[U-Boot] [PATCH] arm: armv8 correct value passed to __asm_dcache_all

[Peng Fan]

>From source code comments:
"x0: 0 flush & invalidate, 1 invalidate only"

Current value 0xffff can make invalidate work, since we only judge whether
input value is 0 or not, see following code:
"
    tbz     w1, #0, 1f
    dc      isw, x9
    b       2f
1:  dc      cisw, x9      /* clean & invalidate by set/way */
2:  subs    x6, x6, #1    /* decrement the way */
"

Later we may add "2 clean only" support. So following the comments,
correct value from 0xffff to 1.

Signed-off-by: Peng Fan <Peng.Fan at freescale.com>
Cc: York Sun <yorksun at freescale.com>
Cc: Albert Aribaud <albert.u.boot at aribaud.net>
---

Note:
The patch was done when I was reading the source code.
Since I do not have a board support armv8, I do not test this patch
on real board.

 arch/arm/cpu/armv8/cache.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv8/cache.S b/arch/arm/cpu/armv8/cache.S
index d846236..ab8c089 100644
--- a/arch/arm/cpu/armv8/cache.S
+++ b/arch/arm/cpu/armv8/cache.S
@@ -112,7 +112,7 @@ ENDPROC(__asm_flush_dcache_all)
 
 ENTRY(__asm_invalidate_dcache_all)
 	mov	x16, lr
-	mov	x0, #0xffff
+	mov	x0, #0x1
 	bl	__asm_dcache_all
 	mov	lr, x16
 	ret
-- 
1.8.4