[U-Boot] [RFC PATCH 28/28] powerpc: remove sbc8641d support
Masahiro Yamada
yamada.masahiro at socionext.com
Thu Aug 13 12:15:46 CEST 2015
This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
arch/powerpc/cpu/mpc86xx/Kconfig | 4 -
board/sbc8641d/Kconfig | 9 -
board/sbc8641d/MAINTAINERS | 6 -
board/sbc8641d/Makefile | 10 -
board/sbc8641d/README | 28 --
board/sbc8641d/ddr.c | 56 ----
board/sbc8641d/law.c | 40 ---
board/sbc8641d/sbc8641d.c | 261 -----------------
configs/sbc8641d_defconfig | 4 -
include/configs/sbc8641d.h | 590 ---------------------------------------
10 files changed, 1008 deletions(-)
delete mode 100644 board/sbc8641d/Kconfig
delete mode 100644 board/sbc8641d/MAINTAINERS
delete mode 100644 board/sbc8641d/Makefile
delete mode 100644 board/sbc8641d/README
delete mode 100644 board/sbc8641d/ddr.c
delete mode 100644 board/sbc8641d/law.c
delete mode 100644 board/sbc8641d/sbc8641d.c
delete mode 100644 configs/sbc8641d_defconfig
delete mode 100644 include/configs/sbc8641d.h
diff --git a/arch/powerpc/cpu/mpc86xx/Kconfig b/arch/powerpc/cpu/mpc86xx/Kconfig
index 46d15e2..0dcee70 100644
--- a/arch/powerpc/cpu/mpc86xx/Kconfig
+++ b/arch/powerpc/cpu/mpc86xx/Kconfig
@@ -8,9 +8,6 @@ choice
prompt "Target select"
optional
-config TARGET_SBC8641D
- bool "Support sbc8641d"
-
config TARGET_MPC8641HPCN
bool "Support MPC8641HPCN"
@@ -20,7 +17,6 @@ config TARGET_XPEDITE517X
endchoice
source "board/freescale/mpc8641hpcn/Kconfig"
-source "board/sbc8641d/Kconfig"
source "board/xes/xpedite517x/Kconfig"
endmenu
diff --git a/board/sbc8641d/Kconfig b/board/sbc8641d/Kconfig
deleted file mode 100644
index 8dfc90c..0000000
--- a/board/sbc8641d/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_SBC8641D
-
-config SYS_BOARD
- default "sbc8641d"
-
-config SYS_CONFIG_NAME
- default "sbc8641d"
-
-endif
diff --git a/board/sbc8641d/MAINTAINERS b/board/sbc8641d/MAINTAINERS
deleted file mode 100644
index a50b541..0000000
--- a/board/sbc8641d/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-SBC8641D BOARD
-M: Paul Gortmaker <paul.gortmaker at windriver.com>
-S: Maintained
-F: board/sbc8641d/
-F: include/configs/sbc8641d.h
-F: configs/sbc8641d_defconfig
diff --git a/board/sbc8641d/Makefile b/board/sbc8641d/Makefile
deleted file mode 100644
index a9b2026..0000000
--- a/board/sbc8641d/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += sbc8641d.o
-obj-y += law.o
-obj-$(CONFIG_SYS_FSL_DDR2) += ddr.o
diff --git a/board/sbc8641d/README b/board/sbc8641d/README
deleted file mode 100644
index a051466..0000000
--- a/board/sbc8641d/README
+++ /dev/null
@@ -1,28 +0,0 @@
-Wind River SBC8641D reference board
-===========================
-
-Created 06/14/2007 Joe Hamman
-Copyright 2007, Embedded Specialties, Inc.
-Copyright 2007 Wind River Systemes, Inc.
------------------------------
-
-1. Building U-Boot
-------------------
-The SBC8641D code is known to build using ELDK 4.1.
-
- $ make sbc8641d_config
- Configuring for sbc8641d board...
-
- $ make
-
-
-2. Switch and Jumper Settings
------------------------------
-All Jumpers & Switches are in their default positions. Please refer to
-the board documentation for details. Some settings control CPU voltages
-and settings may change with board revisions.
-
-3. Known limitations
---------------------
-PCI:
- The PCI command may hang if no boards are present in either slot.
diff --git a/board/sbc8641d/ddr.c b/board/sbc8641d/ddr.c
deleted file mode 100644
index b31ea34..0000000
--- a/board/sbc8641d/ddr.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-
-#include <fsl_ddr_sdram.h>
-#include <fsl_ddr_dimm_params.h>
-
-void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- /*
- * Factors to consider for clock adjust:
- * - number of chips on bus
- * - position of slot
- * - DDR1 vs. DDR2?
- * - ???
- *
- * This needs to be determined on a board-by-board basis.
- * 0110 3/4 cycle late
- * 0111 7/8 cycle late
- */
- popts->clk_adjust = 7;
-
- /*
- * Factors to consider for CPO:
- * - frequency
- * - ddr1 vs. ddr2
- */
- popts->cpo_override = 10;
-
- /*
- * Factors to consider for write data delay:
- * - number of DIMMs
- *
- * 1 = 1/4 clock delay
- * 2 = 1/2 clock delay
- * 3 = 3/4 clock delay
- * 4 = 1 clock delay
- * 5 = 5/4 clock delay
- * 6 = 3/2 clock delay
- */
- popts->write_data_delay = 3;
-
- /*
- * Factors to consider for half-strength driver enable:
- * - number of DIMMs installed
- */
- popts->half_strength_driver_enable = 0;
-}
diff --git a/board/sbc8641d/law.c b/board/sbc8641d/law.c
deleted file mode 100644
index c4e736b..0000000
--- a/board/sbc8641d/law.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/*
- * LAW (Local Access Window) configuration:
- *
- * 0x0000_0000 DDR 256M
- * 0x1000_0000 DDR2 256M
- * 0x8000_0000 PCIE1 MEM 512M
- * 0xa000_0000 PCIE2 MEM 512M
- * 0xc000_0000 RapidIO 512M
- * 0xe200_0000 PCIE1 IO 16M
- * 0xe300_0000 PCIE2 IO 16M
- * 0xf800_0000 CCSRBAR 2M
- * 0xfe00_0000 FLASH (boot bank) 32M
- *
- */
-
-
-struct law_entry law_table[] = {
-#if !defined(CONFIG_SPD_EEPROM)
- SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR_1),
- SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
- LAW_SIZE_256M, LAW_TRGT_IF_DDR_2),
-#endif
- SET_LAW(0xf8000000, LAW_SIZE_2M, LAW_TRGT_IF_LBC),
- SET_LAW(0xfe000000, LAW_SIZE_32M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/sbc8641d/sbc8641d.c b/board/sbc8641d/sbc8641d.c
deleted file mode 100644
index 6bdf1a2..0000000
--- a/board/sbc8641d/sbc8641d.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * Copyright 2007 Wind River Systemes, Inc. <www.windriver.com>
- * Copyright 2007 Embedded Specialties, Inc.
- * Joe Hamman joe.hamman at embeddedspecialties.com
- *
- * Copyright 2004 Freescale Semiconductor.
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan at freescale.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt at artesyncp.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <asm/immap_86xx.h>
-#include <asm/fsl_pci.h>
-#include <fsl_ddr_sdram.h>
-#include <asm/fsl_serdes.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-long int fixed_sdram (void);
-
-int board_early_init_f (void)
-{
- return 0;
-}
-
-int checkboard (void)
-{
- puts ("Board: Wind River SBC8641D\n");
-
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- long dram_size = 0;
-
-#if defined(CONFIG_SPD_EEPROM)
- dram_size = fsl_ddr_sdram();
-#else
- dram_size = fixed_sdram ();
-#endif
-
- debug (" DDR: ");
- return dram_size;
-}
-
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram (void)
-{
- uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
- uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
- uint *p;
-
- puts ("SDRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- puts ("SDRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- puts ("SDRAM test passed.\n");
- return 0;
-}
-#endif
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-long int fixed_sdram (void)
-{
-#if !defined(CONFIG_SYS_RAMBOOT)
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile struct ccsr_ddr *ddr = &immap->im_ddr1;
-
- ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
- ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
- ddr->cs2_bnds = CONFIG_SYS_DDR_CS2_BNDS;
- ddr->cs3_bnds = CONFIG_SYS_DDR_CS3_BNDS;
- ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
- ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG;
- ddr->cs2_config = CONFIG_SYS_DDR_CS2_CONFIG;
- ddr->cs3_config = CONFIG_SYS_DDR_CS3_CONFIG;
- ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
- ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
- ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
- ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
- ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1A;
- ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2;
- ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
- ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
- ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTL;
- ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
- ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
- ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
-
- asm ("sync;isync");
-
- udelay (500);
-
- ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1B;
- asm ("sync; isync");
-
- udelay (500);
- ddr = &immap->im_ddr2;
-
- ddr->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS;
- ddr->cs1_bnds = CONFIG_SYS_DDR2_CS1_BNDS;
- ddr->cs2_bnds = CONFIG_SYS_DDR2_CS2_BNDS;
- ddr->cs3_bnds = CONFIG_SYS_DDR2_CS3_BNDS;
- ddr->cs0_config = CONFIG_SYS_DDR2_CS0_CONFIG;
- ddr->cs1_config = CONFIG_SYS_DDR2_CS1_CONFIG;
- ddr->cs2_config = CONFIG_SYS_DDR2_CS2_CONFIG;
- ddr->cs3_config = CONFIG_SYS_DDR2_CS3_CONFIG;
- ddr->timing_cfg_3 = CONFIG_SYS_DDR2_EXT_REFRESH;
- ddr->timing_cfg_0 = CONFIG_SYS_DDR2_TIMING_0;
- ddr->timing_cfg_1 = CONFIG_SYS_DDR2_TIMING_1;
- ddr->timing_cfg_2 = CONFIG_SYS_DDR2_TIMING_2;
- ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1A;
- ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2;
- ddr->sdram_mode = CONFIG_SYS_DDR2_MODE_1;
- ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2;
- ddr->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTL;
- ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL;
- ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT;
- ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL;
-
- asm ("sync;isync");
-
- udelay (500);
-
- ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1B;
- asm ("sync; isync");
-
- udelay (500);
-#endif
- return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-}
-#endif /* !defined(CONFIG_SPD_EEPROM) */
-
-#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-void pci_init_board(void)
-{
- fsl_pcie_init_board(0);
-}
-#endif /* CONFIG_PCI */
-
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
- ft_cpu_setup(blob, bd);
-
- FT_FSL_PCI_SETUP;
-
- return 0;
-}
-#endif
-
-void sbc8641d_reset_board (void)
-{
- puts ("Resetting board....\n");
-}
-
-/*
- * get_board_sys_clk
- * Clock is fixed at 1GHz on this board. Used for CONFIG_SYS_CLK_FREQ
- */
-
-unsigned long get_board_sys_clk (ulong dummy)
-{
- int i;
- ulong val = 0;
-
- i = 5;
- i &= 0x07;
-
- switch (i) {
- case 0:
- val = 33000000;
- break;
- case 1:
- val = 40000000;
- break;
- case 2:
- val = 50000000;
- break;
- case 3:
- val = 66000000;
- break;
- case 4:
- val = 83000000;
- break;
- case 5:
- val = 100000000;
- break;
- case 6:
- val = 134000000;
- break;
- case 7:
- val = 166000000;
- break;
- }
-
- return val;
-}
-
-void board_reset(void)
-{
-#ifdef CONFIG_SYS_RESET_ADDRESS
- ulong addr = CONFIG_SYS_RESET_ADDRESS;
-
- /* flush and disable I/D cache */
- __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3");
- __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5");
- __asm__ __volatile__ ("ori 4, 3, 0xc00" ::: "r4");
- __asm__ __volatile__ ("andc 5, 3, 5" ::: "r5");
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("mtspr 1008, 4");
- __asm__ __volatile__ ("isync");
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("mtspr 1008, 5");
- __asm__ __volatile__ ("isync");
- __asm__ __volatile__ ("sync");
-
- /*
- * SRR0 has system reset vector, SRR1 has default MSR value
- * rfi restores MSR from SRR1 and sets the PC to the SRR0 value
- */
- __asm__ __volatile__ ("mtspr 26, %0" :: "r" (addr));
- __asm__ __volatile__ ("li 4, (1 << 6)" ::: "r4");
- __asm__ __volatile__ ("mtspr 27, 4");
- __asm__ __volatile__ ("rfi");
-#endif
-}
diff --git a/configs/sbc8641d_defconfig b/configs/sbc8641d_defconfig
deleted file mode 100644
index b67c7c0..0000000
--- a/configs/sbc8641d_defconfig
+++ /dev/null
@@ -1,4 +0,0 @@
-CONFIG_PPC=y
-CONFIG_MPC86xx=y
-CONFIG_TARGET_SBC8641D=y
-# CONFIG_CMD_SETEXPR is not set
diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h
deleted file mode 100644
index 00aab6b..0000000
--- a/include/configs/sbc8641d.h
+++ /dev/null
@@ -1,590 +0,0 @@
-/*
- * Copyright 2007 Wind River Systems <www.windriver.com>
- * Copyright 2007 Embedded Specialties, Inc.
- * Joe Hamman <joe.hamman at embeddedspecialties.com>
- *
- * Copyright 2006 Freescale Semiconductor.
- *
- * Srikanth Srinivasan (srikanth.srinivasan at freescale.com)
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/*
- * SBC8641D board configuration file
- *
- * Make sure you change the MAC address and other network params first,
- * search for CONFIG_SERVERIP, etc in this file.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* High Level Configuration Options */
-#define CONFIG_MPC8641 1 /* MPC8641 specific */
-#define CONFIG_SBC8641D 1 /* SBC8641D board specific */
-#define CONFIG_MP 1 /* support multiple processors */
-#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */
-
-#define CONFIG_SYS_TEXT_BASE 0xfff00000
-
-#ifdef RUN_DIAG
-#define CONFIG_SYS_DIAG_ADDR 0xff800000
-#endif
-
-#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
-
-/*
- * virtual address to be used for temporary mappings. There
- * should be 128k free at this VA.
- */
-#define CONFIG_SYS_SCRATCH_VA 0xe8000000
-
-#define CONFIG_SYS_SRIO
-#define CONFIG_SRIO1 /* SRIO port 1 */
-
-#define CONFIG_PCI 1 /* Enable PCIE */
-#define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */
-#define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */
-#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
-#define CONFIG_PCI_INDIRECT_BRIDGE 1 /* indirect PCI bridge support */
-#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
-
-#define CONFIG_TSEC_ENET /* tsec ethernet support */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAT_RW 1 /* Use common BAT rw code */
-#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */
-
-#undef CONFIG_SPD_EEPROM /* Do not use SPD EEPROM for DDR setup*/
-#undef CONFIG_DDR_ECC /* only for ECC DDR module */
-#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
-#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
-#define CONFIG_NUM_DDR_CONTROLLERS 2
-#define CACHE_LINE_INTERLEAVING 0x20000000
-#define PAGE_INTERLEAVING 0x21000000
-#define BANK_INTERLEAVING 0x22000000
-#define SUPER_BANK_INTERLEAVING 0x23000000
-
-
-#define CONFIG_ALTIVEC 1
-
-/*
- * L2CR setup -- make sure this is right for your board!
- */
-#define CONFIG_SYS_L2
-#define L2_INIT 0
-#define L2_ENABLE (L2CR_L2E)
-
-#ifndef CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
-#endif
-
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
-
-#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
-#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
-#define CONFIG_SYS_MEMTEST_END 0x00400000
-
-/*
- * Base addresses -- Note these are effective addresses where the
- * actual resources get mapped (not physical addresses)
- */
-#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
-#define CONFIG_SYS_CCSRBAR 0xf8000000 /* relocated CCSRBAR */
-#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */
-
-#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
-#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0
-#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR_PHYS_LOW
-
-/*
- * DDR Setup
- */
-#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory */
-#define CONFIG_SYS_DDR_SDRAM_BASE2 0x10000000 /* DDR bank 2 */
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_BASE2 CONFIG_SYS_DDR_SDRAM_BASE2
-#define CONFIG_SYS_MAX_DDR_BAT_SIZE 0x80000000 /* BAT mapping size */
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_NUM_DDR_CONTROLLERS 2
-#define CONFIG_DIMM_SLOTS_PER_CTLR 2
-#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
-
-#if defined(CONFIG_SPD_EEPROM)
- /*
- * Determine DDR configuration from I2C interface.
- */
- #define SPD_EEPROM_ADDRESS1 0x51 /* DDR DIMM */
- #define SPD_EEPROM_ADDRESS2 0x52 /* DDR DIMM */
- #define SPD_EEPROM_ADDRESS3 0x53 /* DDR DIMM */
- #define SPD_EEPROM_ADDRESS4 0x54 /* DDR DIMM */
-
-#else
- /*
- * Manually set up DDR1 & DDR2 parameters
- */
-
- #define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */
-
- #define CONFIG_SYS_DDR_CS0_BNDS 0x0000000F
- #define CONFIG_SYS_DDR_CS1_BNDS 0x00000000
- #define CONFIG_SYS_DDR_CS2_BNDS 0x00000000
- #define CONFIG_SYS_DDR_CS3_BNDS 0x00000000
- #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102
- #define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000
- #define CONFIG_SYS_DDR_CS2_CONFIG 0x00000000
- #define CONFIG_SYS_DDR_CS3_CONFIG 0x00000000
- #define CONFIG_SYS_DDR_TIMING_3 0x00000000
- #define CONFIG_SYS_DDR_TIMING_0 0x00220802
- #define CONFIG_SYS_DDR_TIMING_1 0x38377322
- #define CONFIG_SYS_DDR_TIMING_2 0x002040c7
- #define CONFIG_SYS_DDR_CFG_1A 0x43008008
- #define CONFIG_SYS_DDR_CFG_2 0x24401000
- #define CONFIG_SYS_DDR_MODE_1 0x23c00542
- #define CONFIG_SYS_DDR_MODE_2 0x00000000
- #define CONFIG_SYS_DDR_MODE_CTL 0x00000000
- #define CONFIG_SYS_DDR_INTERVAL 0x05080100
- #define CONFIG_SYS_DDR_DATA_INIT 0x00000000
- #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000
- #define CONFIG_SYS_DDR_CFG_1B 0xC3008008
-
- #define CONFIG_SYS_DDR2_CS0_BNDS 0x0010001F
- #define CONFIG_SYS_DDR2_CS1_BNDS 0x00000000
- #define CONFIG_SYS_DDR2_CS2_BNDS 0x00000000
- #define CONFIG_SYS_DDR2_CS3_BNDS 0x00000000
- #define CONFIG_SYS_DDR2_CS0_CONFIG 0x80010102
- #define CONFIG_SYS_DDR2_CS1_CONFIG 0x00000000
- #define CONFIG_SYS_DDR2_CS2_CONFIG 0x00000000
- #define CONFIG_SYS_DDR2_CS3_CONFIG 0x00000000
- #define CONFIG_SYS_DDR2_EXT_REFRESH 0x00000000
- #define CONFIG_SYS_DDR2_TIMING_0 0x00220802
- #define CONFIG_SYS_DDR2_TIMING_1 0x38377322
- #define CONFIG_SYS_DDR2_TIMING_2 0x002040c7
- #define CONFIG_SYS_DDR2_CFG_1A 0x43008008
- #define CONFIG_SYS_DDR2_CFG_2 0x24401000
- #define CONFIG_SYS_DDR2_MODE_1 0x23c00542
- #define CONFIG_SYS_DDR2_MODE_2 0x00000000
- #define CONFIG_SYS_DDR2_MODE_CTL 0x00000000
- #define CONFIG_SYS_DDR2_INTERVAL 0x05080100
- #define CONFIG_SYS_DDR2_DATA_INIT 0x00000000
- #define CONFIG_SYS_DDR2_CLK_CTRL 0x03800000
- #define CONFIG_SYS_DDR2_CFG_1B 0xC3008008
-
-
-#endif
-
-/* #define CONFIG_ID_EEPROM 1
-#define ID_EEPROM_ADDR 0x57 */
-
-/*
- * The SBC8641D contains 16MB flash space at ff000000.
- */
-#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 16M */
-
-/* Flash */
-#define CONFIG_SYS_BR0_PRELIM 0xff001001 /* port size 16bit */
-#define CONFIG_SYS_OR0_PRELIM 0xff006e65 /* 16MB Boot Flash area */
-
-/* 64KB EEPROM */
-#define CONFIG_SYS_BR1_PRELIM 0xf0000801 /* port size 16bit */
-#define CONFIG_SYS_OR1_PRELIM 0xffff6e65 /* 64K EEPROM area */
-
-/* EPLD - User switches, board id, LEDs */
-#define CONFIG_SYS_BR2_PRELIM 0xf1000801 /* port size 16bit */
-#define CONFIG_SYS_OR2_PRELIM 0xfff06e65 /* EPLD (switches, board ID, LEDs) area */
-
-/* Local bus SDRAM 128MB */
-#define CONFIG_SYS_BR3_PRELIM 0xe0001861 /* port size ?bit */
-#define CONFIG_SYS_OR3_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (1st half) */
-#define CONFIG_SYS_BR4_PRELIM 0xe4001861 /* port size ?bit */
-#define CONFIG_SYS_OR4_PRELIM 0xfc006cc0 /* 128MB local bus SDRAM area (2nd half) */
-
-/* Disk on Chip (DOC) 128MB */
-#define CONFIG_SYS_BR5_PRELIM 0xe8001001 /* port size ?bit */
-#define CONFIG_SYS_OR5_PRELIM 0xf8006e65 /* 128MB local bus SDRAM area (2nd half) */
-
-/* LCD */
-#define CONFIG_SYS_BR6_PRELIM 0xf4000801 /* port size ?bit */
-#define CONFIG_SYS_OR6_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */
-
-/* Control logic & misc peripherals */
-#define CONFIG_SYS_BR7_PRELIM 0xf2000801 /* port size ?bit */
-#define CONFIG_SYS_OR7_PRELIM 0xfff06e65 /* 128MB local bus SDRAM area (2nd half) */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 131 /* sectors per device */
-
-#undef CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
-#define CONFIG_SYS_MONITOR_BASE_EARLY 0xfff00000 /* early monitor loc */
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_SYS_WRITE_SWAPPED_DATA
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_PROTECTION
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-#define CONFIG_SYS_INIT_RAM_LOCK 1
-#ifndef CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */
-#else
-#define CONFIG_SYS_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */
-#endif
-#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
-
-/* Serial Port */
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
-
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
-#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-#ifdef CONFIG_SYS_HUSH_PARSER
-#endif
-
-/*
- * Pass open firmware flat tree to kernel
- */
-#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP 1
-#define CONFIG_OF_STDOUT_VIA_ALIAS 1
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_FSL_I2C_SPEED 400000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x3100
-#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }
-
-/*
- * RapidIO MMU
- */
-#define CONFIG_SYS_SRIO1_MEM_BASE 0xc0000000 /* base address */
-#define CONFIG_SYS_SRIO1_MEM_PHYS CONFIG_SYS_SRIO1_MEM_BASE
-#define CONFIG_SYS_SRIO1_MEM_SIZE 0x20000000 /* 128M */
-
-/*
- * General PCI
- * Addresses are mapped 1-1.
- */
-#define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000
-#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BUS
-#define CONFIG_SYS_PCIE1_MEM_VIRT CONFIG_SYS_PCIE1_MEM_BUS
-#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
-#define CONFIG_SYS_PCIE1_IO_BUS 0xe2000000
-#define CONFIG_SYS_PCIE1_IO_PHYS CONFIG_SYS_PCIE1_IO_BUS
-#define CONFIG_SYS_PCIE1_IO_VIRT CONFIG_SYS_PCIE1_IO_BUS
-#define CONFIG_SYS_PCIE1_IO_SIZE 0x1000000 /* 16M */
-
-#define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
-#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BUS
-#define CONFIG_SYS_PCIE2_MEM_VIRT CONFIG_SYS_PCIE2_MEM_BUS
-#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */
-#define CONFIG_SYS_PCIE2_IO_BUS 0xe3000000
-#define CONFIG_SYS_PCIE2_IO_PHYS CONFIG_SYS_PCIE2_IO_BUS
-#define CONFIG_SYS_PCIE2_IO_VIRT CONFIG_SYS_PCIE2_IO_BUS
-#define CONFIG_SYS_PCIE2_IO_SIZE 0x1000000 /* 16M */
-
-#if defined(CONFIG_PCI)
-
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-
-#undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
-
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
-
-#undef CONFIG_EEPRO100
-#undef CONFIG_TULIP
-
-#if !defined(CONFIG_PCI_PNP)
- #define PCI_ENET0_IOADDR 0xe0000000
- #define PCI_ENET0_MEMADDR 0xe0000000
- #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
-#endif
-
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-
-#define CONFIG_DOS_PARTITION
-#undef CONFIG_SCSI_AHCI
-
-#ifdef CONFIG_SCSI_AHCI
-#define CONFIG_SATA_ULI5288
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID 4
-#define CONFIG_SYS_SCSI_MAX_LUN 1
-#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE
-#endif
-
-#endif /* CONFIG_PCI */
-
-#if defined(CONFIG_TSEC_ENET)
-
-/* #define CONFIG_MII 1 */ /* MII PHY management */
-
-#define CONFIG_TSEC1 1
-#define CONFIG_TSEC1_NAME "eTSEC1"
-#define CONFIG_TSEC2 1
-#define CONFIG_TSEC2_NAME "eTSEC2"
-#define CONFIG_TSEC3 1
-#define CONFIG_TSEC3_NAME "eTSEC3"
-#define CONFIG_TSEC4 1
-#define CONFIG_TSEC4_NAME "eTSEC4"
-
-#define TSEC1_PHY_ADDR 0x1F
-#define TSEC2_PHY_ADDR 0x00
-#define TSEC3_PHY_ADDR 0x01
-#define TSEC4_PHY_ADDR 0x02
-#define TSEC1_PHYIDX 0
-#define TSEC2_PHYIDX 0
-#define TSEC3_PHYIDX 0
-#define TSEC4_PHYIDX 0
-#define TSEC1_FLAGS TSEC_GIGABIT
-#define TSEC2_FLAGS TSEC_GIGABIT
-#define TSEC3_FLAGS TSEC_GIGABIT
-#define TSEC4_FLAGS TSEC_GIGABIT
-
-#define CONFIG_SYS_TBIPA_VALUE 0x1e /* Set TBI address not to conflict with TSEC1_PHY_ADDR */
-
-#define CONFIG_ETHPRIME "eTSEC1"
-
-#endif /* CONFIG_TSEC_ENET */
-
-/*
- * BAT0 2G Cacheable, non-guarded
- * 0x0000_0000 2G DDR
- */
-#define CONFIG_SYS_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE )
-#define CONFIG_SYS_IBAT0U CONFIG_SYS_DBAT0U
-
-/*
- * BAT1 1G Cache-inhibited, guarded
- * 0x8000_0000 512M PCI-Express 1 Memory
- * 0xa000_0000 512M PCI-Express 2 Memory
- * Changed it for operating from 0xd0000000
- */
-#define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW \
- | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCIE1_MEM_VIRT | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCIE1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U
-
-/*
- * BAT2 512M Cache-inhibited, guarded
- * 0xc000_0000 512M RapidIO Memory
- */
-#define CONFIG_SYS_DBAT2L (CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW \
- | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT2U (CONFIG_SYS_SRIO1_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT2L (CONFIG_SYS_SRIO1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
-
-/*
- * BAT3 4M Cache-inhibited, guarded
- * 0xf800_0000 4M CCSR
- */
-#define CONFIG_SYS_DBAT3L ( CONFIG_SYS_CCSRBAR | BATL_PP_RW \
- | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U
-
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
-#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
- | BATL_PP_RW | BATL_CACHEINHIBIT \
- | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT \
- | BATU_BL_1M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT \
- | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU
-#endif
-
-/*
- * BAT4 32M Cache-inhibited, guarded
- * 0xe200_0000 16M PCI-Express 1 I/O
- * 0xe300_0000 16M PCI-Express 2 I/0
- * Note that this is at 0xe0000000
- */
-#define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW \
- | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_VIRT | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCIE1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U
-
-/*
- * BAT5 128K Cacheable, non-guarded
- * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory)
- */
-#define CONFIG_SYS_DBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_DBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT5L CONFIG_SYS_DBAT5L
-#define CONFIG_SYS_IBAT5U CONFIG_SYS_DBAT5U
-
-/*
- * BAT6 32M Cache-inhibited, guarded
- * 0xfe00_0000 32M FLASH
- */
-#define CONFIG_SYS_DBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW \
- | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT6U CONFIG_SYS_DBAT6U
-
-/* Map the last 1M of flash where we're running from reset */
-#define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
- | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
-#define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
- | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY
-
-#define CONFIG_SYS_DBAT7L 0x00000000
-#define CONFIG_SYS_DBAT7U 0x00000000
-#define CONFIG_SYS_IBAT7L 0x00000000
-#define CONFIG_SYS_IBAT7U 0x00000000
-
-/*
- * Environment
- */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
-#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
-#define CONFIG_ENV_SIZE 0x2000
-
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
- #define CONFIG_CMD_PCI
-#endif
-
-#undef CONFIG_WATCHDOG /* watchdog disabled */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-
-#if defined(CONFIG_CMD_KGDB)
- #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#else
- #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#endif
-
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
-
-/* Cache Configuration */
-#define CONFIG_SYS_DCACHE_SIZE 32768
-#define CONFIG_SYS_CACHELINE_SIZE 32
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT 5 /*log base 2 of the above value*/
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
-#endif
-
-/*
- * Environment Configuration
- */
-
-#define CONFIG_HAS_ETH0 1
-#define CONFIG_HAS_ETH1 1
-#define CONFIG_HAS_ETH2 1
-#define CONFIG_HAS_ETH3 1
-
-#define CONFIG_IPADDR 192.168.0.50
-
-#define CONFIG_HOSTNAME sbc8641d
-#define CONFIG_ROOTPATH "/opt/eldk/ppc_74xx"
-#define CONFIG_BOOTFILE "uImage"
-
-#define CONFIG_SERVERIP 192.168.0.2
-#define CONFIG_GATEWAYIP 192.168.0.1
-#define CONFIG_NETMASK 255.255.255.0
-
-/* default location for tftp and bootm */
-#define CONFIG_LOADADDR 1000000
-
-#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "consoledev=ttyS0\0" \
- "ramdiskaddr=2000000\0" \
- "ramdiskfile=uRamdisk\0" \
- "dtbaddr=400000\0" \
- "dtbfile=sbc8641d.dtb\0" \
- "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \
- "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \
- "maxcpus=1"
-
-#define CONFIG_NFSBOOTCOMMAND \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=$serverip:$rootpath " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $dtbaddr $dtbfile;" \
- "bootm $loadaddr - $dtbaddr"
-
-#define CONFIG_RAMBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "tftp $ramdiskaddr $ramdiskfile;" \
- "tftp $loadaddr $bootfile;" \
- "tftp $dtbaddr $dtbfile;" \
- "bootm $loadaddr $ramdiskaddr $dtbaddr"
-
-#define CONFIG_FLASHBOOTCOMMAND \
- "setenv bootargs root=/dev/ram rw " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
- "console=$consoledev,$baudrate $othbootargs;" \
- "bootm ffd00000 ffb00000 ffa00000"
-
-#define CONFIG_BOOTCOMMAND CONFIG_FLASHBOOTCOMMAND
-
-#endif /* __CONFIG_H */
--
1.9.1
More information about the U-Boot
mailing list