[U-Boot] [PATCH 25/45] arm: Remove otc570 board

Simon Glass sjg at chromium.org
Mon Aug 31 03:19:19 CEST 2015


This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/arm/mach-at91/Kconfig         |   5 -
 board/esd/otc570/Kconfig           |  12 --
 board/esd/otc570/MAINTAINERS       |   7 -
 board/esd/otc570/Makefile          |  13 --
 board/esd/otc570/otc570.c          | 372 -------------------------------------
 board/esd/otc570/partition.c       |  23 ---
 configs/otc570_dataflash_defconfig |   8 -
 configs/otc570_defconfig           |   8 -
 include/configs/otc570.h           | 252 -------------------------
 9 files changed, 700 deletions(-)
 delete mode 100644 board/esd/otc570/Kconfig
 delete mode 100644 board/esd/otc570/MAINTAINERS
 delete mode 100644 board/esd/otc570/Makefile
 delete mode 100644 board/esd/otc570/otc570.c
 delete mode 100644 board/esd/otc570/partition.c
 delete mode 100644 configs/otc570_dataflash_defconfig
 delete mode 100644 configs/otc570_defconfig
 delete mode 100644 include/configs/otc570.h

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index d2d60f3..f70ccbc 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -99,10 +99,6 @@ config TARGET_VL_MA2SC
 	bool "Support vl_ma2sc"
 	select CPU_ARM926EJS
 
-config TARGET_OTC570
-	bool "Support otc570"
-	select CPU_ARM926EJS
-
 config TARGET_CORVUS
 	bool "Support corvus"
 	select CPU_ARM926EJS
@@ -139,7 +135,6 @@ source "board/bluewater/snapper9260/Kconfig"
 source "board/BuS/vl_ma2sc/Kconfig"
 source "board/calao/usb_a9263/Kconfig"
 source "board/egnite/ethernut5/Kconfig"
-source "board/esd/otc570/Kconfig"
 source "board/mini-box/picosam9g45/Kconfig"
 source "board/ronetix/pm9261/Kconfig"
 source "board/ronetix/pm9263/Kconfig"
diff --git a/board/esd/otc570/Kconfig b/board/esd/otc570/Kconfig
deleted file mode 100644
index 4966f5f..0000000
--- a/board/esd/otc570/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_OTC570
-
-config SYS_BOARD
-	default "otc570"
-
-config SYS_VENDOR
-	default "esd"
-
-config SYS_CONFIG_NAME
-	default "otc570"
-
-endif
diff --git a/board/esd/otc570/MAINTAINERS b/board/esd/otc570/MAINTAINERS
deleted file mode 100644
index a7e165d..0000000
--- a/board/esd/otc570/MAINTAINERS
+++ /dev/null
@@ -1,7 +0,0 @@
-OTC570 BOARD
-M:	Daniel Gorsulowski <daniel.gorsulowski at esd.eu>
-S:	Maintained
-F:	board/esd/otc570/
-F:	include/configs/otc570.h
-F:	configs/otc570_defconfig
-F:	configs/otc570_dataflash_defconfig
diff --git a/board/esd/otc570/Makefile b/board/esd/otc570/Makefile
deleted file mode 100644
index 740bb0a..0000000
--- a/board/esd/otc570/Makefile
+++ /dev/null
@@ -1,13 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian at popies.net>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y				+= otc570.o
-obj-$(CONFIG_HAS_DATAFLASH)	+= partition.o
diff --git a/board/esd/otc570/otc570.c b/board/esd/otc570/otc570.c
deleted file mode 100644
index 4751d0a..0000000
--- a/board/esd/otc570/otc570.c
+++ /dev/null
@@ -1,372 +0,0 @@
-/*
- * (C) Copyright 2010-2011
- * Daniel Gorsulowski <daniel.gorsulowski at esd.eu>
- * esd electronic system design gmbh <www.esd.eu>
- *
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian at popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_matrix.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/clk.h>
-#include <netdev.h>
-#ifdef CONFIG_LCD
-# include <atmel_lcdc.h>
-# include <lcd.h>
-# ifdef CONFIG_LCD_INFO
-#  include <nand.h>
-#  include <version.h>
-# endif
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-static int hw_rev = -1;	/* hardware revision */
-
-int get_hw_rev(void)
-{
-	if (hw_rev >= 0)
-		return hw_rev;
-
-	hw_rev = at91_get_pio_value(AT91_PIO_PORTB, 19);
-	hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 20) << 1;
-	hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 21) << 2;
-	hw_rev |= at91_get_pio_value(AT91_PIO_PORTB, 22) << 3;
-
-	if (hw_rev == 15)
-		hw_rev = 0;
-
-	return hw_rev;
-}
-
-#ifdef CONFIG_CMD_NAND
-static void otc570_nand_hw_init(void)
-{
-	unsigned long csa;
-	at91_smc_t	*smc 	= (at91_smc_t *) ATMEL_BASE_SMC0;
-	at91_matrix_t	*matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX;
-
-	/* Enable CS3 */
-	csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
-	writel(csa, &matrix->csa[0]);
-
-	/* Configure SMC CS3 for NAND/SmartMedia */
-	writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
-		AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(2),
-		&smc->cs[3].setup);
-
-	writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
-		AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
-		&smc->cs[3].pulse);
-
-	writel(AT91_SMC_CYCLE_NWE(6) | AT91_SMC_CYCLE_NRD(6),
-		&smc->cs[3].cycle);
-	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
-		AT91_SMC_MODE_EXNW_DISABLE |
-		AT91_SMC_MODE_DBW_8 |
-		AT91_SMC_MODE_TDF_CYCLE(12),
-		&smc->cs[3].mode);
-
-	/* Configure RDY/BSY */
-	gpio_direction_input(CONFIG_SYS_NAND_READY_PIN);
-
-	/* Enable NandFlash */
-	gpio_direction_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif /* CONFIG_CMD_NAND */
-
-#ifdef CONFIG_MACB
-static void otc570_macb_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-	/* Enable clock */
-	writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
-	at91_macb_hw_init();
-}
-#endif
-
-/*
- * Static memory controller initialization to enable Beckhoff ET1100 EtherCAT
- * controller debugging
- * The ET1100 is located at physical address 0x70000000
- * Its process memory is located at physical address 0x70001000
- */
-static void otc570_ethercat_hw_init(void)
-{
-	at91_smc_t	*smc1 	= (at91_smc_t *) ATMEL_BASE_SMC1;
-
-	/* Configure SMC EBI1_CS0 for EtherCAT */
-	writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) |
-		AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0),
-		&smc1->cs[0].setup);
-	writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(9) |
-		AT91_SMC_PULSE_NRD(5) | AT91_SMC_PULSE_NCS_RD(9),
-		&smc1->cs[0].pulse);
-	writel(AT91_SMC_CYCLE_NWE(10) | AT91_SMC_CYCLE_NRD(6),
-		&smc1->cs[0].cycle);
-	/*
-	 * Configure behavior at external wait signal, byte-select mode, 16 bit
-	 * data bus width, none data float wait states and TDF optimization
-	 */
-	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_EXNW_READY |
-		AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_TDF_CYCLE(0) |
-		AT91_SMC_MODE_TDF, &smc1->cs[0].mode);
-
-	/* Configure RDY/BSY */
-	at91_set_b_periph(AT91_PIO_PORTE, 20, 0);	/* EBI1_NWAIT */
-}
-
-#ifdef CONFIG_LCD
-/* Number of columns and rows, pixel clock in Hz and hsync/vsync polarity */
-vidinfo_t panel_info = {
-	.vl_col =		640,
-	.vl_row =		480,
-	.vl_clk =		25175000,
-	.vl_sync =		ATMEL_LCDC_INVLINE_INVERTED |
-				ATMEL_LCDC_INVFRAME_INVERTED,
-
-	.vl_bpix =		LCD_BPP,/* Bits per pixel, 0 = 1bit, 3 = 8bit */
-	.vl_tft =		1,	/* 0 = passive, 1 = TFT */
-	.vl_vsync_len =		1,	/* Length of vertical sync in NOL */
-	.vl_upper_margin =	35,	/* Idle lines at the frame start */
-	.vl_lower_margin =	5,	/* Idle lines at the end of the frame */
-	.vl_hsync_len =		5,	/* Width of the LCDHSYNC pulse */
-	.vl_left_margin =	112,	/* Idle cycles at the line beginning */
-	.vl_right_margin =	1,	/* Idle cycles at the end of the line */
-
-	.mmio =			ATMEL_BASE_LCDC,
-};
-
-void lcd_enable(void)
-{
-	at91_set_pio_value(AT91_PIO_PORTA, 30, 0); /* power up */
-}
-
-void lcd_disable(void)
-{
-	at91_set_pio_value(AT91_PIO_PORTA, 30, 1); /* power down */
-}
-
-static void otc570_lcd_hw_init(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* LCDVSYNC */
-	at91_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* LCDHSYNC */
-	at91_set_a_periph(AT91_PIO_PORTC, 2, 0);	/* LCDDOTCK */
-	at91_set_a_periph(AT91_PIO_PORTC, 3, 0);	/* LCDDEN */
-	at91_set_b_periph(AT91_PIO_PORTB, 9, 0);	/* LCDCC */
-	at91_set_a_periph(AT91_PIO_PORTC, 6, 0);	/* LCDD2 */
-	at91_set_a_periph(AT91_PIO_PORTC, 7, 0);	/* LCDD3 */
-	at91_set_a_periph(AT91_PIO_PORTC, 8, 0);	/* LCDD4 */
-	at91_set_a_periph(AT91_PIO_PORTC, 9, 0);	/* LCDD5 */
-	at91_set_a_periph(AT91_PIO_PORTC, 10, 0);	/* LCDD6 */
-	at91_set_a_periph(AT91_PIO_PORTC, 11, 0);	/* LCDD7 */
-	at91_set_a_periph(AT91_PIO_PORTC, 14, 0);	/* LCDD10 */
-	at91_set_a_periph(AT91_PIO_PORTC, 15, 0);	/* LCDD11 */
-	at91_set_a_periph(AT91_PIO_PORTC, 16, 0);	/* LCDD12 */
-	at91_set_b_periph(AT91_PIO_PORTC, 12, 0);	/* LCDD13 */
-	at91_set_a_periph(AT91_PIO_PORTC, 18, 0);	/* LCDD14 */
-	at91_set_a_periph(AT91_PIO_PORTC, 19, 0);	/* LCDD15 */
-	at91_set_a_periph(AT91_PIO_PORTC, 22, 0);	/* LCDD18 */
-	at91_set_a_periph(AT91_PIO_PORTC, 23, 0);	/* LCDD19 */
-	at91_set_a_periph(AT91_PIO_PORTC, 24, 0);	/* LCDD20 */
-	at91_set_b_periph(AT91_PIO_PORTC, 17, 0);	/* LCDD21 */
-	at91_set_a_periph(AT91_PIO_PORTC, 26, 0);	/* LCDD22 */
-	at91_set_a_periph(AT91_PIO_PORTC, 27, 0);	/* LCDD23 */
-	at91_set_pio_output(AT91_PIO_PORTA, 30, 1);	/* PCI */
-
-	writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
-}
-
-#ifdef CONFIG_LCD_INFO
-void lcd_show_board_info(void)
-{
-	ulong dram_size, nand_size;
-	int i;
-	char temp[32];
-
-	dram_size = 0;
-	for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
-		dram_size += gd->bd->bi_dram[i].size;
-	nand_size = 0;
-	for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
-		nand_size += nand_info[i].size;
-
-	lcd_printf("\n%s\n", U_BOOT_VERSION);
-	lcd_printf("CPU at %s MHz\n", strmhz(temp, get_cpu_clk_rate()));
-	lcd_printf("  %ld MB SDRAM, %ld MB NAND\n",
-		dram_size >> 20,
-		nand_size >> 20 );
-	lcd_printf("  Board            : esd ARM9 HMI Panel - OTC570\n");
-	lcd_printf("  Hardware-revision: 1.%d\n", get_hw_rev());
-	lcd_printf("  Mach-type        : %lu\n", gd->bd->bi_arch_number);
-}
-#endif /* CONFIG_LCD_INFO */
-#endif /* CONFIG_LCD */
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size(
-		(void *)CONFIG_SYS_SDRAM_BASE,
-		CONFIG_SYS_SDRAM_SIZE);
-	return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
-	int rc = 0;
-#ifdef CONFIG_MACB
-	rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
-#endif
-	return rc;
-}
-
-int checkboard(void)
-{
-	char str[32];
-
-	puts("Board            : esd ARM9 HMI Panel - OTC570");
-	if (getenv_f("serial#", str, sizeof(str)) > 0) {
-		puts(", serial# ");
-		puts(str);
-	}
-	printf("\n");
-	printf("Hardware-revision: 1.%d\n", get_hw_rev());
-	printf("Mach-type        : %lu\n", gd->bd->bi_arch_number);
-	return 0;
-}
-
-#ifdef CONFIG_SERIAL_TAG
-void get_board_serial(struct tag_serialnr *serialnr)
-{
-	char *str;
-
-	char *serial = getenv("serial#");
-	if (serial) {
-		str = strchr(serial, '_');
-		if (str && (strlen(str) >= 4)) {
-			serialnr->high = (*(str + 1) << 8) | *(str + 2);
-			serialnr->low = simple_strtoul(str + 3, NULL, 16);
-		}
-	} else {
-		serialnr->high = 0;
-		serialnr->low = 0;
-	}
-}
-#endif
-
-#ifdef CONFIG_REVISION_TAG
-u32 get_board_rev(void)
-{
-	return hw_rev | 0x100;
-}
-#endif
-
-#ifdef CONFIG_MISC_INIT_R
-int misc_init_r(void)
-{
-	char		str[64];
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	at91_set_pio_output(AT91_PIO_PORTA, 29, 1);
-	at91_set_a_periph(AT91_PIO_PORTA, 26, 1);	/* TXD0 */
-	at91_set_a_periph(AT91_PIO_PORTA, 27, 0);	/* RXD0 */
-	writel(1 << ATMEL_ID_USART0, &pmc->pcer);
-	/* Set USART_MODE = 1 (RS485) */
-	writel(1, 0xFFF8C004);
-
-	printf("USART0: ");
-
-	if (getenv_f("usart0", str, sizeof(str)) == -1) {
-		printf("No entry - assuming 1-wire\n");
-		/* CTS pin, works as mode select pin (0 = 1-wire; 1 = RS485) */
-		at91_set_pio_output(AT91_PIO_PORTA, 29, 0);
-	} else {
-		if (strcmp(str, "1-wire") == 0) {
-			printf("%s\n", str);
-			at91_set_pio_output(AT91_PIO_PORTA, 29, 0);
-		} else if (strcmp(str, "rs485") == 0) {
-			printf("%s\n", str);
-			at91_set_pio_output(AT91_PIO_PORTA, 29, 1);
-		} else {
-			printf("Wrong entry - assuming 1-wire ");
-			printf("(valid values are '1-wire' or 'rs485')\n");
-			at91_set_pio_output(AT91_PIO_PORTA, 29, 0);
-		}
-	}
-#ifdef CONFIG_LCD
-	printf("Display memory address: 0x%08lX\n", gd->fb_base);
-#endif
-
-	return 0;
-}
-#endif /* CONFIG_MISC_INIT_R */
-
-int board_early_init_f(void)
-{
-	at91_pmc_t	*pmc	= (at91_pmc_t *) ATMEL_BASE_PMC;
-
-	/* enable all clocks */
-	writel((1 << ATMEL_ID_PIOA) |
-		(1 << ATMEL_ID_PIOB) |
-		(1 << ATMEL_ID_PIOCDE) |
-		(1 << ATMEL_ID_TWI) |
-		(1 << ATMEL_ID_SPI0) |
-#ifdef CONFIG_LCD
-		(1 << ATMEL_ID_LCDC) |
-#endif
-		(1 << ATMEL_ID_UHP),
-		&pmc->pcer);
-
-	at91_seriald_hw_init();
-
-	/* arch number of OTC570-Board */
-	gd->bd->bi_arch_number = MACH_TYPE_OTC570;
-
-	return 0;
-}
-
-int board_init(void)
-{
-	/* initialize ET1100 Controller */
-	otc570_ethercat_hw_init();
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
-
-#ifdef CONFIG_CMD_NAND
-	otc570_nand_hw_init();
-#endif
-#ifdef CONFIG_HAS_DATAFLASH
-	at91_spi0_hw_init(1 << 0);
-#endif
-#ifdef CONFIG_MACB
-	otc570_macb_hw_init();
-#endif
-#ifdef CONFIG_AT91_CAN
-	at91_can_hw_init();
-#endif
-#ifdef CONFIG_USB_OHCI_NEW
-	at91_uhp_hw_init();
-#endif
-#ifdef CONFIG_LCD
-	otc570_lcd_hw_init();
-#endif
-	return 0;
-}
diff --git a/board/esd/otc570/partition.c b/board/esd/otc570/partition.c
deleted file mode 100644
index b6afafc..0000000
--- a/board/esd/otc570/partition.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf at atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
-	{CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0},	/* Logical adress, CS */
-};
-
-/* define the area offsets */
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
-	{0x00000000, 0x000041FF, FLAG_PROTECT_SET,   0, "Bootstrap"},
-	{0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
-	{0x00008400, 0x00041FFF, FLAG_PROTECT_SET,   0, "U-Boot"},
-};
diff --git a/configs/otc570_dataflash_defconfig b/configs/otc570_dataflash_defconfig
deleted file mode 100644
index c5ff59a..0000000
--- a/configs/otc570_dataflash_defconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_OTC570=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
diff --git a/configs/otc570_defconfig b/configs/otc570_defconfig
deleted file mode 100644
index 8cc55ee..0000000
--- a/configs/otc570_defconfig
+++ /dev/null
@@ -1,8 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_AT91=y
-CONFIG_TARGET_OTC570=y
-CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH"
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
diff --git a/include/configs/otc570.h b/include/configs/otc570.h
deleted file mode 100644
index 0cada63..0000000
--- a/include/configs/otc570.h
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * (C) Copyright 2010-2011
- * Daniel Gorsulowski <daniel.gorsulowski at esd.eu>
- * esd electronic system design gmbh <www.esd.eu>
- *
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian at popies.net>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Configuation settings for the esd OTC570 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * SoC must be defined first, before hardware.h is included.
- * In this case SoC is defined in boards.cfg.
- */
-#include <asm/hardware.h>
-
-/*
- * Warning: changing CONFIG_SYS_TEXT_BASE requires
- * adapting the initial boot program.
- * Since the linker has to swallow that define, we must use a pure
- * hex number here!
- */
-#define CONFIG_SYS_TEXT_BASE		0x20002000
-
-/*
- * since a number of boards are not being listed in linux
- * arch/arm/tools/mach-types any more, the mach-types have to be
- * defined here
- */
-#define MACH_TYPE_OTC570		2166
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_SLOW_CLOCK	32768	/* 32.768 kHz crystal */
-#define CONFIG_SYS_AT91_MAIN_CLOCK	16000000/* 16.0 MHz crystal */
-
-/* Misc CPU related */
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_BOARD_EARLY_INIT_F		/* call board_early_init_f() */
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_SERIAL_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
-#define CONFIG_MISC_INIT_R			/* Call misc_init_r */
-
-#define CONFIG_DISPLAY_BOARDINFO		/* call checkboard() */
-#define CONFIG_DISPLAY_CPUINFO			/* display cpu info and speed */
-#define CONFIG_PREBOOT				/* enable preboot variable */
-
-/*
- * Hardware drivers
- */
-
-/* required until arch/arm/include/asm/arch-at91/at91sam9263.h is reworked */
-#define ATMEL_PMC_UHP			AT91SAM926x_PMC_UHP
-
-/* general purpose I/O */
-#define CONFIG_AT91_GPIO
-
-/* Console output */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
-#define CONFIG_USART_ID			ATMEL_ID_SYS
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_BOOTDELAY		3
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-
-/* LCD */
-#define CONFIG_LCD
-#undef CONFIG_SPLASH_SCREEN
-
-#ifdef CONFIG_LCD
-# define LCD_BPP			LCD_COLOR8
-
-# ifndef CONFIG_SPLASH_SCREEN
-#  define CONFIG_LCD_LOGO
-#  define CONFIG_LCD_INFO
-#  undef CONFIG_LCD_INFO_BELOW_LOGO
-# endif /* CONFIG_SPLASH_SCREEN */
-
-# undef LCD_TEST_PATTERN
-# define CONFIG_SYS_WHITE_ON_BLACK
-# define CONFIG_ATMEL_LCD
-# define CONFIG_SYS_CONSOLE_IS_IN_ENV
-# define CONFIG_OTC570_LCD_BASE		(CONFIG_SYS_SDRAM_BASE + 0x03fa5000)
-# define CONFIG_CMD_BMP
-#endif /* CONFIG_LCD */
-
-/* RTC and I2C stuff */
-#define CONFIG_RTC_DS1338
-#define CONFIG_SYS_I2C_RTC_ADDR		0x68
-
-#define CONFIG_SYS_I2C
-#define	CONFIG_SYS_I2C_SOFT	/* I2C bit-banged	*/
-#ifdef CONFIG_SYS_I2C_SOFT
-#define CONFIG_SYS_I2C_SOFT_SPEED	100000
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0x7F
-
-/* Configure data and clock pins for pio */
-# define I2C_INIT { \
-	at91_set_pio_output(AT91_PIO_PORTB, 4, 0); \
-	at91_set_pio_output(AT91_PIO_PORTB, 5, 0); \
-}
-# define I2C_SOFT_DECLARATIONS
-/* Configure data pin as output */
-# define I2C_ACTIVE		at91_set_pio_output(AT91_PIO_PORTB, 4, 0)
-/* Configure data pin as input */
-# define I2C_TRISTATE		at91_set_pio_input(AT91_PIO_PORTB, 4, 0)
-/* Read data pin */
-# define I2C_READ		at91_get_pio_value(AT91_PIO_PORTB, 4)
-/* Set data pin */
-# define I2C_SDA(bit)		at91_set_pio_value(AT91_PIO_PORTB, 4, bit)
-/* Set clock pin */
-# define I2C_SCL(bit)		at91_set_pio_value(AT91_PIO_PORTB, 5, bit)
-# define I2C_DELAY		udelay(2) /* 1/4 I2C clock duration */
-#endif /* CONFIG_SYS_I2C_SOFT */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_DATE
-
-/* LED */
-#define CONFIG_AT91_LED
-
-/*
- * SDRAM: 1 bank, min 32, max 128 MB
- * Initialized before u-boot gets started.
- */
-#define CONFIG_NR_DRAM_BANKS		1
-#define CONFIG_SYS_SDRAM_BASE		0x20000000 /* ATMEL_BASE_CS1 */
-#define CONFIG_SYS_SDRAM_SIZE		0x04000000
-
-#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + 0x00100000)
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x01E00000)
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x00100000)
-
-/*
- * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
- * leaving the correct space for initial global data structure above
- * that address while providing maximum stack area below.
- */
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(ATMEL_BASE_SRAM0 + 0x1000 - GENERATED_GBL_DATA_SIZE)
-
-/* DataFlash */
-#ifdef CONFIG_SYS_USE_DATAFLASH
-# define CONFIG_ATMEL_DATAFLASH_SPI
-# define CONFIG_HAS_DATAFLASH
-# define CONFIG_SYS_MAX_DATAFLASH_BANKS		1
-# define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000	/* CS0 */
-# define AT91_SPI_CLK				15000000
-# define DATAFLASH_TCSS				(0x1a << 16)
-# define DATAFLASH_TCHS				(0x1 << 24)
-#endif
-
-/* NOR flash is not populated, disable it */
-#define CONFIG_SYS_NO_FLASH
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-# define CONFIG_NAND_ATMEL
-# define CONFIG_SYS_MAX_NAND_DEVICE		1
-# define CONFIG_SYS_NAND_BASE			0x40000000 /* ATMEL_BASE_CS3 */
-# define CONFIG_SYS_NAND_DBW_8
-# define CONFIG_SYS_NAND_MASK_ALE		(1 << 21)
-# define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
-# define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PD(15)
-# define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(22)
-#endif
-
-/* Ethernet */
-#define CONFIG_MACB
-#define CONFIG_RMII
-#define CONFIG_FIT
-#define CONFIG_NET_RETRY_COUNT			20
-#undef CONFIG_RESET_PHY_R
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00a00000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9263"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_FAT
-
-/* CAN */
-#define CONFIG_AT91_CAN
-
-/* hw-controller addresses */
-#define CONFIG_ET1100_BASE		0x70000000 /* ATMEL_BASE_CS6 */
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env in dataflash on CS0 */
-# define CONFIG_ENV_IS_IN_DATAFLASH
-# define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
-					0x8400)
-# define CONFIG_ENV_OFFSET		0x4200
-# define CONFIG_ENV_ADDR		(CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
-					CONFIG_ENV_OFFSET)
-# define CONFIG_ENV_SIZE		0x4200
-
-#elif CONFIG_SYS_USE_NANDFLASH
-
-/* bootstrap + u-boot + env + linux in nandflash */
-# define CONFIG_ENV_IS_IN_NAND		1
-# define CONFIG_ENV_OFFSET		0xC0000
-# define CONFIG_ENV_SIZE		0x20000
-
-#endif
-
-#define CONFIG_SYS_CBSIZE		512
-#define CONFIG_SYS_MAXARGS		16
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + \
-					128*1024, 0x1000)
-
-#endif
-- 
2.5.0.457.gab17608



More information about the U-Boot mailing list