keystone2: Build images by default   Lokesh Vutla
  • [U-Boot] [PATCH 1/5] ARM: keystone2: configs: Move SP to end of u-boot section   Lokesh Vutla
    • [U-Boot] [PATCH 1/5] ARM: keystone2: configs: Move SP to end of u-boot section   menon.nishanth at gmail.com
      • [U-Boot] [PATCH 1/5] ARM: keystone2: configs: Move SP to end of u-boot section   Lokesh Vutla
      • [U-Boot] [PATCH 1/5] ARM: keystone2: configs: Move SP to end of u-boot section   menon.nishanth at gmail.com
    • [U-Boot] [U-Boot, 1/5] ARM: keystone2: configs: Move SP to end of u-boot section   Tom Rini
  • [U-Boot] [PATCH 2/5] ARM: keystone2: move the custom build rules out to keystone specific makefile   Lokesh Vutla
    • [U-Boot] [U-Boot, 2/5] ARM: keystone2: move the custom build rules out to keystone specific makefile   Tom Rini
  • [U-Boot] [PATCH 3/5] ARM: keystone2: Rename u-boot-nand.gph to MLO   Lokesh Vutla
    • [U-Boot] [U-Boot, 3/5] ARM: keystone2: Rename u-boot-nand.gph to MLO   Tom Rini
  • [U-Boot] [PATCH 4/5] ARM: keystone2: Build MLO by default   Lokesh Vutla
    • [U-Boot] [U-Boot,4/5] ARM: keystone2: Build MLO by default   Tom Rini
  • [U-Boot] [PATCH 5/5] ARM: keystone2: Update README   Lokesh Vutla
    • [U-Boot] [U-Boot,5/5] ARM: keystone2: Update README   Tom Rini
• [U-Boot] [PATCH] ARM: k2l: Fix device speeds   Lokesh Vutla
  • [U-Boot] ARM: k2l: Fix device speeds   Tom Rini
• [U-Boot] [PATCH] Revert "Align global_data to a 16-byte boundary"   Simon Glass
  • [U-Boot] [PATCH] Revert "Align global_data to a 16-byte boundary"   Tom Rini
    • [U-Boot] [PATCH] Revert "Align global_data to a 16-byte boundary"   Sergei Temerkhanov
      • [U-Boot] [PATCH] Revert "Align global_data to a 16-byte boundary"   Simon Glass
• [U-Boot] [PATCH V2] ti: qspi: set flash quad bit based on quad support flag   Vishal Mahaveer
• [U-Boot] malloc_simple: Allow malloc_simple to be used with non stack RAM   Hans de Goede
  • [U-Boot] [PATCH 1/3] malloc_simple: Allow malloc_simple to be used with non stack RAM   Hans de Goede
    • [U-Boot] [PATCH 1/3] malloc_simple: Allow malloc_simple to be used with non stack RAM   Simon Glass
      • [U-Boot] [PATCH 1/3] malloc_simple: Allow malloc_simple to be used with non stack RAM   Hans de Goede
      • [U-Boot] [PATCH 1/3] malloc_simple: Allow malloc_simple to be used with non stack RAM   Simon Glass
      • [U-Boot] [PATCH 1/3] malloc_simple: Allow malloc_simple to be used with non stack RAM   Simon Glass
      • [U-Boot] [PATCH 1/3] malloc_simple: Allow malloc_simple to be used with non stack RAM   Hans de Goede
  • [U-Boot] [PATCH 2/3] sunxi: Switch to using malloc_simple for the spl   Hans de Goede
    • [U-Boot] [PATCH 2/3] sunxi: Switch to using malloc_simple for the spl   Ian Campbell
  • [U-Boot] [PATCH 3/3] sunxi: sunxi-common.h cleanup   Hans de Goede
    • [U-Boot] [PATCH 3/3] sunxi: sunxi-common.h cleanup   Ian Campbell
• [U-Boot] Please pull u-boot-marvell master   Luka Perkov
  • [U-Boot] Please pull u-boot-marvell master   Tom Rini
• [U-Boot] [UBOOT PATCH v5 0/3] Add ACPI table support   Saket Sinha
  • [U-Boot] [UBOOT PATCH v5 1/3] x86: Generate a valid ACPI table   Saket Sinha
    • [U-Boot] [UBOOT PATCH v5 1/3] x86: Generate a valid ACPI table   Bin Meng
      • [U-Boot] [UBOOT PATCH v5 1/3] x86: Generate a valid ACPI table   Saket Sinha
      • [U-Boot] [UBOOT PATCH v5 1/3] x86: Generate a valid ACPI table   Bin Meng
  • [U-Boot] [UBOOT PATCH v5 2/3] x86: Add ACPI table support to QEMU   Saket Sinha
    • [U-Boot] [UBOOT PATCH v5 2/3] x86: Add ACPI table support to QEMU   Bin Meng
      • [U-Boot] [UBOOT PATCH v5 2/3] x86: Add ACPI table support to QEMU   Saket Sinha
      • [U-Boot] [UBOOT PATCH v5 2/3] x86: Add ACPI table support to QEMU   Bin Meng
  • [U-Boot] [UBOOT PATCH v5 3/3] x86: Add DSDT table for supporting ACPI on QEMU   Saket Sinha
    • [U-Boot] [UBOOT PATCH v5 3/3] x86: Add DSDT table for supporting ACPI on QEMU   Bin Meng
      • [U-Boot] [UBOOT PATCH v5 3/3] x86: Add DSDT table for supporting ACPI on QEMU   Saket Sinha
  • [U-Boot] [UBOOT PATCH v5 0/3] Add ACPI table support   Bin Meng
    • [U-Boot] [UBOOT PATCH v5 0/3] Add ACPI table support   Bin Meng
      • [U-Boot] [UBOOT PATCH v5 0/3] Add ACPI table support   Bin Meng
      • [U-Boot] [UBOOT PATCH v5 0/3] Add ACPI table support   Saket Sinha
• [U-Boot] [PATCH v1 0/2] Fix init_ram for e6500 and e5500   York Sun
  • [U-Boot] [PATCH v1 2/2] powerpc: e6500: Lock/unlock L2 cache instead of L1 as init_ram   York Sun
• [U-Boot] [PATCH v1 1/2] powerpc: configs: Fix init_ram physical address for several boards   York Sun
• [U-Boot] [PATCH v4 0/6] net: Move e1000 driver to driver model and Kconfig   Simon Glass
  • [U-Boot] [PATCH v4 1/6] net: e1000: Move #include of common.h to the C files   Simon Glass
  • [U-Boot] [PATCH v4 2/6] net: e1000: Prepare for driver model conversion   Simon Glass
  • [U-Boot] [PATCH v4 3/6] net: e1000: Convert to driver model   Simon Glass
  • [U-Boot] [PATCH v4 4/6] net: e1000: Add Kconfig options   Simon Glass
    • [U-Boot] [PATCH v4 4/6] net: e1000: Add Kconfig options   Joe Hershberger
  • [U-Boot] [PATCH v4 5/6] Tidy up some defconfig files   Simon Glass
    • [U-Boot] [PATCH v4 5/6] Tidy up some defconfig files   Joe Hershberger
  • [U-Boot] [PATCH v4 6/6] net: Move CONFIG_E1000 options to Kconfig   Simon Glass
• [U-Boot] [PATCH v5 3/6] net: e1000: Convert to driver model   Simon Glass
• [U-Boot] [ANN] U-Boot v2015.10-rc2 released   Tom Rini
  • [U-Boot] [ANN] U-Boot v2015.10-rc2 released   Peter Robinson
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
  • [U-Boot] please pull u-boot-samsung master   Tom Rini
• [U-Boot] [PATCH] patman: use -D option for git format-patch   Masahiro Yamada
  • [U-Boot] [PATCH] patman: use -D option for git format-patch   Simon Glass
  • [U-Boot] [PATCH] patman: use -D option for git format-patch   Heiko Schocher
    • [U-Boot] [PATCH] patman: use -D option for git format-patch   Simon Glass
• [U-Boot] [PATCH v3] armv8: fsl-lsch3: Rewrite MMU translation table entries   Alison Wang
• [U-Boot] [PATCH v4 8/9] ARM64: hikey: Add a README for this board.   Simon Glass
• [U-Boot] [PATCH v3] efi: Update README.efi to clarify build and test instructions   Bin Meng
  • [U-Boot] [PATCH v3] efi: Update README.efi to clarify build and test instructions   Simon Glass
• [U-Boot] [PATCH] sf: Read status and flag status code cleanup   Zhiqiang Hou
  • [U-Boot] [PATCH] sf: Read status and flag status code cleanup   Jagan Teki
• [U-Boot] [PATCH 1/2] RFT: arm: Switch 32-bit ARM to using generic global_data setup   Simon Glass
  • [U-Boot] [PATCH 1/2] RFT: arm: Switch 32-bit ARM to using generic global_data setup   Simon Glass
  • [U-Boot] [PATCH 2/2] RFT: arm: Switch aarch64 to using generic global_data setup   Simon Glass
    • [U-Boot] [PATCH 2/2] RFT: arm: Switch aarch64 to using generic global_data setup   Simon Glass
      • [U-Boot] [PATCH 2/2] RFT: arm: Switch aarch64 to using generic global_data setup   York Sun
      • [U-Boot] [PATCH 2/2] RFT: arm: Switch aarch64 to using generic global_data setup   York Sun
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
  • [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH 1/5] arm: spear: Fix booting - relocate vector table to 0 (low-vector)   Stefan Roese
  • [U-Boot] [PATCH 5/5] arm: spear: Some changes / updates to the x600 config header   Stefan Roese
    • [U-Boot] [U-Boot, 5/5] arm: spear: Some changes / updates to the x600 config header   Tom Rini
  • [U-Boot] [PATCH 1/5] arm: spear: Fix booting - relocate vector table to 0 (low-vector)   Viresh Kumar
  • [U-Boot] [U-Boot, 1/5] arm: spear: Fix booting - relocate vector table to 0 (low-vector)   Tom Rini
• [U-Boot] [PATCH 2/5] arm: spear: Move to common SPL infrastructure   Stefan Roese
  • [U-Boot] [U-Boot, 2/5] arm: spear: Move to common SPL infrastructure   Tom Rini
• [U-Boot] [PATCH 3/5] usb: spear: Add support for both SPEAr600 EHCI controllers   Stefan Roese
  • [U-Boot] [PATCH 3/5] usb: spear: Add support for both SPEAr600 EHCI controllers   Marek Vasut
  • [U-Boot] [U-Boot, 3/5] usb: spear: Add support for both SPEAr600 EHCI controllers   Tom Rini
    • [U-Boot] [U-Boot, 3/5] usb: spear: Add support for both SPEAr600 EHCI controllers   Marek Vasut
• [U-Boot] [PATCH 4/5] arm: spear: Enable caches on SPEAr   Stefan Roese
  • [U-Boot] [U-Boot,4/5] arm: spear: Enable caches on SPEAr   Tom Rini
• [U-Boot] [PATCH V6] sf: Add clear flag status register operation support   Zhiqiang Hou
  • [U-Boot] [PATCH V6] sf: Add clear flag status register operation support   Jagan Teki
• [U-Boot] [PATCH] arm, at91: add axm extensions   Andreas Bießmann
  • [U-Boot] [PATCH] arm, at91: add axm extensions   Heiko Schocher
• [U-Boot] [PATCH] taurus: board updates   Andreas Bießmann
• [U-Boot] [PATCH] corvus, dfu: add dfu support   Andreas Bießmann
• [U-Boot] [RESEND PATCH v6] mtd/nand/ubi: assortment of alignment fixes   Marcel Ziswiler
  • [U-Boot] [RESEND PATCH v6] mtd/nand/ubi: assortment of alignment fixes   Simon Glass
    • [U-Boot] [RESEND PATCH v6] mtd/nand/ubi: assortment of alignment fixes   Marcel Ziswiler
    • [U-Boot] [RESEND PATCH v6] mtd/nand/ubi: assortment of alignment fixes   Scott Wood
      • [U-Boot] [RESEND PATCH v6] mtd/nand/ubi: assortment of alignment fixes   Simon Glass
  • [U-Boot] [U-Boot, RESEND, v6] mtd/nand/ubi: assortment of alignment fixes   Tom Rini
• [U-Boot] Odroid XU4 USB Ethernet r8152 support in u-boot.   Przemyslaw Marczak
  • [U-Boot] Odroid XU4 USB Ethernet r8152 support in u-boot.   Anand Moon
• [U-Boot] ARM: atmel: switch to usb ehci for sama5d3 boards   Andreas Bießmann
  • [U-Boot] ARM: atmel: switch to usb ehci for sama5d3 boards   Andreas Bießmann
    • [U-Boot] ARM: atmel: switch to usb ehci for sama5d3 boards   Josh Wu
• [U-Boot] at91: corvus: board updates   Andreas Bießmann
  • [U-Boot] at91: corvus: board updates   Heiko Schocher
    • [U-Boot] at91: corvus: board updates   Andreas Bießmann
      • [U-Boot] at91: corvus: board updates   Heiko Schocher
• [U-Boot] [v2] net/fman: Support both new and legacy FMan Compatibles   Igal.Liberman
  • [U-Boot] [v2] net/fman: Support both new and legacy FMan Compatibles   Xing Lei
  • [U-Boot] [v2] net/fman: Support both new and legacy FMan Compatibles   Joe Hershberger
• [U-Boot] USB keyboard does not work on DWC2 controller (on Raspberry Pi B)   Guillaume Gardet
  • [U-Boot] USB keyboard does not work on DWC2 controller (on Raspberry Pi B)   Stephen Warren
• [U-Boot] [PATCH v4 0/8] This patch series adds support for Cavium ThunderX 88xx SoC family   Sergey Temerkhanov
  • [U-Boot] [PATCH v4 2/8] armv8: New MMU setup code allowing to use 48+ bits PA/VA   Sergey Temerkhanov
  • [U-Boot] [PATCH v4 3/8] armv8: Add Secure Monitor/Hypervisor Call (SMC/HVC) infrastructure   Sergey Temerkhanov
    • [U-Boot] [PATCH v4 3/8] armv8: Add Secure Monitor/Hypervisor Call (SMC/HVC) infrastructure   Simon Glass
• [U-Boot] [PATCH v4 1/8] armv8: Add read_mpidr() function   Sergey Temerkhanov
• [U-Boot] [PATCH v4 4/8] armv8: Add psci.h from the Linux kernel   Sergey Temerkhanov
• [U-Boot] [PATCH v4 5/8] arm: serial: Add ability to use pre-initialized UARTs   Sergey Temerkhanov
  • [U-Boot] [PATCH v4 5/8] arm: serial: Add ability to use pre-initialized UARTs   Simon Glass
• [U-Boot] [PATCH v4 6/8] armv8: cavium: Add ThunderX 88xx board definition   Sergey Temerkhanov
  • [U-Boot] [PATCH v4 6/8] armv8: cavium: Add ThunderX 88xx board definition   Simon Glass
• [U-Boot] [PATCH v4 7/8] armv8: cavium: Add an implementation of ATF calling functions   Sergey Temerkhanov
• [U-Boot] [PATCH v4 8/8] armv8: cavium: Get DRAM size from ATF   Sergey Temerkhanov
  • [U-Boot] [PATCH v4 8/8] armv8: cavium: Get DRAM size from ATF   Jagan Teki
    • [U-Boot] [PATCH v4 8/8] armv8: cavium: Get DRAM size from ATF   Sergei Temerkhanov
      • [U-Boot] [PATCH v4 8/8] armv8: cavium: Get DRAM size from ATF   Jagan Teki
• [U-Boot] [PATCH] tftp: adjust settings to be suitable for 100Mbit ethernet   Pavel Machek
  • [U-Boot] [PATCH] tftp: adjust settings to be suitable for 100Mbit ethernet   Joe Hershberger
  • [U-Boot] [PATCH] tftp: adjust settings to be suitable for 100Mbit ethernet   Joe Hershberger
• [U-Boot] x86: Stuck trying to build a non-qemu EFI payload   Stoppa, Igor
• [U-Boot] [PATCH v2] corvus, dfu: add dfu support   Heiko Schocher
  • [U-Boot] [PATCH v2] corvus, dfu: add dfu support   Lukasz Majewski
    • [U-Boot] [PATCH v2] corvus, dfu: add dfu support   Heiko Schocher
• [U-Boot] [PATCH v2] at91: corvus: board updates   Heiko Schocher
• [U-Boot] [PATCH v2] arm, at91: add axm extensions   Heiko Schocher
  • [U-Boot] [U-Boot,v2] arm, at91: add axm extensions   Andreas Bießmann
  • [U-Boot] [PATCH v2] arm, at91: add axm extensions   Andreas Bießmann
• [U-Boot] [PATCH v2] taurus: board updates   Heiko Schocher
  • [U-Boot] [U-Boot,v2] taurus: board updates   Andreas Bießmann
    • [U-Boot] [U-Boot,v2] taurus: board updates   Andreas Bießmann
• [U-Boot] [PATCH] ARM: rpi: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Guillaume GARDET
  • [U-Boot] [PATCH] ARM: rpi: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Stephen Warren
    • [U-Boot] [PATCH] ARM: rpi: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Guillaume Gardet
      • [U-Boot] [PATCH] ARM: rpi: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Stephen Warren
      • [U-Boot] [PATCH] ARM: rpi: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Ian Lepore
      • [U-Boot] [PATCH] ARM: rpi: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Stephen Warren
    • [U-Boot] [PATCH V2] ARM: rpi: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Guillaume GARDET
      • [U-Boot] [PATCH V2] ARM: rpi: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support   Stephen Warren
• [U-Boot] [PATCH v1 1/1] lib/display_options: Fix print_freq   Suriyan Ramasami
  • [U-Boot] [PATCH v1 1/1] lib/display_options: Fix print_freq   Simon Glass
    • [U-Boot] [PATCH v1 1/1] lib/display_options: Fix print_freq   Heiko Schocher
      • [U-Boot] [PATCH v1 1/1] lib/display_options: Fix print_freq   Suriyan Ramasami
      • [U-Boot] [PATCH v1 1/1] lib/display_options: Fix print_freq   Heiko Schocher
      • [U-Boot] [PATCH v1 1/1] lib/display_options: Fix print_freq   Simon Glass
• [U-Boot] [PATCH] powerpc: convert selected boards to generic board structure   York Sun
• [U-Boot] [PATCH] net: e1000: Support 64-bit physical address   York Sun
  • [U-Boot] [PATCH] net: e1000: Support 64-bit physical address   Joe Hershberger
  • [U-Boot] [PATCH] net: e1000: Support 64-bit physical address   Joe Hershberger
    • [U-Boot] [PATCH] net: e1000: Support 64-bit physical address   Bin Meng
• [U-Boot] Question regarding CONFIG_DM_USB   Suriyan Ramasami
  • [U-Boot] Question regarding CONFIG_DM_USB   Simon Glass
• [U-Boot] [PATCH] ARM: at91: sama5d3xek: initialized a variable:ek_name in U-Boot   Josh Wu
  • [U-Boot] [PATCH] ARM: at91: sama5d3xek: initialized a variable:ek_name in U-Boot   Andreas Bießmann
• [U-Boot] [PATCH 1/3] ARM: at91: sama5: move the sd/mmc env config to at91-sama5_common.h   Josh Wu
  • [U-Boot] [PATCH 1/3] ARM: at91: sama5: move the sd/mmc env config to at91-sama5_common.h   Andreas Bießmann
    • [U-Boot] [PATCH 1/3] ARM: at91: sama5: move the sd/mmc env config to at91-sama5_common.h   Josh Wu
• [U-Boot] [PATCH v2 0/3] arm: Move all boards over to generic board   Simon Glass
  • [U-Boot] [PATCH v2 1/3] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Simon Glass
    • [U-Boot] [PATCH v2 1/3] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Masahiro Yamada
      • [U-Boot] [PATCH v2 1/3] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Simon Glass
      • [U-Boot] [PATCH v2 1/3] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Masahiro Yamada
      • [U-Boot] [PATCH v2 1/3] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Masahiro Yamada
    • [U-Boot] [PATCH v2 1/3] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Christian Riesch
      • [U-Boot] [PATCH v2 1/3] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Simon Glass
    • [U-Boot] [PATCH v2 1/3] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Igor Grinberg
      • [U-Boot] [PATCH v2 1/3] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Paul Kocialkowski
      • [U-Boot] [PATCH v2 1/3] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Evgeni Dobrev
    • [U-Boot] [PATCH v2 1/3] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Stefano Babic
    • [U-Boot] Antwort: [PATCH v2 1/3] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards   Hannes Schmelzer
• [U-Boot] [PATCH v2 2/3] arm: Drop old non-generic-board code   Simon Glass
  • [U-Boot] [PATCH v2 2/3] arm: Drop old non-generic-board code   Andreas Bießmann
• [U-Boot] [PATCH v2 3/3] buildman: Improve the config comparison feature   Simon Glass
  • [U-Boot] [PATCH v2 3/3] buildman: Improve the config comparison feature   Joe Hershberger
    • [U-Boot] [PATCH v2 3/3] buildman: Improve the config comparison feature   Simon Glass
• [U-Boot] [PATCH v6 4/6] net: e1000: Add Kconfig options   Simon Glass
  • [U-Boot] [PATCH v6 4/6] net: e1000: Add Kconfig options   Joe Hershberger
    • [U-Boot] [PATCH v6 4/6] net: e1000: Add Kconfig options   Simon Glass
• [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
  • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Pavel Machek
    • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
    • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
  • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
    • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Dinh Nguyen
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Dinh Nguyen
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Simon Glass
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Jaehoon Chung
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Jaehoon Chung
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Jaehoon Chung
      • [U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
• [U-Boot] [PATCH 2/2] arm: socfpga: config: Remove hard-coded drvsel and smpsel   Chin Liang See
  • [U-Boot] [PATCH 2/2] arm: socfpga: config: Remove hard-coded drvsel and smpsel   Marek Vasut
    • [U-Boot] [PATCH 2/2] arm: socfpga: config: Remove hard-coded drvsel and smpsel   Chin Liang See
      • [U-Boot] [PATCH 2/2] arm: socfpga: config: Remove hard-coded drvsel and smpsel   Marek Vasut
      • [U-Boot] [PATCH 2/2] arm: socfpga: config: Remove hard-coded drvsel and smpsel   Chin Liang See
      • [U-Boot] [PATCH 2/2] arm: socfpga: config: Remove hard-coded drvsel and smpsel   Marek Vasut
      • [U-Boot] [PATCH 2/2] arm: socfpga: config: Remove hard-coded drvsel and smpsel   Chin Liang See
      • [U-Boot] [PATCH 2/2] arm: socfpga: config: Remove hard-coded drvsel and smpsel   Marek Vasut
• [U-Boot] [PATCH 1/3] arm: socfpga: Fix SD/MMC boot on ArriaV SoCDK   Marek Vasut
  • [U-Boot] [PATCH 2/3] arm: socfpga: Enable ethernet on ArriaV SoCDK   Marek Vasut
• [U-Boot] [PATCH 3/3] arm: socfpga: Fix ArriaV SoCDK PLL config   Marek Vasut
• [U-Boot] [PATCH v2 0/5] ti: usb (dwc3) peripheral mode fixes   Kishon Vijay Abraham I
  • [U-Boot] [PATCH v2 1/5] usb: dwc3: dwc3-omap: Use the clear register inorder to clear the interrupts   Kishon Vijay Abraham I
  • [U-Boot] [PATCH v2 2/5] ARM: DRA7: Enable clocks for USB OTGSS2 and USB PHY2   Kishon Vijay Abraham I
  • [U-Boot] [PATCH v2 3/5] TI PHY: Add support to control 2nd USB PHY in DRA7xx/AM57xx   Kishon Vijay Abraham I
  • [U-Boot] [PATCH v2 4/5] board: ti: remove duplicate initialization of vbus_id_status   Kishon Vijay Abraham I
  • [U-Boot] [PATCH v2 5/5] include: configs: am43xx_evm: add 'usb stop' in usbboot env   Kishon Vijay Abraham I
• [U-Boot] [PATCH 1/3] arm: Add SYS_L2CACHE_OFF Kconfig entry   Peng Fan
  • [U-Boot] [PATCH 3/3] imx: mx6ul_14x14_evk discard MX6UL from CONFIG_SYS_EXTRA_OPTIONS   Peng Fan
• [U-Boot] [PATCH 2/3] imx: mx6ul_14x14_evk select MX6UL   Peng Fan
• [U-Boot] [PATCH v2 0/3] usb: host/gadget: Miscellaneous fixes   Kishon Vijay Abraham I
  • [U-Boot] [PATCH v2 1/3] usb: gadget: ether: Perform board initialization from ethernet gadget driver   Kishon Vijay Abraham I
  • [U-Boot] [PATCH v2 2/3] usb: host: xhci-omap: invoke board_usb_cleanup in xhci_hcd_stop   Kishon Vijay Abraham I
  • [U-Boot] [PATCH v2 3/3] usb: gadget: ether: populate _reset_ callback   Kishon Vijay Abraham I
  • [U-Boot] [PATCH v2 0/3] usb: host/gadget: Miscellaneous fixes   Marek Vasut
    • [U-Boot] [PATCH v2 0/3] usb: host/gadget: Miscellaneous fixes   Kishon Vijay Abraham I
      • [U-Boot] [PATCH v2 0/3] usb: host/gadget: Miscellaneous fixes   Marek Vasut
• [U-Boot] [PATCH] at91sam9rlek: add missing files to MAINTAINERS   Andreas Bießmann
  • [U-Boot] at91sam9rlek: add missing files to MAINTAINERS   Tom Rini
• [U-Boot] [PATCH] at91sam9260ek: add missing files to MAINTAINERS   Andreas Bießmann
  • [U-Boot] at91sam9260ek: add missing files to MAINTAINERS   Tom Rini
• [U-Boot] [PATCH 0/3] ti: add usb peripheral support for omap5 and beagle x15   Kishon Vijay Abraham I
  • [U-Boot] [PATCH 1/3] board: ti: beagle_x15: added USB initializtion code   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 1/3] board: ti: beagle_x15: added USB initializtion code   Tom Rini
    • [U-Boot] [U-Boot, 1/3] board: ti: beagle_x15: added USB initializtion code   Tom Rini
  • [U-Boot] [PATCH 2/3] board: ti: OMAP5: added USB initializtion code   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 2/3] board: ti: OMAP5: added USB initializtion code   Tom Rini
    • [U-Boot] [U-Boot, 2/3] board: ti: OMAP5: added USB initializtion code   Tom Rini
  • [U-Boot] [PATCH 3/3] include: configs: Enable DWC3 and DFU in ti_omap5_common   Kishon Vijay Abraham I
    • [U-Boot] [PATCH 3/3] include: configs: Enable DWC3 and DFU in ti_omap5_common   Tom Rini
      • [U-Boot] [PATCH 3/3] include: configs: Enable DWC3 and DFU in ti_omap5_common   Kishon Vijay Abraham I
      • [U-Boot] [PATCH 3/3] include: configs: Enable DWC3 and DFU in ti_omap5_common   Tom Rini
• [U-Boot] [GIT PULL] Zynq changes   Michal Simek
  • [U-Boot] [GIT PULL] Zynq changes   Tom Rini
• [U-Boot] [PATCH v2 0/4] ti: dwc3: Enable USB clocks on-demand   Kishon Vijay Abraham I
  • [U-Boot] [PATCH v2 1/4] ARM: OMAP5: Add functions to enable and disable USB clocks   Kishon Vijay Abraham I
    • [U-Boot] [PATCH v2 1/4] ARM: OMAP5: Add functions to enable and disable USB clocks   Tom Rini
    • [U-Boot] [U-Boot, v2, 1/4] ARM: OMAP5: Add functions to enable and disable USB clocks   Tom Rini
  • [U-Boot] [PATCH v2 2/4] ARM: AM43xx: Add functions to enable and disable USB clocks   Kishon Vijay Abraham I
    • [U-Boot] [PATCH v2 2/4] ARM: AM43xx: Add functions to enable and disable USB clocks   Tom Rini
    • [U-Boot] [U-Boot, v2, 2/4] ARM: AM43xx: Add functions to enable and disable USB clocks   Tom Rini
  • [U-Boot] [PATCH v2 3/4] board: ti: invoke clock API to enable and disable clocks   Kishon Vijay Abraham I
    • [U-Boot] [U-Boot, v2, 3/4] board: ti: invoke clock API to enable and disable clocks   Tom Rini
  • [U-Boot] [PATCH v2 4/4] ARM: OMAP5/AM43xx: remove enabling USB clocks from enable_basic_clocks()   Kishon Vijay Abraham I
    • [U-Boot] [PATCH v2 4/4] ARM: OMAP5/AM43xx: remove enabling USB clocks from enable_basic_clocks()   Tom Rini
    • [U-Boot] [U-Boot, v2, 4/4] ARM: OMAP5/AM43xx: remove enabling USB clocks from enable_basic_clocks()   Tom Rini
• [U-Boot] [PATCH v2 1/4] ARM: at91: sama5: move the sd/mmc env config to at91-sama5_common.h   Josh Wu
  • [U-Boot] [PATCH v2 2/4] ARM: at91: sama5d3xek: use a $dtb_name to load dtb   Josh Wu
    • [U-Boot] [U-Boot, v2, 2/4] ARM: at91: sama5d3xek: use a $dtb_name to load dtb   Andreas Bießmann
  • [U-Boot] [PATCH v2 3/4] ARM: at91: sama5: move the nandflash env config to at91-sama5_common.h   Josh Wu
    • [U-Boot] [U-Boot, v2, 3/4] ARM: at91: sama5: move the nandflash env config to at91-sama5_common.h   Andreas Bießmann
  • [U-Boot] [PATCH v2 4/4] ARM: at91: sama5: update the spi flash mapping   Josh Wu
    • [U-Boot] [U-Boot, v2, 4/4] ARM: at91: sama5: update the spi flash mapping   Andreas Bießmann
  • [U-Boot] [U-Boot, v2, 1/4] ARM: at91: sama5: move the sd/mmc env config to at91-sama5_common.h   Andreas Bießmann
• [U-Boot] [PATCH v3] ARM: tegra: Add Tegra20 SPI device nodes   Mirza Krak
• [U-Boot] [PATCH V2 2/2] ARM: tegra: Add p2371-0000 board   Thierry Reding
  • [U-Boot] [PATCH V2 2/2] ARM: tegra: Add p2371-0000 board   Stephen Warren
    • [U-Boot] [PATCH V2 2/2] ARM: tegra: Add p2371-0000 board   Stephen Warren
    • [U-Boot] [PATCH V2 2/2] ARM: tegra: Add p2371-0000 board   Stephen Warren
    • [U-Boot] [PATCH V2 2/2] ARM: tegra: Add p2371-0000 board   Thierry Reding
• [U-Boot] [PATCH v7 0/6] net: Move e1000 driver to driver model and Kconfig   Simon Glass
  • [U-Boot] [PATCH v7 4/6] net: e1000: Add Kconfig options   Simon Glass
    • [U-Boot] [PATCH v7 4/6] net: e1000: Add Kconfig options   Joe Hershberger
  • [U-Boot] [PATCH v7 5/6] Tidy up some defconfig files   Simon Glass
    • [U-Boot] [PATCH v7 5/6] Tidy up some defconfig files   Joe Hershberger
    • [U-Boot] [PATCH v7 5/6] Tidy up some defconfig files   Joe Hershberger
  • [U-Boot] [PATCH v7 6/6] net: Move CONFIG_E1000 options to Kconfig   Simon Glass
    • [U-Boot] [PATCH v7 6/6] net: Move CONFIG_E1000 options to Kconfig   Joe Hershberger
• [U-Boot] [PATCH v7 1/6] net: e1000: Move #include of common.h to the C files   Simon Glass
  • [U-Boot] [PATCH v7 1/6] net: e1000: Move #include of common.h to the C files   Joe Hershberger
• [U-Boot] [PATCH v7 2/6] net: e1000: Prepare for driver model conversion   Simon Glass
  • [U-Boot] [PATCH v7 2/6] net: e1000: Prepare for driver model conversion   Joe Hershberger
• [U-Boot] [PATCH v7 3/6] net: e1000: Convert to driver model   Simon Glass
  • [U-Boot] [PATCH v7 3/6] net: e1000: Convert to driver model   Joe Hershberger
• [U-Boot] [linux-sunxi] [PATCH] sunxi: Add support for the Olimex A20 EVB   codekipper at gmail.com
• [U-Boot] [PATCH 0/2] MIPS: add support to support usb stack for mips and minor cleanup   Govindraj Raja
  • [U-Boot] [PATCH 1/2] MIPS: add clrbits and setbits and add phy_to_bus support.   Govindraj Raja
    • [U-Boot] [PATCH 1/2] MIPS: add clrbits and setbits and add phy_to_bus support.   Daniel Schwierzeck
  • [U-Boot] [PATCH 2/2] MIPS: fix syntax for fdt_chosen/initrd.   Govindraj Raja
    • [U-Boot] [PATCH 2/2] MIPS: fix syntax for fdt_chosen/initrd.   Daniel Schwierzeck
• [U-Boot] 2TB disks   Stefan Monnier
  • [U-Boot] [PATCH] Don't wrap to negative after 2G sectors   Stefan Monnier
• [U-Boot] [PATCH] arm: socfpga: Fix MAINTAINERS entry for CV/AV SoCDK   Marek Vasut
  • [U-Boot] [PATCH] arm: socfpga: Fix MAINTAINERS entry for CV/AV SoCDK   Marek Vasut
    • [U-Boot] [PATCH] arm: socfpga: Fix MAINTAINERS entry for CV/AV SoCDK   Michal Simek
      • [U-Boot] [PATCH] arm: socfpga: Fix MAINTAINERS entry for CV/AV SoCDK   Marek Vasut
      • [U-Boot] [PATCH] arm: socfpga: Fix MAINTAINERS entry for CV/AV SoCDK   Michal Simek
      • [U-Boot] [PATCH] arm: socfpga: Fix MAINTAINERS entry for CV/AV SoCDK   Marek Vasut
• [U-Boot] Question on fitupd   Brian_Brelsford at Dell.com
  • [U-Boot] Question on fitupd   Simon Glass
    • [U-Boot] Question on fitupd   Lukasz Majewski
• [U-Boot] [PATCH] ARM: tegra: fix COUNTER_FREQUENCY for T210   Stephen Warren
• [U-Boot] [PATCH 1/2] arm: socfpga: Always enable OF_CONTROL and SPL_OF_CONTROL   Marek Vasut
• [U-Boot] [PATCH 2/2] arm: socfpga: Zap OF_CONTROL checks, it's always enabled   Marek Vasut
  • [U-Boot] [PATCH 2/2] arm: socfpga: Zap OF_CONTROL checks, it's always enabled   Marek Vasut
• [U-Boot] [PATCH] ARM: tegra: fix PLLP frequency calc on T210   Stephen Warren
• [U-Boot] [PATCH v2] ARM: davinci: remove support for cam_enc_4xx   Masahiro Yamada
  • [U-Boot] [PATCH v2] ARM: davinci: remove support for cam_enc_4xx   Tom Rini
• [U-Boot] ext4load and ls   Glen Cook
• [U-Boot] [PATCH v2 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
  • [U-Boot] [PATCH v2 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
    • [U-Boot] [PATCH v2 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
      • [U-Boot] [PATCH v2 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
      • [U-Boot] [PATCH v2 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
      • [U-Boot] [PATCH v2 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
      • [U-Boot] [PATCH v2 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Marek Vasut
  • [U-Boot] [PATCH v2 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Pavel Machek
    • [U-Boot] [PATCH v2 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel   Chin Liang See
• [U-Boot] [PATCH v2 2/2] arm: socfpga: config: Remove hard-coded drvsel and smpsel   Chin Liang See
  • [U-Boot] [PATCH v2 2/2] arm: socfpga: config: Remove hard-coded drvsel and smpsel   Chin Liang See
    • [U-Boot] [PATCH v2 2/2] arm: socfpga: config: Remove hard-coded drvsel and smpsel   Marek Vasut
• [U-Boot] [PATCH 0/3] arm: tegra20/colibri_t20: early pmic rail configuration   Marcel Ziswiler
  • [U-Boot] [PATCH 1/3] arm: tegra20: implement early pmic rail configuration   Marcel Ziswiler
    • [U-Boot] [PATCH 1/3] arm: tegra20: implement early pmic rail configuration   Stephen Warren
    • [U-Boot] [PATCH 1/3] arm: tegra20: implement early pmic rail configuration   Marcel Ziswiler
      • [U-Boot] [PATCH 1/3] arm: tegra20: implement early pmic rail configuration   Stephen Warren
  • [U-Boot] [PATCH 0/3] arm: tegra20/colibri_t20: early pmic rail configuration   Stephen Warren
  • [U-Boot] [PATCH 0/3] arm: tegra20/colibri_t20: early pmic rail configuration   Marcel Ziswiler
    • [U-Boot] [PATCH 0/3] arm: tegra20/colibri_t20: early pmic rail configuration   Stephen Warren
  • [U-Boot] [PATCH 0/3] arm: tegra20/colibri_t20: early pmic rail configuration   Marcel Ziswiler
• [U-Boot] [PATCH 2/3] colibri_t20: enable early pmic rail configuration   Marcel Ziswiler
  • [U-Boot] [PATCH 2/3] colibri_t20: enable early pmic rail configuration   Stephen Warren
  • [U-Boot] [PATCH 2/3] colibri_t20: enable early pmic rail configuration   Marcel Ziswiler
    • [U-Boot] [PATCH 2/3] colibri_t20: enable early pmic rail configuration   Stephen Warren
• [U-Boot] [PATCH 3/3] colibri_t20: get rid of spurious MAX_I2C_RETRY define   Marcel Ziswiler
• [U-Boot] [PATCH 1/6] armv8: Make COUNTER_FREQUENCY optional   Thierry Reding
  • [U-Boot] [PATCH 2/6] ARM: tegra: Implement clk_m   Thierry Reding
    • [U-Boot] [PATCH 2/6] ARM: tegra: Implement clk_m   Stephen Warren
      • [U-Boot] [PATCH 2/6] ARM: tegra: Implement clk_m   Tom Warren
      • [U-Boot] [PATCH 2/6] ARM: tegra: Implement clk_m   Tom Warren
  • [U-Boot] [PATCH 3/6] ARM: tegra: clk_m is the architected timer source clock   Thierry Reding
  • [U-Boot] [PATCH 4/6] e2220-1170: Remove hard-coded counter frequency   Thierry Reding
  • [U-Boot] [PATCH 5/6] p2371: Remove hard-coded counter frequency   Thierry Reding
    • [U-Boot] [PATCH 5/6] p2371: Remove hard-coded counter frequency   Stephen Warren
  • [U-Boot] [PATCH 6/6] p2571: Remove hard-coded counter frequency   Thierry Reding
  • [U-Boot] [PATCH 1/6] armv8: Make COUNTER_FREQUENCY optional   Stephen Warren
• [U-Boot] x86: EFI: boot fails at exit_boot_services - Was: Stuck trying to build a non-qemu EFI payload   Stoppa, Igor
  • [U-Boot] x86: EFI: boot fails at exit_boot_services - Was: Stuck trying to build a non-qemu EFI payload   Stoppa, Igor
    • [U-Boot] x86: EFI: boot fails at exit_boot_services - Was: Stuck trying to build a non-qemu EFI payload   Simon Glass
      • [U-Boot] x86: EFI: boot fails at exit_boot_services - Was: Stuck trying to build a non-qemu EFI payload   Stoppa, Igor
      • [U-Boot] x86: EFI: boot fails at exit_boot_services - Was: Stuck trying to build a non-qemu EFI payload   Simon Glass
• [U-Boot] [PATCH] image: Fix loop condition to avoid warning   Thierry Reding
  • [U-Boot] [PATCH] image: Fix loop condition to avoid warning   Tom Rini
  • [U-Boot] [PATCH] image: Fix loop condition to avoid warning   Simon Glass
  • [U-Boot] image: Fix loop condition to avoid warning   Tom Rini
• [U-Boot] [PATCH 1/3] armv8/mmu: Clean up TCR programming   Thierry Reding
  • [U-Boot] [PATCH 2/3] armv8/mmu: Set bits marked RES1 in TCR   Thierry Reding
  • [U-Boot] [PATCH 3/3] armv8/gic: Fix GIC v2 initialization   Thierry Reding
• [U-Boot] [PATCH 0/5] arm: tegra: apalis/colibri_t30: video: add display driver   Marcel Ziswiler
• [U-Boot] [PATCH 1/5] arm: tegra20: video: rename display header ifdef gating   Marcel Ziswiler
  • [U-Boot] [PATCH 1/5] arm: tegra20: video: rename display header ifdef gating   Simon Glass
• [U-Boot] [PATCH 2/5] arm: tegra20: video: ifdef gate hard-coded ugly Tegra20 pin muxing   Marcel Ziswiler
  • [U-Boot] [PATCH 2/5] arm: tegra20: video: ifdef gate hard-coded ugly Tegra20 pin muxing   Stephen Warren
  • [U-Boot] [PATCH 2/5] arm: tegra20: video: ifdef gate hard-coded ugly Tegra20 pin muxing   Marcel Ziswiler
• [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Marcel Ziswiler
  • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Stephen Warren
  • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Marcel Ziswiler
    • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Thierry Reding
      • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Simon Glass
      • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Thierry Reding
      • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Simon Glass
      • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Thierry Reding
      • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Simon Glass
      • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Thierry Reding
      • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Simon Glass
  • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Marcel Ziswiler
    • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Thierry Reding
      • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Simon Glass
  • [U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30   Marcel Ziswiler
• [U-Boot] [PATCH 4/5] colibri_t30: enable display driver   Marcel Ziswiler
  • [U-Boot] [PATCH 4/5] colibri_t30: enable display driver   Simon Glass
• [U-Boot] [PATCH 5/5] apalis_t30: enable display driver   Marcel Ziswiler
  • [U-Boot] [PATCH 5/5] apalis_t30: enable display driver   Simon Glass
• [U-Boot] [PATCH v2 00/12] x86: dm: pci: Support pci uart devices with driver model   Bin Meng
  • [U-Boot] [PATCH v2 01/12] dm: pci: Support selected device/driver binding before relocation   Bin Meng
    • [U-Boot] [PATCH v2 01/12] dm: pci: Support selected device/driver binding before relocation   Simon Glass
  • [U-Boot] [PATCH v2 03/12] x86: fsp: Enlarge the size of malloc() pool before relocation   Bin Meng
    • [U-Boot] [PATCH v2 03/12] x86: fsp: Enlarge the size of malloc() pool before relocation   Simon Glass
      • [U-Boot] [PATCH v2 03/12] x86: fsp: Enlarge the size of malloc() pool before relocation   Simon Glass
  • [U-Boot] [PATCH v2 04/12] x86: fsp: Add comments about U-Boot entering start.S twice   Bin Meng
    • [U-Boot] [PATCH v2 04/12] x86: fsp: Add comments about U-Boot entering start.S twice   Simon Glass
      • [U-Boot] [PATCH v2 04/12] x86: fsp: Add comments about U-Boot entering start.S twice   Simon Glass
  • [U-Boot] [PATCH v2 05/12] x86: queensbay: Move unprotect_spi_flash() to arch_misc_init()   Bin Meng
    • [U-Boot] [PATCH v2 05/12] x86: queensbay: Move unprotect_spi_flash() to arch_misc_init()   Simon Glass
      • [U-Boot] [PATCH v2 05/12] x86: queensbay: Move unprotect_spi_flash() to arch_misc_init()   Simon Glass
  • [U-Boot] [PATCH v2 06/12] x86: baytrail: Remove the fsp_init_phase_pci() call   Bin Meng
    • [U-Boot] [PATCH v2 06/12] x86: baytrail: Remove the fsp_init_phase_pci() call   Simon Glass
      • [U-Boot] [PATCH v2 06/12] x86: baytrail: Remove the fsp_init_phase_pci() call   Simon Glass
  • [U-Boot] [PATCH v2 08/12] dm: pci: Remove the unnecessary pci_bus_find_devfn() in pci_bind_bus_devices()   Bin Meng
    • [U-Boot] [PATCH v2 08/12] dm: pci: Remove the unnecessary pci_bus_find_devfn() in pci_bind_bus_devices()   Simon Glass
  • [U-Boot] [PATCH v2 11/12] dm: pci: Really support binding pci device in the device tree   Bin Meng
  • [U-Boot] [PATCH v2 12/12] dm: pci: Document binding of pci device drivers   Bin Meng
• [U-Boot] [PATCH v2 02/12] x86: fsp: Delay x86_fsp_init() call a little bit   Bin Meng
  • [U-Boot] [PATCH v2 02/12] x86: fsp: Delay x86_fsp_init() call a little bit   Simon Glass
• [U-Boot] [PATCH v2 07/12] x86: fsp: Call fsp_init_phase_pci() in pci_uclass_post_probe()   Bin Meng
  • [U-Boot] [PATCH v2 07/12] x86: fsp: Call fsp_init_phase_pci() in pci_uclass_post_probe()   Simon Glass
    • [U-Boot] [PATCH v2 07/12] x86: fsp: Call fsp_init_phase_pci() in pci_uclass_post_probe()   Bin Meng
      • [U-Boot] [PATCH v2 07/12] x86: fsp: Call fsp_init_phase_pci() in pci_uclass_post_probe()   Simon Glass
• [U-Boot] [PATCH v2 09/12] fdtdec: Fix possible infinite loop in fdtdec_get_pci_vendev()   Bin Meng
  • [U-Boot] [PATCH v2 09/12] fdtdec: Fix possible infinite loop in fdtdec_get_pci_vendev()   Simon Glass
    • [U-Boot] [PATCH v2 09/12] fdtdec: Fix possible infinite loop in fdtdec_get_pci_vendev()   Simon Glass
• [U-Boot] [PATCH v2 10/12] dm: pci: Save devfn without bus number in pci_uclass_child_post_bind()   Bin Meng
  • [U-Boot] [PATCH v2 10/12] dm: pci: Save devfn without bus number in pci_uclass_child_post_bind()   Simon Glass
    • [U-Boot] [PATCH v2 10/12] dm: pci: Save devfn without bus number in pci_uclass_child_post_bind()   Simon Glass
• [U-Boot] [PATCH v2 1/2] MIPS: add clrbits and setbits and add phy_to_bus support.   Govindraj Raja
  • [U-Boot] [PATCH v2 1/2] MIPS: add clrbits and setbits and add phy_to_bus support.   Daniel Schwierzeck
    • [U-Boot] [PATCH v2 1/2] MIPS: add clrbits and setbits and add phy_to_bus support.   Govindraj Raja
• [U-Boot] [PATCH 1/3] sysboot: Add support for ubifs to the sysboot command   Hans de Goede
  • [U-Boot] [PATCH 2/3] ubifs: Add a ubifsexists command   Hans de Goede
  • [U-Boot] [PATCH 3/3] distro_bootcmd: Add support for booting from ubifs   Hans de Goede
  • [U-Boot] [PATCH 1/3] sysboot: Add support for ubifs to the sysboot command   Stephen Warren
  • [U-Boot] [U-Boot, 1/3] sysboot: Add support for ubifs to the sysboot command   Hans de Goede
    • [U-Boot] [U-Boot, 1/3] sysboot: Add support for ubifs to the sysboot command   Stephen Warren
      • [U-Boot] [U-Boot, 1/3] sysboot: Add support for ubifs to the sysboot command   Hans de Goede
• [U-Boot] [PATCH 0/4] arm: rmobile: Stout board support and minor fixes   Vladimir Barinov
  • [U-Boot] [PATCH 0/4] arm: rmobile: Stout board support and minor fixes   Nobuhiro Iwamatsu
• [U-Boot] [PATCH] ARM: cpu: Add ARMv7 barrier operations support   Vladimir Barinov
• [U-Boot] [PATCH] usb: ehci: remember init mode   Stephen Warren
  • [U-Boot] [PATCH] usb: ehci: remember init mode   Marek Vasut
    • [U-Boot] [PATCH] usb: ehci: remember init mode   Stephen Warren
      • [U-Boot] [PATCH] usb: ehci: remember init mode   Marek Vasut
      • [U-Boot] [PATCH] usb: ehci: remember init mode   Stephen Warren
      • [U-Boot] [PATCH] usb: ehci: remember init mode   Marek Vasut
• [U-Boot] [PATCH] ARM: tegra: replace V_PROMPT define with kconfig   Stephen Warren
• [U-Boot] [PATCH] h2200: Fix build error   Kishon Vijay Abraham I
  • [U-Boot] [PATCH] h2200: Fix build error   Marek Vasut
    • [U-Boot] [PATCH] h2200: Fix build error   Kishon Vijay Abraham I
      • [U-Boot] [PATCH] h2200: Fix build error   Marek Vasut
      • [U-Boot] [PATCH] h2200: Fix build error   Kishon Vijay Abraham I
  • [U-Boot] [PATCH] h2200: Fix build error   Marek Vasut
• [U-Boot] [PATCH 1/3] drivers: kconfig: Move "Generic Driver Options" menu to the top   Bin Meng
  • [U-Boot] [PATCH 2/3] drivers: kconfig: Move PHYS_TO_BUS to "Device Drivers" menu   Bin Meng
    • [U-Boot] [PATCH 2/3] drivers: kconfig: Move PHYS_TO_BUS to "Device Drivers" menu   Simon Glass
      • [U-Boot] [PATCH 2/3] drivers: kconfig: Move PHYS_TO_BUS to "Device Drivers" menu   Simon Glass
  • [U-Boot] [PATCH 3/3] drivers: kconfig: Sort driver menu in alphabetical order   Bin Meng
    • [U-Boot] [PATCH 3/3] drivers: kconfig: Sort driver menu in alphabetical order   Simon Glass
      • [U-Boot] [PATCH 3/3] drivers: kconfig: Sort driver menu in alphabetical order   Simon Glass
  • [U-Boot] [PATCH 1/3] drivers: kconfig: Move "Generic Driver Options" menu to the top   Simon Glass
    • [U-Boot] [PATCH 1/3] drivers: kconfig: Move "Generic Driver Options" menu to the top   Simon Glass
• [U-Boot] [PATCH v2] net: Return -EINTR when ctrl+c is pressed   Michal Simek
  • [U-Boot] [PATCH v2] net: Return -EINTR when ctrl+c is pressed   Joe Hershberger
    • [U-Boot] [PATCH v2] net: Return -EINTR when ctrl+c is pressed   Michal Simek
  • [U-Boot] [PATCH v2] net: Return -EINTR when ctrl+c is pressed   Joe Hershberger
• [U-Boot] [PATCH v2 1/7] x86: superio: Add keyboard controller support to smsc_lpc47m driver   Bin Meng
  • [U-Boot] [PATCH v2 3/7] x86: i8042: Reorder static functions   Bin Meng
  • [U-Boot] [PATCH v2 4/7] x86: i8042: Clean up the driver per coding convention   Bin Meng
  • [U-Boot] [PATCH v2 5/7] x86: i8042: Correctly initialize the controller   Bin Meng
    • [U-Boot] [PATCH v2 5/7] x86: i8042: Correctly initialize the controller   Simon Glass
      • [U-Boot] [PATCH v2 5/7] x86: i8042: Correctly initialize the controller   Bin Meng
      • [U-Boot] [PATCH v2 5/7] x86: i8042: Correctly initialize the controller   Simon Glass
  • [U-Boot] [PATCH v2 6/7] video: cfb_console: Allow VGA device to work without i8042 keyboard   Bin Meng
  • [U-Boot] [PATCH v2 7/7] x86: crownbay: Enable on-board SMSC superio keyboard controller   Bin Meng
  • [U-Boot] [PATCH v2 1/7] x86: superio: Add keyboard controller support to smsc_lpc47m driver   Simon Glass
    • [U-Boot] [PATCH v2 1/7] x86: superio: Add keyboard controller support to smsc_lpc47m driver   Simon Glass
• [U-Boot] [PATCH v2 2/7] x86: i8042: Remove unused codes   Bin Meng
  • [U-Boot] [PATCH v2 2/7] x86: i8042: Remove unused codes   Simon Glass
    • [U-Boot] [PATCH v2 2/7] x86: i8042: Remove unused codes   Bin Meng
      • [U-Boot] [PATCH v2 2/7] x86: i8042: Remove unused codes   Simon Glass
• [U-Boot] [PATCH] powerpc/t1023rdb: change default core frequency to 1200MHz   Shengzhou Liu
• [U-Boot] [PATCH v3 0/2] arm, at91: add DFU support for the corvus board   Heiko Schocher
  • [U-Boot] [PATCH v3 1/2] at91: corvus: board updates   Heiko Schocher
  • [U-Boot] [PATCH v3 2/2] corvus, dfu: add dfu support   Heiko Schocher
• [U-Boot] Kernel bootparam injection   Christian Litjes
• [U-Boot] Adding new command using existing commands   Ajanta Sarma
• [U-Boot] [PATCH 0/2] GPIO LED improvements (resend)   Bernhard Nortmann
• [U-Boot] [PATCH 1/2] add generic stubs for GPIO LEDs   Bernhard Nortmann
  • [U-Boot] [PATCH 1/2] add generic stubs for GPIO LEDs   Simon Glass
    • [U-Boot] [PATCH 1/2] add generic stubs for GPIO LEDs   Bernhard Nortmann
      • [U-Boot] [PATCH 1/2] add generic stubs for GPIO LEDs   Tom Rini
• [U-Boot] [PATCH 2/2] allow LED initialization without STATUS_LED_BOOT   Bernhard Nortmann
• [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master   Andreas Bießmann
  • [U-Boot] [PULL] u-boot-atmel/master -> u-boot/master   Andreas Bießmann
    • [U-Boot] [PULL v2] u-boot-atmel/master -> u-boot/master   Andreas Bießmann
      • [U-Boot] [PULL v2] u-boot-atmel/master -> u-boot/master   Tom Rini
• [U-Boot] 2015.10-rc2 Chromebook Snow boot failure   Misha Komarovskiy
  • [U-Boot] 2015.10-rc2 Chromebook Snow boot failure   Simon Glass
    • [U-Boot] 2015.10-rc2 Chromebook Snow boot failure   Misha Komarovskiy
      • [U-Boot] 2015.10-rc2 Chromebook Snow boot failure   Misha Komarovskiy
      • [U-Boot] 2015.10-rc2 Chromebook Snow boot failure   Simon Glass
      • [U-Boot] 2015.10-rc2 Chromebook Snow boot failure   Misha Komarovskiy
      • [U-Boot] 2015.10-rc2 Chromebook Snow boot failure   Simon Glass
• [U-Boot] [PATCH v3] arm, at91: add axm extensions   Heiko Schocher
• [U-Boot] [PATCH v3] taurus: board updates   Heiko Schocher
• [U-Boot] [PATCH v4 0/4] add dfu support for at91 sam9260 based boards   Heiko Schocher
  • [U-Boot] [PATCH v4 1/4] bitops: introduce BIT() definition   Heiko Schocher
    • [U-Boot] [PATCH v4 1/4] bitops: introduce BIT() definition   Michael Heimpold
      • [U-Boot] [PATCH v4 1/4] bitops: introduce BIT() definition   Marek Vasut
  • [U-Boot] [PATCH v4 2/4] usb: gadget: at91_udc: port linux driver at91_udc   Heiko Schocher
  • [U-Boot] [PATCH v4 3/4] usb: gadget: at91_udc: add at91_udc into U-Boot   Heiko Schocher
  • [U-Boot] [PATCH v4 4/4] at91, taurus, smartweb: add dfu support   Heiko Schocher
• [U-Boot] [RFC PATCH 0/3] fix netconsole for CONFIG_DM_ETH   Bernhard Nortmann
• [U-Boot] [RFC PATCH 1/3] expose eth_is_active() function to test network device state   Bernhard Nortmann
  • [U-Boot] [RFC PATCH 1/3] expose eth_is_active() function to test network device state   Simon Glass
    • [U-Boot] [RFC PATCH 1/3] expose eth_is_active() function to test network device state   Bernhard Nortmann
      • [U-Boot] [RFC PATCH 1/3] expose eth_is_active() function to test network device state   Simon Glass
      • [U-Boot] [RFC PATCH 1/3] expose eth_is_active() function to test network device state   Joe Hershberger
      • [U-Boot] [RFC PATCH 1/3] expose eth_is_active() function to test network device state   Bernhard Nortmann
      • [U-Boot] [RFC PATCH 1/3] expose eth_is_active() function to test network device state   Joe Hershberger
      • [U-Boot] [RFC PATCH 1/3] expose eth_is_active() function to test network device state   Bernhard Nortmann
      • [U-Boot] [RFC PATCH 1/3] expose eth_is_active() function to test network device state   Joe Hershberger
• [U-Boot] [RFC PATCH 2/3] fix netconsole when CONFIG_DM_ETH is set   Bernhard Nortmann
• [U-Boot] [RFC PATCH 3/3] avoid eth_unregister() call when function is unavailable   Bernhard Nortmann
  • [U-Boot] [RFC PATCH 3/3] avoid eth_unregister() call when function is unavailable   Simon Glass
• [U-Boot] [UBOOT PATCH v6 0/3] Add ACPI table support   Saket Sinha
  • [U-Boot] [UBOOT PATCH v6 1/3] x86: Generate a valid ACPI table   Saket Sinha
    • [U-Boot] [UBOOT PATCH v6 1/3] x86: Generate a valid ACPI table   Bin Meng
    • [U-Boot] [UBOOT PATCH v6 1/3] x86: Generate a valid ACPI table   Simon Glass
  • [U-Boot] [UBOOT PATCH v6 2/3] x86: Add ACPI table support to QEMU   Saket Sinha
    • [U-Boot] [UBOOT PATCH v6 2/3] x86: Add ACPI table support to QEMU   Bin Meng
      • [U-Boot] [UBOOT PATCH v6 2/3] x86: Add ACPI table support to QEMU   Saket Sinha
      • [U-Boot] [UBOOT PATCH v6 2/3] x86: Add ACPI table support to QEMU   Bin Meng
      • [U-Boot] [UBOOT PATCH v6 2/3] x86: Add ACPI table support to QEMU   Saket Sinha
    • [U-Boot] [UBOOT PATCH v6 2/3] x86: Add ACPI table support to QEMU   Simon Glass
  • [U-Boot] [UBOOT PATCH v6 3/3] x86: Add DSDT table for supporting ACPI on QEMU   Saket Sinha
    • [U-Boot] [UBOOT PATCH v6 3/3] x86: Add DSDT table for supporting ACPI on QEMU   Bin Meng
    • [U-Boot] [UBOOT PATCH v6 3/3] x86: Add DSDT table for supporting ACPI on QEMU   Simon Glass
• [U-Boot] [PATCH] rpi: set fdt_addr_r to 0x00000100 to match default device_tree_address   Jonathan Liu
  • [U-Boot] rpi: set fdt_addr_r to 0x00000100 to match default device_tree_address   Tom Rini
• [U-Boot] [RFC PATCH 0/1] sunxi board-specific options   Bernhard Nortmann
  • [U-Boot] [RFC PATCH] sunxi: support board-specific configuration options   Bernhard Nortmann
    • [U-Boot] [RFC PATCH] sunxi: support board-specific configuration options   Hans de Goede
      • [U-Boot] [RFC PATCH] sunxi: support board-specific configuration options   Bernhard Nortmann
      • [U-Boot] [RFC PATCH] sunxi: support board-specific configuration options   Hans de Goede
• [U-Boot] [PATCH v2 0/4] distro_bootcmd: Add support for booting from ubifs   Hans de Goede
  • [U-Boot] [PATCH v2 1/4] ubifs: Modify ubifs u-boot wrapper function prototypes for generic fs use   Hans de Goede
    • [U-Boot] [PATCH v2 1/4] ubifs: Modify ubifs u-boot wrapper function prototypes for generic fs use   Heiko Schocher
      • [U-Boot] [PATCH v2 1/4] ubifs: Modify ubifs u-boot wrapper function prototypes for generic fs use   Hans de Goede
      • [U-Boot] [PATCH v2 1/4] ubifs: Modify ubifs u-boot wrapper function prototypes for generic fs use   Tom Rini
      • [U-Boot] [PATCH v2 1/4] ubifs: Modify ubifs u-boot wrapper function prototypes for generic fs use   Heiko Schocher
      • [U-Boot] [PATCH v2 1/4] ubifs: Modify ubifs u-boot wrapper function prototypes for generic fs use   Hans de Goede
  • [U-Boot] [PATCH v2 2/4] ubifs: Add functions for generic fs use   Hans de Goede
    • [U-Boot] [PATCH v2 2/4] ubifs: Add functions for generic fs use   Heiko Schocher
  • [U-Boot] [PATCH v2 3/4] ubifs: Add generic fs support   Hans de Goede
    • [U-Boot] [PATCH v2 3/4] ubifs: Add generic fs support   Heiko Schocher
  • [U-Boot] [PATCH v2 4/4] distro_bootcmd: Add support for booting from ubifs   Hans de Goede
  • [U-Boot] [PATCH v2 0/4] distro_bootcmd: Add support for booting from ubifs   Scott Wood
    • [U-Boot] [PATCH v2 0/4] distro_bootcmd: Add support for booting from ubifs   Hans de Goede
      • [U-Boot] [PATCH v2 0/4] distro_bootcmd: Add support for booting from ubifs   Heiko Schocher
• [U-Boot] [PATCH 1/4] sunxi_nand_spl: Rename SPL_NAND_SUNXI to NAND_SUNXI   Hans de Goede
  • [U-Boot] [PATCH 3/4] mtd: nand: Make CONFIG_SYS_NAND_U_BOOT_OFFS configurable through Kconfig   Hans de Goede
    • [U-Boot] [PATCH 3/4] mtd: nand: Make CONFIG_SYS_NAND_U_BOOT_OFFS configurable through Kconfig   Ian Campbell
      • [U-Boot] [PATCH 3/4] mtd: nand: Make CONFIG_SYS_NAND_U_BOOT_OFFS configurable through Kconfig   Scott Wood
      • [U-Boot] [PATCH 3/4] mtd: nand: Make CONFIG_SYS_NAND_U_BOOT_OFFS configurable through Kconfig   Hans de Goede
  • [U-Boot] [PATCH 4/4] sunxi: Add inet97fv2_defconfig   Hans de Goede
    • [U-Boot] [PATCH 4/4] sunxi: Add inet97fv2_defconfig   Ian Campbell
      • [U-Boot] [PATCH 4/4] sunxi: Add inet97fv2_defconfig   Hans de Goede
      • [U-Boot] [PATCH 4/4] sunxi: Add inet97fv2_defconfig   Ian Campbell
  • [U-Boot] [PATCH 1/4] sunxi_nand_spl: Rename SPL_NAND_SUNXI to NAND_SUNXI   Ian Campbell
• [U-Boot] [PATCH 2/4] sunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END   Hans de Goede
  • [U-Boot] [PATCH 2/4] sunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END   Scott Wood
    • [U-Boot] [PATCH 2/4] sunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END   Hans de Goede
      • [U-Boot] [PATCH 2/4] sunxi_nand_spl: Remove NAND_SUNXI_SPL_SYNDROME_PARTITIONS_END   Ian Campbell
• [U-Boot] [PATCH v2 0/9] x86: gpio: Tidy up GPIO driver   Simon Glass
  • [U-Boot] [PATCH v2 1/9] x86: minnowmax: Add access to GPIOs E0, E1, E2   Simon Glass
    • [U-Boot] [PATCH v2 1/9] x86: minnowmax: Add access to GPIOs E0, E1, E2   Simon Glass
  • [U-Boot] [PATCH v2 2/9] dm: pci: Allow a PCI bus to be found without an alias   Simon Glass
    • [U-Boot] [PATCH v2 2/9] dm: pci: Allow a PCI bus to be found without an alias   Bin Meng
  • [U-Boot] [PATCH v2 3/9] dm: pci: Add a comment to help find pci_hose_read_config_byte, etc.   Simon Glass
    • [U-Boot] [PATCH v2 3/9] dm: pci: Add a comment to help find pci_hose_read_config_byte, etc.   Simon Glass
  • [U-Boot] [PATCH v2 4/9] x86: minnowmax: Correct pad-offset value for host_en1   Simon Glass
    • [U-Boot] [PATCH v2 4/9] x86: minnowmax: Correct pad-offset value for host_en1   Simon Glass
  • [U-Boot] [PATCH v2 5/9] gpio: Report errors when GPIOs cannot be read   Simon Glass
  • [U-Boot] [PATCH v2 6/9] x86: gpio: Correct calls to _ich6_gpio_set_direction()   Simon Glass
    • [U-Boot] [PATCH v2 6/9] x86: gpio: Correct calls to _ich6_gpio_set_direction()   Simon Glass
  • [U-Boot] [PATCH v2 7/9] x86: gpio: Tidy up gpio_ich6_get_base() and callers   Simon Glass
    • [U-Boot] [PATCH v2 7/9] x86: gpio: Tidy up gpio_ich6_get_base() and callers   Simon Glass
  • [U-Boot] [PATCH v2 8/9] WIP: x86: gpio: Handle the case where reading a GPIO fails   Simon Glass
  • [U-Boot] [PATCH v2 9/9] WIP: x86: gpio: Make sure that output GPIOs can be read   Simon Glass
• [U-Boot] [PATCH] buildman: Correct 'Series-cover-cc' detection logic   Simon Glass
  • [U-Boot] [PATCH] buildman: Correct 'Series-cover-cc' detection logic   Simon Glass
• [U-Boot] [PATCH v2 00/28] dm: Convert TPM drivers to driver model   Simon Glass
  • [U-Boot] [PATCH v2 01/28] tpm: Remove old pre-driver-model I2C code   Simon Glass
    • [U-Boot] [PATCH v2 01/28] tpm: Remove old pre-driver-model I2C code   Heiko Schocher
      • [U-Boot] [PATCH v2 01/28] tpm: Remove old pre-driver-model I2C code   Simon Glass
      • [U-Boot] [PATCH v2 01/28] tpm: Remove old pre-driver-model I2C code   Heiko Schocher
      • [U-Boot] [PATCH v2 01/28] tpm: Remove old pre-driver-model I2C code   Simon Glass
  • [U-Boot] [PATCH v2 02/28] tpm: Drop two unused options   Simon Glass
    • [U-Boot] [PATCH v2 02/28] tpm: Drop two unused options   Simon Glass
  • [U-Boot] [PATCH v2 03/28] tpm: Add Kconfig options for TPMs   Simon Glass
    • [U-Boot] [PATCH v2 03/28] tpm: Add Kconfig options for TPMs   Christophe Ricard
      • [U-Boot] [PATCH v2 03/28] tpm: Add Kconfig options for TPMs   Simon Glass
  • [U-Boot] [PATCH v2 04/28] tpm: Convert board config TPM options to Kconfig   Simon Glass
    • [U-Boot] [PATCH v2 04/28] tpm: Convert board config TPM options to Kconfig   Christophe Ricard
      • [U-Boot] [PATCH v2 04/28] tpm: Convert board config TPM options to Kconfig   Simon Glass
  • [U-Boot] [PATCH v2 05/28] tpm: Convert drivers to use SPDX   Simon Glass
    • [U-Boot] [PATCH v2 05/28] tpm: Convert drivers to use SPDX   Simon Glass
  • [U-Boot] [PATCH v2 06/28] tpm: Move the I2C TPM code into one file   Simon Glass
    • [U-Boot] [PATCH v2 06/28] tpm: Move the I2C TPM code into one file   Christophe Ricard
      • [U-Boot] [PATCH v2 06/28] tpm: Move the I2C TPM code into one file   Simon Glass
      • [U-Boot] [PATCH v2 06/28] tpm: Move the I2C TPM code into one file   Christophe Ricard
      • [U-Boot] [PATCH v2 06/28] tpm: Move the I2C TPM code into one file   Simon Glass
  • [U-Boot] [PATCH v2 07/28] tpm: tpm_tis_i2c: Drop unnecessary methods   Simon Glass
    • [U-Boot] [PATCH v2 07/28] tpm: tpm_tis_i2c: Drop unnecessary methods   Simon Glass
  • [U-Boot] [PATCH v2 08/28] tpm: tpm_tis_i2c: Drop struct tpm_vendor_specific   Simon Glass
    • [U-Boot] [PATCH v2 08/28] tpm: tpm_tis_i2c: Drop struct tpm_vendor_specific   Simon Glass
  • [U-Boot] [PATCH v2 09/28] tpm: tpm_tis_i2c: Merge struct tpm_dev into tpm_chip   Simon Glass
    • [U-Boot] [PATCH v2 09/28] tpm: tpm_tis_i2c: Merge struct tpm_dev into tpm_chip   Simon Glass
  • [U-Boot] [PATCH v2 10/28] tpm: tpm_tis_i2c: Merge struct tpm into tpm_chip   Simon Glass
    • [U-Boot] [PATCH v2 10/28] tpm: tpm_tis_i2c: Merge struct tpm into tpm_chip   Simon Glass
  • [U-Boot] [PATCH v2 11/28] tpm: tpm_tis_i2c: Move definitions into the header file   Simon Glass
    • [U-Boot] [PATCH v2 11/28] tpm: tpm_tis_i2c: Move definitions into the header file   Simon Glass
  • [U-Boot] [PATCH v2 12/28] tpm: tpm_tis_i2c: Simplify init code   Simon Glass
    • [U-Boot] [PATCH v2 12/28] tpm: tpm_tis_i2c: Simplify init code   Christophe Ricard
      • [U-Boot] [PATCH v2 12/28] tpm: tpm_tis_i2c: Simplify init code   Simon Glass
  • [U-Boot] [PATCH v2 13/28] tpm: tpm_tis_i2c: Use a consistent tpm_tis_i2c_ prefix   Simon Glass
    • [U-Boot] [PATCH v2 13/28] tpm: tpm_tis_i2c: Use a consistent tpm_tis_i2c_ prefix   Simon Glass
  • [U-Boot] [PATCH v2 14/28] tpm: tpm_tis_i2c: Tidy up delays   Simon Glass
    • [U-Boot] [PATCH v2 14/28] tpm: tpm_tis_i2c: Tidy up delays   Simon Glass
  • [U-Boot] [PATCH v2 15/28] dm: tpm: Add a uclass for Trusted Platform Modules   Simon Glass
    • [U-Boot] [PATCH v2 15/28] dm: tpm: Add a uclass for Trusted Platform Modules   Christophe Ricard
      • [U-Boot] [PATCH v2 15/28] dm: tpm: Add a uclass for Trusted Platform Modules   Simon Glass
  • [U-Boot] [PATCH v2 16/28] dm: tpm: Convert the TPM command and library to driver model   Simon Glass
    • [U-Boot] [PATCH v2 16/28] dm: tpm: Convert the TPM command and library to driver model   Christophe Ricard
      • [U-Boot] [PATCH v2 16/28] dm: tpm: Convert the TPM command and library to driver model   Simon Glass
  • [U-Boot] [PATCH v2 17/28] dm: i2c: Add a command to adjust the offset length   Simon Glass
    • [U-Boot] [PATCH v2 17/28] dm: i2c: Add a command to adjust the offset length   Christophe Ricard
      • [U-Boot] [PATCH v2 17/28] dm: i2c: Add a command to adjust the offset length   Simon Glass
  • [U-Boot] [PATCH v2 18/28] tpm: Report tpm errors on the command line   Simon Glass
    • [U-Boot] [PATCH v2 18/28] tpm: Report tpm errors on the command line   Christophe Ricard
      • [U-Boot] [PATCH v2 18/28] tpm: Report tpm errors on the command line   Simon Glass
  • [U-Boot] [PATCH v2 19/28] dm: tpm: sandbox: Convert TPM driver to driver model   Simon Glass
    • [U-Boot] [PATCH v2 19/28] dm: tpm: sandbox: Convert TPM driver to driver model   Simon Glass
  • [U-Boot] [PATCH v2 20/28] tpm: Check that parse_byte_string() has data to parse   Simon Glass
    • [U-Boot] [PATCH v2 20/28] tpm: Check that parse_byte_string() has data to parse   Christophe Ricard
      • [U-Boot] [PATCH v2 20/28] tpm: Check that parse_byte_string() has data to parse   Simon Glass
      • [U-Boot] [PATCH v2 20/28] tpm: Check that parse_byte_string() has data to parse   Christophe Ricard
      • [U-Boot] [PATCH v2 20/28] tpm: Check that parse_byte_string() has data to parse   Simon Glass
  • [U-Boot] [PATCH v2 21/28] exynos: x86: dts: Add tpm nodes to the device tree for Chrome OS devices   Simon Glass
    • [U-Boot] [PATCH v2 21/28] exynos: x86: dts: Add tpm nodes to the device tree for Chrome OS devices   Christophe Ricard
      • [U-Boot] [PATCH v2 21/28] exynos: x86: dts: Add tpm nodes to the device tree for Chrome OS devices   Simon Glass
  • [U-Boot] [PATCH v2 22/28] dm: tpm: Convert I2C driver to driver model   Simon Glass
    • [U-Boot] [PATCH v2 22/28] dm: tpm: Convert I2C driver to driver model   Christophe Ricard
      • [U-Boot] [PATCH v2 22/28] dm: tpm: Convert I2C driver to driver model   Simon Glass
  • [U-Boot] [PATCH v2 23/28] dm: tpm: Convert LPC driver to driver model   Simon Glass
    • [U-Boot] [PATCH v2 23/28] dm: tpm: Convert LPC driver to driver model   Christophe Ricard
      • [U-Boot] [PATCH v2 23/28] dm: tpm: Convert LPC driver to driver model   Simon Glass
  • [U-Boot] [PATCH v2 24/28] tpm: Add a 'tpm info' command   Simon Glass
    • [U-Boot] [PATCH v2 24/28] tpm: Add a 'tpm info' command   Simon Glass
  • [U-Boot] [PATCH v2 25/28] tpm: Add functions to access flags and permissions   Simon Glass
    • [U-Boot] [PATCH v2 25/28] tpm: Add functions to access flags and permissions   Christophe Ricard
      • [U-Boot] [PATCH v2 25/28] tpm: Add functions to access flags and permissions   Simon Glass
  • [U-Boot] [PATCH v2 26/28] dm: tpm: Add a 'tpmtest' command   Simon Glass
    • [U-Boot] [PATCH v2 26/28] dm: tpm: Add a 'tpmtest' command   Christophe Ricard
      • [U-Boot] [PATCH v2 26/28] dm: tpm: Add a 'tpmtest' command   Simon Glass
  • [U-Boot] [PATCH v2 27/28] tpm: Enable 'tpmtest' command for Chrome OS boards with TPMs   Simon Glass
    • [U-Boot] [PATCH v2 27/28] tpm: Enable 'tpmtest' command for Chrome OS boards with TPMs   Christophe Ricard
      • [U-Boot] [PATCH v2 27/28] tpm: Enable 'tpmtest' command for Chrome OS boards with TPMs   Simon Glass
  • [U-Boot] [PATCH v2 28/28] tegra: nyan: Enable TPM command and driver   Simon Glass
    • [U-Boot] [PATCH v2 28/28] tegra: nyan: Enable TPM command and driver   Simon Glass
  • [U-Boot] [PATCH v2 00/28] dm: Convert TPM drivers to driver model   Christophe Ricard
    • [U-Boot] [PATCH v2 00/28] dm: Convert TPM drivers to driver model   Simon Glass
• [U-Boot] [PATCH v3 0/4] dm: pci: Support pci devices in the device tree with driver model   Bin Meng
  • [U-Boot] [PATCH v3 1/4] dm: pci: Optimize pci_uclass_post_bind()   Bin Meng
    • [U-Boot] [PATCH v3 1/4] dm: pci: Optimize pci_uclass_post_bind()   Bin Meng
  • [U-Boot] [PATCH v3 2/4] dm: core: Test dev->flags after device_probe() in device_probe_child()   Bin Meng
    • [U-Boot] [PATCH v3 2/4] dm: core: Test dev->flags after device_probe() in device_probe_child()   Simon Glass
      • [U-Boot] [PATCH v3 2/4] dm: core: Test dev->flags after device_probe() in device_probe_child()   Bin Meng
  • [U-Boot] [PATCH v3 3/4] x86: crownbay: Support Topcliff integrated pci uart devices with driver model   Bin Meng
    • [U-Boot] [PATCH v3 3/4] x86: crownbay: Support Topcliff integrated pci uart devices with driver model   Simon Glass
  • [U-Boot] [PATCH v3 4/4] dm: pci: Document binding of pci device drivers   Bin Meng
    • [U-Boot] [PATCH v3 4/4] dm: pci: Document binding of pci device drivers   Simon Glass
• [U-Boot] [RESPIN PATCH v3 1/4] dm: pci: Optimize pci_uclass_post_bind()   Bin Meng
  • [U-Boot] [RESPIN PATCH v3 1/4] dm: pci: Optimize pci_uclass_post_bind()   Simon Glass
• [U-Boot] [PATCH] drivers: MMC: initialize MMC devices using the device model   Simon Glass
  • [U-Boot] [PATCH] drivers: MMC: initialize MMC devices using the device model   Sjoerd Simons
• [U-Boot] [PATCH v4 0/9] dfu: tftp: update: Support for DFU upgrades via ETH (TFTP)   Lukasz Majewski
  • [U-Boot] [PATCH v4 0/9] dfu: tftp: update: Support for DFU upgrades via ETH (TFTP)   Joe Hershberger
    • [U-Boot] [PATCH v4 0/9] dfu: tftp: update: Support for DFU upgrades via ETH (TFTP)   Lukasz Majewski
    • [U-Boot] [PATCH v4 0/9] dfu: tftp: update: Support for DFU upgrades via ETH (TFTP)   Lukasz Majewski
      • [U-Boot] [PATCH v4 0/9] dfu: tftp: update: Support for DFU upgrades via ETH (TFTP)   Joe Hershberger
• [U-Boot] [PATCH v4 1/9] doc: dfu: tftp: README entry for TFTP extension of DFU   Lukasz Majewski
• [U-Boot] [PATCH v4 2/9] net: tftp: Move tftp.h file from ./net to ./include/net   Lukasz Majewski
• [U-Boot] [PATCH v4 3/9] tftp: update: Allow some parts of the code to be reused when CONFIG_SYS_NO_FLASH is set   Lukasz Majewski
• [U-Boot] [PATCH v4 4/9] dfu: tftp: update: Provide tftp support for the DFU subsystem   Lukasz Majewski
• [U-Boot] [PATCH v4 5/9] dfu: tftp: update: Add dfu_write_from_mem_addr() function   Lukasz Majewski
• [U-Boot] [PATCH v4 6/9] update: tftp: dfu: Extend update_tftp() function to support DFU   Lukasz Majewski
• [U-Boot] [PATCH v4 7/9] dfu: command: Extend "dfu" command to handle receiving data via TFTP   Lukasz Majewski
• [U-Boot] [PATCH v4 8/9] dfu: tftp: Kconfig: Add Kconfig entry for dfu tftp feature   Lukasz Majewski
• [U-Boot] [PATCH v4 9/9] dfu: tftp: Kconfig: Enable DFU_TFTP support on the am335x_boneblack_defconfig   Lukasz Majewski
  • [U-Boot] [PATCH v4 9/9] dfu: tftp: Kconfig: Enable DFU_TFTP support on the am335x_boneblack_defconfig   Joe Hershberger
• [U-Boot] [PATCH] x86: panther: Add PCI and video configuration   Simon Glass
  • [U-Boot] [PATCH] x86: panther: Add PCI and video configuration   Bin Meng
• [U-Boot] [PATCH 0/2] NDS32: Generic Board Support and Unsupport   kunhuahuang
  • [U-Boot] [PATCH 1/2] NDS32: Generic Board Support and Unsupport   kunhuahuang
    • [U-Boot] [U-Boot, 1/2] NDS32: Generic Board Support and Unsupport   Tom Rini
  • [U-Boot] [PATCH 2/2] NDS32: Generic Board Support and Unsupport   kunhuahuang
    • [U-Boot] [U-Boot, 2/2] NDS32: Generic Board Support and Unsupport   Tom Rini
• [U-Boot] armv7 DMA and cache mangement functions   Markus Niebel
  • [U-Boot] armv7 DMA and cache mangement functions   Markus Niebel
  • [U-Boot] armv7 DMA and cache mangement functions   Mark Rutland
    • [U-Boot] armv7 DMA and cache mangement functions   Markus Niebel
• [U-Boot] [PATCH v3 1/7] x86: i8042: Remove unused codes   Bin Meng
  • [U-Boot] [PATCH v3 2/7] x86: i8042: Reorder static functions   Bin Meng
    • [U-Boot] [PATCH v3 2/7] x86: i8042: Reorder static functions   Simon Glass
  • [U-Boot] [PATCH v3 3/7] x86: i8042: Clean up the driver per coding convention   Bin Meng
    • [U-Boot] [PATCH v3 3/7] x86: i8042: Clean up the driver per coding convention   Simon Glass
  • [U-Boot] [PATCH v3 4/7] x86: i8042: Correctly initialize the controller   Bin Meng
    • [U-Boot] [PATCH v3 4/7] x86: i8042: Correctly initialize the controller   Simon Glass
  • [U-Boot] [PATCH v3 5/7] video: cfb_console: Allow VGA device to work without i8042 keyboard   Bin Meng
    • [U-Boot] [PATCH v3 5/7] video: cfb_console: Allow VGA device to work without i8042 keyboard   Simon Glass
      • [U-Boot] [PATCH v3 5/7] video: cfb_console: Allow VGA device to work without i8042 keyboard   Anatolij Gustschin
      • [U-Boot] [PATCH v3 5/7] video: cfb_console: Allow VGA device to work without i8042 keyboard   Simon Glass
    • [U-Boot] [PATCH v3 5/7] video: cfb_console: Allow VGA device to work without i8042 keyboard   Anatolij Gustschin
  • [U-Boot] [PATCH v3 6/7] x86: crownbay: Enable on-board SMSC superio keyboard controller   Bin Meng
    • [U-Boot] [PATCH v3 6/7] x86: crownbay: Enable on-board SMSC superio keyboard controller   Simon Glass
  • [U-Boot] [PATCH v3 7/7] video: ct69000: Remove unused codes   Bin Meng
    • [U-Boot] [PATCH v3 7/7] video: ct69000: Remove unused codes   Simon Glass
    • [U-Boot] [PATCH v3 7/7] video: ct69000: Remove unused codes   Anatolij Gustschin
      • [U-Boot] [PATCH v3 7/7] video: ct69000: Remove unused codes   Simon Glass
  • [U-Boot] [PATCH v3 1/7] x86: i8042: Remove unused codes   Simon Glass
    • [U-Boot] [PATCH v3 1/7] x86: i8042: Remove unused codes   Simon Glass
• [U-Boot] [PATCH v4 0/4] dm: pci: Support pci devices in the device tree with driver model   Bin Meng
  • [U-Boot] [PATCH v4 2/4] dm: core: Fix code reentrancy issue in device_probe_child()   Bin Meng
    • [U-Boot] [PATCH v4 2/4] dm: core: Fix code reentrancy issue in device_probe_child()   Simon Glass
      • [U-Boot] [PATCH v4 2/4] dm: core: Fix code reentrancy issue in device_probe_child()   Simon Glass
  • [U-Boot] [PATCH v4 3/4] x86: crownbay: Support Topcliff integrated pci uart devices with driver model   Bin Meng
    • [U-Boot] [PATCH v4 3/4] x86: crownbay: Support Topcliff integrated pci uart devices with driver model   Simon Glass
  • [U-Boot] [PATCH v4 4/4] dm: pci: Document binding of pci device drivers   Bin Meng
    • [U-Boot] [PATCH v4 4/4] dm: pci: Document binding of pci device drivers   Simon Glass
• [U-Boot] [PATCH v4 1/4] dm: pci: Optimize pci_uclass_post_bind()   Bin Meng
  • [U-Boot] [PATCH v4 1/4] dm: pci: Optimize pci_uclass_post_bind()   Simon Glass
• [U-Boot] [PATCH] arm: mvebu: Fix internal register config on A38x   Stefan Roese
• [U-Boot] [PATCH 1/3][v2] Pointers in ESBC header made 32 bit   Aneesh Bansal
  • [U-Boot] [PATCH 1/3][v2] Pointers in ESBC header made 32 bit   Aneesh Bansal
• [U-Boot] [PATCH 2/3][v2] Data types defined for 64 bit physical address   Aneesh Bansal
• [U-Boot] [PATCH 3/3][v2] crypto/fsl: SEC driver cleanup for 64 bit and endianness   Aneesh Bansal
• [U-Boot] [PATCH v2 1/2] video, lg4573: make spi bus and cs configurable   Heiko Schocher
  • [U-Boot] [PATCH v2 2/2] arm, imx6: add aristainetos 2b board version   Heiko Schocher
    • [U-Boot] [PATCH v2 2/2] arm, imx6: add aristainetos 2b board version   Stefano Babic
  • [U-Boot] [PATCH v2 1/2] video, lg4573: make spi bus and cs configurable   Anatolij Gustschin
  • [U-Boot] [PATCH v2 1/2] video, lg4573: make spi bus and cs configurable   Stefano Babic
• [U-Boot] [PATCH] mxc: ocotp fix hole in shadow registers   Peng Fan
• [U-Boot] [PATCH] arm: socfpga: Assure ISWGRP 0 and 1 are inited   Marek Vasut
  • [U-Boot] [PATCH] arm: socfpga: Assure ISWGRP 0 and 1 are inited   Marek Vasut
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
  • [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
    • [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [GIT] Pull request: u-boot-dfu   Lukasz Majewski
  • [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
  • [U-Boot] [GIT] Pull request: u-boot-dfu   Lukasz Majewski
    • [U-Boot] [GIT] Pull request: u-boot-dfu   Marek Vasut
• [U-Boot] [PATCH v4 00/33] dm: Introduce Rockchip RK3288 support   Simon Glass
  • [U-Boot] [PATCH v4 01/33] pinctrl: Correct build errors in the pinctrl_simple   Simon Glass
    • [U-Boot] [PATCH v4 01/33] pinctrl: Correct build errors in the pinctrl_simple   Simon Glass
      • [U-Boot] [PATCH v4 01/33] pinctrl: Correct build errors in the pinctrl_simple   Masahiro Yamada
  • [U-Boot] [PATCH v4 02/33] pinctrl: Add help text to Kconfig   Simon Glass
  • [U-Boot] [PATCH v4 03/33] pinctrl: Add the concept of peripheral IDs   Simon Glass
    • [U-Boot] [PATCH v4 03/33] pinctrl: Add the concept of peripheral IDs   Masahiro Yamada
      • [U-Boot] [PATCH v4 03/33] pinctrl: Add the concept of peripheral IDs   Simon Glass
      • [U-Boot] [PATCH v4 03/33] pinctrl: Add the concept of peripheral IDs   Masahiro Yamada
      • [U-Boot] [PATCH v4 03/33] pinctrl: Add the concept of peripheral IDs   Simon Glass
      • [U-Boot] [PATCH v4 03/33] pinctrl: Add the concept of peripheral IDs   Masahiro Yamada
      • [U-Boot] [PATCH v4 03/33] pinctrl: Add the concept of peripheral IDs   Simon Glass
  • [U-Boot] [PATCH v4 04/33] mmc: Support bypass mode with the get_mmc_clk() method   Simon Glass
    • [U-Boot] [PATCH v4 04/33] mmc: Support bypass mode with the get_mmc_clk() method   Jaehoon Chung
  • [U-Boot] [PATCH v4 05/33] dm: do not return pointer if NULL is given to devp of device_bind()   Simon Glass
  • [U-Boot] [PATCH v4 06/33] dm: Improve handling of a missing uclass   Simon Glass
  • [U-Boot] [PATCH v4 07/33] dm: Provide better debugging when a device fails to bind   Simon Glass
  • [U-Boot] [PATCH v4 08/33] arm: reset: Avoid a build error when the reset uclass is enabled   Simon Glass
  • [U-Boot] [PATCH v4 09/33] rockchip: Add serial support   Simon Glass
  • [U-Boot] [PATCH v4 10/33] rockchip: Bring in RK3288 device tree file includes and bindings   Simon Glass
  • [U-Boot] [PATCH v4 11/33] rockchip: rk3288: dts: Make core devices available early   Simon Glass
  • [U-Boot] [PATCH v4 12/33] mkimage: Allow padding to any length   Simon Glass
    • [U-Boot] [PATCH v4 12/33] mkimage: Allow padding to any length   Joe Hershberger
  • [U-Boot] [PATCH v4 13/33] mkimage: Allow the original file size to be recorded   Simon Glass
    • [U-Boot] [PATCH v4 13/33] mkimage: Allow the original file size to be recorded   Joe Hershberger
  • [U-Boot] [PATCH v4 14/33] rockchip: Add the rkimage format to mkimage   Simon Glass
  • [U-Boot] [PATCH v4 15/33] rockchip: Add support for the SD image   Simon Glass
  • [U-Boot] [PATCH v4 16/33] rockchip: Add support for the SPI image   Simon Glass
  • [U-Boot] [PATCH v4 17/33] rockchip: gpio: Add rockchip GPIO driver   Simon Glass
  • [U-Boot] [PATCH v4 18/33] rockchip: Add basic peripheral and clock definitions   Simon Glass
  • [U-Boot] [PATCH v4 19/33] power: Add support for ACT8846 PMIC   Simon Glass
  • [U-Boot] [PATCH v4 20/33] power: regulator: Add a driver for ACT8846 regulators   Simon Glass
  • [U-Boot] [PATCH v4 21/33] rockchip: rk3288: Add clock driver   Simon Glass
  • [U-Boot] [PATCH v4 22/33] rockchip: rk3288: Add header files for PMU and GRF   Simon Glass
  • [U-Boot] [PATCH v4 23/33] rockchip: rk3288: Add SoC reset driver   Simon Glass
  • [U-Boot] [PATCH v4 24/33] rockchip: rk3288: Add a simple syscon driver   Simon Glass
  • [U-Boot] [PATCH v4 25/33] rockchip: rk3288: Add pinctrl driver   Simon Glass
  • [U-Boot] [PATCH v4 26/33] rockchip: rk3288: Add SDRAM init   Simon Glass
  • [U-Boot] [PATCH v4 27/33] rockchip: Add an MMC driver   Simon Glass
    • [U-Boot] [PATCH v4 27/33] rockchip: Add an MMC driver   Jaehoon Chung
      • [U-Boot] [PATCH v4 27/33] rockchip: Add an MMC driver   Simon Glass
    • [U-Boot] [PATCH v4 27/33] rockchip: Add an MMC driver   Andre Przywara
      • [U-Boot] [PATCH v4 27/33] rockchip: Add an MMC driver   Simon Glass
  • [U-Boot] [PATCH v4 28/33] rockchip: Add core SoC start-up code   Simon Glass
  • [U-Boot] [PATCH v4 29/33] rockchip: Add I2C driver   Simon Glass
  • [U-Boot] [PATCH v4 30/33] rockchip: Add SPI driver   Simon Glass
    • [U-Boot] [PATCH v4 30/33] rockchip: Add SPI driver   Jagan Teki
      • [U-Boot] [PATCH v4 30/33] rockchip: Add SPI driver   Simon Glass
  • [U-Boot] [PATCH v4 31/33] rockchip: Add basic support for firefly-rk3288   Simon Glass
  • [U-Boot] [PATCH v4 32/33] rockchip: Add basic support for jerry   Simon Glass
  • [U-Boot] [PATCH v4 33/33] rockchip: Add a simple README   Simon Glass
  • [U-Boot] [PATCH v4 00/33] dm: Introduce Rockchip RK3288 support   Simon Glass
  • [U-Boot] [PATCH v4 00/33] dm: Introduce Rockchip RK3288 support   Sjoerd Simons
    • [U-Boot] [PATCH v4 00/33] dm: Introduce Rockchip RK3288 support   Simon Glass
• [U-Boot] [GIT PULL v2] u-boot-mips/master   Daniel Schwierzeck
  • [U-Boot] [GIT PULL v2] u-boot-mips/master   Tom Rini
• [U-Boot] [PATCH] arc: make AXS101 default platform   Alexey Brodkin
  • [U-Boot] [PATCH] arc: make AXS101 default platform   Tom Rini
    • [U-Boot] [PATCH] arc: make AXS101 default platform   Alexey Brodkin
      • [U-Boot] [PATCH] arc: make AXS101 default platform   Tom Rini
• [U-Boot] [PATCH 0/5] sbc8641d: misc fixes and generic board enablement   Paul Gortmaker
  • [U-Boot] [PATCH 4/5] sbc8641d: add basic flash setup instructions to README file   Paul Gortmaker
• [U-Boot] [PATCH 1/5] sbc8641d: enable command line editing   Paul Gortmaker
• [U-Boot] [PATCH 2/5] sbc8641d: increase malloc pool size to a sane default   Paul Gortmaker
• [U-Boot] [PATCH 3/5] sbc8641d: set proper environment sector size.   Paul Gortmaker
• [U-Boot] [PATCH 5/5] sbc8641d: enable and test CONFIG_SYS_GENERIC_BOARD   Paul Gortmaker
• [U-Boot] [PATCH 0/3] drivers/sandbox: Introduce a simplified remoteproc framework   Nishanth Menon
  • [U-Boot] [PATCH 1/3] drivers: Introduce a simplified remoteproc framework   Nishanth Menon
    • [U-Boot] [PATCH 1/3] drivers: Introduce a simplified remoteproc framework   Simon Glass
      • [U-Boot] [PATCH 1/3] drivers: Introduce a simplified remoteproc framework   Nishanth Menon
      • [U-Boot] [PATCH 1/3] drivers: Introduce a simplified remoteproc framework   Simon Glass
      • [U-Boot] [PATCH 1/3] drivers: Introduce a simplified remoteproc framework   Simon Glass
      • [U-Boot] [PATCH 1/3] drivers: Introduce a simplified remoteproc framework   Nishanth Menon
  • [U-Boot] [PATCH 2/3] remoteproc: Introduce a sandbox dummy driver   Nishanth Menon
    • [U-Boot] [PATCH 2/3] remoteproc: Introduce a sandbox dummy driver   Simon Glass
      • [U-Boot] [PATCH 2/3] remoteproc: Introduce a sandbox dummy driver   Nishanth Menon
  • [U-Boot] [PATCH 3/3] sandbox: Introduce dummy remoteproc nodes   Nishanth Menon
    • [U-Boot] [PATCH 3/3] sandbox: Introduce dummy remoteproc nodes   Simon Glass
      • [U-Boot] [PATCH 3/3] sandbox: Introduce dummy remoteproc nodes   Nishanth Menon
  • [U-Boot] [PATCH 0/3] drivers/sandbox: Introduce a simplified remoteproc framework   Simon Glass
    • [U-Boot] [PATCH 0/3] drivers/sandbox: Introduce a simplified remoteproc framework   Nishanth Menon
• [U-Boot] [PATCH 0/4] ARM: keystone: Add support for TI power processor   Nishanth Menon
  • [U-Boot] [PATCH 1/4] ARM: keystone: psc: redo doc in kernel-doc format   Nishanth Menon
  • [U-Boot] [PATCH 2/4] ARM: keystone: psc-defs: use adequate () for macros   Nishanth Menon
  • [U-Boot] [PATCH 3/4] ARM: keystone: psc: introduce function to hold and release module in reset.   Nishanth Menon
  • [U-Boot] [PATCH 4/4] remoteproc: Add support for TI power processor   Nishanth Menon
• [U-Boot] [PULL] u-boot-pxa/master   Marek Vasut
  • [U-Boot] [PULL] u-boot-pxa/master   Tom Rini
• [U-Boot] [sunxi][nand][legal]   Daniel at theia.denx.de
  • [U-Boot] [sunxi][nand][legal]   Tom Rini
• [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Bin Meng
  • [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Joe Hershberger
    • [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Bin Meng
      • [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Joe Hershberger
      • [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Bin Meng
      • [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Hannes Schmelzer
      • [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Pavel Machek
      • [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Hannes Schmelzer
  • [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Pavel Machek
    • [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Bin Meng
      • [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Bin Meng
      • [U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)   Pavel Machek
      • [U-Boot] [PATCH] Change default tftp timeout to be rfc-compliant   Pavel Machek
      • [U-Boot] [PATCH] Change default tftp timeout to be rfc-compliant   Bin Meng
      • [U-Boot] [PATCH] Change default tftp timeout to be rfc-compliant   Pavel Machek
      • [U-Boot] [PATCH] Change default tftp timeout to be rfc-compliant   Tom Rini
      • [U-Boot] [PATCH] Change default tftp timeout to be rfc-compliant   Pavel Machek
• [U-Boot] [PATCH] sunxi: Enable non-secure access to RTC on sun6i (A31s)   Chen-Yu Tsai
  • [U-Boot] [PATCH] sunxi: Enable non-secure access to RTC on sun6i (A31s)   Marc Zyngier
  • [U-Boot] [PATCH] sunxi: Enable non-secure access to RTC on sun6i (A31s)   Chen-Yu Tsai
    • [U-Boot] [PATCH] sunxi: Enable non-secure access to RTC on sun6i (A31s)   Hans de Goede
    • [U-Boot] [PATCH] sunxi: Enable non-secure access to RTC on sun6i (A31s)   Marc Zyngier
  • [U-Boot] [PATCH] sunxi: Enable non-secure access to RTC on sun6i (A31s)   Hans de Goede
• [U-Boot] [PATCH v4 0/3] add pinctrl driver framework   Masahiro Yamada
• [U-Boot] [PATCH v4 1/3] dm: core: allow device_bind() to not return a device pointer   Masahiro Yamada
  • [U-Boot] [PATCH v4 1/3] dm: core: allow device_bind() to not return a device pointer   Simon Glass
• [U-Boot] [PATCH v4 2/3] pinctrl: add pin control uclass support   Masahiro Yamada
  • [U-Boot] [PATCH v4 2/3] pinctrl: add pin control uclass support   Simon Glass
• [U-Boot] [PATCH v4 3/3] pinctrl: sandbox: add sandbox pinctrl driver   Masahiro Yamada
  • [U-Boot] [PATCH v4 3/3] pinctrl: sandbox: add sandbox pinctrl driver   Simon Glass
• [U-Boot] [PATCH v2 1/1] lib/display_options: Fix print_freq   Suriyan Ramasami
  • [U-Boot] [PATCH v2 1/1] lib/display_options: Fix print_freq   Heiko Schocher
  • [U-Boot] [PATCH v2 1/1] lib/display_options: Fix print_freq   Joe Hershberger
  • [U-Boot] [U-Boot,v2,1/1] lib/display_options: Fix print_freq   Tom Rini
• [U-Boot] [PATCH 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Bin Meng
  • [U-Boot] [PATCH 2/9] net: e1000: Fix build warnings for 32-bit   Bin Meng
    • [U-Boot] [PATCH 2/9] net: e1000: Fix build warnings for 32-bit   Scott Wood
  • [U-Boot] [PATCH 3/9] dm: eth: Do not call board_eth_init() or cpu_eth_init()   Bin Meng
    • [U-Boot] [PATCH 3/9] dm: eth: Do not call board_eth_init() or cpu_eth_init()   Joe Hershberger
      • [U-Boot] [PATCH 3/9] dm: eth: Do not call board_eth_init() or cpu_eth_init()   Bin Meng
      • [U-Boot] [PATCH 3/9] dm: eth: Do not call board_eth_init() or cpu_eth_init()   Bin Meng
      • [U-Boot] [PATCH 3/9] dm: eth: Do not call board_eth_init() or cpu_eth_init()   Joe Hershberger
      • [U-Boot] [PATCH 3/9] dm: eth: Do not call board_eth_init() or cpu_eth_init()   Bin Meng
      • [U-Boot] [PATCH 3/9] dm: eth: Do not call board_eth_init() or cpu_eth_init()   Joe Hershberger
      • [U-Boot] [PATCH 3/9] dm: eth: Do not call board_eth_init() or cpu_eth_init()   Simon Glass
  • [U-Boot] [PATCH 4/9] dm: eth: Correctly detect alias in eth_get_dev_by_name()   Bin Meng
    • [U-Boot] [PATCH 4/9] dm: eth: Correctly detect alias in eth_get_dev_by_name()   Joe Hershberger
  • [U-Boot] [PATCH 5/9] x86: crownbay: Convert to use CONFIG_DM_USB   Bin Meng
    • [U-Boot] [PATCH 5/9] x86: crownbay: Convert to use CONFIG_DM_USB   Joe Hershberger
    • [U-Boot] [PATCH 5/9] x86: crownbay: Convert to use CONFIG_DM_USB   Simon Glass
  • [U-Boot] [PATCH 6/9] x86: crownbay: Convert to use CONFIG_DM_ETH for E1000   Bin Meng
    • [U-Boot] [PATCH 6/9] x86: crownbay: Convert to use CONFIG_DM_ETH for E1000   Joe Hershberger
      • [U-Boot] [PATCH 6/9] x86: crownbay: Convert to use CONFIG_DM_ETH for E1000   Bin Meng
      • [U-Boot] [PATCH 6/9] x86: crownbay: Convert to use CONFIG_DM_ETH for E1000   Simon Glass
      • [U-Boot] [PATCH 6/9] x86: crownbay: Convert to use CONFIG_DM_ETH for E1000   Joe Hershberger
  • [U-Boot] [PATCH 7/9] net: pch_gbe: Convert to driver model   Bin Meng
    • [U-Boot] [PATCH 7/9] net: pch_gbe: Convert to driver model   Joe Hershberger
    • [U-Boot] [PATCH 7/9] net: pch_gbe: Convert to driver model   Simon Glass
  • [U-Boot] [PATCH 8/9] net: pch_gbe: Add Kconfig option   Bin Meng
    • [U-Boot] [PATCH 8/9] net: pch_gbe: Add Kconfig option   Joe Hershberger
      • [U-Boot] [PATCH 8/9] net: pch_gbe: Add Kconfig option   Bin Meng
      • [U-Boot] [PATCH 8/9] net: pch_gbe: Add Kconfig option   Joe Hershberger
  • [U-Boot] [PATCH 9/9] x86: crownbay: Enable CONFIG_PCH_GBE   Bin Meng
    • [U-Boot] [PATCH 9/9] x86: crownbay: Enable CONFIG_PCH_GBE   Joe Hershberger
    • [U-Boot] [PATCH 9/9] x86: crownbay: Enable CONFIG_PCH_GBE   Simon Glass
  • [U-Boot] [PATCH 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Bin Meng
    • [U-Boot] [PATCH 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Joe Hershberger
• [U-Boot] [PATCH] picosam9g45: adopt CONFIG_SYS_PROMPT   Andreas Bießmann
  • [U-Boot] picosam9g45: adopt CONFIG_SYS_PROMPT   Tom Rini
• [U-Boot] [PATCH] powerpc/t4240qds: add support of reading Core voltage   shh.xie at gmail.com
• [U-Boot] [U-Boot, v5, 5/8] omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot   Schmelzer Hannes
  • [U-Boot] [U-Boot, v5, 5/8] omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot   Paul Kocialkowski
    • [U-Boot] [U-Boot, v5, 5/8] omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot   Hannes Schmelzer
      • [U-Boot] [U-Boot, v5, 5/8] omap-common: SYS_BOOT-based fallback boot device selection for peripheral boot   Paul Kocialkowski
• [U-Boot] [U-Boot, v2] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH   Andreas Bießmann
  • [U-Boot] [Reproducible-builds] [U-Boot, v2] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH   Vagrant Cascadian
    • [U-Boot] [Reproducible-builds] [U-Boot, v2] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH   Andreas Bießmann
      • [U-Boot] [Reproducible-builds] [U-Boot, v2] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH   Paul Kocialkowski
    • [U-Boot] SOURCE_DATE_EPOCH must not be linux only... (was Re: [Reproducible-builds] [U-Boot, v2] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH)   Holger Levsen
  • [U-Boot] [U-Boot, v2] Reproducible U-Boot build support, using SOURCE_DATE_EPOCH   Fabio Estevam
  • [U-Boot] [RFC PATCH] Makefile: search for GNU date   Andreas Bießmann
    • [U-Boot] [RFC PATCH] Makefile: search for GNU date   Marek Vasut
      • [U-Boot] [RFC PATCH] Makefile: search for GNU date   Andreas Bießmann
      • [U-Boot] [RFC PATCH] Makefile: search for GNU date   Marek Vasut
    • [U-Boot] [RFC PATCH] Makefile: search for GNU date   Paul Kocialkowski
      • [U-Boot] [RFC PATCH] Makefile: search for GNU date   Andreas Bießmann
    • [U-Boot] [RFC PATCH v2] Makefile: search for GNU date   Andreas Bießmann
      • [U-Boot] [RFC PATCH v2] Makefile: search for GNU date   Paul Kocialkowski
      • [U-Boot] [RFC PATCH v2] Makefile: search for GNU date   Andreas Bießmann
      • [U-Boot] [RFC PATCH v2] Makefile: search for GNU date   Paul Kocialkowski
      • [U-Boot] [PATCH v3] Makefile: fix SOURCE_DATE_EPOCH for *BSD host   Andreas Bießmann
      • [U-Boot] [U-Boot, v3] Makefile: fix SOURCE_DATE_EPOCH for *BSD host   Tom Rini
      • [U-Boot] [U-Boot, v3] Makefile: fix SOURCE_DATE_EPOCH for *BSD host   Holger Levsen
• [U-Boot] [PATCH] exynos: Rise ARM voltage to 1.1V for chained bootloaders   Misha Komarovskiy
  • [U-Boot] [PATCH] exynos: Rise ARM voltage to 1.1V for chained bootloaders   Simon Glass
    • [U-Boot] [PATCH] exynos: Rise ARM voltage to 1.1V for chained bootloaders   Simon Glass
• [U-Boot] [PATCH] net: bootp fix vci string on SPL-Boot   Hannes Schmelzer
  • [U-Boot] [PATCH] net: bootp fix vci string on SPL-Boot   Joe Hershberger
  • [U-Boot] [PATCH] net: bootp fix vci string on SPL-Boot   Tom Rini
• [U-Boot] [PATCH] board/BuR: simplify default IP-setup on B&R boards.   Hannes Schmelzer
  • [U-Boot] [PATCH] board/BuR: simplify default IP-setup on B&R boards.   Tom Rini
  • [U-Boot] [PATCH] board/BuR: simplify default IP-setup on B&R boards.   Joe Hershberger
• [U-Boot] [PATCH 1/2] sunxi: Ampe_A76_defconfig: Add otg id pin configuration   Hans de Goede
  • [U-Boot] [PATCH 2/2] sunxi: Add inet98v_rev2 defconfig and dts file   Hans de Goede
    • [U-Boot] [PATCH 2/2] sunxi: Add inet98v_rev2 defconfig and dts file   Ian Campbell
  • [U-Boot] [PATCH 1/2] sunxi: Ampe_A76_defconfig: Add otg id pin configuration   Ian Campbell
• [U-Boot] [PATCH 1/3] arm: mvebu: Move Armada XP/38x Kconfig to mach specific Kconfig file   Stefan Roese
  • [U-Boot] [PATCH 2/3] arm: mvebu: Add option to use UART xmodem protocol via kwboot   Stefan Roese
    • [U-Boot] [PATCH 2/3] arm: mvebu: Add option to use UART xmodem protocol via kwboot   Kevin Smith
• [U-Boot] [PATCH 3/3] arm: mvebu: Only set CONFIG_SKIP_LOWLEVEL_INIT for SPL   Stefan Roese
• [U-Boot] [PATCH] net: protect status led access in bootp   Thomas Chou
  • [U-Boot] [PATCH] net: protect status led access in bootp   Joe Hershberger
• [U-Boot] [PATCH] MIPS: add atomic operations support.   Govindraj Raja
• [U-Boot] [PATCH] Fix bad return value checks (detected with Coccinelle)   Thomas Huth
  • [U-Boot] [PATCH] Fix bad return value checks (detected with Coccinelle)   Thomas Huth
  • [U-Boot] [PATCH] Fix bad return value checks (detected with Coccinelle)   Fabio Estevam
• [U-Boot] [PATCH] omap-common: SYS_BOOT fallback logic correction   Paul Kocialkowski
  • [U-Boot] [PATCH] omap-common: SYS_BOOT fallback logic correction   Tom Rini
  • [U-Boot] [PATCH] omap-common: SYS_BOOT fallback logic correction   Hannes Schmelzer
    • [U-Boot] [PATCH] omap-common: SYS_BOOT fallback logic correction   Paul Kocialkowski
      • [U-Boot] [PATCH] omap-common: SYS_BOOT fallback logic correction   Tom Rini
      • [U-Boot] [PATCH] omap-common: SYS_BOOT fallback logic correction   Paul Kocialkowski
      • [U-Boot] [PATCH] omap-common: SYS_BOOT fallback logic correction   Tom Rini
      • [U-Boot] [PATCH] omap-common: SYS_BOOT fallback logic correction   Hannes Schmelzer
    • [U-Boot] [PATCH] omap-common: SYS_BOOT fallback logic correction   Paul Kocialkowski
• [U-Boot] [PATCH] thermal: imx_thermal: rework driver to be reused   Adrian Alonso
  • [U-Boot] [PATCH] thermal: imx_thermal: rework driver to be reused   Stefano Babic
    • [U-Boot] [PATCH] thermal: imx_thermal: rework driver to be reused   Alonso Adrian
• [U-Boot] DWMMC crontroller in Exynos4412   Humberto López León
  • [U-Boot] DWMMC crontroller in Exynos4412   Simon Glass
    • [U-Boot] DWMMC crontroller in Exynos4412   Jaehoon Chung
      • [U-Boot] DWMMC crontroller in Exynos4412   Przemyslaw Marczak
      • [U-Boot] DWMMC crontroller in Exynos4412   Humberto López León
      • [U-Boot] DWMMC crontroller in Exynos4412   Przemyslaw Marczak
      • [U-Boot] DWMMC crontroller in Exynos4412   Humberto López León
      • [U-Boot] DWMMC crontroller in Exynos4412   Przemyslaw Marczak
• [U-Boot] [PATCH v4 0/5] spi: cadence_qspi: optimize & fix indirect rd-writes   Vikas Manocha
  • [U-Boot] [PATCH v4 1/5] spi: cadence_qspi: move trigger base configuration in init   Vikas Manocha
  • [U-Boot] [PATCH v4 2/5] spi: cadence_qspi: fix indirect read/write start address   Vikas Manocha
  • [U-Boot] [PATCH v4 3/5] spi: cadence_qspi: fix base trigger address & transfer start address   Vikas Manocha
  • [U-Boot] [PATCH v4 4/5] spi: cadence_qspi: rename ahbbase to flashbase for clarity   Vikas Manocha
  • [U-Boot] [PATCH v4 5/5] spi: cadence_qspi: get fifo width from device tree   Vikas Manocha
• [U-Boot] [RESEND PATCH v4 0/5] spi: cadence_qspi: optimize & fix indirect rd-writes   Vikas Manocha
  • [U-Boot] [RESEND PATCH v4 2/5] spi: cadence_qspi: fix indirect read/write start address   Vikas Manocha
  • [U-Boot] [RESEND PATCH v4 3/5] spi: cadence_qspi: fix base trigger address & transfer start address   Vikas Manocha
  • [U-Boot] [RESEND PATCH v4 4/5] spi: cadence_qspi: rename ahbbase to flashbase for clarity   Vikas Manocha
  • [U-Boot] [RESEND PATCH v4 5/5] spi: cadence_qspi: get fifo width from device tree   Vikas Manocha
  • [U-Boot] [RESEND PATCH v4 0/5] spi: cadence_qspi: optimize & fix indirect rd-writes   Marek Vasut
    • [U-Boot] [RESEND PATCH v4 0/5] spi: cadence_qspi: optimize & fix indirect rd-writes   vikas
      • [U-Boot] [RESEND PATCH v4 0/5] spi: cadence_qspi: optimize & fix indirect rd-writes   Marek Vasut
• [U-Boot] [RESEND PATCH v4 1/5] spi: cadence_qspi: move trigger base configuration in init   Vikas Manocha
• [U-Boot] Periodic task   Ran Shalit
  • [U-Boot] Periodic task   Heiko Schocher
    • [U-Boot] Periodic task   Ran Shalit
      • [U-Boot] Periodic task   Heiko Schocher
      • [U-Boot] Periodic task   Ran Shalit
      • [U-Boot] Periodic task   Heiko Schocher
      • [U-Boot] Periodic task   Ran Shalit
• [U-Boot] [PATCH] imx: arch-mx6: add is_soc_type helper macro   Adrian Alonso
  • [U-Boot] [PATCH] imx: arch-mx6: add is_soc_type helper macro   Adrian Alonso
    • [U-Boot] [PATCH v2] thermal: imx_thermal: rework driver to be reused   Adrian Alonso
• [U-Boot] [PATCH V2 2/3] mtd: nand: mxs check maximum ecc that platfrom supports   Scott Wood
  • [U-Boot] [PATCH V2 2/3] mtd: nand: mxs check maximum ecc that platfrom supports   Peng Fan
    • [U-Boot] [PATCH V2 2/3] mtd: nand: mxs check maximum ecc that platfrom supports   Scott Wood
      • [U-Boot] [PATCH V2 2/3] mtd: nand: mxs check maximum ecc that platfrom supports   Peng Fan
      • [U-Boot] [PATCH V2 2/3] mtd: nand: mxs check maximum ecc that platfrom supports   Stefano Babic
• [U-Boot] [PATCH][v6] imx: system counter driver for imx7d and mx6ul   Adrian Alonso
• [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Chin Liang See
  • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Marek Vasut
    • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Chin Liang See
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Marek Vasut
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Chin Liang See
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Marek Vasut
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Chin Liang See
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Marek Vasut
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Chin Liang See
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Marek Vasut
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Chin Liang See
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Marek Vasut
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Jagan Teki
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Chin Liang See
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Marek Vasut
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Jagan Teki
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Marek Vasut
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Jagan Teki
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Tom Rini
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Jagan Teki
    • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Simon Glass
      • [U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming   Marek Vasut
• [U-Boot] [U-BOOT][PATCH]ARM Fix pandaboard es and a4 revision ID   dbatzle at dcbcyber.com
• [U-Boot] [PATCH v3] buildman: Improve the config comparison feature   Simon Glass
• [U-Boot] [PATCH v2 1/4] gpio: UniPhier: add driver for UniPhier GPIO controller   Simon Glass
  • [U-Boot] [PATCH v2 1/4] gpio: UniPhier: add driver for UniPhier GPIO controller   Masahiro Yamada
• [U-Boot] [PATCH v2 2/4] gpio: do not include <asm/arch/gpio.h> for UniPhier   Simon Glass
  • [U-Boot] [PATCH v2 2/4] gpio: do not include <asm/arch/gpio.h> for UniPhier   Masahiro Yamada
• [U-Boot] [PATCH v2 3/4] ARM: UniPhier: enable UniPhier GPIO driver   Simon Glass
• [U-Boot] [PATCH v2 4/4] ARM: dts: UniPhier: add GPIO controller nodes   Simon Glass
• [U-Boot] Pull request: nand flash master   Scott Wood
  • [U-Boot] Pull request: nand flash master   Tom Rini
    • [U-Boot] Pull request: nand flash master   Scott Wood
      • [U-Boot] Pull request: nand flash master   Tom Rini
      • [U-Boot] Pull request: nand flash master   Masahiro Yamada
      • [U-Boot] Pull request: nand flash master   Masahiro Yamada
      • [U-Boot] Pull request: nand flash master   Tom Rini
• [U-Boot] [PATCH V2] mxc: ocotp fix hole in shadow registers   Peng Fan
  • [U-Boot] [PATCH V2] mxc: ocotp fix hole in shadow registers   Stefano Babic
    • [U-Boot] [PATCH V2] mxc: ocotp fix hole in shadow registers   Stefano Babic
• [U-Boot] [PATCH] imx-common: timer: clean up code   Peng Fan
• [U-Boot] [PATCH] driver: misc: correct Kconfig entry   Peng Fan
  • [U-Boot] [PATCH] driver: misc: correct Kconfig entry   Simon Glass
• [U-Boot] [PATCH v2 0/5] fix NetConsole for CONFIG_DM_ETH   Bernhard Nortmann
• [U-Boot] [PATCH v2 1/5] net: expose eth_is_active() function to test network device state   Bernhard Nortmann
  • [U-Boot] [PATCH v2 1/5] net: expose eth_is_active() function to test network device state   Joe Hershberger
  • [U-Boot] [PATCH v3 1/5] net: expose eth_is_active() function to test network device state   Bernhard Nortmann
• [U-Boot] [PATCH v2 2/5] net: fix netconsole when CONFIG_DM_ETH is set   Bernhard Nortmann
  • [U-Boot] [PATCH v2 2/5] net: fix netconsole when CONFIG_DM_ETH is set   Joe Hershberger
• [U-Boot] [PATCH v2 3/5] net: avoid eth_unregister() call when function is unavailable   Bernhard Nortmann
  • [U-Boot] [PATCH v2 3/5] net: avoid eth_unregister() call when function is unavailable   Joe Hershberger
• [U-Boot] [PATCH v2 4/5] net: support NETCONSOLE option via Kconfig   Bernhard Nortmann
  • [U-Boot] [PATCH v2 4/5] net: support NETCONSOLE option via Kconfig   Joe Hershberger
• [U-Boot] [PATCH v2 5/5] sunxi: add NetConsole by default for Banana Pi/Pro   Bernhard Nortmann
  • [U-Boot] [PATCH v2 5/5] sunxi: add NetConsole by default for Banana Pi/Pro   Joe Hershberger
• [U-Boot] Exynos 5800/5422 CPU ID inconsistency.   Przemyslaw Marczak
  • [U-Boot] Exynos 5800/5422 CPU ID inconsistency.   Simon Glass
    • [U-Boot] Exynos 5800/5422 CPU ID inconsistency.   Sjoerd Simons
      • [U-Boot] Exynos 5800/5422 CPU ID inconsistency.   Przemyslaw Marczak
• [U-Boot] [PATCH v2 01/10] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Bin Meng
  • [U-Boot] [PATCH v2 02/10] net: e1000: Fix build warnings for 32-bit   Bin Meng
    • [U-Boot] [PATCH v2 02/10] net: e1000: Fix build warnings for 32-bit   Simon Glass
    • [U-Boot] [PATCH v2 02/10] net: e1000: Fix build warnings for 32-bit   Joe Hershberger
      • [U-Boot] [PATCH v2 02/10] net: e1000: Fix build warnings for 32-bit   Simon Glass
  • [U-Boot] [PATCH v2 03/10] dm: eth: Do not print misleading "Net Initialization Skipped"   Bin Meng
    • [U-Boot] [PATCH v2 03/10] dm: eth: Do not print misleading "Net Initialization Skipped"   Joe Hershberger
  • [U-Boot] [PATCH v2 04/10] dm: test: Add a new test case for dm_test_eth_rotate   Bin Meng
    • [U-Boot] [PATCH v2 04/10] dm: test: Add a new test case for dm_test_eth_rotate   Joe Hershberger
  • [U-Boot] [PATCH v2 05/10] dm: eth: Correctly detect alias in eth_get_dev_by_name()   Bin Meng
    • [U-Boot] [PATCH v2 05/10] dm: eth: Correctly detect alias in eth_get_dev_by_name()   Joe Hershberger
  • [U-Boot] [PATCH v2 06/10] x86: crownbay: Convert to use CONFIG_DM_USB   Bin Meng
  • [U-Boot] [PATCH v2 07/10] x86: crownbay: Convert to use CONFIG_DM_ETH for E1000   Bin Meng
    • [U-Boot] [PATCH v2 07/10] x86: crownbay: Convert to use CONFIG_DM_ETH for E1000   Joe Hershberger
  • [U-Boot] [PATCH v2 08/10] net: pch_gbe: Convert to driver model   Bin Meng
  • [U-Boot] [PATCH v2 09/10] net: pch_gbe: Add Kconfig option   Bin Meng
    • [U-Boot] [PATCH v2 09/10] net: pch_gbe: Add Kconfig option   Joe Hershberger
    • [U-Boot] [PATCH v2 09/10] net: pch_gbe: Add Kconfig option   Joe Hershberger
      • [U-Boot] [PATCH v2 09/10] net: pch_gbe: Add Kconfig option   Bin Meng
      • [U-Boot] [PATCH v2 09/10] net: pch_gbe: Add Kconfig option   Joe Hershberger
  • [U-Boot] [PATCH v2 10/10] x86: crownbay: Enable CONFIG_PCH_GBE   Bin Meng
    • [U-Boot] [PATCH v2 10/10] x86: crownbay: Enable CONFIG_PCH_GBE   Joe Hershberger
      • [U-Boot] [PATCH v2 10/10] x86: crownbay: Enable CONFIG_PCH_GBE   Bin Meng
      • [U-Boot] [PATCH v2 10/10] x86: crownbay: Enable CONFIG_PCH_GBE   Bin Meng
      • [U-Boot] [PATCH v2 10/10] x86: crownbay: Enable CONFIG_PCH_GBE   Joe Hershberger
  • [U-Boot] [PATCH v2 01/10] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Joe Hershberger
    • [U-Boot] [PATCH v2 01/10] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Bin Meng
• [U-Boot] Can't start Linux if U-Boot built with CONFIG_WATCHDOG   Paul Murphy
• [U-Boot] [PATCH] ARM: ti_armv7_common: Use partuuid for detecting mmc root fs   Lokesh Vutla
  • [U-Boot] [PATCH] ARM: ti_armv7_common: Use partuuid for detecting mmc root fs   Tom Rini
• [U-Boot] [PATCH 00/10] Kconfig and ti omap configs tidy up   Igor Grinberg
  • [U-Boot] [PATCH 01/10] configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST   Igor Grinberg
    • [U-Boot] [PATCH 01/10] configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST   Stefan Roese
  • [U-Boot] [PATCH 02/10] Kconfig: fix typo in CONFIG_FIT description   Igor Grinberg
    • [U-Boot] [PATCH 02/10] Kconfig: fix typo in CONFIG_FIT description   Simon Glass
  • [U-Boot] [PATCH 04/10] Kconfig: add CONFIG_CMD_BOOTZ   Igor Grinberg
  • [U-Boot] [PATCH 06/10] ti: omap/am: move CONFIG_HUSH_PARSER to defconfig   Igor Grinberg
  • [U-Boot] [PATCH 07/10] ti: omap/am: move CONFIG_CMD_BOOTZ to defconfig   Igor Grinberg
  • [U-Boot] [PATCH 08/10] ti: omap/am: move CONFIG_CMD_NAND to defconfig   Igor Grinberg
  • [U-Boot] [PATCH 09/10] ti: omap/am: move CONFIG_CMD_I2C to defconfig   Igor Grinberg
  • [U-Boot] [PATCH 10/10] ti: omap/am: move CONFIG_BOOTDELAY to defconfig   Igor Grinberg
• [U-Boot] [PATCH 03/10] Kconfig: add CONFIG_BOOTDELAY   Igor Grinberg
  • [U-Boot] [PATCH 03/10] Kconfig: add CONFIG_BOOTDELAY   Simon Glass
• [U-Boot] [PATCH 05/10] ti: omap3: config: remove 1 from boolean define   Igor Grinberg
• [U-Boot] [linux-sunxi][PATCH v2] sunxi: Add support for the Olimex A20 EVB   codekipper at gmail.com
  • [U-Boot] [linux-sunxi][PATCH v2] sunxi: Add support for the Olimex A20 EVB   Hans de Goede
• [U-Boot] [PATCH 1/2] tools/atmelimage.c: Fix warning when debug is enabled   Tom Rini
  • [U-Boot] [PATCH 2/2] tools/mkimage.c: Clarify help text for -D slightly   Tom Rini
  • [U-Boot] [PATCH 1/2] tools/atmelimage.c: Fix warning when debug is enabled   Andreas Bießmann
    • [U-Boot] [PATCH 1/2] tools/atmelimage.c: Fix warning when debug is enabled   Tom Rini
  • [U-Boot] [PATCH v2 1/2] tools/atmelimage.c: Fix warning when debug is enabled   Andreas Bießmann
    • [U-Boot] [PATCH v2 1/2] tools/atmelimage.c: Fix warning when debug is enabled   Tom Rini
• [U-Boot] [PATCH v5 0/5] spi: cadence_qspi: optimize & fix indirect rd-writes   Vikas Manocha
  • [U-Boot] [PATCH v5 2/5] spi: cadence_qspi: fix indirect read/write start address   Vikas Manocha
    • [U-Boot] [PATCH v5 2/5] spi: cadence_qspi: fix indirect read/write start address   Marek Vasut
      • [U-Boot] [PATCH v5 2/5] spi: cadence_qspi: fix indirect read/write start address   Vikas MANOCHA
  • [U-Boot] [PATCH v5 3/5] spi: cadence_qspi: fix base trigger address & transfer start address   Vikas Manocha
    • [U-Boot] [PATCH v5 3/5] spi: cadence_qspi: fix base trigger address & transfer start address   Marek Vasut
      • [U-Boot] [PATCH v5 3/5] spi: cadence_qspi: fix base trigger address & transfer start address   Vikas MANOCHA
  • [U-Boot] [PATCH v5 4/5] spi: cadence_qspi: rename ahbbase to flashbase for clarity   Vikas Manocha
  • [U-Boot] [PATCH v5 5/5] spi: cadence_qspi: get fifo width from device tree   Vikas Manocha
• [U-Boot] [PATCH v5 1/5] spi: cadence_qspi: move trigger base configuration in init   Vikas Manocha
  • [U-Boot] [PATCH v5 1/5] spi: cadence_qspi: move trigger base configuration in init   Marek Vasut
    • [U-Boot] [PATCH v5 1/5] spi: cadence_qspi: move trigger base configuration in init   Vikas MANOCHA
      • [U-Boot] [PATCH v5 1/5] spi: cadence_qspi: move trigger base configuration in init   Marek Vasut
      • [U-Boot] [PATCH v5 1/5] spi: cadence_qspi: move trigger base configuration in init   Vikas MANOCHA
      • [U-Boot] [PATCH v5 1/5] spi: cadence_qspi: move trigger base configuration in init   Vikas MANOCHA
• [U-Boot] [PATCH] arm: imx: common rework cache settings for imx6   Adrian Alonso
  • [U-Boot] [PATCH] arm: imx: imx-common: init: move arch init common setup   Adrian Alonso
    • [U-Boot] [PATCH] arm: imx: imx-common: init: move arch init common setup   Peng Fan
      • [U-Boot] [PATCH] arm: imx: imx-common: init: move arch init common setup   Peter Robinson
      • [U-Boot] [PATCH] arm: imx: imx-common: init: move arch init common setup   Peng Fan
      • [U-Boot] [PATCH] arm: imx: imx-common: init: move arch init common setup   Alonso Adrian
      • [U-Boot] [PATCH] arm: imx: imx-common: init: move arch init common setup   Otavio Salvador
  • [U-Boot] [PATCH] arm: imx: common rework cache settings for imx6   Peng Fan
    • [U-Boot] [PATCH] arm: imx: common rework cache settings for imx6   Alonso Adrian
• [U-Boot] [PATCH] lpc32xx: remove duplicated DMA_CLK_ENABLE bit definition   Vladimir Zapolskiy
  • [U-Boot] [PATCH] lpc32xx: remove duplicated DMA_CLK_ENABLE bit definition   LEMIEUX, SYLVAIN
• [U-Boot] [PATCH v5 0/3] add pinctrl driver framework   Masahiro Yamada
  • [U-Boot] [PATCH v5 2/3] pinctrl: add pin control uclass support   Masahiro Yamada
    • [U-Boot] [PATCH v5 2/3] pinctrl: add pin control uclass support   Simon Glass
• [U-Boot] [PATCH v5 1/3] dm: core: allow device_bind() to not return a device pointer   Masahiro Yamada
  • [U-Boot] [PATCH v5 1/3] dm: core: allow device_bind() to not return a device pointer   Simon Glass
• [U-Boot] [PATCH v5 3/3] pinctrl: sandbox: add sandbox pinctrl driver   Masahiro Yamada
  • [U-Boot] [PATCH v5 3/3] pinctrl: sandbox: add sandbox pinctrl driver   Simon Glass
• [U-Boot] [PATCH] t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdm   Zhao Qiang
  • [U-Boot] [PATCH] t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdm   Kushwaha Prabhakar
    • [U-Boot] [PATCH] t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdm   Zhao Qiang
      • [U-Boot] [PATCH] t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdm   Kushwaha Prabhakar
      • [U-Boot] [PATCH] t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdm   Zhao Qiang
• [U-Boot] [PATCH] driver: misc: add MXC_OCOTP Kconfig entry   Peng Fan
• [U-Boot] ROM build failure on Galileo   Andy Pont
  • [U-Boot] ROM build failure on Galileo   Bin Meng
    • [U-Boot] ROM build failure on Galileo   Bin Meng
      • [U-Boot] ROM build failure on Galileo   Andy Pont
      • [U-Boot] ROM build failure on Galileo   Bin Meng
• [U-Boot] [PATCH v2] omap-common: SYS_BOOT fallback logic correction and support for more devices   Paul Kocialkowski
  • [U-Boot] [PATCH v2] omap-common: SYS_BOOT fallback logic correction and support for more devices   Hannes Schmelzer
  • [U-Boot] [U-Boot, v2] omap-common: SYS_BOOT fallback logic correction and support for more devices   Tom Rini
• [U-Boot] [PATCH] mtd: denali: do not allocate page_buffer in .bss section   Masahiro Yamada
  • [U-Boot] [PATCH] mtd: denali: do not allocate page_buffer in .bss section   Masahiro Yamada
• [U-Boot] Porting uboot (2015.01) to a new Hardware Platform   ManuelCurcio at Eaton.com
• [U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Peng Fan
  • [U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Marek Vasut
    • [U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Stephen Warren
      • [U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Peng Fan
      • [U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Peng Fan
    • [U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Peng Fan
• [U-Boot] [PATCH 1/3] x86: ifdtool: Support checking region overlap before U-Boot   Bin Meng
  • [U-Boot] [PATCH 2/3] x86: doc: Change to use CONFIG_VGA_BIOS_ADDR   Bin Meng
    • [U-Boot] [PATCH 2/3] x86: doc: Change to use CONFIG_VGA_BIOS_ADDR   Simon Glass
  • [U-Boot] [PATCH 3/3] x86: bayleybay: Change default vga bios rom address   Bin Meng
    • [U-Boot] [PATCH 3/3] x86: bayleybay: Change default vga bios rom address   Simon Glass
  • [U-Boot] [PATCH 1/3] x86: ifdtool: Support checking region overlap before U-Boot   Andy Pont
  • [U-Boot] [PATCH 1/3] x86: ifdtool: Support checking region overlap before U-Boot   Simon Glass
• [U-Boot] [PATCH 1/7] omap-common: Common omap_die_id definition   Paul Kocialkowski
  • [U-Boot] [PATCH 2/7] omap3: omap_die_id support   Paul Kocialkowski
  • [U-Boot] [PATCH 3/7] omap4: omap_die_id support   Paul Kocialkowski
  • [U-Boot] [PATCH 4/7] omap5: omap_die_id support   Paul Kocialkowski
  • [U-Boot] [PATCH 5/7] omap-common: Common serial and usbethaddr functions based on die id   Paul Kocialkowski
  • [U-Boot] [PATCH 6/7] omap-common: Common function to display die id, replacing omap3-specific version   Paul Kocialkowski
  • [U-Boot] [PATCH 7/7] omap-common: Common get_board_serial function to pass serial through ATAG   Paul Kocialkowski
• [U-Boot] [PATCH] image: fix Android ramdisk support when dtb is specified   Paul Kocialkowski
  • [U-Boot] [PATCH] image: fix Android ramdisk support when dtb is specified   Tom Rini
• [U-Boot] [PATCH][v2] arm: imx: imx-common: init: move arch init common setup   Adrian Alonso
• [U-Boot] [PATCH] common/image.c: Make boot_get_ramdisk() perform a check for Android images   Tom Rini
  • [U-Boot] [PATCH] common/image.c: Make boot_get_ramdisk() perform a check for Android images   Rob Herring
    • [U-Boot] [PATCH] common/image.c: Make boot_get_ramdisk() perform a check for Android images   Tom Rini
      • [U-Boot] [PATCH] common/image.c: Make boot_get_ramdisk() perform a check for Android images   Rob Herring
      • [U-Boot] [PATCH] common/image.c: Make boot_get_ramdisk() perform a check for Android images   Tom Rini
• [U-Boot] ls2085ardb not booting   Scott Wood
  • [U-Boot] ls2085ardb not booting   York Sun
• [U-Boot] [PATCH 1/2] net: reject Bootp/DHCP packets with bad OP value   Stefan Brüns
• [U-Boot] [PATCH 2/2] net: send RFC1542 compliant value for bootp requests   Stefan Brüns
• [U-Boot] valid RAM region on a 256MB fails occasionally   harsha kiran
  • [U-Boot] valid RAM region on a 256MB fails occasionally   harsha kiran
• [U-Boot] [PATCH v2] x86: panther: Add PCI and video configuration   Simon Glass
  • [U-Boot] [PATCH v2] x86: panther: Add PCI and video configuration   Bin Meng
• [U-Boot] [PATCH V2] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Peng Fan
  • [U-Boot] [PATCH V2] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback   Marek Vasut
• [U-Boot] [PATCH] nios2: move command line configuration to Kconfig   Thomas Chou
• [U-Boot] [PATCH v3] x86: panther: Add PCI and video configuration   Simon Glass
• [U-Boot] [PATCH V2] t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdm   Zhao Qiang
• [U-Boot] [PATCH V2 0/4] drivers/sandbox: Introduce a simplified remoteproc framework   Nishanth Menon
  • [U-Boot] [PATCH V2 1/4] drivers: Introduce a simplified remoteproc framework   Nishanth Menon
  • [U-Boot] [PATCH V2 2/4] remoteproc: Introduce a sandbox dummy driver   Nishanth Menon
  • [U-Boot] [PATCH V2 3/4] sandbox: Introduce dummy remoteproc nodes   Nishanth Menon
  • [U-Boot] [PATCH V2 4/4] test: Add basic tests for remoteproc   Nishanth Menon
• [U-Boot] [PATCH v3 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Bin Meng
  • [U-Boot] [PATCH v3 4/9] dm: eth: Correctly detect alias in eth_get_dev_by_name()   Bin Meng
  • [U-Boot] [PATCH v3 5/9] x86: crownbay: Convert to use CONFIG_DM_USB   Bin Meng
  • [U-Boot] [PATCH v3 6/9] x86: crownbay: Convert to use CONFIG_DM_ETH for E1000   Bin Meng
  • [U-Boot] [PATCH v3 7/9] net: pch_gbe: Convert to driver model   Bin Meng
  • [U-Boot] [PATCH v3 8/9] net: pch_gbe: Add Kconfig option   Bin Meng
  • [U-Boot] [PATCH v3 9/9] x86: crownbay: Enable CONFIG_PCH_GBE   Bin Meng
  • [U-Boot] [PATCH v3 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Simon Glass
    • [U-Boot] [PATCH v3 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"   Joe Hershberger
• [U-Boot] [PATCH v3 2/9] dm: eth: Do not print misleading "Net Initialization Skipped"   Bin Meng
• [U-Boot] [PATCH v3 3/9] dm: test: Add a new test case for dm_test_eth_rotate   Bin Meng
• [U-Boot] [PATCH] ARM: uniphier: fix build error when CONFIG_DEBUG_LL is defined   Masahiro Yamada
  • [U-Boot] [PATCH] ARM: uniphier: fix build error when CONFIG_DEBUG_LL is defined   Masahiro Yamada
• [U-Boot] [PATCH] ARM: uniphier: remove unused macro   Masahiro Yamada
  • [U-Boot] [PATCH] ARM: uniphier: remove unused macro   Masahiro Yamada
• [U-Boot] [PATCH] ARM: DRA7: emif: Fix disabling/enabling of refreshes   Lokesh Vutla
• [U-Boot] [PATCH v2 0/3] ti_armv7_common: env: Use partuuid for detecting mmc root fs   Lokesh Vutla
  • [U-Boot] [PATCH v2 1/3] ti_omap4_common: use ext4 fs as default.   Lokesh Vutla
  • [U-Boot] [PATCH v2 2/3] ti_armv7_common: env: Consolidate MMC args   Lokesh Vutla
  • [U-Boot] [PATCH v2 3/3] ti_armv7_common: env: Use partuuid for detecting mmc root fs   Lokesh Vutla
• [U-Boot] [PATCH] net: Fix parsing of Bootp/DHCP option 0 (Pad)   Stefan Brüns
• [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Jian Luo
  • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
    • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Jian Luo
      • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
      • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Jian Luo
      • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
      • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Jian Luo
      • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
      • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Jian Luo
      • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
  • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Simon Glass
    • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
      • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Simon Glass
      • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
      • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Simon Glass
      • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
      • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Simon Glass
      • [U-Boot] [PATCH] arm: socfpga: dm: Fix DM initialization failure after warm reset   Marek Vasut
• [U-Boot] [PATCH 1/2] x86: coreboot: Convert to use more dm drivers   Bin Meng
  • [U-Boot] [PATCH 2/2] x86: bayleybay: Convert to use more dm drivers   Bin Meng
    • [U-Boot] [PATCH 2/2] x86: bayleybay: Convert to use more dm drivers   Simon Glass
  • [U-Boot] [PATCH 1/2] x86: coreboot: Convert to use more dm drivers   Simon Glass
• [U-Boot] [PATCH 1/2] net: Do not overwrite options found in overloaded 'file' field   Stefan Brüns
• [U-Boot] [PATCH 2/2] net: parse DHCP options from overloaded file/sname fields   Stefan Brüns
• [U-Boot] [PATCH 1/3] ARM: uniphier: select SPL_DM rather than default in defconfig   Masahiro Yamada
  • [U-Boot] [PATCH 2/3] ARM: uniphier: enable SPL_OF_CONTROL   Masahiro Yamada
    • [U-Boot] [PATCH 2/3] ARM: uniphier: enable SPL_OF_CONTROL   Marek Vasut
      • [U-Boot] [PATCH 2/3] ARM: uniphier: enable SPL_OF_CONTROL   Masahiro Yamada
      • [U-Boot] [PATCH 2/3] ARM: uniphier: enable SPL_OF_CONTROL   Marek Vasut
      • [U-Boot] [PATCH 2/3] ARM: uniphier: enable SPL_OF_CONTROL   Masahiro Yamada
      • [U-Boot] [PATCH 2/3] ARM: uniphier: enable SPL_OF_CONTROL   Marek Vasut
    • [U-Boot] [PATCH 2/3] ARM: uniphier: enable SPL_OF_CONTROL   Simon Glass
    • [U-Boot] [PATCH 2/3] ARM: uniphier: enable SPL_OF_CONTROL   Masahiro Yamada
  • [U-Boot] [PATCH 3/3] serial: uniphier: drop platform data support   Masahiro Yamada
    • [U-Boot] [PATCH 3/3] serial: uniphier: drop platform data support   Simon Glass
    • [U-Boot] [PATCH 3/3] serial: uniphier: drop platform data support   Masahiro Yamada
  • [U-Boot] [PATCH 1/3] ARM: uniphier: select SPL_DM rather than default in defconfig   Masahiro Yamada
• [U-Boot] [PATCH] serial: drop redundant depends on   Masahiro Yamada
  • [U-Boot] [PATCH] serial: drop redundant depends on   Simon Glass
• [U-Boot] [PATCH] dts: fix dependency of OF_SPL_REMOVE_PROPS   Masahiro Yamada
  • [U-Boot] [PATCH] dts: fix dependency of OF_SPL_REMOVE_PROPS   Simon Glass
    • [U-Boot] [PATCH] dts: fix dependency of OF_SPL_REMOVE_PROPS   Simon Glass
• [U-Boot] [PATCH 0/3] Add distro bootcommand to beagle bone and related boards   Sjoerd Simons
  • [U-Boot] [PATCH 1/3] config_distro_bootcmd.h: Use a private variable for bootpart   Sjoerd Simons
    • [U-Boot] [PATCH 1/3] config_distro_bootcmd.h: Use a private variable for bootpart   Stephen Warren
  • [U-Boot] [PATCH 2/3] configs: ti_armv7_common.h: Add default addresses for pxe and scripts   Sjoerd Simons
  • [U-Boot] [PATCH 3/3] configs: am335x_evm: Support distro bootcmds   Sjoerd Simons
• [U-Boot] [RFC PATCH] arm: cache_v7: fix dcache invalidation   Markus Niebel
  • [U-Boot] [RFC PATCH] arm: cache_v7: fix dcache invalidation   Hannes Schmelzer
    • [U-Boot] [RFC PATCH] arm: cache_v7: fix dcache invalidation   Markus Niebel
• [U-Boot] [PATCH 1/3] ARM: dts: uniphier: sync with Linux   Masahiro Yamada
  • [U-Boot] [PATCH 3/3] ARM: dts: uniphier: add ProXstream2 and PH1-LD6b SoC/board support   Masahiro Yamada
    • [U-Boot] [PATCH 3/3] ARM: dts: uniphier: add ProXstream2 and PH1-LD6b SoC/board support   Masahiro Yamada
  • [U-Boot] [PATCH 1/3] ARM: dts: uniphier: sync with Linux   Masahiro Yamada
• [U-Boot] [PATCH 2/3] ARM: dts: uniphier: add PH1-Pro5 SoC support   Masahiro Yamada
  • [U-Boot] [PATCH 2/3] ARM: dts: uniphier: add PH1-Pro5 SoC support   Masahiro Yamada
• [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Lukasz Majewski
  • [U-Boot] [PATCH 2/2] mmc: dw_mmc: Make timeout error visible to u-boot console   Lukasz Majewski
    • [U-Boot] [PATCH 2/2] mmc: dw_mmc: Make timeout error visible to u-boot console   Simon Glass
      • [U-Boot] [PATCH 2/2] mmc: dw_mmc: Make timeout error visible to u-boot console   Lukasz Majewski
      • [U-Boot] [PATCH 2/2] mmc: dw_mmc: Make timeout error visible to u-boot console   Simon Glass
  • [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Marek Vasut
    • [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Lukasz Majewski
      • [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Marek Vasut
      • [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Lukasz Majewski
      • [U-Boot] [PATCH 1/2] mmc: dw_mmc: Increase timeout to 20 seconds   Marek Vasut
• [U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4   Przemyslaw Marczak
  • [U-Boot] [PATCH 1/7] s5p: cpu_info: use defined CPU name if available   Przemyslaw Marczak
  • [U-Boot] [PATCH 3/7] Exynos5422/5800: set cpu id to 0x5422   Przemyslaw Marczak
  • [U-Boot] [PATCH 4/7] dm: pmic: add s2mps11 PMIC I/O driver   Przemyslaw Marczak
  • [U-Boot] [PATCH 5/7] odroid-xu3: enable s2mps11 PMIC support   Przemyslaw Marczak
  • [U-Boot] [PATCH 6/7] Exynos: add internal ADC driver   Przemyslaw Marczak
  • [U-Boot] [PATCH 7/7] exynos5-dt: add board detection for Odroid XU3/XU3L/XU4.   Przemyslaw Marczak
  • [U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4   Anand Moon
    • [U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4   Przemyslaw Marczak
  • [U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4   Simon Glass
    • [U-Boot] [PATCH 0/7] Add board detection for Odroid XU3 / XU3Lite / XU4   Przemyslaw Marczak
• [U-Boot] [PATCH 2/7] peach-pi: define CPU name for SoC Exynos5800   Przemyslaw Marczak
• [U-Boot] [RFC PATCH v2] arm: cache_v7: fix dcache invalidation   Markus Niebel
• [U-Boot] [U-Boot, 1/2] ti: armv7: enable EXT support in SPL (using ti_armv7_common.h)   Ash Charles
  • [U-Boot] [U-Boot, 1/2] ti: armv7: enable EXT support in SPL (using ti_armv7_common.h)   Tom Rini
• [U-Boot] [PATCH v2 0/8] arm: Tidy up early init   Simon Glass
  • [U-Boot] [PATCH v2 1/8] Move board_init_f_mem() into a common location   Simon Glass
• [U-Boot] [PATCH v2 2/8] board_init_f_mem(): Don't require memset()   Simon Glass
• [U-Boot] [PATCH v2 3/8] board_init_f_mem(): Don't create an unused early malloc() area   Simon Glass
• [U-Boot] [PATCH v2 4/8] arm: Switch aarch64 to using generic global_data setup   Simon Glass
• [U-Boot] [PATCH v2 5/8] arm: Switch 32-bit ARM to using generic global_data setup   Simon Glass
• [U-Boot] [PATCH v2 6/8] microblaze: Add a TODO to call board_init_f_mem()   Simon Glass
• [U-Boot] [PATCH v2 7/8] zynq: Move SPL console init out of board_init_f()   Simon Glass
• [U-Boot] [PATCH v2 8/8] Revert "ARM: zynq: disable CONFIG_SYS_MALLOC_F to fix MMC boot"   Simon Glass
• [U-Boot] [PATCH] arm: imx-common: init: extend init_aips to support imx7   Adrian Alonso
  • [U-Boot] [PATCH] arm: imx-common: init: extend init_aips to support imx7   Stefano Babic
    • [U-Boot] [PATCH] arm: imx-common: init: extend init_aips to support imx7   Alonso Adrian
• [U-Boot] [PATCH] arm: imx-common: init: rework wdog settings for imx6/imx7   Adrian Alonso
• [U-Boot] [PATCH][v6] imx: imx7d: add imx-common cpu support for imx7d   Adrian Alonso
  • [U-Boot] [PATCH][v6] imx: imx7d: add imx-common cpu support for imx7d   Stefano Babic
• [U-Boot] [PATCH][v6] imx: imx7d: Add SoC system support   Adrian Alonso
• [U-Boot] [PATCH][v6] imx: imx7d: initial arch level support   Adrian Alonso
  • [U-Boot] [PATCH][v6] imx: imx7d: initial arch level support   Stefano Babic
    • [U-Boot] [PATCH][v6] imx: imx7d: initial arch level support   Alonso Adrian
      • [U-Boot] [PATCH][v6] imx: imx7d: initial arch level support   Stefano Babic
• [U-Boot] [PATCH][v6] imx: mx7dsabresd: Add support for MX7D SABRESD board   Adrian Alonso
  • [U-Boot] [PATCH][v6] imx: mx7dsabresd: Add support for MX7D SABRESD board   Stefano Babic
• [U-Boot] [PATCH] thermal: imx: add imx7d soc thermal support   Adrian Alonso
• [U-Boot] [PATCH][v2] thermal: imx: add imx7d soc thermal support   Adrian Alonso
  • [U-Boot] [PATCH][v2] thermal: imx: add imx7d soc thermal support   Stefano Babic
• [U-Boot] [PATCH] nios2: enable CONFIG_NET_RANDOM_ETHADDR   Thomas Chou
• [U-Boot] [PATCH] arm: socfpga: Do not call board_init_r() from board_init_f()   Marek Vasut
• [U-Boot] [PATCH] Move malloc_cache_aligned() to malloc.h   Simon Glass
  • [U-Boot] [PATCH] Move malloc_cache_aligned() to malloc.h   Marcel Ziswiler
    • [U-Boot] [PATCH] Move malloc_cache_aligned() to malloc.h   Scott Wood
• [U-Boot] [PATCH 00/13] dm: arm: zynq: Convert serial driver to driver model   Simon Glass
  • [U-Boot] [PATCH 01/13] fdt: Add a function to look up a /chosen property   Simon Glass
  • [U-Boot] [PATCH 02/13] fdt: Correct handling of alias regions   Simon Glass
  • [U-Boot] [PATCH 03/13] fdtgrep: Simplify the alias generation code   Simon Glass
  • [U-Boot] [PATCH 04/13] dm: serial: Deal with stdout-path with an alias   Simon Glass
    • [U-Boot] [PATCH 04/13] dm: serial: Deal with stdout-path with an alias   Michal Simek
      • [U-Boot] [PATCH 04/13] dm: serial: Deal with stdout-path with an alias   Simon Glass
      • [U-Boot] [PATCH 04/13] dm: serial: Deal with stdout-path with an alias   Michal Simek
  • [U-Boot] [PATCH 05/13] dm: spl: Generate u-boot-spl-dtb.bin only when enabled   Simon Glass
  • [U-Boot] [PATCH 06/13] dm: spl: Support device tree when BSS is in a different section   Simon Glass
  • [U-Boot] [PATCH 07/13] arm: zynq: Use separate device tree instead of embedded   Simon Glass
    • [U-Boot] [PATCH 07/13] arm: zynq: Use separate device tree instead of embedded   Michal Simek
      • [U-Boot] [PATCH 07/13] arm: zynq: Use separate device tree instead of embedded   Simon Glass
      • [U-Boot] [PATCH 07/13] arm: zynq: Use separate device tree instead of embedded   Michal Simek
  • [U-Boot] [PATCH 08/13] arm: zynq: Drop unnecessary code in SPL board_init_f()   Simon Glass
  • [U-Boot] [PATCH 09/13] arm: zynq: Support the debug UART   Simon Glass
  • [U-Boot] [PATCH 10/13] dm: arm: zynq: Enable device tree control in SPL   Simon Glass
  • [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Simon Glass
    • [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Masahiro Yamada
      • [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Simon Glass
    • [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Michal Simek
      • [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Simon Glass
      • [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions   Michal Simek
  • [U-Boot] [PATCH 12/13] arm: zynq: serial: Drop non-device-tree serial driver portions   Simon Glass
  • [U-Boot] [PATCH 13/13] arm: zynq: Move serial driver to driver model   Simon Glass
    • [U-Boot] [PATCH 13/13] arm: zynq: Move serial driver to driver model   Michal Simek
      • [U-Boot] [PATCH 13/13] arm: zynq: Move serial driver to driver model   Simon Glass
      • [U-Boot] [PATCH 13/13] arm: zynq: Move serial driver to driver model   Michal Simek
  • [U-Boot] [PATCH 00/13] dm: arm: zynq: Convert serial driver to driver model   Michal Simek
• [U-Boot] Uboot   Antonio
  • [U-Boot] Uboot   Siarhei Siamashka
• [U-Boot] [UBOOT PATCH v1 0/2] Add ACPI table support on Minnowmax   Saket Sinha
  • [U-Boot] [UBOOT PATCH v1 1/2] x86: Add ACPI table support to Minnowmax   Saket Sinha
    • [U-Boot] [UBOOT PATCH v1 1/2] x86: Add ACPI table support to Minnowmax   Bin Meng
  • [U-Boot] [UBOOT PATCH v1 2/2] x86: Add DSDT table for supporting ACPI on Minnowmax   Saket Sinha
    • [U-Boot] [UBOOT PATCH v1 2/2] x86: Add DSDT table for supporting ACPI on Minnowmax   Bin Meng
      • [U-Boot] [UBOOT PATCH v1 2/2] x86: Add DSDT table for supporting ACPI on Minnowmax   Saket Sinha
• [U-Boot] [PATCH 0/5] Add support for additional splash screen locations   Nikita Kiryanov
  • [U-Boot] [PATCH 0/5] Add support for additional splash screen locations   Nikita Kiryanov
• [U-Boot] [PATCH 1/5] splash_source: rename *_read() to *_read_raw()   Nikita Kiryanov
• [U-Boot] [PATCH 2/5] splash_source: add support for filesystem formatted mmc   Nikita Kiryanov
• [U-Boot] [PATCH 3/5] splash_source: add support for filesystem formatted usb   Nikita Kiryanov
• [U-Boot] [PATCH 4/5] splash_source: add support for fileystem formatted sata   Nikita Kiryanov
• [U-Boot] [PATCH 5/5] arm: mx6: cm-fx6: add splash locations to cm-fx6   Nikita Kiryanov
• [U-Boot] [PATCH 0/3] cm-fx6 maintenance   Nikita Kiryanov
  • [U-Boot] [PATCH 1/3] arm: mx6: cm-fx6: force host mode on usb controller   Nikita Kiryanov
    • [U-Boot] [PATCH 1/3] arm: mx6: cm-fx6: force host mode on usb controller   Igor Grinberg
  • [U-Boot] [PATCH 2/3] arm: mx6: cm-fx6: print PCB revision   Nikita Kiryanov
    • [U-Boot] [PATCH 2/3] arm: mx6: cm-fx6: print PCB revision   Igor Grinberg
  • [U-Boot] [PATCH 3/3] arm: mx6: cm-fx6: switch to usb kbd polling via int queue   Nikita Kiryanov
    • [U-Boot] [PATCH 3/3] arm: mx6: cm-fx6: switch to usb kbd polling via int queue   Igor Grinberg
  • [U-Boot] [PATCH 0/3] cm-fx6 maintenance   Stefano Babic
• [U-Boot] [PATCH] net/arp: Do not run net_start_again() on timeout   Stefan Brüns
• [U-Boot] [PATCH] net/arp: account for ARP delay, avoid duplicate packets on timeout   Stefan Brüns
• [U-Boot] [PATCH] net: cancel timeout handler after DHCPACK   Stefan Brüns
• [U-Boot] pull request: u-boot-uniphier/master   Masahiro Yamada
  • [U-Boot] pull request: u-boot-uniphier/master   Tom Rini
• [U-Boot] [PATCH] smsc95xx: Fetch whole burst with 1 URB, avoid framing errors   Stefan Brüns
• [U-Boot] [PATCH] Revert "patman: use -D option for git format-patch"   Masahiro Yamada
  • [U-Boot] [PATCH] Revert "patman: use -D option for git format-patch"   Simon Glass
• [U-Boot] [PATCH] doc: document the fdtdir PXE command   Stefan Brüns
• [U-Boot] [PATCH] doc: Fix inconsistent filename in PXE config example   Stefan Brüns
• [U-Boot] [PATCH v2 0/8] dm: rockchip: Enable booting from MMC   Sjoerd Simons
  • [U-Boot] [PATCH v2 2/8] mmc: Probe DM based mmc devices in u-boot   Sjoerd Simons
    • [U-Boot] [PATCH v2 2/8] mmc: Probe DM based mmc devices in u-boot   Simon Glass
  • [U-Boot] [PATCH v2 5/8] rockchip: Add config_distro_bootcmd support   Sjoerd Simons
  • [U-Boot] [PATCH v2 6/8] arm: Turn of d-cache before i-cache   Sjoerd Simons
  • [U-Boot] [PATCH v2 7/8] rockchip: Drop first 32kb of zeros from the rkSD image type   Sjoerd Simons
  • [U-Boot] [PATCH v2 8/8] rockchip: Update todo in README.rockchip   Sjoerd Simons
• [U-Boot] [PATCH v2 1/8] doc: Fix reference to Rock pro when Rock 2 is meant   Sjoerd Simons
• [U-Boot] [PATCH v2 3/8] rockchip: Disable sdio mmc slot on rk3288-firefly   Sjoerd Simons
• [U-Boot] [PATCH v2 4/8] rockchip: Turn off CONFIG_SPL_LED_SUPPORT for firefly   Sjoerd Simons
  • [U-Boot] [PATCH v2 4/8] rockchip: Turn off CONFIG_SPL_LED_SUPPORT for firefly   Simon Glass
• [U-Boot] [PATCH] video: discard empty video_set_lut implementation   Anatolij Gustschin
• [U-Boot] [PATCH v5 00/41] dm: Introduce Rockchip RK3288 support   Simon Glass
  • [U-Boot] [PATCH v5 01/41] pinctrl: Add help text to Kconfig   Simon Glass
  • [U-Boot] [PATCH v5 02/41] pinctrl: Add the concept of peripheral IDs   Simon Glass
  • [U-Boot] [PATCH v5 03/41] dm: led: Tidy up SPL options for the led and led-gpio   Simon Glass
  • [U-Boot] [PATCH v5 04/41] mmc: Support bypass mode with the get_mmc_clk() method   Simon Glass
  • [U-Boot] [PATCH v5 05/41] dm: Improve handling of a missing uclass   Simon Glass
  • [U-Boot] [PATCH v5 06/41] dm: Provide better debugging when a device fails to bind   Simon Glass
  • [U-Boot] [PATCH v5 07/41] arm: reset: Avoid a build error when the reset uclass is enabled   Simon Glass
  • [U-Boot] [PATCH v5 08/41] rockchip: Add serial support   Simon Glass
  • [U-Boot] [PATCH v5 09/41] rockchip: Bring in RK3288 device tree file includes and bindings   Simon Glass
  • [U-Boot] [PATCH v5 10/41] rockchip: rk3288: dts: Make core devices available early   Simon Glass
  • [U-Boot] [PATCH v5 11/41] mkimage: Allow padding to any length   Simon Glass
  • [U-Boot] [PATCH v5 12/41] mkimage: Allow the original file size to be recorded   Simon Glass
  • [U-Boot] [PATCH v5 13/41] rockchip: Add the rkimage format to mkimage   Simon Glass
  • [U-Boot] [PATCH v5 14/41] rockchip: Add support for the SD image   Simon Glass
  • [U-Boot] [PATCH v5 15/41] rockchip: Add support for the SPI image   Simon Glass
  • [U-Boot] [PATCH v5 16/41] rockchip: gpio: Add rockchip GPIO driver   Simon Glass
  • [U-Boot] [PATCH v5 17/41] rockchip: Add basic peripheral and clock definitions   Simon Glass
  • [U-Boot] [PATCH v5 18/41] power: Add support for ACT8846 PMIC   Simon Glass
  • [U-Boot] [PATCH v5 19/41] power: regulator: Add a driver for ACT8846 regulators   Simon Glass
  • [U-Boot] [PATCH v5 20/41] rockchip: rk3288: Add clock driver   Simon Glass
  • [U-Boot] [PATCH v5 21/41] rockchip: rk3288: Add header files for PMU and GRF   Simon Glass
  • [U-Boot] [PATCH v5 22/41] rockchip: rk3288: Add SoC reset driver   Simon Glass
  • [U-Boot] [PATCH v5 23/41] rockchip: rk3288: Add a simple syscon driver   Simon Glass
  • [U-Boot] [PATCH v5 24/41] rockchip: rk3288: Add pinctrl driver   Simon Glass
  • [U-Boot] [PATCH v5 25/41] rockchip: rk3288: Add SDRAM init   Simon Glass
  • [U-Boot] [PATCH v5 26/41] rockchip: Add an MMC driver   Simon Glass
  • [U-Boot] [PATCH v5 27/41] rockchip: Add core SoC start-up code   Simon Glass
  • [U-Boot] [PATCH v5 28/41] rockchip: Add I2C driver   Simon Glass
  • [U-Boot] [PATCH v5 29/41] rockchip: Add SPI driver   Simon Glass
  • [U-Boot] [PATCH v5 30/41] rockchip: Add basic support for firefly-rk3288   Simon Glass
  • [U-Boot] [PATCH v5 31/41] rockchip: Add basic support for jerry   Simon Glass
  • [U-Boot] [PATCH v5 32/41] rockchip: Add a simple README   Simon Glass
  • [U-Boot] [PATCH v5 33/41] doc: Fix reference to Rock pro when Rock 2 is meant   Simon Glass
  • [U-Boot] [PATCH v5 34/41] mmc: Probe DM based mmc devices in u-boot   Simon Glass
  • [U-Boot] [PATCH v5 35/41] rockchip: Disable sdio mmc slot on rk3288-firefly   Simon Glass
  • [U-Boot] [PATCH v5 36/41] rockchip: Turn off CONFIG_SPL_LED for firefly   Simon Glass
  • [U-Boot] [PATCH v5 37/41] rockchip: Add config_distro_bootcmd support   Simon Glass
  • [U-Boot] [PATCH v5 38/41] arm: Turn of d-cache before i-cache   Simon Glass
  • [U-Boot] [PATCH v5 39/41] rockchip: Drop first 32kb of zeros from the rkSD image type   Simon Glass
  • [U-Boot] [PATCH v5 40/41] rockchip: Update todo in README.rockchip   Simon Glass
  • [U-Boot] [PATCH v5 41/41] rockchip: Put README image creation commands on one line   Simon Glass
• [U-Boot] Pull request: u-boot-video/master   Anatolij Gustschin
  • [U-Boot] Pull request: u-boot-video/master   Tom Rini
• [U-Boot] [PATCH 00/45] arm: Remove boards that have not moved to generic board init   Simon Glass
  • [U-Boot] [PATCH 05/45] arm: Remove unmaintained davinci boards   Simon Glass
• [U-Boot] [PATCH 01/45] arm: Remove balloon3 board   Simon Glass
• [U-Boot] [PATCH 02/45] arm: Remove eukrea boards   Simon Glass
• [U-Boot] [PATCH 03/45] arm: Remove most LaCie boards   Simon Glass
  • [U-Boot] [PATCH 03/45] arm: Remove most LaCie boards   Simon Guinot
    • [U-Boot] [PATCH 03/45] arm: Remove most LaCie boards   Simon Glass
      • [U-Boot] [PATCH 03/45] arm: Remove most LaCie boards   Albert ARIBAUD
• [U-Boot] [PATCH 04/45] arm: Remove snowball and u8500_href boards   Simon Glass
• [U-Boot] [PATCH 06/45] arm: Remove d2net_v2 defconfig file   Simon Glass
• [U-Boot] [PATCH 07/45] arm: Remove dig297 board   Simon Glass
• [U-Boot] [PATCH 08/45] arm: Remove eb_cpu9k2 and eb_cpu9k2_ram boards   Simon Glass
• [U-Boot] [PATCH 09/45] arm: Remove edb9315a board   Simon Glass
  • [U-Boot] [PATCH 09/45] arm: Remove edb9315a board   sergey kostanbaev
    • [U-Boot] [PATCH 09/45] arm: Remove edb9315a board   Simon Glass
• [U-Boot] [PATCH 10/45] arm: Remove enbw_cmc board   Simon Glass
• [U-Boot] [PATCH 11/45] arm: Remove ima3-mx53 board   Simon Glass
• [U-Boot] [PATCH 12/45] arm: Remove imx27lite, imx27_litekit and magnesium boards   Simon Glass
• [U-Boot] [PATCH 13/45] arm: Remove mx31_litekit board   Simon Glass
• [U-Boot] [PATCH 14/45] arm: Remove inetspace_v2_cmc board   Simon Glass
• [U-Boot] [PATCH 15/45] arm: Remove jornada board   Simon Glass
• [U-Boot] [PATCH 16/45] arm: Remove lp8x4x board   Simon Glass
• [U-Boot] [PATCH 17/45] arm: Remove meesc and meesc_dataflash boards   Simon Glass
  • [U-Boot] [PATCH 17/45] arm: Remove meesc and meesc_dataflash boards   Daniel Gorsulowski
  • [U-Boot] [PATCH 1/1] arm: at91: convert meesc board to generic board   Daniel Gorsulowski
    • [U-Boot] [PATCH 1/1] arm: at91: convert meesc board to generic board   Simon Glass
• [U-Boot] [PATCH 18/45] arm: Remove mv88f6281gtw_ge board   Simon Glass
• [U-Boot] [PATCH 19/45] arm: Remove mx51_efikamx, mx51_efikasb boards   Simon Glass
• [U-Boot] [PATCH 20/45] arm: Remove nhk8815 boards and nomadik arch   Simon Glass
• [U-Boot] [PATCH 21/45] arm: Remove omap3_logic board   Simon Glass
  • [U-Boot] [PATCH 21/45] arm: Remove omap3_logic board   Adam Ford
    • [U-Boot] [PATCH 21/45] arm: Remove omap3_logic board   Simon Glass
    • [U-Boot] [PATCH 21/45] arm: Remove omap3_logic board   Tom Rini
      • [U-Boot] [PATCH 21/45] arm: Remove omap3_logic board   Adam Ford
• [U-Boot] [PATCH 22/45] arm: Remove omap3_mvblx board   Simon Glass
• [U-Boot] [PATCH 23/45] arm: Remove omap3_sdp3430 board   Simon Glass
• [U-Boot] [PATCH 24/45] arm: Remove openrd boards   Simon Glass
  • [U-Boot] [PATCH 24/45] arm: Remove openrd boards   Prafulla Wadaskar
    • [U-Boot] [PATCH 24/45] arm: Remove openrd boards   Simon Kågström
• [U-Boot] [PATCH 25/45] arm: Remove otc570 board   Simon Glass
• [U-Boot] [PATCH 26/45] arm: Remove palmld board   Simon Glass
• [U-Boot] [PATCH 27/45] arm: Remove palmtc board   Simon Glass
• [U-Boot] [PATCH 28/45] arm: Remove polaris and trizepsiv boards   Simon Glass
  • [U-Boot] [PATCH 28/45] arm: Remove polaris and trizepsiv boards   Stefano Babic
• [U-Boot] [PATCH 29/45] arm: Remove portuxg20, stamp9g20 boards   Simon Glass
• [U-Boot] [PATCH 30/45] arm: Remove pxa255_idp, zipitz2 boards   Simon Glass
• [U-Boot] [PATCH 31/45] arm: Remove qong board   Simon Glass
• [U-Boot] [PATCH 32/45] arm: Remove rd6281a board   Simon Glass
• [U-Boot] [PATCH 33/45] arm: Remove scb9328 board   Simon Glass
• [U-Boot] [PATCH 34/45] arm: Remove tk71 board   Simon Glass
• [U-Boot] [PATCH 35/45] arm: Remove tt01 board   Simon Glass
• [U-Boot] [PATCH 36/45] arm: Remove versatileab board   Simon Glass
• [U-Boot] [PATCH 37/45] arm: Remove vision2 board   Simon Glass
  • [U-Boot] [PATCH 37/45] arm: Remove vision2 board   Stefano Babic
• [U-Boot] [PATCH 38/45] arm: Remove vl_ma2sc board   Simon Glass
• [U-Boot] [PATCH 39/45] arm: Remove vpac270_nor_128 board   Simon Glass
• [U-Boot] [PATCH 40/45] arm: Remove xaeniax board   Simon Glass
• [U-Boot] [PATCH 41/45] arm: Remove omap3_evm board   Simon Glass
  • [U-Boot] [PATCH 41/45] arm: Remove omap3_evm board   Tom Rini
    • [U-Boot] [PATCH 41/45] arm: Remove omap3_evm board   Tom Rini
  • [U-Boot] [PATCH 41/45] arm: Remove omap3_evm board   Felipe Balbi
    • [U-Boot] [PATCH 41/45] arm: Remove omap3_evm board   Tony Lindgren
    • [U-Boot] [PATCH 41/45] arm: Remove omap3_evm board   Simon Glass
• [U-Boot] [PATCH 42/45] arm: Remove palmtreo680 board   Simon Glass
• [U-Boot] [PATCH 43/45] arm: Remove ti814x_evm board   Simon Glass
  • [U-Boot] [PATCH 43/45] arm: Remove ti814x_evm board   Felipe Balbi
    • [U-Boot] [PATCH 43/45] arm: Remove ti814x_evm board   Tony Lindgren
    • [U-Boot] [PATCH 43/45] arm: Remove ti814x_evm board   Simon Glass
  • [U-Boot] [PATCH 43/45] arm: Remove ti814x_evm board   Tom Rini
• [U-Boot] [PATCH 44/45] arm: Remove ti816x_evm board   Simon Glass
  • [U-Boot] [PATCH 44/45] arm: Remove ti816x_evm board   Tom Rini
• [U-Boot] [PATCH 45/45] arm: Remove tx25 board   Simon Glass
• [U-Boot] [PATCH] mmc_spi: fix big-endian support error on be_to_cpu16   Thomas Chou
• [U-Boot] [PATCH resend 1/2] ARM: Add workaround for Cortex-A9 errata 845369   Peng Fan
  • [U-Boot] [PATCH resend 1/2] ARM: Add workaround for Cortex-A9 errata 845369   Peng Fan
  • [U-Boot] [PATCH resend 2/2] imx: mx6: Enable ARM errata workaround for 845369   Peng Fan
• [U-Boot] [PATCH] net/eth: fix a bug in on_ethaddr()   Gong Qianyu
• [U-Boot] [PATCH] include: configs: Enable DWC3 and DFU in OMAP5 uEVM   Kishon Vijay Abraham I
  • [U-Boot] [PATCH] include: configs: Enable DWC3 and DFU in OMAP5 uEVM   Sekhar Nori
    • [U-Boot] [PATCH] include: configs: Enable DWC3 and DFU in OMAP5 uEVM   Tom Rini
• [U-Boot] [PATCH 0/8] x86: quark: Convert to driver model   Bin Meng
  • [U-Boot] [PATCH 1/8] x86: quark: Make host bridge (b.d.f=0.0.0) visible   Bin Meng
  • [U-Boot] [PATCH 2/8] dm: pci: Allow skipping device configuration   Bin Meng
    • [U-Boot] [PATCH 2/8] dm: pci: Allow skipping device configuration   Simon Glass
      • [U-Boot] [PATCH 2/8] dm: pci: Allow skipping device configuration   Bin Meng
  • [U-Boot] [PATCH 3/8] x86: Convert to use driver model pci on quark/galileo   Bin Meng
  • [U-Boot] [PATCH 4/8] x86: galileo: Convert to use CONFIG_DM_USB   Bin Meng
  • [U-Boot] [PATCH 5/8] net: designware: Fix build warnings   Bin Meng
  • [U-Boot] [PATCH 6/8] net: designware: Add support to PCI designware devices   Bin Meng
  • [U-Boot] [PATCH 7/8] x86: Convert to use driver model eth on quark/galileo   Bin Meng
  • [U-Boot] [PATCH 8/8] x86: quark: Optimize MRC execution time   Bin Meng
    • [U-Boot] [PATCH 8/8] x86: quark: Optimize MRC execution time   Simon Glass
      • [U-Boot] [PATCH 8/8] x86: quark: Optimize MRC execution time   Bin Meng
      • [U-Boot] [PATCH 8/8] x86: quark: Optimize MRC execution time   Simon Glass
      • [U-Boot] [PATCH 8/8] x86: quark: Optimize MRC execution time   Bin Meng
• [U-Boot] [PATCH] dts: do not cut down pinctrl-0 and pinctrl-names for SPL full-pinctrl   Masahiro Yamada
  • [U-Boot] [PATCH] dts: do not cut down pinctrl-0 and pinctrl-names for SPL full-pinctrl   Simon Glass
• [U-Boot] TFTP Timeout Interval problem   Gong Q.Y.
  • [U-Boot] TFTP Timeout Interval problem   Pavel Machek
  • [U-Boot] TFTP Timeout Interval problem   Bin Meng
• [U-Boot] [PATCH 00/13] Implement fastboot over NAND   Maxime Ripard
  • [U-Boot] [PATCH 01/13] mtd: uboot: Add meaningful error message   Maxime Ripard
  • [U-Boot] [PATCH 03/13] sparse: Refactor chunk parsing function   Maxime Ripard
  • [U-Boot] [PATCH 04/13] sparse: Simplify multiple logic   Maxime Ripard
  • [U-Boot] [PATCH 05/13] sparse: Implement storage abstraction   Maxime Ripard
  • [U-Boot] [PATCH 06/13] fastboot: Move fastboot response functions to fastboot core   Maxime Ripard
  • [U-Boot] [PATCH 07/13] fastboot: Implement NAND backend   Maxime Ripard
  • [U-Boot] [PATCH 08/13] fastboot: nand: Add pre erase and write hooks   Maxime Ripard
  • [U-Boot] [PATCH 09/13] sparse: Rename the file and header   Maxime Ripard
  • [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Maxime Ripard
    • [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Hans de Goede
      • [U-Boot] [PATCH 10/13] sunxi: Make the fastboot buffer larger   Rob Herring
  • [U-Boot] [PATCH 11/13] sunxi: Add support for android boot image   Maxime Ripard
  • [U-Boot] [PATCH 12/13] sunxi: A13-Olinuxino: Enable the USB OTG controller   Maxime Ripard
  • [U-Boot] [PATCH 13/13] sunxi: cubietruck: Enable the USB OTG controller   Maxime Ripard
• [U-Boot] [PATCH 02/13] sparse: Move main header parsing to a function of its own   Maxime Ripard
• [U-Boot] [PATCH] sunxi_nand_spl: Be smarter about where to look for backup u-boot.bin   Hans de Goede
• [U-Boot] [PATCH v2 0/3] ubifs: Add generic fs support   Hans de Goede
  • [U-Boot] [PATCH v2 1/3] ubifs: Modify ubifs u-boot wrapper function prototypes for generic fs use   Hans de Goede
  • [U-Boot] [PATCH v2 2/3] ubifs: Add functions for generic fs use   Hans de Goede
  • [U-Boot] [PATCH v2 3/3] ubifs: Add generic fs support   Hans de Goede
• [U-Boot] [PATCH] arm: socfpga: Add support for the Terasic DE-0 Atlas board   dinguyen at opensource.altera.com
• [U-Boot] [PATCH] tools/kwboot.c: Support UART fallback mode   Kevin Smith