[U-Boot] [PATCH 09/21] ARM: OMAP5: Add functions to enable and disable USB clocks
Kishon Vijay Abraham I
kishon at ti.com
Thu Aug 6 18:15:59 CEST 2015
Added functions to enable and disable USB clocks which can be invoked
during USB init and USB exit respectively.
Cc: Roger Quadros <rogerq at ti.com>
Cc: Tero Kristo <t-kristo at ti.com>
Cc: Nishanth Menon <nm at ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
---
arch/arm/cpu/armv7/omap5/hw_data.c | 97 ++++++++++++++++++++++++++++++++++++
arch/arm/include/asm/omap_common.h | 6 +++
2 files changed, 103 insertions(+)
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 11440ac..1085bb3 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -581,6 +581,103 @@ void enable_basic_uboot_clocks(void)
1);
}
+#ifdef CONFIG_USB_DWC3
+void enable_usb_clocks(int index)
+{
+ u32 cm_l3init_usb_otg_ss_clkctrl = 0;
+
+ if (index == 0) {
+ cm_l3init_usb_otg_ss_clkctrl =
+ (*prcm)->cm_l3init_usb_otg_ss1_clkctrl;
+ /* Enable 960 MHz clock for dwc3 */
+ setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
+ OPTFCLKEN_REFCLK960M);
+
+ /* Enable 32 KHz clock for dwc3 */
+ setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
+ USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+ } else if (index == 1) {
+ cm_l3init_usb_otg_ss_clkctrl =
+ (*prcm)->cm_l3init_usb_otg_ss2_clkctrl;
+ /* Enable 960 MHz clock for dwc3 */
+ setbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl,
+ OPTFCLKEN_REFCLK960M);
+
+ /* Enable 32 KHz clock for dwc3 */
+ setbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
+ USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+
+ /* Enable 60 MHz clock for USB2PHY2 */
+ setbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl,
+ L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK);
+ }
+
+ u32 const clk_domains_usb[] = {
+ 0
+ };
+
+ u32 const clk_modules_hw_auto_usb[] = {
+ (*prcm)->cm_l3init_ocp2scp1_clkctrl,
+ cm_l3init_usb_otg_ss_clkctrl,
+ 0
+ };
+
+ u32 const clk_modules_explicit_en_usb[] = {
+ 0
+ };
+
+ do_enable_clocks(clk_domains_usb,
+ clk_modules_hw_auto_usb,
+ clk_modules_explicit_en_usb,
+ 1);
+}
+
+void disable_usb_clocks(int index)
+{
+ u32 cm_l3init_usb_otg_ss_clkctrl = 0;
+
+ if (index == 0) {
+ cm_l3init_usb_otg_ss_clkctrl =
+ (*prcm)->cm_l3init_usb_otg_ss1_clkctrl;
+ /* Disable 960 MHz clock for dwc3 */
+ clrbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
+ OPTFCLKEN_REFCLK960M);
+
+ /* Disable 32 KHz clock for dwc3 */
+ clrbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
+ USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+ } else if (index == 1) {
+ cm_l3init_usb_otg_ss_clkctrl =
+ (*prcm)->cm_l3init_usb_otg_ss2_clkctrl;
+ /* Disable 960 MHz clock for dwc3 */
+ clrbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl,
+ OPTFCLKEN_REFCLK960M);
+
+ /* Disable 32 KHz clock for dwc3 */
+ clrbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
+ USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
+
+ /* Disable 60 MHz clock for USB2PHY2 */
+ clrbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl,
+ L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK);
+ }
+
+ u32 const clk_domains_usb[] = {
+ 0
+ };
+
+ u32 const clk_modules_disable[] = {
+ (*prcm)->cm_l3init_ocp2scp1_clkctrl,
+ cm_l3init_usb_otg_ss_clkctrl,
+ 0
+ };
+
+ do_disable_clocks(clk_domains_usb,
+ clk_modules_disable,
+ 1);
+}
+#endif
+
const struct ctrl_ioregs ioregs_omap5430 = {
.ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
.ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 224fbf0..527e143 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -587,6 +587,12 @@ u32 omap_ddr_clk(void);
u32 get_sys_clk_index(void);
void enable_basic_clocks(void);
void enable_basic_uboot_clocks(void);
+
+#ifdef CONFIG_USB_DWC3
+void enable_usb_clocks(int index);
+void disable_usb_clocks(int index);
+#endif
+
void scale_vcores(struct vcores_data const *);
u32 get_offset_code(u32 volt_offset, struct pmic_data *pmic);
void do_scale_vcore(u32 vcore_reg, u32 volt_mv, struct pmic_data *pmic);
--
1.7.9.5
More information about the U-Boot
mailing list