[U-Boot] [PATCH v2 5/9] dfu: tftp: update: Add dfu_write_from_mem_addr() function
Lukasz Majewski
l.majewski at majess.pl
Sun Aug 9 23:37:09 CEST 2015
Hi Simon,
> Hi Lukasz,
>
> On 25 July 2015 at 02:11, Lukasz Majewski <l.majewski at majess.pl>
> wrote:
> > This function allows writing via DFU data stored from fixed buffer
> > address (like e.g. loadaddr env variable).
> >
> > Such predefined buffers are used in the update_tftp() code. In fact
> > this function is a wrapper on the dfu_write() and dfu_flush().
> >
> > Signed-off-by: Lukasz Majewski <l.majewski at majess.pl>
> > ---
> > Changes for v2:
> > - Use min() macro instead of comparison
> > - Change definition of left variable to be unsigned long - this
> > allowed safe usage of min() macro
> > ---
> > drivers/dfu/dfu.c | 48
> > ++++++++++++++++++++++++++++++++++++++++++++++++ include/dfu.h
> > | 1 + 2 files changed, 49 insertions(+)
>
> Reviewed-by: Simon Glass <sjg at chromium.org>
>
> But see nits below.
>
> >
> > diff --git a/drivers/dfu/dfu.c b/drivers/dfu/dfu.c
> > index 2267dbf..c83ee41 100644
> > --- a/drivers/dfu/dfu.c
> > +++ b/drivers/dfu/dfu.c
> > @@ -568,3 +568,51 @@ int dfu_get_alt(char *name)
> >
> > return -ENODEV;
> > }
> > +
> > +/**
> > + * dfu_write_from_mem_addr - this function adds support for
> > writing data
> > + * starting from fixed memory address
> > (like $loadaddr)
> > + * to dfu managed medium (e.g. NAND, MMC)
>
> I think it's better to start with a direct one-line description, like:
>
> + * dfu_write_from_mem_addr - wite data to dfu-managed medium
> + *
> + * More detail goes here ...
Ok
>
> > + *
> > + * @param dfu - dfu entity to which we want to store data
> > + * @param buf - fixed memory addres from where data starts
> > + * @param size - number of bytes to write
> > + *
> > + * @return - 0 on success, other value on failure
> > + */
> > +int dfu_write_from_mem_addr(struct dfu_entity *dfu, void *buf, int
> > size)
>
> const void *buf? My understanding is that this buffer is not changed.
In principle I agree with you.
For practical reasons, I would opt for leaving the buf definition as
void *, since other functions (like globally visible dfu_write) uses
this buffer as void *.
Adding const there would require removing this qualifier in the line
[1] since then dp pointer is passed to dfu_write(), which requires void
* pointer.
>
> > +{
> > + unsigned long dfu_buf_size, write, left = size;
> > + int i, ret = 0;
> > + void *dp = buf;
^^^^^^^^^^^^^^^^ [1]
> > +
> > + /*
> > + * Here we must call dfu_get_buf(dfu) first to be sure that
> > dfu_buf_size
> > + * has been properly initialized - e.g. if "dfu_bufsiz" has
> > been taken
> > + * into account.
> > + */
> > + dfu_get_buf(dfu);
> > + dfu_buf_size = dfu_get_buf_size();
> > + debug("%s: dfu buf size: %lu\n", __func__, dfu_buf_size);
> > +
> > + for (i = 0; left > 0; i++) {
> > + write = min(dfu_buf_size, left);
> > +
> > + debug("%s: dp: 0x%p left: %lu write: %lu\n",
> > __func__,
> > + dp, left, write);
> > + ret = dfu_write(dfu, dp, write, i);
> > + if (ret) {
> > + error("DFU write failed\n");
> > + return ret;
> > + }
> > +
> > + dp += write;
> > + left -= write;
> > + }
> > +
> > + ret = dfu_flush(dfu, NULL, 0, i);
> > + if (ret)
> > + error("DFU flush failed!");
> > +
> > + return ret;
> > +}
> > diff --git a/include/dfu.h b/include/dfu.h
> > index 7f78cc2..e624c41 100644
> > --- a/include/dfu.h
> > +++ b/include/dfu.h
> > @@ -162,6 +162,7 @@ bool dfu_usb_get_reset(void);
> > int dfu_read(struct dfu_entity *de, void *buf, int size, int
> > blk_seq_num); int dfu_write(struct dfu_entity *de, void *buf, int
> > size, int blk_seq_num); int dfu_flush(struct dfu_entity *de, void
> > *buf, int size, int blk_seq_num);
>
> Please can you put your function comment here in the header?
ok
>
> > +int dfu_write_from_mem_addr(struct dfu_entity *dfu, void *buf, int
> > size); /* Device specific */
> > #ifdef CONFIG_DFU_MMC
> > extern int dfu_fill_entity_mmc(struct dfu_entity *dfu, char
> > *devstr, char *s); --
> > 2.1.4
> >
>
> Regards,
> Simon
Best regards,
Lukasz Majewski
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150809/a28d0aa0/attachment.sig>
More information about the U-Boot
mailing list