[U-Boot] [PATCH] t1040d4rdb: assign muxed pins to qe-tdm when set hwconfig qe-tdm

[Zhao Qiang]

> -----Original Message-----
> From: Kushwaha Prabhakar-B32579
> Sent: Thursday, August 27, 2015 4:23 PM
> To: Zhao Qiang-B45475
> Cc: u-boot at lists.denx.de; Sun York-R58495; Jain Priyanka-B32167
> Subject: RE: [PATCH] t1040d4rdb: assign muxed pins to qe-tdm when set
> hwconfig qe-tdm
> 
> 
> > -----Original Message-----
> > From: Zhao Qiang-B45475
> > Sent: Thursday, August 27, 2015 1:00 PM
> > To: Kushwaha Prabhakar-B32579 <prabhakar at freescale.com>
> > Cc: u-boot at lists.denx.de; Sun York-R58495 <yorksun at freescale.com>;
> > Jain
> > Priyanka-B32167 <Priyanka.Jain at freescale.com>
> > Subject: RE: [PATCH] t1040d4rdb: assign muxed pins to qe-tdm when set
> > hwconfig qe-tdm
> >
> > On Thu 8/27/2015 2:36 pm, Kushwaha Prabhakar-B32579 wrote:
> > > -----Original Message-----
> > > From: Kushwaha Prabhakar-B32579
> > > Sent: Thursday, August 27, 2015 2:36 PM
> > > To: Zhao Qiang-B45475
> > > Cc: u-boot at lists.denx.de; Sun York-R58495; Jain Priyanka-B32167;
> > > Zhao
> > > Qiang-B45475
> > > Subject: RE: [PATCH] t1040d4rdb: assign muxed pins to qe-tdm when
> > > set hwconfig qe-tdm
> > >
> > > > -----Original Message-----
> > > > From: Zhao Qiang [mailto:qiang.zhao at freescale.com]
> > > > Sent: Thursday, August 27, 2015 10:56 AM
> > > > To: Kushwaha Prabhakar-B32579 <prabhakar at freescale.com>
> > > > Cc: u-boot at lists.denx.de; Sun York-R58495 <yorksun at freescale.com>;
> > > > Jain
> > > > Priyanka-B32167 <Priyanka.Jain at freescale.com>; Zhao Qiang-B45475
> > > > <qiang.zhao at freescale.com>
> > > > Subject: [PATCH] t1040d4rdb: assign muxed pins to qe-tdm when set
> > > > hwconfig qe-tdm
> > > >
> > > > qe-tdm is muxed with diu, if hwconfig setted as qe-tdm, assign
> > > > muxed pins to qe-tdm, then delete diu node from device tree.
> > > >
> > > > Signed-off-by: Zhao Qiang <qiang.zhao at freescale.com>
> > > > ---
> > > >  board/freescale/t104xrdb/cpld.h     |  1 +
> > > >  board/freescale/t104xrdb/t104xrdb.c | 19 +++++++++++++++++++
> > > >  2 files changed, 20 insertions(+)
> > > >
> > > > diff --git a/board/freescale/t104xrdb/cpld.h
> > > > b/board/freescale/t104xrdb/cpld.h index 2fb4105..86de26c 100644
> > > > --- a/board/freescale/t104xrdb/cpld.h
> > > > +++ b/board/freescale/t104xrdb/cpld.h
> > > > @@ -44,3 +44,4 @@ void cpld_write(unsigned int reg, u8 value);
> > > >  		cpld_write(offsetof(struct cpld_data, reg), value)
> > > >  #define MISC_CTL_SG_SEL		0x80
> > > >  #define MISC_CTL_AURORA_SEL	0x02
> > > > +#define MISC_MUX_QE_TDM		0xc0
> > > > diff --git a/board/freescale/t104xrdb/t104xrdb.c
> > > > b/board/freescale/t104xrdb/t104xrdb.c
> > > > index d982dfc..1759d1f 100644
> > > > --- a/board/freescale/t104xrdb/t104xrdb.c
> > > > +++ b/board/freescale/t104xrdb/t104xrdb.c
> > > > @@ -6,6 +6,7 @@
> > > >
> > > >  #include <common.h>
> > > >  #include <command.h>
> > > > +#include <hwconfig.h>
> > > >  #include <netdev.h>
> > > >  #include <linux/compiler.h>
> > > >  #include <asm/mmu.h>
> > > > @@ -110,6 +111,12 @@ int misc_init_r(void)
> > > >  					 MISC_CTL_SG_SEL |
> > > > MISC_CTL_AURORA_SEL);
> > > >
> > > >  #if defined(CONFIG_T1040D4RDB)
> > > > +	if (hwconfig("qe-tdm")) {
> > > > +		CPLD_WRITE(sfp_ctl_status, CPLD_READ(sfp_ctl_status) |
> > > > +			   MISC_MUX_QE_TDM);
> > > > +		printf("QECSR : 0x%02x, mux to qe-tdm\n",
> > > > +		       CPLD_READ(sfp_ctl_status));
> > > > +	}
> > > >  	/* Mask all CPLD interrupt sources, except QSGMII interrupts
> */
> > > >  	if (CPLD_READ(sw_ver) < 0x03) {
> > > >  		debug("CPLD SW version 0x%02x doesn't support
> > int_mask\n", @@
> > > > -123,6 +130,16 @@ int misc_init_r(void)
> > > >  	return 0;
> > > >  }
> > > >
> > > > +void fdt_del_diu(void *blob)
> > > > +{
> > > > +	int nodeoff = 0;
> > > > +
> > > > +	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
> > > > +				"fsl,diu")) >= 0) {
> > > > +		fdt_del_node(blob, nodeoff);
> > > > +	}
> > > > +}
> > > > +
> > >
> > > Can this be moved in arch/powerpc for SoC to leverage this piece of
> code?
> >
> > How about to add new files arch/powerpc/include/asm/fdt.h and
> > arch/powerpc/lib/fdt.c, and put the code into the files, Or do you
> > have some better place to recommend?
> 
> We already have file " arch/powerpc/cpu/mpc85xx/fdt.c"

Where is the .h file?

> 
> --prabhakar