[U-Boot] [PATCH v2 4/6] net: e1000: Add Kconfig options
Simon Glass
sjg at chromium.org
Tue Aug 11 15:39:27 CEST 2015
Add Kconfig options in preparation for moving boards to use Kconfig.
Signed-off-by: Simon Glass <sjg at chromium.org>
---
Changes in v2:
- Move the Kconfig additions to a new patch
drivers/net/Kconfig | 39 +++++++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index ce76a02..fcc3d9b 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -20,6 +20,45 @@ menuconfig NETDEVICES
if NETDEVICES
+config E1000
+ bool "Intel PRO/1000 Gigabit Ethernet support"
+ help
+ This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+config E1000_SPI_GENERIC
+ bool "Allow access to the Intel 8257x SPI bus"
+ depends on E1000
+ help
+ Allow generic access to the SPI bus on the Intel 8257x, for
+ example with the "sspi" command.
+
+config E1000_SPI
+ bool "Enable SPI bus utility code"
+ depends on E1000
+ help
+ Utility code for direct access to the SPI bus on Intel 8257x.
+ This does not do anything useful unless you set at least one
+ of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
+
+config E1000_FALLBACK_MAC
+ bool "Default MAC address for empty EEPROM after production"
+ depends on E1000
+ help
+ Use this to define a fallback MAC address for when none is available
+ in the device EEPROM or U-Boot environment variables.
+
+config CMD_E1000
+ bool "Enable the e1000 command"
+ depends on E1000
+ help
+ This enables the 'e1000' management command for E1000 devices. When
+ used on devices with SPI support you can reprogram the EEPROM from
+ U-Boot.
+
config ETH_SANDBOX
depends on DM_ETH && SANDBOX
default y
--
2.5.0.rc2.392.g76e840b
More information about the U-Boot
mailing list