[U-Boot] [PATCH 3/5] TI PHY: Add support to control 2nd USB PHY in DRA7xx/AM57xx

Kishon Vijay Abraham I kishon at ti.com
Mon Aug 10 13:22:56 CEST 2015


Added support to power on/power off the second USB PHY present in
DRA7xx and AM57xx.

Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
---
 drivers/usb/dwc3/ti_usb_phy.c |   15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/dwc3/ti_usb_phy.c b/drivers/usb/dwc3/ti_usb_phy.c
index e6048eb..4159e5a 100644
--- a/drivers/usb/dwc3/ti_usb_phy.c
+++ b/drivers/usb/dwc3/ti_usb_phy.c
@@ -193,8 +193,11 @@ void ti_usb2_phy_power(struct ti_usb_phy *phy, int on)
 	val = readl(phy->usb2_phy_power);
 
 	if (on) {
-#ifdef CONFIG_DRA7XX
-		val &= ~OMAP_CTRL_DEV_PHY_PD;
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+		if (phy->index == 1)
+			val &= ~OMAP_CTRL_USB2_PHY_PD;
+		else
+			val &= ~OMAP_CTRL_DEV_PHY_PD;
 #elif defined(CONFIG_AM43XX)
 		val &= ~(AM437X_CTRL_USB2_PHY_PD |
 			 AM437X_CTRL_USB2_OTG_PD);
@@ -202,8 +205,12 @@ void ti_usb2_phy_power(struct ti_usb_phy *phy, int on)
 			AM437X_CTRL_USB2_OTGSESSEND_EN);
 #endif
 	} else {
-#ifdef CONFIG_DRA7XX
-		val |= OMAP_CTRL_DEV_PHY_PD;
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
+		if (phy->index == 1)
+			val |= OMAP_CTRL_USB2_PHY_PD;
+		else
+			val |= OMAP_CTRL_DEV_PHY_PD;
+
 #elif defined(CONFIG_AM43XX)
 		val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
 			 AM437X_CTRL_USB2_OTGSESSEND_EN);
-- 
1.7.9.5



More information about the U-Boot mailing list