[U-Boot] [PATCH V2 3/6] power: regulator: update comments for regulator-name
Peng Fan
b51431 at freescale.com
Tue Aug 4 15:12:15 CEST 2015
Hello Przemyslaw,
On Tue, Aug 04, 2015 at 03:10:22PM +0200, Przemyslaw Marczak wrote:
>Hello Peng,
>
>On 08/04/2015 07:32 AM, Peng Fan wrote:
>>We do not need that "regulator-name" property must be provided in dts.
>>If "regulator-name" property is not provided in dts, node name
>>will chosen for settings '.name' field of uc_pdata.
>>
>>Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
>>Cc: Przemyslaw Marczak <p.marczak at samsung.com>
>>Cc: Simon Glass <sjg at chromium.org>
>>---
>>
>>Changes v2:
>> New patch. Update comments for regulator-name property.
>>
>> doc/device-tree-bindings/regulator/regulator.txt | 19 ++++++++-----------
>> include/power/regulator.h | 8 +++++---
>> 2 files changed, 13 insertions(+), 14 deletions(-)
>>
>>diff --git a/doc/device-tree-bindings/regulator/regulator.txt b/doc/device-tree-bindings/regulator/regulator.txt
>>index 68b02a8..2cf4b9d 100644
>>--- a/doc/device-tree-bindings/regulator/regulator.txt
>>+++ b/doc/device-tree-bindings/regulator/regulator.txt
>>@@ -15,15 +15,8 @@ For the node name e.g.: "prefix[:alpha:]num { ... }":
>>
>> Example the prefix "ldo" will pass for: "ldo1", "ldo at 1", "LDO1", "LDOREG at 1"...
>>
>>-Required properties:
>>-- regulator-name: a string, required by the regulator uclass
>>-
>>-Note
>>-The "regulator-name" constraint is used for setting the device's uclass
>>-platform data '.name' field. And the regulator device name is set from
>>-it's node name.
>>-
>> Optional properties:
>>+- regulator-name: a string, required by the regulator uclass
>> - regulator-min-microvolt: a minimum allowed Voltage value
>> - regulator-max-microvolt: a maximum allowed Voltage value
>> - regulator-min-microamp: a minimum allowed Current value
>>@@ -31,6 +24,12 @@ Optional properties:
>> - regulator-always-on: regulator should never be disabled
>> - regulator-boot-on: enabled by bootloader/firmware
>>
>>+Note
>>+The "regulator-name" constraint is used for setting the device's uclass
>>+platform data '.name' field. And the regulator device name is set from
>>+it's node name. If "regulator-name" is not provided in dts, node name
>>+is chosen for setting the device's uclass platform data '.name' field.
>>+
>> Other kernel-style properties, are currently not used.
>>
>> Note:
>>@@ -41,10 +40,8 @@ For the regulator autoset from constraints, the framework expects that:
>>
>> Example:
>> ldo0 {
>>- /* Mandatory */
>>- regulator-name = "VDDQ_EMMC_1.8V";
>>-
>> /* Optional */
>>+ regulator-name = "VDDQ_EMMC_1.8V";
>> regulator-min-microvolt = <1800000>;
>> regulator-max-microvolt = <1800000>;
>> regulator-min-microamp = <100000>;
>>diff --git a/include/power/regulator.h b/include/power/regulator.h
>>index 0152290..2198664 100644
>>--- a/include/power/regulator.h
>>+++ b/include/power/regulator.h
>>@@ -34,7 +34,7 @@
>> * regulator constraints, like in the example below:
>> *
>> * ldo1 {
>
>When using node name, then it's automatically unique, otherwise not.
>So I would like to keep this information here.
Ok. Will keep "regulator-name = "VDD_MMC_1.8V" (must be unique for proper bind)"
Regards,
Peng.
>
>>- * regulator-name = "VDD_MMC_1.8V"; (must be unique for proper bind)
>>+ * regulator-name = "VDD_MMC_1.8V"; (optional)
>> * regulator-min-microvolt = <1000000>; (optional)
>> * regulator-max-microvolt = <1000000>; (optional)
>> * regulator-min-microamp = <1000>; (optional)
>>@@ -44,8 +44,10 @@
>> * };
>> *
>> * Note: For the proper operation, at least name constraint is needed, since
>>- * it can be used when calling regulator_get_by_platname(). And the mandatory
>>- * rule for this name is, that it must be globally unique for the single dts.
>>+ * it can be used when calling regulator_get_by_platname(). If regulator-name
>>+ * property is not provided, node name will be chosen for platname. And the
>>+ * mandatory rule for this name is, that it must be globally unique for the
>>+ * single dts.
>> *
>> * Regulator bind:
>> * For each regulator device, the device_bind() should be called with passed
>>
>
>Best regards,
>--
>Przemyslaw Marczak
>Samsung R&D Institute Poland
>Samsung Electronics
>p.marczak at samsung.com
--
More information about the U-Boot
mailing list