[U-Boot] [PATCH 5/5] arm: spear: Some changes / updates to the x600 config header

[Stefan Roese]

This patch brings the following changes to the x600 board support:

- Add USB EHCI support
- Add VFAT support for USB key file access
- Increase malloc size (for UBI / UBIFS usage)
- Enable Thumb mode to save some image space
- Remove unreferenced CONFIG_STACKSIZE
- Remove unreferenced CONFIG_SPL_NO_PRINTF

Signed-off-by: Stefan Roese <sr at denx.de>
Cc: Viresh Kumar <viresh.kumar at linaro.org>
Cc: Vipin Kumar <vk.vipin at gmail.com>
---
 include/configs/x600.h | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

diff --git a/include/configs/x600.h b/include/configs/x600.h
index 70e633c..6a57388 100644
--- a/include/configs/x600.h
+++ b/include/configs/x600.h
@@ -30,6 +30,7 @@
 #define CONFIG_SYS_SPL_LEN			CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_UBOOT_BASE			(CONFIG_SYS_FLASH_BASE + \
 						 CONFIG_SYS_SPL_LEN)
+#define CONFIG_SYS_UBOOT_START			CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_BASE			CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN			0x60000
 
@@ -98,6 +99,12 @@
 #define CONFIG_FPGA_SPARTAN3
 #define CONFIG_FPGA_COUNT	1
 
+/* USB EHCI options */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_SPEAR
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
+
 /*
  * Command support defines
  */
@@ -105,7 +112,9 @@
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_ENV
+#define CONFIG_CMD_FAT
 #define CONFIG_CMD_FPGA_LOADMK
+#define CONFIG_CMD_FS_GENERIC
 #define CONFIG_CMD_GPIO
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
@@ -115,8 +124,13 @@
 #define CONFIG_CMD_SAVES
 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_USB
 #define CONFIG_LZO
 
+/* Filesystem support (for USB key) */
+#define CONFIG_SUPPORT_VFAT
+#define CONFIG_DOS_PARTITION
+
 #define CONFIG_BOOTDELAY			3
 
 #define CONFIG_SYS_HUSH_PARSER			/* Use the HUSH parser	*/
@@ -148,10 +162,11 @@
 
 #define CONFIG_SYS_MEMTEST_START		0x00800000
 #define CONFIG_SYS_MEMTEST_END			0x04000000
-#define CONFIG_SYS_MALLOC_LEN			(1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN			(8 << 20)
 #define CONFIG_IDENT_STRING			"-SPEAr"
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE			256
 #define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
 						 sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -240,9 +255,6 @@
 	"bootcmd=run nand_ubifs\0"					\
 	"\0"
 
-/* Stack sizes */
-#define CONFIG_STACKSIZE			(512 * 1024)
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS			1
 #define PHYS_SDRAM_1				0x00000000
@@ -274,7 +286,6 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_LIBCOMMON_SUPPORT	/* image.c */
 #define CONFIG_SPL_LIBGENERIC_SUPPORT	/* string.c */
-#define CONFIG_SPL_NO_PRINTF
 
 /*
  * Please select/define only one of the following
-- 
2.4.8